[serial] 增加serial_v2版本的框架和基于stm32的串口驱动

8 files changed, 1576 insertions, 28 deletions

diff --git a/bsp/stm32/libraries/HAL_Drivers/SConscript b/bsp/stm32/libraries/HAL_Drivers/SConscript
index e41a1f0141..dabcc7002c 100644
--- a/bsp/stm32/libraries/HAL_Drivers/SConscript
+++ b/bsp/stm32/libraries/HAL_Drivers/SConscript
@@ -12,7 +12,10 @@ if GetDepend(['RT_USING_PIN']):
     src += ['drv_gpio.c']
 
 if GetDepend(['RT_USING_SERIAL']):
-    src += ['drv_usart.c']
+    if GetDepend(['RT_USING_SERIAL_V2']):
+        src += ['drv_usart_v2.c']
+    else:
+        src += ['drv_usart.c']
 
 if GetDepend(['RT_USING_HWTIMER']):
     src += ['drv_hwtimer.c']
diff --git a/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h b/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
index 0762f9048d..0064309f2e 100644
--- a/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
+++ b/bsp/stm32/libraries/HAL_Drivers/config/l4/dma_config.h
@@ -127,6 +127,17 @@ extern "C" {
 #endif
 
 /* DMA1 channel7 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler         DMA1_Channel7_IRQHandler
+#define UART2_TX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE           DMA1_Channel7
+#if defined(DMAMUX1) /* for L4+ */
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_USART2_TX
+#else /* for L4 */
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART2_TX_DMA_IRQ                DMA1_Channel7_IRQn
+#endif
 
 /* DMA2 channel1 */
 #if defined(BSP_UART5_TX_USING_DMA) && !defined(UART5_TX_DMA_INSTANCE)
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_common.c b/bsp/stm32/libraries/HAL_Drivers/drv_common.c
index 74007b6e88..134eb7b3df 100644
--- a/bsp/stm32/libraries/HAL_Drivers/drv_common.c
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_common.c
@@ -12,8 +12,12 @@
 #include "board.h"
 
 #ifdef RT_USING_SERIAL
+#ifdef RT_USING_SERIAL_V2
+#include "drv_usart_v2.h"
+#else
 #include "drv_usart.h"
 #endif
+#endif
 
 #ifdef RT_USING_FINSH
 #include <finsh.h>
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
new file mode 100644
index 0000000000..51dfc425c4
--- /dev/null
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c
@@ -0,0 +1,1137 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-06-01     KyleChan     first version
+ */
+
+#include "board.h"
+#include "drv_usart_v2.h"
+
+#ifdef RT_USING_SERIAL_V2
+
+//#define DRV_DEBUG
+#define DBG_TAG              "drv.usart"
+#ifdef DRV_DEBUG
+#define DBG_LVL               DBG_LOG
+#else
+#define DBG_LVL               DBG_INFO
+#endif /* DRV_DEBUG */
+#include <rtdbg.h>
+
+#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && \
+    !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5) && !defined(BSP_USING_UART6) && \
+    !defined(BSP_USING_UART7) && !defined(BSP_USING_UART8) && !defined(BSP_USING_LPUART1)
+    #error "Please define at least one BSP_USING_UARTx"
+    /* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
+#endif
+
+#ifdef RT_SERIAL_USING_DMA
+    static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag);
+#endif
+
+enum
+{
+#ifdef BSP_USING_UART1
+    UART1_INDEX,
+#endif
+
+#ifdef BSP_USING_UART2
+    UART2_INDEX,
+#endif
+
+#ifdef BSP_USING_UART3
+    UART3_INDEX,
+#endif
+
+#ifdef BSP_USING_UART4
+    UART4_INDEX,
+#endif
+
+#ifdef BSP_USING_UART5
+    UART5_INDEX,
+#endif
+
+#ifdef BSP_USING_UART6
+    UART6_INDEX,
+#endif
+
+#ifdef BSP_USING_UART7
+    UART7_INDEX,
+#endif
+
+#ifdef BSP_USING_UART8
+    UART8_INDEX,
+#endif
+
+#ifdef BSP_USING_LPUART1
+    LPUART1_INDEX,
+#endif
+};
+
+static struct stm32_uart_config uart_config[] =
+{
+#ifdef BSP_USING_UART1
+    UART1_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART2
+    UART2_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART3
+    UART3_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART4
+    UART4_CONFIG,
+#endif
+#ifdef BSP_USING_UART5
+    UART5_CONFIG,
+#endif
+#ifdef BSP_USING_UART6
+    UART6_CONFIG,
+#endif
+#ifdef BSP_USING_UART7
+    UART7_CONFIG,
+#endif
+#ifdef BSP_USING_UART8
+    UART8_CONFIG,
+#endif
+#ifdef BSP_USING_LPUART1
+    LPUART1_CONFIG,
+#endif
+};
+
+
+static struct stm32_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
+
+static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    uart->handle.Instance          = uart->config->Instance;
+    uart->handle.Init.BaudRate     = cfg->baud_rate;
+    uart->handle.Init.HwFlowCtl    = UART_HWCONTROL_NONE;
+    uart->handle.Init.Mode         = UART_MODE_TX_RX;
+    uart->handle.Init.OverSampling = UART_OVERSAMPLING_16;
+
+    if(uart->handle.Instance == USART3)
+    {
+        uart->handle.Init.HwFlowCtl    = UART_HWCONTROL_RTS_CTS;
+    }
+
+    switch (cfg->data_bits)
+    {
+    case DATA_BITS_8:
+        if (cfg->parity == PARITY_ODD || cfg->parity == PARITY_EVEN)
+            uart->handle.Init.WordLength = UART_WORDLENGTH_9B;
+        else
+            uart->handle.Init.WordLength = UART_WORDLENGTH_8B;
+        break;
+    case DATA_BITS_9:
+        uart->handle.Init.WordLength = UART_WORDLENGTH_9B;
+        break;
+    default:
+        uart->handle.Init.WordLength = UART_WORDLENGTH_8B;
+        break;
+    }
+
+    switch (cfg->stop_bits)
+    {
+    case STOP_BITS_1:
+        uart->handle.Init.StopBits   = UART_STOPBITS_1;
+        break;
+    case STOP_BITS_2:
+        uart->handle.Init.StopBits   = UART_STOPBITS_2;
+        break;
+    default:
+        uart->handle.Init.StopBits   = UART_STOPBITS_1;
+        break;
+    }
+
+    switch (cfg->parity)
+    {
+    case PARITY_NONE:
+        uart->handle.Init.Parity     = UART_PARITY_NONE;
+        break;
+    case PARITY_ODD:
+        uart->handle.Init.Parity     = UART_PARITY_ODD;
+        break;
+    case PARITY_EVEN:
+        uart->handle.Init.Parity     = UART_PARITY_EVEN;
+        break;
+    default:
+        uart->handle.Init.Parity     = UART_PARITY_NONE;
+        break;
+    }
+
+#ifdef RT_SERIAL_USING_DMA
+    uart->dma_rx.remaining_cnt = serial->config.rx_bufsz;
+#endif
+
+    if (HAL_UART_Init(&uart->handle) != HAL_OK)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct stm32_uart *uart;
+
+    rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if(ctrl_arg & (RT_DEVICE_FLAG_RX_BLOCKING | RT_DEVICE_FLAG_RX_NON_BLOCKING))
+    {
+        if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_RX)
+            ctrl_arg = RT_DEVICE_FLAG_DMA_RX;
+        else
+            ctrl_arg = RT_DEVICE_FLAG_INT_RX;
+    }
+    else if(ctrl_arg & (RT_DEVICE_FLAG_TX_BLOCKING | RT_DEVICE_FLAG_TX_NON_BLOCKING))
+    {
+        if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_TX)
+            ctrl_arg = RT_DEVICE_FLAG_DMA_TX;
+        else
+            ctrl_arg = RT_DEVICE_FLAG_INT_TX;
+    }
+
+    switch (cmd)
+    {
+    /* disable interrupt */
+    case RT_DEVICE_CTRL_CLR_INT:
+
+        NVIC_DisableIRQ(uart->config->irq_type);
+        if (ctrl_arg == RT_DEVICE_FLAG_INT_RX)
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_RXNE);
+        else if (ctrl_arg == RT_DEVICE_FLAG_INT_TX)
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+#ifdef RT_SERIAL_USING_DMA
+        else if (ctrl_arg == RT_DEVICE_FLAG_DMA_RX)
+        {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_RXNE);
+
+            HAL_NVIC_DisableIRQ(uart->config->dma_rx->dma_irq);
+            if (HAL_DMA_Abort(&(uart->dma_rx.handle)) != HAL_OK)
+            {
+                RT_ASSERT(0);
+            }
+
+            if (HAL_DMA_DeInit(&(uart->dma_rx.handle)) != HAL_OK)
+            {
+                RT_ASSERT(0);
+            }
+        }
+        else if(ctrl_arg == RT_DEVICE_FLAG_DMA_TX)
+        {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TC);
+
+            HAL_NVIC_DisableIRQ(uart->config->dma_tx->dma_irq);
+            if (HAL_DMA_DeInit(&(uart->dma_tx.handle)) != HAL_OK)
+            {
+                RT_ASSERT(0);
+            }
+        }
+#endif
+        break;
+
+    case RT_DEVICE_CTRL_SET_INT:
+
+        HAL_NVIC_SetPriority(uart->config->irq_type, 1, 0);
+        HAL_NVIC_EnableIRQ(uart->config->irq_type);
+
+        if (ctrl_arg == RT_DEVICE_FLAG_INT_RX)
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_RXNE);
+        else if (ctrl_arg == RT_DEVICE_FLAG_INT_TX)
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_TXE);
+        break;
+
+    case RT_DEVICE_CTRL_CONFIG:
+        if (ctrl_arg & (RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX))
+        {
+
+#ifdef RT_SERIAL_USING_DMA
+            stm32_dma_config(serial, ctrl_arg);
+#endif
+        }
+        else
+            stm32_control(serial, RT_DEVICE_CTRL_SET_INT, (void *)ctrl_arg);
+        break;
+
+    case RT_DEVICE_CHECK_OPTMODE:
+        {
+            if (ctrl_arg & RT_DEVICE_FLAG_DMA_TX)
+                return RT_SERIAL_TX_BLOCKING_NO_BUFFER;
+            else
+                return RT_SERIAL_TX_BLOCKING_BUFFER;
+        }
+    case RT_DEVICE_CTRL_CLOSE:
+        if (HAL_UART_DeInit(&(uart->handle)) != HAL_OK )
+        {
+            RT_ASSERT(0)
+        }
+        break;
+
+    }
+    return RT_EOK;
+}
+
+static int stm32_putc(struct rt_serial_device *serial, char c)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    while (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) == RESET);
+    UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+    UART_SET_TDR(&uart->handle, c);
+
+    return 1;
+}
+
+static int stm32_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    struct stm32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    ch = -1;
+    if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET)
+        ch = UART_GET_RDR(&uart->handle);
+    return ch;
+}
+
+static rt_size_t stm32_transmit(struct rt_serial_device     *serial,
+                                       rt_uint8_t           *buf,
+                                       rt_size_t             size,
+                                       rt_uint32_t           tx_flag)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(buf != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_TX)
+    {
+        HAL_UART_Transmit_DMA(&uart->handle, buf, size);
+        return size;
+    }
+
+    stm32_control(serial, RT_DEVICE_CTRL_SET_INT, (void *)tx_flag);
+
+    return size;
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static void dma_recv_isr(struct rt_serial_device *serial, rt_uint8_t isr_flag)
+{
+    struct stm32_uart *uart;
+    rt_base_t level;
+    rt_uint16_t recv_len = 0;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    struct rt_serial_rx_fifo *rx_fifo;
+    rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+    RT_ASSERT(rx_fifo != RT_NULL);
+
+    level = rt_hw_interrupt_disable();
+    rt_uint16_t index = __HAL_DMA_GET_COUNTER(&(uart->dma_rx.handle));
+    switch (isr_flag)
+    {
+
+    case UART_RX_DMA_IT_TC_FLAG:
+        if(index >= uart->dma_rx.remaining_cnt)
+            recv_len = serial->config.rx_bufsz + uart->dma_rx.remaining_cnt - index;
+        break;
+
+    case UART_RX_DMA_IT_HT_FLAG:
+    case UART_RX_DMA_IT_IDLE_FLAG:
+        if(index < uart->dma_rx.remaining_cnt)
+            recv_len = uart->dma_rx.remaining_cnt - index;
+        break;
+
+    default:
+        break;
+    }
+
+    uart->dma_rx.remaining_cnt = index;
+    rt_serial_update_write_index(&(rx_fifo->rb), recv_len);
+    rt_hw_interrupt_enable(level);
+
+}
+#endif  /* RT_SERIAL_USING_DMA */
+
+
+/**
+ * Uart common interrupt process. This need add to uart ISR.
+ *
+ * @param serial serial device
+ */
+static void uart_isr(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    /* If the Read data register is not empty and the RXNE interrupt is enabled  （RDR） */
+    if ((__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET) &&
+            (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_RXNE) != RESET))
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), UART_GET_RDR(&uart->handle));
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+    /* If the Transmit data register is empty and the TXE interrupt enable is enabled  （TDR）*/
+    else if ((__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) != RESET) &&
+                (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_TXE)) != RESET)
+    {
+        struct rt_serial_tx_fifo *tx_fifo;
+        tx_fifo = (struct rt_serial_tx_fifo *) serial->serial_tx;
+        RT_ASSERT(tx_fifo != RT_NULL);
+
+        rt_uint8_t put_char = 0;
+        if (rt_ringbuffer_getchar(&(tx_fifo->rb), &put_char))
+        {
+            UART_SET_TDR(&uart->handle, put_char);
+        }
+        else
+        {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_TC);
+        }
+    }
+    else if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) &&
+            (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_TC) != RESET))
+    {
+        if (uart->uart_dma_flag & RT_DEVICE_FLAG_DMA_TX)
+        {
+            /* The HAL_UART_TxCpltCallback will be triggered */
+            HAL_UART_IRQHandler(&(uart->handle));
+        }
+        else
+        {
+            /* Transmission complete interrupt disable ( CR1 Register) */
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TC);
+            rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
+        }
+        /* Clear Transmission complete interrupt flag ( ISR Register ) */
+        UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+    }
+
+#ifdef RT_SERIAL_USING_DMA
+    else if ((uart->uart_dma_flag) && (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_IDLE) != RESET)
+             && (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_IDLE) != RESET))
+    {
+        dma_recv_isr(serial, UART_RX_DMA_IT_IDLE_FLAG);
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+        __HAL_UART_CLEAR_IDLEFLAG(&uart->handle);
+    }
+#endif
+    else
+    {
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_ORE) != RESET)
+        {
+            __HAL_UART_CLEAR_OREFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_NE) != RESET)
+        {
+            __HAL_UART_CLEAR_NEFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_FE) != RESET)
+        {
+            __HAL_UART_CLEAR_FEFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_PE) != RESET)
+        {
+            __HAL_UART_CLEAR_PEFLAG(&uart->handle);
+        }
+#if !defined(SOC_SERIES_STM32L4) && !defined(SOC_SERIES_STM32WL) && !defined(SOC_SERIES_STM32F7) && !defined(SOC_SERIES_STM32F0) \
+    && !defined(SOC_SERIES_STM32L0) && !defined(SOC_SERIES_STM32G0) && !defined(SOC_SERIES_STM32H7) \
+    && !defined(SOC_SERIES_STM32G4) && !defined(SOC_SERIES_STM32MP1) && !defined(SOC_SERIES_STM32WB)
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBD) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBD);
+        }
+#endif
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_CTS) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_CTS);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TXE);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_RXNE);
+        }
+    }
+}
+
+#if defined(BSP_USING_UART1)
+void USART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART1_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA)
+void UART1_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART1_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA)
+void UART1_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART1_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA) */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+void USART2_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART2_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA)
+void UART2_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART2_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA)
+void UART2_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART2_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART2_TX_USING_DMA) */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+void USART3_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART3_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_RX_USING_DMA)
+void UART3_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART3_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_RX) && defined(BSP_UART3_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART3_TX_USING_DMA)
+void UART3_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART3_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_TX) && defined(BSP_UART3_TX_USING_DMA) */
+#endif /* BSP_USING_UART3*/
+
+#if defined(BSP_USING_UART4)
+void UART4_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART4_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_RX_USING_DMA)
+void UART4_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART4_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_RX) && defined(BSP_UART4_RX_USING_DMA) */
+
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART4_TX_USING_DMA)
+void UART4_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART4_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(BSP_UART_USING_DMA_TX) && defined(BSP_UART4_TX_USING_DMA) */
+#endif /* BSP_USING_UART4*/
+
+#if defined(BSP_USING_UART5)
+void UART5_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART5_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA)
+void UART5_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART5_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_TX_USING_DMA)
+void UART5_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART5_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_TX_USING_DMA) */
+#endif /* BSP_USING_UART5*/
+
+#if defined(BSP_USING_UART6)
+void USART6_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART6_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_RX_USING_DMA)
+void UART6_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART6_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_TX_USING_DMA)
+void UART6_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART6_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART6_TX_USING_DMA) */
+#endif /* BSP_USING_UART6*/
+
+#if defined(BSP_USING_UART7)
+void UART7_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART7_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_RX_USING_DMA)
+void UART7_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART7_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_TX_USING_DMA)
+void UART7_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART7_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART7_TX_USING_DMA) */
+#endif /* BSP_USING_UART7*/
+
+#if defined(BSP_USING_UART8)
+void UART8_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART8_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_RX_USING_DMA)
+void UART8_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART8_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_TX_USING_DMA)
+void UART8_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART8_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART8_TX_USING_DMA) */
+#endif /* BSP_USING_UART8*/
+
+#if defined(BSP_USING_LPUART1)
+void LPUART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[LPUART1_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_LPUART1_RX_USING_DMA)
+void LPUART1_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[LPUART1_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_LPUART1_RX_USING_DMA) */
+#endif /* BSP_USING_LPUART1*/
+static void stm32_uart_get_config(void)
+{
+    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
+#ifdef BSP_USING_UART1
+    uart_obj[UART1_INDEX].serial.config = config;
+    uart_obj[UART1_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART1_INDEX].serial.config.rx_bufsz = BSP_UART1_RX_BUFSIZE;
+    uart_obj[UART1_INDEX].serial.config.tx_bufsz = BSP_UART1_TX_BUFSIZE;
+
+#ifdef BSP_UART1_RX_USING_DMA
+    uart_obj[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart1_dma_rx = UART1_DMA_RX_CONFIG;
+    uart_config[UART1_INDEX].dma_rx = &uart1_dma_rx;
+#endif
+
+#ifdef BSP_UART1_TX_USING_DMA
+    uart_obj[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart1_dma_tx = UART1_DMA_TX_CONFIG;
+    uart_config[UART1_INDEX].dma_tx = &uart1_dma_tx;
+#endif
+#endif
+
+#ifdef BSP_USING_UART2
+    uart_obj[UART2_INDEX].serial.config = config;
+    uart_obj[UART2_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART2_INDEX].serial.config.rx_bufsz = BSP_UART2_RX_BUFSIZE;
+    uart_obj[UART2_INDEX].serial.config.tx_bufsz = BSP_UART2_TX_BUFSIZE;
+
+#ifdef BSP_UART2_RX_USING_DMA
+    uart_obj[UART2_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart2_dma_rx = UART2_DMA_RX_CONFIG;
+    uart_config[UART2_INDEX].dma_rx = &uart2_dma_rx;
+#endif
+
+#ifdef BSP_UART2_TX_USING_DMA
+    uart_obj[UART2_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart2_dma_tx = UART2_DMA_TX_CONFIG;
+    uart_config[UART2_INDEX].dma_tx = &uart2_dma_tx;
+#endif
+#endif
+
+#ifdef BSP_USING_UART3
+    uart_obj[UART3_INDEX].serial.config = config;
+    uart_obj[UART3_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART3_INDEX].serial.config.rx_bufsz = BSP_UART3_RX_BUFSIZE;
+    uart_obj[UART3_INDEX].serial.config.tx_bufsz = BSP_UART3_TX_BUFSIZE;
+
+#ifdef BSP_UART3_RX_USING_DMA
+    uart_obj[UART3_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart3_dma_rx = UART3_DMA_RX_CONFIG;
+    uart_config[UART3_INDEX].dma_rx = &uart3_dma_rx;
+#endif
+
+#ifdef BSP_UART3_TX_USING_DMA
+    uart_obj[UART3_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart3_dma_tx = UART3_DMA_TX_CONFIG;
+    uart_config[UART3_INDEX].dma_tx = &uart3_dma_tx;
+#endif
+#endif
+
+#ifdef BSP_USING_UART4
+    uart_obj[UART4_INDEX].serial.config = config;
+    uart_obj[UART4_INDEX].uart_dma_flag = 0;
+
+    uart_obj[UART4_INDEX].serial.config.rx_bufsz = BSP_UART4_RX_BUFSIZE;
+    uart_obj[UART4_INDEX].serial.config.tx_bufsz = BSP_UART4_TX_BUFSIZE;
+
+#ifdef BSP_UART4_RX_USING_DMA
+    uart_obj[UART4_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart4_dma_rx = UART4_DMA_RX_CONFIG;
+    uart_config[UART4_INDEX].dma_rx = &uart4_dma_rx;
+#endif
+
+#ifdef BSP_UART4_TX_USING_DMA
+    uart_obj[UART4_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart4_dma_tx = UART4_DMA_TX_CONFIG;
+    uart_config[UART4_INDEX].dma_tx = &uart4_dma_tx;
+#endif
+#endif
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag)
+{
+    struct rt_serial_rx_fifo *rx_fifo;
+    DMA_HandleTypeDef *DMA_Handle;
+    struct dma_config *dma_config;
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if (RT_DEVICE_FLAG_DMA_RX == flag)
+    {
+        DMA_Handle = &uart->dma_rx.handle;
+        dma_config = uart->config->dma_rx;
+    }
+    else if (RT_DEVICE_FLAG_DMA_TX == flag)
+    {
+        DMA_Handle = &uart->dma_tx.handle;
+        dma_config = uart->config->dma_tx;
+    }
+    LOG_D("%s dma config start", uart->config->name);
+
+    {
+        rt_uint32_t tmpreg = 0x00U;
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32L0)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHBENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \
+    || defined(SOC_SERIES_STM32G4)|| defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32WB)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32MP1)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+#endif
+
+#if defined(DMAMUX1) && (defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB))
+        /* enable DMAMUX clock for L4+ and G4 */
+        __HAL_RCC_DMAMUX1_CLK_ENABLE();
+#elif defined(SOC_SERIES_STM32MP1)
+        __HAL_RCC_DMAMUX_CLK_ENABLE();
+#endif
+
+        UNUSED(tmpreg);   /* To avoid compiler warnings */
+    }
+
+    if (RT_DEVICE_FLAG_DMA_RX == flag)
+    {
+        __HAL_LINKDMA(&(uart->handle), hdmarx, uart->dma_rx.handle);
+    }
+    else if (RT_DEVICE_FLAG_DMA_TX == flag)
+    {
+        __HAL_LINKDMA(&(uart->handle), hdmatx, uart->dma_tx.handle);
+    }
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)
+    DMA_Handle->Instance                 = dma_config->Instance;
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Channel             = dma_config->channel;
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)\
+    || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Request             = dma_config->request;
+#endif
+    DMA_Handle->Init.PeriphInc           = DMA_PINC_DISABLE;
+    DMA_Handle->Init.MemInc              = DMA_MINC_ENABLE;
+    DMA_Handle->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    DMA_Handle->Init.MemDataAlignment    = DMA_MDATAALIGN_BYTE;
+
+    if (RT_DEVICE_FLAG_DMA_RX == flag)
+    {
+        DMA_Handle->Init.Direction           = DMA_PERIPH_TO_MEMORY;
+        DMA_Handle->Init.Mode                = DMA_CIRCULAR;
+    }
+    else if (RT_DEVICE_FLAG_DMA_TX == flag)
+    {
+        DMA_Handle->Init.Direction           = DMA_MEMORY_TO_PERIPH;
+        DMA_Handle->Init.Mode                = DMA_NORMAL;
+    }
+
+    DMA_Handle->Init.Priority            = DMA_PRIORITY_MEDIUM;
+#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Init.FIFOMode            = DMA_FIFOMODE_DISABLE;
+#endif
+    if (HAL_DMA_DeInit(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    if (HAL_DMA_Init(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    /* enable interrupt */
+    if (flag == RT_DEVICE_FLAG_DMA_RX)
+    {
+        rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+        /* Start DMA transfer */
+        if (HAL_UART_Receive_DMA(&(uart->handle), rx_fifo->buffer, serial->config.rx_bufsz) != HAL_OK)
+        {
+            /* Transfer error in reception process */
+            RT_ASSERT(0);
+        }
+        CLEAR_BIT(uart->handle.Instance->CR3, USART_CR3_EIE);
+        __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_IDLE);
+    }
+
+    /* DMA irq should set in DMA TX mode, or HAL_UART_TxCpltCallback function will not be called */
+    HAL_NVIC_SetPriority(dma_config->dma_irq, 0, 0);
+    HAL_NVIC_EnableIRQ(dma_config->dma_irq);
+
+    HAL_NVIC_SetPriority(uart->config->irq_type, 1, 0);
+    HAL_NVIC_EnableIRQ(uart->config->irq_type);
+
+    LOG_D("%s dma %s instance: %x", uart->config->name, flag == RT_DEVICE_FLAG_DMA_RX ? "RX" : "TX", DMA_Handle->Instance);
+    LOG_D("%s dma config done", uart->config->name);
+}
+
+/**
+  * @brief  UART error callbacks
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report transfer error, and you can
+  *         add your own implementation.
+  * @retval None
+  */
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+    RT_ASSERT(huart != NULL);
+    struct stm32_uart *uart = (struct stm32_uart *)huart;
+    LOG_D("%s: %s %d\n", __FUNCTION__, uart->config->name, huart->ErrorCode);
+    UNUSED(uart);
+}
+
+/**
+  * @brief  Rx Transfer completed callback
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report end of DMA Rx transfer, and
+  *         you can add your own implementation.
+  * @retval None
+  */
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(huart != NULL);
+    uart = (struct stm32_uart *)huart;
+
+    dma_recv_isr(&uart->serial, UART_RX_DMA_IT_TC_FLAG);
+    rt_hw_serial_isr(&uart->serial, RT_SERIAL_EVENT_RX_DMADONE);
+}
+
+/**
+  * @brief  Rx Half transfer completed callback
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report end of DMA Rx Half transfer,
+  *         and you can add your own implementation.
+  * @retval None
+  */
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    RT_ASSERT(huart != NULL);
+    uart = (struct stm32_uart *)huart;
+
+    dma_recv_isr(&uart->serial, UART_RX_DMA_IT_HT_FLAG);
+    rt_hw_serial_isr(&uart->serial, RT_SERIAL_EVENT_RX_DMADONE);
+}
+
+/**
+  * @brief  HAL_UART_TxCpltCallback
+  * @param  huart: UART handle
+  * @note   This callback can be called by two functions, first in UART_EndTransmit_IT when 
+  *         UART Tx complete and second in UART_DMATransmitCplt function in DMA Circular mode.
+  * @retval None
+  */
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    struct rt_serial_device *serial;
+    rt_size_t trans_total_index;
+    rt_base_t level;
+
+    RT_ASSERT(huart != NULL);
+    uart = (struct stm32_uart *)huart;
+    serial = &uart->serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    level = rt_hw_interrupt_disable();
+    trans_total_index = __HAL_DMA_GET_COUNTER(&(uart->dma_tx.handle));
+    rt_hw_interrupt_enable(level);
+
+    if (trans_total_index) return;
+
+    rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DMADONE);
+
+}
+#endif  /* RT_SERIAL_USING_DMA */
+
+static const struct rt_uart_ops stm32_uart_ops =
+{
+    .configure = stm32_configure,
+    .control = stm32_control,
+    .putc = stm32_putc,
+    .getc = stm32_getc,
+    .transmit = stm32_transmit
+};
+
+int rt_hw_usart_init(void)
+{
+    rt_err_t result = 0;
+    rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct stm32_uart);
+
+    stm32_uart_get_config();
+    for (int i = 0; i < obj_num; i++)
+    {
+        /* init UART object */
+        uart_obj[i].config = &uart_config[i];
+        uart_obj[i].serial.ops = &stm32_uart_ops;
+        /* register UART device */
+        result = rt_hw_serial_register(&uart_obj[i].serial,
+                                        uart_obj[i].config->name,
+                                        RT_DEVICE_FLAG_RDWR,
+                                        NULL);
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    return result;
+}
+
+#endif /* RT_USING_SERIAL_V2 */
diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.h b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.h
new file mode 100644
index 0000000000..3350b90864
--- /dev/null
+++ b/bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-06-01     KyleChan     first version
+ */
+
+#ifndef __DRV_USART_V2_H__
+#define __DRV_USART_V2_H__
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <rthw.h>
+#include <drv_common.h>
+#include <drv_dma.h>
+#include <drv_config.h>
+
+int rt_hw_usart_init(void);
+
+#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) \
+    || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32G4)
+#define UART_SET_TDR(__HANDLE__, __DATA__)  ((__HANDLE__)->Instance->TDR = (__DATA__))
+#define UART_GET_RDR(__HANDLE__)            ((__HANDLE__)->Instance->RDR & 0xFF)
+
+#else
+#define UART_SET_TDR(__HANDLE__, __DATA__)  ((__HANDLE__)->Instance->DR = (__DATA__))
+#define UART_GET_RDR(__HANDLE__)  (return (__HANDLE__)->Instance->DR & 0xFF))
+#endif
+
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F2) \
+    || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)
+#define UART_INSTANCE_CLEAR_FUNCTION    __HAL_UART_CLEAR_FLAG
+#elif defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32MP1)
+#define UART_INSTANCE_CLEAR_FUNCTION    __HAL_UART_CLEAR_IT
+#endif
+
+#define UART_RX_DMA_IT_IDLE_FLAG        0x00
+#define UART_RX_DMA_IT_HT_FLAG          0x01
+#define UART_RX_DMA_IT_TC_FLAG          0x02
+
+
+/* stm32 config class */
+struct stm32_uart_config
+{
+    const char *name;
+    USART_TypeDef *Instance;
+    IRQn_Type irq_type;
+
+#ifdef RT_SERIAL_USING_DMA
+    struct dma_config *dma_rx;
+    struct dma_config *dma_tx;
+#endif
+};
+
+/* stm32 uart dirver class */
+struct stm32_uart
+{
+    UART_HandleTypeDef handle;
+    struct stm32_uart_config *config;
+
+#ifdef RT_SERIAL_USING_DMA
+    struct
+    {
+        DMA_HandleTypeDef handle;
+        rt_size_t remaining_cnt;
+    } dma_rx;
+    struct
+    {
+        DMA_HandleTypeDef handle;
+    } dma_tx;
+#endif
+    rt_uint16_t uart_dma_flag;
+    struct rt_serial_device serial;
+};
+
+#endif  /* __DRV_USART_H__ */
diff --git a/bsp/stm32/stm32l475-atk-pandora/.config b/bsp/stm32/stm32l475-atk-pandora/.config
index 18377e1e4e..365e154c17 100644
--- a/bsp/stm32/stm32l475-atk-pandora/.config
+++ b/bsp/stm32/stm32l475-atk-pandora/.config
@@ -21,6 +21,12 @@ CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
 # CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -52,6 +58,7 @@ CONFIG_RT_USING_MEMPOOL=y
 # CONFIG_RT_USING_NOHEAP is not set
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_USERHEAP is not set
 # CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y
 
@@ -64,7 +71,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
-CONFIG_RT_VER_NUM=0x40002
+CONFIG_RT_VER_NUM=0x40004
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -115,14 +122,17 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
 # CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
 CONFIG_RT_USING_SERIAL=y
+# CONFIG_RT_USING_SERIAL_V1 is not set
+CONFIG_RT_USING_SERIAL_V2=y
 CONFIG_RT_SERIAL_USING_DMA=y
-CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
 # CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
@@ -135,7 +145,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_SENSOR is not set
 # CONFIG_RT_USING_TOUCH is not set
 # CONFIG_RT_USING_HWCRYPTO is not set
-# CONFIG_RT_USING_ENCODER is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
 # CONFIG_RT_USING_INPUT_CAPTURE is not set
 # CONFIG_RT_USING_WIFI is not set
 
@@ -150,7 +160,7 @@ CONFIG_RT_USING_PIN=y
 #
 # CONFIG_RT_USING_LIBC is not set
 # CONFIG_RT_USING_PTHREADS is not set
-CONFIG_RT_LIBC_USING_TIME=y
+# CONFIG_RT_LIBC_USING_TIME is not set
 
 #
 # Network
@@ -187,19 +197,44 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
+CONFIG_RT_USING_RT_LINK=y
+CONFIG_RT_LINK_USING_SF_CRC=y
+# CONFIG_RT_LINK_USING_HW_CRC is not set
+
+#
+# rt-link hardware device configuration
+#
+CONFIG_RT_LINK_HW_DEVICE_NAME="uart2"
+CONFIG_RT_LINK_USING_UART=y
+
+#
+# rt link debug option
+#
+# CONFIG_USING_RT_LINK_DEBUG is not set
+# CONFIG_USING_RT_LINK_HW_DEBUG is not set
 # CONFIG_RT_USING_LWP is not set
 
 #
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
+#
 # RT-Thread online packages
 #
 
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_UMQTT is not set
 # CONFIG_PKG_USING_WEBCLIENT is not set
 # CONFIG_PKG_USING_WEBNET is not set
 # CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
 # CONFIG_PKG_USING_JSMN is not set
@@ -226,6 +261,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
 # CONFIG_PKG_USING_ATSRV_SOCKET is not set
 # CONFIG_PKG_USING_WIZNET is not set
@@ -237,7 +274,10 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_GAGENT_CLOUD is not set
 # CONFIG_PKG_USING_ALI_IOTKIT is not set
 # CONFIG_PKG_USING_AZURE is not set
-# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
 # CONFIG_PKG_USING_IPMSG is not set
@@ -246,8 +286,23 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_LIBRWS is not set
 # CONFIG_PKG_USING_TCPSERVER is not set
 # CONFIG_PKG_USING_PROTOBUF_C is not set
-# CONFIG_PKG_USING_ONNX_PARSER is not set
-# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+# CONFIG_PKG_USING_NMEALIB is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_BSAL is not set
 
 #
 # security packages
@@ -255,6 +310,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_libsodium is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+# CONFIG_PKG_USING_YD_CRYPTO is not set
 
 #
 # language packages
@@ -270,6 +327,10 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_MUPDF is not set
 # CONFIG_PKG_USING_STEMWIN is not set
 # CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
 
 #
 # tools packages
@@ -281,7 +342,31 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
 # CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_GPS_RMC is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+# CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
 
 #
 # system packages
@@ -293,14 +378,43 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_CMSIS is not set
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
 # CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+# CONFIG_PKG_USING_RAMDISK is not set
+# CONFIG_PKG_USING_MININI is not set
+# CONFIG_PKG_USING_QBOOT is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+# CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
 
 #
 # peripheral libraries and drivers
@@ -308,6 +422,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
@@ -316,10 +432,16 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_SX12XX is not set
 # CONFIG_PKG_USING_SIGNAL_LED is not set
 # CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
 # CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
 # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
 # CONFIG_PKG_USING_AD7746 is not set
@@ -327,7 +449,47 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_I2C_TOOLS is not set
 # CONFIG_PKG_USING_NRF24L01 is not set
 # CONFIG_PKG_USING_TOUCH_DRIVERS is not set
-# CONFIG_PKG_USING_LCD_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_WS2812B is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
+# CONFIG_PKG_USING_QLED is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_AGILE_CONSOLE is not set
+# CONFIG_PKG_USING_LD3320 is not set
+# CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
 
 #
 # miscellaneous packages
@@ -337,6 +499,7 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
 # CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
@@ -345,6 +508,8 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
 # CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
 
 #
 # samples: kernel and components samples
@@ -355,9 +520,69 @@ CONFIG_RT_LIBC_USING_TIME=y
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
-# CONFIG_PKG_USING_NNOM is not set
-# CONFIG_PKG_USING_LIBANN is not set
-# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_KI is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# games: games run on RT-Thread console
+#
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_COWSAY is not set
+
+#
+# Privated Packages of RealThread
+#
+# CONFIG_PKG_USING_CODEC is not set
+# CONFIG_PKG_USING_PLAYER is not set
+# CONFIG_PKG_USING_MPLAYER is not set
+# CONFIG_PKG_USING_PERSIMMON_SRC is not set
+# CONFIG_PKG_USING_JS_PERSIMMON is not set
+# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
+
+#
+# Network Utilities
+#
+# CONFIG_PKG_USING_WICED is not set
+# CONFIG_PKG_USING_CLOUDSDK is not set
+# CONFIG_PKG_USING_POWER_MANAGER is not set
+# CONFIG_PKG_USING_RT_OTA is not set
+# CONFIG_PKG_USING_RTINSIGHT is not set
+# CONFIG_PKG_USING_SMARTCONFIG is not set
+# CONFIG_PKG_USING_RTX is not set
+# CONFIG_RT_USING_TESTCASE is not set
+# CONFIG_PKG_USING_NGHTTP2 is not set
+# CONFIG_PKG_USING_AVS is not set
+# CONFIG_PKG_USING_ALI_LINKKIT is not set
+# CONFIG_PKG_USING_STS is not set
+# CONFIG_PKG_USING_DLMS is not set
+# CONFIG_PKG_USING_AUDIO_FRAMEWORK is not set
+# CONFIG_PKG_USING_ZBAR is not set
+# CONFIG_PKG_USING_MCF is not set
+# CONFIG_PKG_USING_URPC is not set
+# CONFIG_PKG_USING_DCM is not set
+# CONFIG_PKG_USING_EMQ is not set
+# CONFIG_PKG_USING_CFGM is not set
+# CONFIG_PKG_USING_RT_CMSIS_DAP is not set
+# CONFIG_PKG_USING_SMODULE is not set
+# CONFIG_PKG_USING_SNFD is not set
+# CONFIG_PKG_USING_UDBD is not set
+# CONFIG_PKG_USING_BENCHMARK is not set
+# CONFIG_PKG_USING_UBJSON is not set
+# CONFIG_PKG_USING_DATATYPE is not set
+# CONFIG_PKG_USING_FASTFS is not set
+# CONFIG_PKG_USING_RIL is not set
+# CONFIG_PKG_USING_WATCH_DCM_SVC is not set
+# CONFIG_PKG_USING_GUI_TEST is not set
+# CONFIG_PKG_USING_PMEM is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32L4=y
 
@@ -370,12 +595,15 @@ CONFIG_SOC_STM32L475VE=y
 # Onboard Peripheral Drivers
 #
 CONFIG_BSP_USING_STLINK_TO_USART=y
+# CONFIG_BSP_USING_KEY is not set
 # CONFIG_BSP_USING_QSPI_FLASH is not set
 # CONFIG_BSP_USING_SPI_LCD is not set
 # CONFIG_BSP_USING_SDCARD is not set
 # CONFIG_BSP_USING_ICM20608 is not set
 # CONFIG_BSP_USING_AHT10 is not set
 # CONFIG_BSP_USING_AUDIO is not set
+# CONFIG_BSP_USING_USB_AUDIO is not set
+# CONFIG_BSP_USING_WIFI is not set
 
 #
 # On-chip Peripheral Drivers
@@ -384,7 +612,14 @@ CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_UART1_RX_USING_DMA is not set
-# CONFIG_BSP_USING_UART2 is not set
+# CONFIG_BSP_UART1_TX_USING_DMA is not set
+CONFIG_BSP_UART1_RX_BUFSIZE=256
+CONFIG_BSP_UART1_TX_BUFSIZE=0
+CONFIG_BSP_USING_UART2=y
+CONFIG_BSP_UART2_RX_USING_DMA=y
+CONFIG_BSP_UART2_TX_USING_DMA=y
+CONFIG_BSP_UART2_RX_BUFSIZE=256
+CONFIG_BSP_UART2_TX_BUFSIZE=256
 # CONFIG_BSP_USING_ON_CHIP_FLASH is not set
 # CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_QSPI is not set
@@ -393,9 +628,11 @@ CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_USING_TIM is not set
 # CONFIG_BSP_USING_PWM is not set
 # CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_DAC is not set
 # CONFIG_BSP_USING_ONCHIP_RTC is not set
 # CONFIG_BSP_USING_WDT is not set
-# CONFIG_BSP_USING_USBD_FS is not set
+# CONFIG_BSP_USING_USBD is not set
+# CONFIG_BSP_USING_STM32_SDIO is not set
 # CONFIG_BSP_USING_CRC is not set
 # CONFIG_BSP_USING_RNG is not set
 # CONFIG_BSP_USING_UDID is not set
diff --git a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig
index bc71249fa0..e8a0713647 100644
--- a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig
+++ b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig
@@ -152,23 +152,59 @@ menu "On-chip Peripheral Drivers"
         default y
         select RT_USING_SERIAL
         if BSP_USING_UART
-            config BSP_USING_UART1
-                bool "Enable UART1"
+            menuconfig BSP_USING_UART1
+                bool "Enable UART1 (Debugger)"
                 default y
+                if BSP_USING_UART1
+                    config BSP_UART1_RX_USING_DMA
+                        bool "Enable UART1 RX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
 
-            config BSP_UART1_RX_USING_DMA
-                bool "Enable UART1 RX DMA"
-                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
-                default n
+                    config BSP_UART1_TX_USING_DMA
+                        bool "Enable UART1 TX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_RX_BUFSIZE
+                        int "Set UART1 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART1_TX_BUFSIZE
+                        int "Set UART1 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_USING_UART2
+            menuconfig BSP_USING_UART2
                 bool "Enable UART2"
                 default n
+                if BSP_USING_UART2
+                    config BSP_UART2_RX_USING_DMA
+                        bool "Enable UART2 RX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
 
-            config BSP_UART2_RX_USING_DMA
-                bool "Enable UART2 RX DMA"
-                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
-                default n
+                    config BSP_UART2_TX_USING_DMA
+                        bool "Enable UART2 TX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_RX_BUFSIZE
+                        int "Set UART2 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART2_TX_BUFSIZE
+                        int "Set UART2 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+                endif
         endif
 
     config BSP_USING_ON_CHIP_FLASH
diff --git a/bsp/stm32/stm32l475-atk-pandora/rtconfig.h b/bsp/stm32/stm32l475-atk-pandora/rtconfig.h
index e18e51ae82..178f69b3ec 100644
--- a/bsp/stm32/stm32l475-atk-pandora/rtconfig.h
+++ b/bsp/stm32/stm32l475-atk-pandora/rtconfig.h
@@ -16,6 +16,9 @@
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 256
+
+/* kservice optimization */
+
 #define RT_DEBUG
 #define RT_DEBUG_COLOR
 
@@ -39,7 +42,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 256
 #define RT_CONSOLE_DEVICE_NAME "uart1"
-#define RT_VER_NUM 0x40002
+#define RT_VER_NUM 0x40004
 #define ARCH_ARM
 #define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
@@ -79,8 +82,8 @@
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
 #define RT_USING_SERIAL
+#define RT_USING_SERIAL_V2
 #define RT_SERIAL_USING_DMA
-#define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
 
 /* Using USB */
@@ -88,7 +91,6 @@
 
 /* POSIX layer and C standard library */
 
-#define RT_LIBC_USING_TIME
 
 /* Network */
 
@@ -109,6 +111,19 @@
 
 /* Utilities */
 
+#define RT_USING_RT_LINK
+#define RT_LINK_USING_SF_CRC
+
+/* rt-link hardware device configuration */
+
+#define RT_LINK_HW_DEVICE_NAME "uart2"
+#define RT_LINK_USING_UART
+
+/* rt link debug option */
+
+
+/* RT-Thread Utestcases */
+
 
 /* RT-Thread online packages */
 
@@ -141,14 +156,29 @@
 /* system packages */
 
 
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
 /* peripheral libraries and drivers */
 
 
+/* AI packages */
+
+
 /* miscellaneous packages */
 
 
 /* samples: kernel and components samples */
 
+
+/* games: games run on RT-Thread console */
+
+
+/* Privated Packages of RealThread */
+
+
+/* Network Utilities */
+
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32L4
 
@@ -165,6 +195,13 @@
 #define BSP_USING_GPIO
 #define BSP_USING_UART
 #define BSP_USING_UART1
+#define BSP_UART1_RX_BUFSIZE 256
+#define BSP_UART1_TX_BUFSIZE 0
+#define BSP_USING_UART2
+#define BSP_UART2_RX_USING_DMA
+#define BSP_UART2_TX_USING_DMA
+#define BSP_UART2_RX_BUFSIZE 256
+#define BSP_UART2_TX_BUFSIZE 256
 
 /* Board extended module Drivers */