[components] [drivers ] [Kconfig] 整理 components/drivers 的 Kconfig (#9054)

整理 components/drivers 的 Kconfig

1 files changed, 30 insertions, 937 deletions

diff --git a/components/drivers/Kconfig b/components/drivers/Kconfig
index cfb0172853..b7112d9ea6 100755
--- a/components/drivers/Kconfig
+++ b/components/drivers/Kconfig
@@ -1,942 +1,35 @@
 menu "Device Drivers"
 
-config RT_USING_DM
-    bool "Enable device driver model with device tree"
-    default n
-    help
-        Enable device driver model with device tree (FDT). It will use more memory
-        to parse and support device tree feature.
+rsource "core/Kconfig"
+rsource "ipc/Kconfig"
 
-source "$RTT_DIR/components/drivers/ipc/Kconfig"
-
-menuconfig RT_USING_SERIAL
-    bool "USING Serial device drivers"
-    select RT_USING_DEVICE_IPC
-    select RT_USING_DEVICE
-    default y
-
-    if RT_USING_SERIAL
-        choice
-            prompt "Choice Serial version"
-            default RT_USING_SERIAL_V1
-            config RT_USING_SERIAL_V1
-                bool "RT_USING_SERIAL_V1"
-            config RT_USING_SERIAL_V2
-                bool "RT_USING_SERIAL_V2"
-        endchoice
-        config RT_SERIAL_USING_DMA
-            bool "Enable serial DMA mode"
-            default y
-
-        config RT_SERIAL_RB_BUFSZ
-            int "Set RX buffer size"
-            depends on !RT_USING_SERIAL_V2
-            default 64
-    endif
-
-config RT_USING_CAN
-    bool "Using CAN device drivers"
-    default n
-
-if RT_USING_CAN
-    config RT_CAN_USING_HDR
-        bool "Enable CAN hardware filter"
-        default n
-    config RT_CAN_USING_CANFD
-        bool "Enable CANFD support"
-        default n
-endif
-
-config RT_USING_CPUTIME
-    bool "Enable CPU time for high resolution clock counter"
-    default n
-    help
-        When enable this option, the BSP should provide a rt_clock_cputime_ops
-        for CPU time by:
-        const static struct rt_clock_cputime_ops _ops = {...};
-        clock_cpu_setops(&_ops);
-
-        Then user can use high resolution clock counter with:
-
-        ts1 = clock_cpu_gettime();
-        ts2 = clock_cpu_gettime();
-
-        /* and get the ms of delta tick with API: */
-        ms_tick = clock_cpu_millisecond(t2 - t1);
-        us_tick = clock_cpu_microsecond(t2 - t1);
-
-if RT_USING_CPUTIME
-    config RT_USING_CPUTIME_CORTEXM
-        bool "Support Cortex-M CPU"
-        default y
-        depends on ARCH_ARM_CORTEX_M0 || ARCH_ARM_CORTEX_M3 || ARCH_ARM_CORTEX_M4 || ARCH_ARM_CORTEX_M7
-        select PKG_USING_PERF_COUNTER
-    config RT_USING_CPUTIME_RISCV
-        bool "Use rdtime instructions for CPU time"
-        default y
-        depends on ARCH_RISCV64
-        help
-            Some RISCV64 MCU Use rdtime instructions read CPU time.
-    config CPUTIME_TIMER_FREQ
-        int "CPUTIME timer freq"
-        default 0
-endif
-
-config RT_USING_I2C
-    bool "Using I2C device drivers"
-    default n
-
-if RT_USING_I2C
-    config RT_I2C_DEBUG
-        bool "Use I2C debug message"
-        default n
-
-    config RT_USING_I2C_BITOPS
-        bool "Use GPIO to simulate I2C"
-        default y
-
-    if RT_USING_I2C_BITOPS
-        config RT_I2C_BITOPS_DEBUG
-            bool "Use simulate I2C debug message"
-            default n
-    endif
-
-    config RT_USING_SOFT_I2C
-        bool "Use GPIO to soft simulate I2C"
-        default n
-        select RT_USING_PIN
-        select RT_USING_I2C_BITOPS
-    if RT_USING_SOFT_I2C
-        config RT_USING_SOFT_I2C1
-            bool "Enable I2C1 Bus (software simulation)"
-            default y
-            if RT_USING_SOFT_I2C1
-                config RT_SOFT_I2C1_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 1
-                config RT_SOFT_I2C1_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 2
-                config RT_SOFT_I2C1_BUS_NAME
-                    string "Bus name"
-                    default "i2c1"
-                config RT_SOFT_I2C1_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C1_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C2
-            bool "Enable I2C2 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C2
-                config RT_SOFT_I2C2_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 3
-                config RT_SOFT_I2C2_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 4
-                config RT_SOFT_I2C2_BUS_NAME
-                    string "Bus name"
-                    default "i2c2"
-                config RT_SOFT_I2C2_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C2_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C3
-            bool "Enable I2C3 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C3
-                config RT_SOFT_I2C3_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 5
-                config RT_SOFT_I2C3_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 6
-                config RT_SOFT_I2C3_BUS_NAME
-                    string "Bus name"
-                    default "i2c3"
-                config RT_SOFT_I2C3_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C3_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C4
-            bool "Enable I2C4 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C4
-                config RT_SOFT_I2C4_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 7
-                config RT_SOFT_I2C4_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 8
-                config RT_SOFT_I2C4_BUS_NAME
-                    string "Bus name"
-                    default "i2c4"
-                config RT_SOFT_I2C4_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C4_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C5
-            bool "Enable I2C5 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C5
-                config RT_SOFT_I2C5_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 9
-                config RT_SOFT_I2C5_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C5_BUS_NAME
-                    string "Bus name"
-                    default "i2c5"
-                config RT_SOFT_I2C5_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C5_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C6
-            bool "Enable I2C6 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C6
-                config RT_SOFT_I2C6_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 11
-                config RT_SOFT_I2C6_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 12
-                config RT_SOFT_I2C6_BUS_NAME
-                    string "Bus name"
-                    default "i2c6"
-                config RT_SOFT_I2C6_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C6_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C7
-            bool "Enable I2C7 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C7
-                config RT_SOFT_I2C7_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 13
-                config RT_SOFT_I2C7_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 14
-                config RT_SOFT_I2C7_BUS_NAME
-                    string "Bus name"
-                    default "i2c7"
-                config RT_SOFT_I2C7_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C7_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-        config RT_USING_SOFT_I2C8
-            bool "Enable I2C8 Bus (software simulation)"
-            default n
-            if RT_USING_SOFT_I2C8
-                config RT_SOFT_I2C8_SCL_PIN
-                    int "SCL pin number"
-                    range 0 32767
-                    default 15
-                config RT_SOFT_I2C8_SDA_PIN
-                    int "SDA pin number"
-                    range 0 32767
-                    default 16
-                config RT_SOFT_I2C8_BUS_NAME
-                    string "Bus name"
-                    default "i2c8"
-                config RT_SOFT_I2C8_TIMING_DELAY
-                    int "Timing delay (us)"
-                    range 0 32767
-                    default 10
-                config RT_SOFT_I2C8_TIMING_TIMEOUT
-                    int "Timing timeout (tick)"
-                    range 0 32767
-                    default 10
-            endif
-    endif
-endif
-
-config RT_USING_PHY
-    bool "Using ethernet phy device drivers"
-    default n
-
-config RT_USING_ADC
-    bool "Using ADC device drivers"
-    default n
-
-config RT_USING_DAC
-    bool "Using DAC device drivers"
-    default n
-
-config RT_USING_NULL
-    bool "Using NULL device drivers"
-    default n
-
-config RT_USING_ZERO
-    bool "Using ZERO device drivers"
-    default n
-
-config RT_USING_RANDOM
-    bool "Using RANDOM device drivers"
-    default n
-
-config RT_USING_PWM
-    bool "Using PWM device drivers"
-    default n
-
-config RT_USING_MTD_NOR
-    bool "Using MTD Nor Flash device drivers"
-    default n
-
-config RT_USING_MTD_NAND
-    bool "Using MTD Nand Flash device drivers"
-    default n
-
-    if RT_USING_MTD_NAND
-    config RT_MTD_NAND_DEBUG
-        bool "Enable MTD Nand operations debug information"
-        default n
-    endif
-
-config RT_USING_PM
-    bool "Using Power Management device drivers"
-    default n
-
-    if RT_USING_PM
-        config PM_TICKLESS_THRESHOLD_TIME
-            int "PM tickless threashold time"
-            default 2
-
-        config PM_USING_CUSTOM_CONFIG
-            bool "PM using custom pm config"
-            default n
-
-        config PM_ENABLE_DEBUG
-            bool "PM Enable Debug"
-            default n
-
-        config PM_ENABLE_SUSPEND_SLEEP_MODE
-            bool "PM Device suspend change sleep mode"
-            default n
-
-        config PM_ENABLE_THRESHOLD_SLEEP_MODE
-            bool "PM using threshold time change sleep mode"
-            default n
-
-        if PM_ENABLE_THRESHOLD_SLEEP_MODE
-            config PM_LIGHT_THRESHOLD_TIME
-                int "PM light mode threashold time"
-                default 5
-
-            config PM_DEEP_THRESHOLD_TIME
-                int "PM deep mode threashold time"
-                default 20
-
-            config PM_STANDBY_THRESHOLD_TIME
-                int "PM standby mode threashold time"
-                default 100
-        endif
-    endif
-
-config RT_USING_RTC
-    bool "Using RTC device drivers"
-    default n
-
-    if RT_USING_RTC
-        config RT_USING_ALARM
-            bool "Using RTC alarm"
-            default n
-
-        config RT_USING_SOFT_RTC
-            bool "Using software simulation RTC device"
-            default n
-    endif
-
-config RT_USING_SDIO
-    bool "Using SD/MMC device drivers"
-    default n
-
-    if RT_USING_SDIO
-        config RT_SDIO_STACK_SIZE
-            int "The stack size for sdio irq thread"
-            default 512
-
-        config RT_SDIO_THREAD_PRIORITY
-            int "The priority level value of sdio irq thread"
-            default 15
-
-        config RT_MMCSD_STACK_SIZE
-            int "The stack size for mmcsd thread"
-            default 1024
-
-        config RT_MMCSD_THREAD_PREORITY
-            int "The priority level value of mmcsd thread"
-            default 22
-
-        config RT_MMCSD_MAX_PARTITION
-            int "mmcsd max partition"
-            default 16
-        config RT_SDIO_DEBUG
-            bool "Enable SDIO debug log output"
-        default n
-    endif
-
-config RT_USING_SPI
-    bool "Using SPI Bus/Device device drivers"
-    default n
-
-    if RT_USING_SPI
-        config RT_USING_SPI_BITOPS
-            select RT_USING_PIN
-            bool "Use GPIO to simulate SPI"
-            default n
-
-        if RT_USING_SPI_BITOPS
-            config RT_SPI_BITOPS_DEBUG
-                bool "Use simulate SPI debug message"
-                default n
-        endif
-
-        config RT_USING_QSPI
-            bool "Enable QSPI mode"
-            default n
-
-        config RT_USING_SPI_MSD
-            bool "Using SD/TF card driver with spi"
-            select RT_USING_DFS
-            default n
-
-        config RT_USING_SFUD
-            bool "Using Serial Flash Universal Driver"
-            default n
-            help
-                An using JEDEC's SFDP standard serial (SPI) flash universal driver library
-
-            if RT_USING_SFUD
-                config RT_SFUD_USING_SFDP
-                bool "Using auto probe flash JEDEC SFDP parameter"
-                default y
-
-                config RT_SFUD_USING_FLASH_INFO_TABLE
-                bool "Using defined supported flash chip information table"
-                default y
-
-                config RT_SFUD_USING_QSPI
-                bool "Using QSPI mode support"
-                select RT_USING_QSPI
-                default n
-
-                config RT_SFUD_SPI_MAX_HZ
-                int "Default spi maximum speed(HZ)"
-                range 0 50000000
-                default 50000000
-                help
-                    Read the JEDEC SFDP command must run at 50 MHz or less,and you also can use rt_spi_configure(); to config spi speed.
-
-                config RT_DEBUG_SFUD
-                bool "Show more SFUD debug information"
-                default n
-            endif
-
-        config RT_USING_ENC28J60
-            bool "Using ENC28J60 SPI Ethernet network interface"
-            select RT_USING_LWIP
-            default n
-
-        config RT_USING_SPI_WIFI
-            bool "Using RW009/007 SPI Wi-Fi wireless interface"
-            select RT_USING_LWIP
-            default n
-    endif
-
-config RT_USING_WDT
-    bool "Using Watch Dog device drivers"
-    default n
-
-config RT_USING_AUDIO
-    bool "Using Audio device drivers"
-    default n
-
-    if RT_USING_AUDIO
-        config RT_AUDIO_REPLAY_MP_BLOCK_SIZE
-            int "Replay memory pool block size"
-            default 4096
-
-        config RT_AUDIO_REPLAY_MP_BLOCK_COUNT
-            int "Replay memory pool block count"
-            default 2
-
-        config RT_AUDIO_RECORD_PIPE_SIZE
-            int "Record pipe size"
-            default 2048
-    endif
-
-config RT_USING_SENSOR
-    bool "Using Sensor device drivers"
-    select RT_USING_PIN
-    default n
-
-if RT_USING_SENSOR
-    config RT_USING_SENSOR_V2
-        bool "Enable Sensor Framework v2"
-        default n
-
-    config RT_USING_SENSOR_CMD
-        bool "Using Sensor cmd"
-        select PKG_USING_RT_VSNPRINTF_FULL if RT_USING_SENSOR_V2
-        default y
-endif
-
-config RT_USING_TOUCH
-    bool "Using Touch device drivers"
-    default n
-    if RT_USING_TOUCH
-        config RT_TOUCH_PIN_IRQ
-        bool "touch irq use pin irq"
-        default n
-    endif
-
-config RT_USING_LCD
-    bool "Using LCD graphic drivers"
-    default n
-
-menuconfig RT_USING_HWCRYPTO
-        bool "Using Hardware Crypto drivers"
-        default n
-
-    if RT_USING_HWCRYPTO
-        config RT_HWCRYPTO_DEFAULT_NAME
-            string "Hardware crypto device name"
-            default "hwcryto"
-
-        config RT_HWCRYPTO_IV_MAX_SIZE
-            int "IV max size"
-            default "16"
-
-        config RT_HWCRYPTO_KEYBIT_MAX_SIZE
-            int "Key max bit length"
-            default 256
-
-        config RT_HWCRYPTO_USING_GCM
-            bool "Using Hardware GCM"
-            default n
-
-        config RT_HWCRYPTO_USING_AES
-            bool "Using Hardware AES"
-            default n
-
-        if RT_HWCRYPTO_USING_AES
-            config RT_HWCRYPTO_USING_AES_ECB
-                bool "Using Hardware AES ECB mode"
-                default y
-
-            config RT_HWCRYPTO_USING_AES_CBC
-                bool "Using Hardware AES CBC mode"
-                default n
-
-            config RT_HWCRYPTO_USING_AES_CFB
-                bool "Using Hardware AES CFB mode"
-                default n
-
-            config RT_HWCRYPTO_USING_AES_CTR
-                bool "Using Hardware AES CTR mode"
-                default n
-
-            config RT_HWCRYPTO_USING_AES_OFB
-                bool "Using Hardware AES OFB mode"
-                default n
-        endif
-
-        config RT_HWCRYPTO_USING_DES
-            bool "Using Hardware DES"
-            default n
-
-        if RT_HWCRYPTO_USING_DES
-            config RT_HWCRYPTO_USING_DES_ECB
-                bool "Using Hardware DES ECB mode"
-                default y
-
-            config RT_HWCRYPTO_USING_DES_CBC
-                bool "Using Hardware DES CBC mode"
-                default n
-        endif
-
-        config RT_HWCRYPTO_USING_3DES
-            bool "Using Hardware 3DES"
-            default n
-
-        if RT_HWCRYPTO_USING_3DES
-            config RT_HWCRYPTO_USING_3DES_ECB
-                bool "Using Hardware 3DES ECB mode"
-                default y
-
-            config RT_HWCRYPTO_USING_3DES_CBC
-                bool "Using Hardware 3DES CBC mode"
-                default n
-        endif
-
-        config RT_HWCRYPTO_USING_RC4
-            bool "Using Hardware RC4"
-            default n
-
-        config RT_HWCRYPTO_USING_MD5
-            bool "Using Hardware MD5"
-            default n
-
-        config RT_HWCRYPTO_USING_SHA1
-            bool "Using Hardware SHA1"
-            default n
-
-        config RT_HWCRYPTO_USING_SHA2
-            bool "Using Hardware SHA2"
-            default n
-
-        if RT_HWCRYPTO_USING_SHA2
-            config RT_HWCRYPTO_USING_SHA2_224
-                bool "Using Hardware SHA2_224 mode"
-                default n
-
-            config RT_HWCRYPTO_USING_SHA2_256
-                bool "Using Hardware SHA2_256 mode"
-                default y
-
-            config RT_HWCRYPTO_USING_SHA2_384
-                bool "Using Hardware SHA2_384 mode"
-                default n
-
-            config RT_HWCRYPTO_USING_SHA2_512
-                bool "Using Hardware SHA2_512 mode"
-                default n
-        endif
-
-        config RT_HWCRYPTO_USING_RNG
-            bool "Using Hardware RNG"
-            default n
-
-        config RT_HWCRYPTO_USING_CRC
-            bool "Using Hardware CRC"
-            default n
-
-        if RT_HWCRYPTO_USING_CRC
-            config RT_HWCRYPTO_USING_CRC_07
-                bool "Using Hardware CRC-8 0x07 polynomial"
-                default n
-
-            config RT_HWCRYPTO_USING_CRC_8005
-                bool "Using Hardware CRC-16 0x8005 polynomial"
-                default n
-
-            config RT_HWCRYPTO_USING_CRC_1021
-                bool "Using Hardware CRC-16 0x1021 polynomial"
-                default n
-
-            config RT_HWCRYPTO_USING_CRC_3D65
-                bool "Using Hardware CRC-16 0x3D65 polynomial"
-                default n
-
-            config RT_HWCRYPTO_USING_CRC_04C11DB7
-                bool "Using Hardware CRC-32 0x04C11DB7 polynomial"
-                default n
-        endif
-
-        config RT_HWCRYPTO_USING_BIGNUM
-            bool "Using Hardware bignum"
-            default n
-
-        if RT_HWCRYPTO_USING_BIGNUM
-            config RT_HWCRYPTO_USING_BIGNUM_EXPTMOD
-                bool "Using Hardware bignum expt_mod operation"
-                default y
-
-            config RT_HWCRYPTO_USING_BIGNUM_MULMOD
-                bool "Using Hardware bignum mul_mod operation"
-                default y
-
-            config RT_HWCRYPTO_USING_BIGNUM_MUL
-                bool "Using Hardware bignum mul operation"
-                default n
-
-            config RT_HWCRYPTO_USING_BIGNUM_ADD
-                bool "Using Hardware bignum add operation"
-                default n
-
-            config RT_HWCRYPTO_USING_BIGNUM_SUB
-                bool "Using Hardware bignum sub operation"
-                default n
-        endif
-    endif
-
-config RT_USING_PULSE_ENCODER
-    bool "Using PULSE ENCODER device drivers"
-    default n
-
-config RT_USING_INPUT_CAPTURE
-    bool "Using INPUT CAPTURE device drivers"
-    default n
-
-if RT_USING_INPUT_CAPTURE
-    config RT_INPUT_CAPTURE_RB_SIZE
-        int "Set input capture ringbuffer size"
-        default 100
-endif
-
-config RT_USING_DEV_BUS
-    bool "Using Device Bus device drivers"
-    default y if RT_USING_SMART
-    default n
-
-menuconfig RT_USING_WIFI
-    bool "Using Wi-Fi framework"
-    default n
-
-    if RT_USING_WIFI
-        config RT_WLAN_DEVICE_STA_NAME
-            string "The device name for station"
-            default "wlan0"
-
-        config RT_WLAN_DEVICE_AP_NAME
-            string "The device name for ap"
-            default "wlan1"
-
-        config RT_WLAN_SSID_MAX_LENGTH
-            int "SSID maximum length"
-            default 32
-
-        config RT_WLAN_PASSWORD_MAX_LENGTH
-            int "Password maximum length"
-            default 32
-
-        config RT_WLAN_DEV_EVENT_NUM
-            int "Driver events maxcount"
-            default 2
-
-        config RT_WLAN_MANAGE_ENABLE
-            bool "Connection management Enable"
-            default y
-
-        if RT_WLAN_MANAGE_ENABLE
-            config RT_WLAN_SCAN_WAIT_MS
-                int "Set scan timeout time(ms)"
-                default 10000
-
-            config RT_WLAN_CONNECT_WAIT_MS
-                int "Set connect timeout time(ms)"
-                default 10000
-
-            config RT_WLAN_SCAN_SORT
-                bool "Automatic sorting of scan results"
-                default y
-
-            config RT_WLAN_MSH_CMD_ENABLE
-                bool "MSH command Enable"
-                default y
-
-            config RT_WLAN_JOIN_SCAN_BY_MGNT
-                bool "Enable wlan join scan"
-                default y
-
-            config RT_WLAN_AUTO_CONNECT_ENABLE
-                bool "Auto connect Enable"
-                select RT_WLAN_CFG_ENABLE
-                select RT_WLAN_WORK_THREAD_ENABLE
-                default y
-
-            if RT_WLAN_AUTO_CONNECT_ENABLE
-                config AUTO_CONNECTION_PERIOD_MS
-                    int "Auto connect period(ms)"
-                    default 2000
-            endif
-        endif
-
-        config RT_WLAN_CFG_ENABLE
-            bool "WiFi information automatically saved Enable"
-            default y
-
-        if RT_WLAN_CFG_ENABLE
-            config RT_WLAN_CFG_INFO_MAX
-                int "Maximum number of WiFi information automatically saved"
-                default 3
-        endif
-
-        config RT_WLAN_PROT_ENABLE
-            bool "Transport protocol manage Enable"
-            default y
-
-        if RT_WLAN_PROT_ENABLE
-            config RT_WLAN_PROT_NAME_LEN
-                int "Transport protocol name length"
-                default 8
-
-            config RT_WLAN_PROT_MAX
-                int "Transport protocol maxcount"
-                default 2
-
-            config RT_WLAN_DEFAULT_PROT
-                string "Default transport protocol"
-                default "lwip"
-
-            config RT_WLAN_PROT_LWIP_ENABLE
-                bool "LWIP transport protocol Enable"
-                select RT_USING_LWIP
-                default y
-
-            if RT_WLAN_PROT_LWIP_ENABLE
-                config RT_WLAN_PROT_LWIP_NAME
-                    string "LWIP transport protocol name"
-                    default "lwip"
-
-                config RT_WLAN_PROT_LWIP_PBUF_FORCE
-                    bool "Forced use of PBUF transmission"
-                    default n
-            endif
-        endif
-
-        config RT_WLAN_WORK_THREAD_ENABLE
-            bool "WLAN work queue thread Enable"
-            default y
-
-        if RT_WLAN_WORK_THREAD_ENABLE
-            config RT_WLAN_WORKQUEUE_THREAD_NAME
-                string "WLAN work queue thread name"
-                default "wlan"
-
-            config RT_WLAN_WORKQUEUE_THREAD_SIZE
-                int "WLAN work queue thread size"
-                default 2048
-
-            config RT_WLAN_WORKQUEUE_THREAD_PRIO
-                int "WLAN work queue thread priority"
-                default 15
-        endif
-
-        menuconfig RT_WLAN_DEBUG
-            bool "Enable WLAN Debugging Options"
-            default n
-
-        if RT_WLAN_DEBUG
-            config RT_WLAN_CMD_DEBUG
-                bool "Enable Debugging of wlan_cmd.c"
-                default n
-
-            config RT_WLAN_MGNT_DEBUG
-                bool "Enable Debugging of wlan_mgnt.c"
-                default n
-
-            config RT_WLAN_DEV_DEBUG
-                bool "Enable Debugging of wlan_dev.c"
-                default n
-
-            config RT_WLAN_PROT_DEBUG
-                bool "Enable Debugging of wlan_prot.c"
-                default n
-
-            config RT_WLAN_CFG_DEBUG
-                bool "Enable Debugging of wlan_cfg.c"
-                default n
-
-            config RT_WLAN_LWIP_DEBUG
-                bool "Enable Debugging of wlan_lwip.c"
-                default n
-        endif
-    endif
-
-menuconfig RT_USING_VIRTIO
-    bool "Using VirtIO device drivers"
-    default n
-
-    if RT_USING_VIRTIO
-        choice
-            prompt "VirtIO Version"
-            default RT_USING_VIRTIO10
-
-            config RT_USING_VIRTIO10
-                bool "VirtIO v1.0"
-        endchoice
-
-        config RT_USING_VIRTIO_MMIO_ALIGN
-            bool "Using VirtIO MMIO alignment"
-            default y
-
-        config RT_USING_VIRTIO_BLK
-            bool "Using VirtIO BLK"
-            default y
-
-        config RT_USING_VIRTIO_NET
-            bool "Using VirtIO NET"
-            default y
-
-        menuconfig RT_USING_VIRTIO_CONSOLE
-            bool "Using VirtIO Console"
-            default y
-
-            if RT_USING_VIRTIO_CONSOLE
-                config RT_USING_VIRTIO_CONSOLE_PORT_MAX_NR
-                    int "Max number of port in VirtIO Console"
-                    default 4
-            endif
-
-        config RT_USING_VIRTIO_GPU
-            bool "Using VirtIO GPU"
-            default y
-
-        config RT_USING_VIRTIO_INPUT
-            bool "Using VirtIO Input"
-            default y
-    endif
-
-source "$RTT_DIR/components/drivers/ofw/Kconfig"
-source "$RTT_DIR/components/drivers/pic/Kconfig"
-source "$RTT_DIR/components/drivers/pin/Kconfig"
-source "$RTT_DIR/components/drivers/pinctrl/Kconfig"
-source "$RTT_DIR/components/drivers/ktime/Kconfig"
-source "$RTT_DIR/components/drivers/clk/Kconfig"
-source "$RTT_DIR/components/drivers/hwtimer/Kconfig"
-source "$RTT_DIR/components/drivers/usb/cherryusb/Kconfig"
+rsource "serial/Kconfig"
+rsource "can/Kconfig"
+rsource "cputime/Kconfig"
+rsource "i2c/Kconfig"
+rsource "phy/Kconfig"
+rsource "misc/Kconfig"
+rsource "mtd/Kconfig"
+rsource "pm/Kconfig"
+rsource "rtc/Kconfig"
+rsource "sdio/Kconfig"
+rsource "spi/Kconfig"
+rsource "watchdog/Kconfig"
+rsource "audio/Kconfig"
+rsource "sensor/Kconfig"
+rsource "touch/Kconfig"
+rsource "graphic/Kconfig"
+rsource "hwcrypto/Kconfig"
+rsource "wlan/Kconfig"
+rsource "virtio/Kconfig"
+rsource "ofw/Kconfig"
+rsource "pic/Kconfig"
+rsource "pin/Kconfig"
+rsource "pinctrl/Kconfig"
+rsource "ktime/Kconfig"
+rsource "clk/Kconfig"
+rsource "hwtimer/Kconfig"
+rsource "usb/Kconfig"
+rsource "fdt/Kconfig"
 
 endmenu