rename rt_sen_ to rt_sensor_

3 files changed, 103 insertions, 103 deletions

diff --git a/components/drivers/sensors/sensor.c b/components/drivers/sensors/sensor.c
index 80c9a60ae0..98a0e8aa74 100644
--- a/components/drivers/sensors/sensor.c
+++ b/components/drivers/sensors/sensor.c
@@ -51,12 +51,12 @@ void rt_sensor_cb(rt_sensor_t sen)
     {
         sen->parent.rx_indicate(&sen->parent, sen->data_len / sizeof(struct rt_sensor_data));
     }
-    else if (sen->config.mode == RT_SEN_MODE_INT)
+    else if (sen->config.mode == RT_SENSOR_MODE_INT)
     {
         /* The interrupt mode only produces one data at a time */
         sen->parent.rx_indicate(&sen->parent, 1);
     }
-    else if (sen->config.mode == RT_SEN_MODE_FIFO)
+    else if (sen->config.mode == RT_SENSOR_MODE_FIFO)
     {
         sen->parent.rx_indicate(&sen->parent, sen->info.fifo_max);
     }
@@ -164,27 +164,27 @@ static rt_err_t rt_sensor_open(rt_device_t dev, rt_uint16_t oflag)
     if (oflag & RT_DEVICE_FLAG_RDONLY && dev->flag & RT_DEVICE_FLAG_RDONLY)
     {
         /* If polling mode is supported, configure it to polling mode */
-        if (sensor->ops->control(sensor, RT_SEN_CTRL_SET_MODE, (void *)RT_SEN_MODE_POLLING) == RT_EOK)
+        if (sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_MODE, (void *)RT_SENSOR_MODE_POLLING) == RT_EOK)
         {
-            sensor->config.mode = RT_SEN_MODE_POLLING;
+            sensor->config.mode = RT_SENSOR_MODE_POLLING;
         }
     }
     else if (oflag & RT_DEVICE_FLAG_INT_RX && dev->flag & RT_DEVICE_FLAG_INT_RX)
     {
         /* If interrupt mode is supported, configure it to interrupt mode */
-        if (sensor->ops->control(sensor, RT_SEN_CTRL_SET_MODE, (void *)RT_SEN_MODE_INT) == RT_EOK)
+        if (sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_MODE, (void *)RT_SENSOR_MODE_INT) == RT_EOK)
         {
-            sensor->config.mode = RT_SEN_MODE_INT;
+            sensor->config.mode = RT_SENSOR_MODE_INT;
             /* Initialization sensor interrupt */
             rt_sensor_irq_init(sensor);
         }
     }
-    else if (oflag & RT_SEN_FLAG_FIFO && dev->flag & RT_SEN_FLAG_FIFO)
+    else if (oflag & RT_SENSOR_FLAG_FIFO && dev->flag & RT_SENSOR_FLAG_FIFO)
     {
         /* If fifo mode is supported, configure it to fifo mode */
-        if (sensor->ops->control(sensor, RT_SEN_CTRL_SET_MODE, (void *)RT_SEN_MODE_FIFO) == RT_EOK)
+        if (sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_MODE, (void *)RT_SENSOR_MODE_FIFO) == RT_EOK)
         {
-            sensor->config.mode = RT_SEN_MODE_FIFO;
+            sensor->config.mode = RT_SENSOR_MODE_FIFO;
             /* Initialization sensor interrupt */
             rt_sensor_irq_init(sensor);
         }
@@ -195,9 +195,9 @@ static rt_err_t rt_sensor_open(rt_device_t dev, rt_uint16_t oflag)
     }
 
     /* Configure power mode to normal mode */
-    if (sensor->ops->control(sensor, RT_SEN_CTRL_SET_POWER, (void *)RT_SEN_POWER_NORMAL) == RT_EOK)
+    if (sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_POWER, (void *)RT_SENSOR_POWER_NORMAL) == RT_EOK)
     {
-        sensor->config.power = RT_SEN_POWER_NORMAL;
+        sensor->config.power = RT_SENSOR_POWER_NORMAL;
     }
 
     if (sensor->module)
@@ -220,9 +220,9 @@ static rt_err_t  rt_sensor_close(rt_device_t dev)
     }
 
     /* Configure power mode to power down mode */
-    if (sensor->ops->control(sensor, RT_SEN_CTRL_SET_POWER, (void *)RT_SEN_POWER_DOWN) == RT_EOK)
+    if (sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_POWER, (void *)RT_SENSOR_POWER_DOWN) == RT_EOK)
     {
-        sensor->config.power = RT_SEN_POWER_DOWN;
+        sensor->config.power = RT_SENSOR_POWER_DOWN;
     }
 
     /* Sensor disable interrupt */
@@ -293,71 +293,71 @@ static rt_err_t rt_sensor_control(rt_device_t dev, int cmd, void *args)
 
     switch (cmd)
     {
-    case RT_SEN_CTRL_GET_ID:
+    case RT_SENSOR_CTRL_GET_ID:
         if (args)
         {
-            sensor->ops->control(sensor, RT_SEN_CTRL_GET_ID, args);
+            sensor->ops->control(sensor, RT_SENSOR_CTRL_GET_ID, args);
         }
         break;
-    case RT_SEN_CTRL_GET_INFO:
+    case RT_SENSOR_CTRL_GET_INFO:
         if (args)
         {
             rt_memcpy(args, &sensor->info, sizeof(struct rt_sensor_info));
         }
         break;
-    case RT_SEN_CTRL_SET_RANGE:
+    case RT_SENSOR_CTRL_SET_RANGE:
 
         /* Configuration measurement range */
-        result = sensor->ops->control(sensor, RT_SEN_CTRL_SET_RANGE, args);
+        result = sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_RANGE, args);
         if (result == RT_EOK)
         {
             sensor->config.range = (rt_int32_t)args;
             LOG_D("set range %d", sensor->config.range);
         }
         break;
-    case RT_SEN_CTRL_SET_ODR:
+    case RT_SENSOR_CTRL_SET_ODR:
         
         /* Configuration data output rate */
-        result = sensor->ops->control(sensor, RT_SEN_CTRL_SET_ODR, args);
+        result = sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_ODR, args);
         if (result == RT_EOK)
         {
             sensor->config.odr = (rt_uint32_t)args & 0xFFFF;
             LOG_D("set odr %d", sensor->config.odr);
         }
         break;
-    case RT_SEN_CTRL_SET_MODE:
+    case RT_SENSOR_CTRL_SET_MODE:
         
         /* Configuration sensor work mode */
-        result = sensor->ops->control(sensor, RT_SEN_CTRL_SET_MODE, args);
+        result = sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_MODE, args);
         if (result == RT_EOK)
         {
             sensor->config.mode = (rt_uint32_t)args & 0xFF;
             LOG_D("set work mode code:", sensor->config.mode);
 
-            if (sensor->config.mode == RT_SEN_MODE_POLLING)
+            if (sensor->config.mode == RT_SENSOR_MODE_POLLING)
             {
                 rt_sensor_irq_disable(sensor);
             }
-            else if (sensor->config.mode == RT_SEN_MODE_INT || sensor->config.mode == RT_SEN_MODE_FIFO)
+            else if (sensor->config.mode == RT_SENSOR_MODE_INT || sensor->config.mode == RT_SENSOR_MODE_FIFO)
             {
                 rt_sensor_irq_enable(sensor);
             }
         }
         break;
-    case RT_SEN_CTRL_SET_POWER:
+    case RT_SENSOR_CTRL_SET_POWER:
         
         /* Configuration sensor power mode */
-        result = sensor->ops->control(sensor, RT_SEN_CTRL_SET_POWER, args);
+        result = sensor->ops->control(sensor, RT_SENSOR_CTRL_SET_POWER, args);
         if (result == RT_EOK)
         {
             sensor->config.power = (rt_uint32_t)args & 0xFF;
             LOG_D("set power mode code:", sensor->config.power);
         }
         break;
-    case RT_SEN_CTRL_SELF_TEST:
+    case RT_SENSOR_CTRL_SELF_TEST:
         
         /* Device self-test */
-        result = sensor->ops->control(sensor, RT_SEN_CTRL_SELF_TEST, args);
+        result = sensor->ops->control(sensor, RT_SENSOR_CTRL_SELF_TEST, args);
         break;
     default:
         return -RT_ERROR;
diff --git a/components/drivers/sensors/sensor.h b/components/drivers/sensors/sensor.h
index 75011a6db2..f6afdb6dbb 100644
--- a/components/drivers/sensors/sensor.h
+++ b/components/drivers/sensors/sensor.h
@@ -19,86 +19,86 @@ extern "C" {
 #endif
 
 #ifdef RT_USING_RTC
-#define  rt_sen_get_timestamp()  time()          /* API for the sensor to get the timestamp */
+#define  rt_sensor_get_ts()  time()          /* API for the sensor to get the timestamp */
 #else
-#define  rt_sen_get_timestamp()  rt_tick_get()   /* API for the sensor to get the timestamp */
+#define  rt_sensor_get_ts()  rt_tick_get()   /* API for the sensor to get the timestamp */
 #endif
 
 #define  RT_PIN_NONE                   0xFFFF    /* RT PIN NONE */
-#define  RT_SEN_FLAG_FIFO              0x200     /* Flag to use when the sensor is open by fifo mode */
+#define  RT_SENSOR_FLAG_FIFO           0x200     /* Flag to use when the sensor is open by fifo mode */
 
-#define  RT_SEN_MODULE_MAX             (3)       /* The maximum number of members of a sensor module */
+#define  RT_SENSOR_MODULE_MAX          (3)       /* The maximum number of members of a sensor module */
 
 /* Sensor types */
 
-#define RT_SEN_CLASS_NONE              (0)
-#define RT_SEN_CLASS_ACCE              (1)  /* Accelerometer     */
-#define RT_SEN_CLASS_GYRO              (2)  /* Gyroscope         */
-#define RT_SEN_CLASS_MAG               (3)  /* Magnetometer      */
-#define RT_SEN_CLASS_TEMP              (4)  /* Temperature       */
-#define RT_SEN_CLASS_HUMI              (5)  /* Relative Humidity */
-#define RT_SEN_CLASS_BARO              (6)  /* Barometer         */
-#define RT_SEN_CLASS_LIGHT             (7)  /* Ambient light     */
-#define RT_SEN_CLASS_PROXIMITY         (8)  /* Proximity         */
-#define RT_SEN_CLASS_HR                (9)  /* Heart Rate        */
-#define RT_SEN_CLASS_TVOC              (10) /* TVOC Level        */
-#define RT_SEN_CLASS_NOISE             (11) /* Noise Loudness    */
-#define RT_SEN_CLASS_STEP              (12) /* Step sensor       */
+#define RT_SENSOR_CLASS_NONE           (0)
+#define RT_SENSOR_CLASS_ACCE           (1)  /* Accelerometer     */
+#define RT_SENSOR_CLASS_GYRO           (2)  /* Gyroscope         */
+#define RT_SENSOR_CLASS_MAG            (3)  /* Magnetometer      */
+#define RT_SENSOR_CLASS_TEMP           (4)  /* Temperature       */
+#define RT_SENSOR_CLASS_HUMI           (5)  /* Relative Humidity */
+#define RT_SENSOR_CLASS_BARO           (6)  /* Barometer         */
+#define RT_SENSOR_CLASS_LIGHT          (7)  /* Ambient light     */
+#define RT_SENSOR_CLASS_PROXIMITY      (8)  /* Proximity         */
+#define RT_SENSOR_CLASS_HR             (9)  /* Heart Rate        */
+#define RT_SENSOR_CLASS_TVOC           (10) /* TVOC Level        */
+#define RT_SENSOR_CLASS_NOISE          (11) /* Noise Loudness    */
+#define RT_SENSOR_CLASS_STEP           (12) /* Step sensor       */
 
 /* Sensor vendor types */
 
-#define RT_SEN_VENDOR_UNKNOWN          (0)
-#define RT_SEN_VENDOR_STM              (1)  /* STMicroelectronics */
-#define RT_SEN_VENDOR_BOSCH            (2)  /* Bosch */
-#define RT_SEN_VENDOR_INVENSENSE       (3)  /* Invensense */
-#define RT_SEN_VENDOR_SEMTECH          (4)  /* Semtech */
-#define RT_SEN_VENDOR_GOERTEK          (5)  /* Goertek */
+#define RT_SENSOR_VENDOR_UNKNOWN       (0)
+#define RT_SENSOR_VENDOR_STM           (1)  /* STMicroelectronics */
+#define RT_SENSOR_VENDOR_BOSCH         (2)  /* Bosch */
+#define RT_SENSOR_VENDOR_INVENSENSE    (3)  /* Invensense */
+#define RT_SENSOR_VENDOR_SEMTECH       (4)  /* Semtech */
+#define RT_SENSOR_VENDOR_GOERTEK       (5)  /* Goertek */
 
 /* Sensor unit types */
 
-#define  RT_SEN_UNIT_NONE              (0)
-#define  RT_SEN_UNIT_MG                (1)  /* Accelerometer           unit: mG         */
-#define  RT_SEN_UNIT_MDPS              (2)  /* Gyroscope               unit: mdps       */
-#define  RT_SEN_UNIT_MGAUSS            (3)  /* Magnetometer            unit: mGauss     */
-#define  RT_SEN_UNIT_LUX               (4)  /* Ambient light           unit: lux        */
-#define  RT_SEN_UNIT_CM                (5)  /* Distance                unit: cm         */
-#define  RT_SEN_UNIT_PA                (6)  /* Barometer               unit: pa         */
-#define  RT_SEN_UNIT_PERMILLAGE        (7)  /* Relative Humidity       unit: permillage */
-#define  RT_SEN_UNIT_DCELSIUS          (8)  /* Temperature             unit: dCelsius   */
-#define  RT_SEN_UNIT_HZ                (9)  /* Frequency               unit: HZ         */
-#define  RT_SEN_UNIT_ONE               (10) /* Dimensionless quantity  unit: 1          */
+#define  RT_SENSOR_UNIT_NONE           (0)
+#define  RT_SENSOR_UNIT_MG             (1)  /* Accelerometer           unit: mG         */
+#define  RT_SENSOR_UNIT_MDPS           (2)  /* Gyroscope               unit: mdps       */
+#define  RT_SENSOR_UNIT_MGAUSS         (3)  /* Magnetometer            unit: mGauss     */
+#define  RT_SENSOR_UNIT_LUX            (4)  /* Ambient light           unit: lux        */
+#define  RT_SENSOR_UNIT_CM             (5)  /* Distance                unit: cm         */
+#define  RT_SENSOR_UNIT_PA             (6)  /* Barometer               unit: pa         */
+#define  RT_SENSOR_UNIT_PERMILLAGE     (7)  /* Relative Humidity       unit: permillage */
+#define  RT_SENSOR_UNIT_DCELSIUS       (8)  /* Temperature             unit: dCelsius   */
+#define  RT_SENSOR_UNIT_HZ             (9)  /* Frequency               unit: HZ         */
+#define  RT_SENSOR_UNIT_ONE            (10) /* Dimensionless quantity  unit: 1          */
 
 /* Sensor communication interface types */
 
-#define  RT_SEN_INTF_I2C               (1 << 0)
-#define  RT_SEN_INTF_SPI               (1 << 1)
-#define  RT_SEN_INTF_UART              (1 << 2)
-#define  RT_SEN_INTF_ONEWIRE           (1 << 3)
+#define  RT_SENSOR_INTF_I2C            (1 << 0)
+#define  RT_SENSOR_INTF_SPI            (1 << 1)
+#define  RT_SENSOR_INTF_UART           (1 << 2)
+#define  RT_SENSOR_INTF_ONEWIRE        (1 << 3)
 
 /* Sensor power mode types */
 
-#define  RT_SEN_POWER_NONE             (0)
-#define  RT_SEN_POWER_DOWN             (1)  /* power down mode   */
-#define  RT_SEN_POWER_NORMAL           (2)  /* normal-power mode */
-#define  RT_SEN_POWER_LOW              (3)  /* low-power mode    */
-#define  RT_SEN_POWER_HIGH             (4)  /* high-power mode   */
+#define  RT_SENSOR_POWER_NONE          (0)
+#define  RT_SENSOR_POWER_DOWN          (1)  /* power down mode   */
+#define  RT_SENSOR_POWER_NORMAL        (2)  /* normal-power mode */
+#define  RT_SENSOR_POWER_LOW           (3)  /* low-power mode    */
+#define  RT_SENSOR_POWER_HIGH          (4)  /* high-power mode   */
 
 /* Sensor work mode types */
 
-#define  RT_SEN_MODE_NONE              (0)
-#define  RT_SEN_MODE_POLLING           (1)  /* One shot only read a data */
-#define  RT_SEN_MODE_INT               (2)  /* TODO: One shot interrupt only read a data */
-#define  RT_SEN_MODE_FIFO              (3)  /* TODO: One shot interrupt read all fifo data */
+#define  RT_SENSOR_MODE_NONE           (0)
+#define  RT_SENSOR_MODE_POLLING        (1)  /* One shot only read a data */
+#define  RT_SENSOR_MODE_INT            (2)  /* TODO: One shot interrupt only read a data */
+#define  RT_SENSOR_MODE_FIFO           (3)  /* TODO: One shot interrupt read all fifo data */
 
 /* Sensor control cmd types */
 
-#define  RT_SEN_CTRL_GET_ID            (0)  /* Get device id */
-#define  RT_SEN_CTRL_GET_INFO          (1)  /* Get sensor info */
-#define  RT_SEN_CTRL_SET_RANGE         (2)  /* Set the measure range of sensor. unit is info of sensor */
-#define  RT_SEN_CTRL_SET_ODR           (3)  /* Set output date rate. unit is HZ */
-#define  RT_SEN_CTRL_SET_MODE          (4)  /* Set sensor's work mode. ex. RT_SEN_MODE_POLLING,RT_SEN_MODE_INT */
-#define  RT_SEN_CTRL_SET_POWER         (5)  /* Set power mode. args type of sensor power mode. ex. RT_SEN_POWER_DOWN,RT_SEN_POWER_NORMAL */
-#define  RT_SEN_CTRL_SELF_TEST         (6)  /* Take a self test */
+#define  RT_SENSOR_CTRL_GET_ID         (0)  /* Get device id */
+#define  RT_SENSOR_CTRL_GET_INFO       (1)  /* Get sensor info */
+#define  RT_SENSOR_CTRL_SET_RANGE      (2)  /* Set the measure range of sensor. unit is info of sensor */
+#define  RT_SENSOR_CTRL_SET_ODR        (3)  /* Set output date rate. unit is HZ */
+#define  RT_SENSOR_CTRL_SET_MODE       (4)  /* Set sensor's work mode. ex. RT_SENSOR_MODE_POLLING,RT_SENSOR_MODE_INT */
+#define  RT_SENSOR_CTRL_SET_POWER      (5)  /* Set power mode. args type of sensor power mode. ex. RT_SENSOR_POWER_DOWN,RT_SENSOR_POWER_NORMAL */
+#define  RT_SENSOR_CTRL_SELF_TEST      (6)  /* Take a self test */
 
 struct rt_sensor_info
 {
@@ -148,10 +148,10 @@ typedef struct rt_sensor_device *rt_sensor_t;
 
 struct rt_sensor_module
 {
-    rt_mutex_t                   lock;                   /* The module lock */
+    rt_mutex_t                   lock;                      /* The module lock */
 
-    rt_sensor_t                  sen[RT_SEN_MODULE_MAX]; /* The module contains a list of sensors */
-    rt_uint8_t                   sen_num;                /* Number of sensors contained in the module */
+    rt_sensor_t                  sen[RT_SENSOR_MODULE_MAX]; /* The module contains a list of sensors */
+    rt_uint8_t                   sen_num;                   /* Number of sensors contained in the module */
 };
 
 /* 3-axis Data Type */
diff --git a/components/drivers/sensors/sensor_test.c b/components/drivers/sensors/sensor_test.c
index 0221167e83..4b7fea2d03 100644
--- a/components/drivers/sensors/sensor_test.c
+++ b/components/drivers/sensors/sensor_test.c
@@ -25,25 +25,25 @@ static void sensor_show_data(rt_size_t num, rt_sensor_t sensor, struct rt_sensor
 {
     switch (sensor->info.type)
     {
-    case RT_SEN_CLASS_ACCE:
+    case RT_SENSOR_CLASS_ACCE:
         LOG_I("num:%3d, x:%5d, y:%5d, z:%5d, timestamp:%5d", num, sensor_data->data.acce.x, sensor_data->data.acce.y, sensor_data->data.acce.z, sensor_data->timestamp);
         break;
-    case RT_SEN_CLASS_GYRO:
+    case RT_SENSOR_CLASS_GYRO:
         LOG_I("num:%3d, x:%8d, y:%8d, z:%8d, timestamp:%5d", num, sensor_data->data.gyro.x, sensor_data->data.gyro.y, sensor_data->data.gyro.z, sensor_data->timestamp);
         break;
-    case RT_SEN_CLASS_MAG:
+    case RT_SENSOR_CLASS_MAG:
         LOG_I("num:%3d, x:%5d, y:%5d, z:%5d, timestamp:%5d", num, sensor_data->data.mag.x, sensor_data->data.mag.y, sensor_data->data.mag.z, sensor_data->timestamp);
         break;
-    case RT_SEN_CLASS_HUMI:
+    case RT_SENSOR_CLASS_HUMI:
         LOG_I("num:%3d, humi:%3d.%d%%, timestamp:%5d", num, sensor_data->data.humi / 10, sensor_data->data.humi % 10, sensor_data->timestamp);
         break;
-    case RT_SEN_CLASS_TEMP:
+    case RT_SENSOR_CLASS_TEMP:
         LOG_I("num:%3d, temp:%3d.%dC, timestamp:%5d", num, sensor_data->data.temp / 10, sensor_data->data.temp % 10, sensor_data->timestamp);
         break;
-    case RT_SEN_CLASS_BARO:
+    case RT_SENSOR_CLASS_BARO:
         LOG_I("num:%3d, press:%5d, timestamp:%5d", num, sensor_data->data.baro, sensor_data->timestamp);
         break;
-    case RT_SEN_CLASS_STEP:
+    case RT_SENSOR_CLASS_STEP:
         LOG_I("num:%3d, step:%5d, timestamp:%5d", num, sensor_data->data.step, sensor_data->timestamp);
         break;
     default:
@@ -65,7 +65,7 @@ static void sensor_fifo_rx_entry(void *parameter)
     struct rt_sensor_info info;
     rt_size_t res, i;
     
-    rt_device_control(dev, RT_SEN_CTRL_GET_INFO, &info);
+    rt_device_control(dev, RT_SENSOR_CTRL_GET_INFO, &info);
 
     data = rt_malloc(sizeof(struct rt_sensor_data) * info.fifo_max);
     if (data == RT_NULL)
@@ -119,12 +119,12 @@ static void sensor_fifo(int argc, char **argv)
 
     rt_device_set_rx_indicate(dev, rx_callback);
 
-    if (rt_device_open(dev, RT_SEN_FLAG_FIFO) != RT_EOK)
+    if (rt_device_open(dev, RT_SENSOR_FLAG_FIFO) != RT_EOK)
     {
         LOG_E("open device failed!");
         return;
     }
-    rt_device_control(dev, RT_SEN_CTRL_SET_ODR, (void *)20);
+    rt_device_control(dev, RT_SENSOR_CTRL_SET_ODR, (void *)20);
 }
 #ifdef FINSH_USING_MSH
 MSH_CMD_EXPORT(sensor_fifo, Sensor fifo mode test function);
@@ -188,7 +188,7 @@ static void sensor_int(int argc, char **argv)
         LOG_E("open device failed!");
         return;
     }
-    rt_device_control(dev, RT_SEN_CTRL_SET_ODR, (void *)20);
+    rt_device_control(dev, RT_SENSOR_CTRL_SET_ODR, (void *)20);
 }
 #ifdef FINSH_USING_MSH
 MSH_CMD_EXPORT(sensor_int, Sensor interrupt mode test function);
@@ -218,7 +218,7 @@ static void sensor_polling(int argc, char **argv)
         LOG_E("open device failed!");
         return;
     }
-    rt_device_control(dev, RT_SEN_CTRL_SET_ODR, (void *)100);
+    rt_device_control(dev, RT_SENSOR_CTRL_SET_ODR, (void *)100);
 
     for (i = 0; i < num; i++)
     {
@@ -263,7 +263,7 @@ static void sensor(int argc, char **argv)
     else if (!strcmp(argv[1], "info"))
     {
         struct rt_sensor_info info;
-        rt_device_control(dev, RT_SEN_CTRL_GET_INFO, &info);
+        rt_device_control(dev, RT_SENSOR_CTRL_GET_INFO, &info);
         rt_kprintf("vendor :%d\n", info.vendor);
         rt_kprintf("model  :%s\n", info.model);
         rt_kprintf("unit   :%d\n", info.unit);
@@ -321,7 +321,7 @@ static void sensor(int argc, char **argv)
                 LOG_E("open device failed!");
                 return;
             }
-            rt_device_control(dev, RT_SEN_CTRL_GET_ID, &reg);
+            rt_device_control(dev, RT_SENSOR_CTRL_GET_ID, &reg);
             LOG_I("device id: 0x%x!", reg);
 
         }
@@ -332,19 +332,19 @@ static void sensor(int argc, char **argv)
         }
         else if (!strcmp(argv[1], "sr"))
         {
-            rt_device_control(dev, RT_SEN_CTRL_SET_RANGE, (void *)atoi(argv[2]));
+            rt_device_control(dev, RT_SENSOR_CTRL_SET_RANGE, (void *)atoi(argv[2]));
         }
         else if (!strcmp(argv[1], "sm"))
         {
-            rt_device_control(dev, RT_SEN_CTRL_SET_MODE, (void *)atoi(argv[2]));
+            rt_device_control(dev, RT_SENSOR_CTRL_SET_MODE, (void *)atoi(argv[2]));
         }
         else if (!strcmp(argv[1], "sp"))
         {
-            rt_device_control(dev, RT_SEN_CTRL_SET_POWER, (void *)atoi(argv[2]));
+            rt_device_control(dev, RT_SENSOR_CTRL_SET_POWER, (void *)atoi(argv[2]));
         }
         else if (!strcmp(argv[1], "sodr"))
         {
-            rt_device_control(dev, RT_SEN_CTRL_SET_ODR, (void *)atoi(argv[2]));
+            rt_device_control(dev, RT_SENSOR_CTRL_SET_ODR, (void *)atoi(argv[2]));
         }
         else
         {