[External] Remove external from RT-Thread

1 files changed, 0 insertions, 2718 deletions

diff --git a/components/external/SQLite-3.8.1/src/os_rtthread.c b/components/external/SQLite-3.8.1/src/os_rtthread.c
deleted file mode 100644
index 6d57ed7098..0000000000
--- a/components/external/SQLite-3.8.1/src/os_rtthread.c
+++ /dev/null
@@ -1,2718 +0,0 @@
-/*
-** 2004 May 22
-**
-** The author disclaims copyright to this source code.  In place of
-** a legal notice, here is a blessing:
-**
-**    May you do good and not evil.
-**    May you find forgiveness for yourself and forgive others.
-**    May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains code that is specific to Windows.
-*/
-#include "sqliteInt.h"
-#if SQLITE_OS_RTTHREAD               /* This file is used for rt-thread only */
-
-#include <rtthread.h>
-#include <dfs_posix.h>
-
-/*
-** Include code that is common to all os_*.c files
-*/
-#include "os_common.h"
-
-#ifndef RT_USING_NEWLIB
-
-#ifndef EINTR
-#define EINTR        4  /* Interrupted system call */
-#endif
-
-#ifndef ENOLCK
-#define ENOLCK      46  /* No record locks available */
-#endif
-
-#ifndef EACCES
-#define EACCES      13  /* Permission denied */
-#endif
-
-#ifndef EPERM
-#define EPERM        1  /* Operation not permitted */
-#endif
-
-#ifndef ETIMEDOUT
-#define ETIMEDOUT   145 /* Connection timed out */
-#endif
-
-#ifndef ENOTCONN
-#define ENOTCONN    134 /* Transport endpoint is not connected */
-#endif
-
-#if defined(__GNUC__) || defined(__ADSPBLACKFIN__)
-int _gettimeofday(struct timeval *tp, void *ignore) __attribute__((weak));
-int _gettimeofday(struct timeval *tp, void *ignore)
-#elif defined(__CC_ARM)
-__weak int _gettimeofday(struct timeval *tp, void *ignore)
-#elif defined(__IAR_SYSTEMS_ICC__)
-    #if __VER__ > 540
-    __weak
-    #endif
-int _gettimeofday(struct timeval *tp, void *ignore)
-#else
-int _gettimeofday(struct timeval *tp, void *ignore)
-#endif
-{
-    return 0;
-}
-
-#endif /* RT_USING_NEWLIB */
-
-/*
-** Compiling and using WAL mode requires several APIs that are not
-** available in rt-thread.
-*/
-#if !defined(SQLITE_OMIT_WAL)
-#  error "WAL mode requires not support from the rt-thread, compile\
- with SQLITE_OMIT_WAL."
-#endif
-
-/*
-** Are most of the rtthread ANSI APIs available (i.e. with certain exceptions
-** based on the sub-platform)?
-*/
-#if !defined(SQLITE_RTTHREAD_NO_ANSI)
-#  warning "please ensure rtthread ANSI APIs is available, otherwise compile with\
- SQLITE_RTTHREAD_NO_ANSI"
-#  define SQLITE_RTTHREAD_HAS_ANSI
-#endif
-
-/*
-** Are most of the rtthread Unicode APIs available (i.e. with certain exceptions
-** based on the sub-platform)?
-*/
-#if !defined(SQLITE_RTTHREAD_NO_WIDE)
-#  error "rtthread not support Unicode APIs"
-#  define SQLITE_RTTHREAD_HAS_WIDE
-#endif
-
-/*
-** Make sure at least one set of rtthread APIs is available.
-*/
-#if !defined(SQLITE_RTTHREAD_HAS_ANSI) && !defined(SQLITE_RTTHREAD_HAS_WIDE)
-#  error "At least one of SQLITE_RTTHREAD_HAS_ANSI and SQLITE_RTTHREAD_HAS_WIDE\
- must be defined."
-#endif
-
-/*
-** Maximum pathname length (in chars) for rtthread.  This should normally be
-** MAX_PATH.
-*/
-#ifndef SQLITE_RTTHREAD_MAX_PATH_CHARS
-#  warning "default Maximum pathname length be 255, otherwise compile with\
- SQLITE_RTTHREAD_MAX_PATH_CHARS=?"
-#  define SQLITE_RTTHREAD_MAX_PATH_CHARS   (255)
-#endif
-
-/*
-** Maximum supported path-length.
-*/
-#define MAX_PATHNAME 512
-
-/*
-** Returns non-zero if the character should be treated as a directory
-** separator.
-*/
-#ifndef rtthreadIsDirSep
-#  define rtthreadIsDirSep(a)                ((a) == '/')
-#endif
-
-/*
-** This macro is used when a local variable is set to a value that is
-** [sometimes] not used by the code (e.g. via conditional compilation).
-*/
-#ifndef UNUSED_VARIABLE_VALUE
-#  define UNUSED_VARIABLE_VALUE(x) (void)(x)
-#endif
-
-/*
-** Returns the string that should be used as the directory separator.
-*/
-#ifndef rtthreadGetDirDep
-#    define rtthreadGetDirDep()              "/"
-#endif
-
-/*
-** The winFile structure is a subclass of sqlite3_file* specific to the win32
-** portability layer.
-*/
-typedef struct rtthreadFile rtthreadFile;
-struct rtthreadFile {
-  sqlite3_io_methods const *pMethod;  /* Always the first entry */
-  sqlite3_vfs *pVfs;                  /* The VFS that created this rtthreadFile */
-  int h;                              /* The file descriptor */
-  unsigned short int ctrlFlags;       /* Behavioral bits.  UNIXFILE_* flags */
-  unsigned char eFileLock;            /* The type of lock held on this fd */
-  int lastErrno;                      /* The unix errno from last I/O error */
-  void *lockingContext;               /* Locking style specific state */
-  const char *zPath;                  /* Name of the file */
-  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */
-#if SQLITE_ENABLE_LOCKING_STYLE
-  int openFlags;                      /* The flags specified at open() */
-#endif
-#if SQLITE_ENABLE_LOCKING_STYLE
-  unsigned fsFlags;                   /* cached details from statfs() */
-#endif
-#ifdef SQLITE_DEBUG
-  /* The next group of variables are used to track whether or not the
-  ** transaction counter in bytes 24-27 of database files are updated
-  ** whenever any part of the database changes.  An assertion fault will
-  ** occur if a file is updated without also updating the transaction
-  ** counter.  This test is made to avoid new problems similar to the
-  ** one described by ticket #3584.
-  */
-  unsigned char transCntrChng;   /* True if the transaction counter changed */
-  unsigned char dbUpdate;        /* True if any part of database file changed */
-  unsigned char inNormalWrite;   /* True if in a normal write operation */
-
-#endif
-
-#ifdef SQLITE_TEST
-  /* In test mode, increase the size of this structure a bit so that
-  ** it is larger than the struct CrashFile defined in test6.c.
-  */
-  char aPadding[32];
-#endif
-};
-
-/*
-** Allowed values for the rtthreadFile.ctrlFlags bitmask:
-*/
-#define UNIXFILE_EXCL        0x01     /* Connections from one process only */
-#define UNIXFILE_RDONLY      0x02     /* Connection is read only */
-#define UNIXFILE_PERSIST_WAL 0x04     /* Persistent WAL mode */
-#ifndef SQLITE_DISABLE_DIRSYNC
-# define UNIXFILE_DIRSYNC    0x08     /* Directory sync needed */
-#else
-# define UNIXFILE_DIRSYNC    0x00
-#endif
-#define UNIXFILE_PSOW        0x10     /* SQLITE_IOCAP_POWERSAFE_OVERWRITE */
-#define UNIXFILE_DELETE      0x20     /* Delete on close */
-#define UNIXFILE_URI         0x40     /* Filename might have query parameters */
-#define UNIXFILE_NOLOCK      0x80     /* Do no file locking */
-#define UNIXFILE_WARNED    0x0100     /* verifyDbFile() warnings have been issued */
-
-/*
-** The following variable is (normally) set once and never changes
-** thereafter.  It records whether the operating system is Win9x
-** or WinNT.
-**
-** 0:   Operating system unknown.
-** 1:   Operating system is rtthread.
-**
-** In order to facilitate testing on a rtthread system, the test fixture
-** can manually set this value to 1 to emulate Win98 behavior.
-*/
-#ifdef SQLITE_TEST
-int sqlite3_os_type = 0;
-#elif !SQLITE_OS_RTTHREAD && \
-      defined(SQLITE_RTTHREAD_HAS_ANSI) && defined(SQLITE_RTTHREAD_HAS_WIDE)
-static int sqlite3_os_type = 0;
-#endif
-
-#ifndef SYSCALL
-#  define SYSCALL sqlite3_syscall_ptr
-#endif
-
-#include <dfs_posix.h>
-
-static int _Access(const char *pathname, int mode)
-{
-    int fd;
-
-    fd = open(pathname, O_RDONLY, mode);
-
-    if (fd >= 0)
-    {
-        close(fd);
-        return 0;
-    }
-
-    return -1;
-}
-
-/*
-** Invoke open().  Do so multiple times, until it either succeeds or
-** fails for some reason other than EINTR.
-**
-** If the file creation mode "m" is 0 then set it to the default for
-** SQLite.  The default is SQLITE_DEFAULT_FILE_PERMISSIONS (normally
-** 0644) as modified by the system umask.  If m is not 0, then
-** make the file creation mode be exactly m ignoring the umask.
-**
-** The m parameter will be non-zero only when creating -wal, -journal,
-** and -shm files.  We want those files to have *exactly* the same
-** permissions as their original database, unadulterated by the umask.
-** In that way, if a database file is -rw-rw-rw or -rw-rw-r-, and a
-** transaction crashes and leaves behind hot journals, then any
-** process that is able to write to the database will also be able to
-** recover the hot journals.
-*/
-static int robust_open(const char *z, int f, mode_t m);
-
-/*
-** Open a file descriptor to the directory containing file zFilename.
-** If successful, *pFd is set to the opened file descriptor and
-** SQLITE_OK is returned. If an error occurs, either SQLITE_NOMEM
-** or SQLITE_CANTOPEN is returned and *pFd is set to an undefined
-** value.
-**
-** The directory file descriptor is used for only one thing - to
-** fsync() a directory to make sure file creation and deletion events
-** are flushed to disk.  Such fsyncs are not needed on newer
-** journaling filesystems, but are required on older filesystems.
-**
-** This routine can be overridden using the xSetSysCall interface.
-** The ability to override this routine was added in support of the
-** chromium sandbox.  Opening a directory is a security risk (we are
-** told) so making it overrideable allows the chromium sandbox to
-** replace this routine with a harmless no-op.  To make this routine
-** a no-op, replace it with a stub that returns SQLITE_OK but leaves
-** *pFd set to a negative number.
-**
-** If SQLITE_OK is returned, the caller is responsible for closing
-** the file descriptor *pFd using close().
-*/
-static int openDirectory(const char *zFilename, int *pFd);
-
-/*
-** Many system calls are accessed through pointer-to-functions so that
-** they may be overridden at runtime to facilitate fault injection during
-** testing and sandboxing.  The following array holds the names and pointers
-** to all overrideable system calls.
-*/
-static struct rtthread_syscall {
-  const char *zName;            /* Name of the system call */
-  sqlite3_syscall_ptr pCurrent; /* Current value of the system call */
-  sqlite3_syscall_ptr pDefault; /* Default value */
-} aSyscall[] = {
-  {"sleep",         (sqlite3_syscall_ptr)rt_thread_delay,   0},
-#define osSleep     ((rt_err_t(*)(rt_tick_t))aSyscall[0].pCurrent)
-
-  { "open",         (sqlite3_syscall_ptr)open,  0  },
-#define osOpen      ((int(*)(const char*,int,int))aSyscall[1].pCurrent)
-
-  { "close",        (sqlite3_syscall_ptr)close,      0  },
-#define osClose     ((int(*)(int))aSyscall[2].pCurrent)
-
-  { "getcwd",       (sqlite3_syscall_ptr)getcwd,     0  },
-#define osGetcwd    ((char*(*)(char*,size_t))aSyscall[3].pCurrent)
-
-  { "stat",         (sqlite3_syscall_ptr)stat,       0  },
-#define osStat      ((int(*)(const char*,struct stat*))aSyscall[4].pCurrent)
-
-  { "fstat",        (sqlite3_syscall_ptr)fstat,      0  },
-#define osFstat     ((int(*)(int,struct stat*))aSyscall[5].pCurrent)
-
-  { "read",         (sqlite3_syscall_ptr)read,       0  },
-#define osRead      ((int(*)(int,void*,size_t))aSyscall[6].pCurrent)
-
-  { "write",        (sqlite3_syscall_ptr)write,      0  },
-#define osWrite     ((int(*)(int,const void*,size_t))aSyscall[7].pCurrent)
-
-  { "unlink",       (sqlite3_syscall_ptr)unlink,           0 },
-#define osUnlink    ((int(*)(const char*))aSyscall[8].pCurrent)
-
-  { "openDirectory",    (sqlite3_syscall_ptr)openDirectory,      0 },
-#define osOpenDirectory ((int(*)(const char*,int*))aSyscall[9].pCurrent)
-
-  { "mkdir",        (sqlite3_syscall_ptr)mkdir,           0 },
-#define osMkdir     ((int(*)(const char*,mode_t))aSyscall[10].pCurrent)
-
-  { "rmdir",        (sqlite3_syscall_ptr)rmdir,           0 },
-#define osRmdir     ((int(*)(const char*))aSyscall[11].pCurrent)
-
-  {"access",        (sqlite3_syscall_ptr)_Access,          0 },
-#define osAccess    ((int(*)(const char*, int))aSyscall[12].pCurrent)
-}; /* End of the overrideable system calls */
-
-/*
-**
-** This function - unixLogError_x(), is only ever called via the macro
-** unixLogError().
-**
-** It is invoked after an error occurs in an OS function and errno has been
-** set. It logs a message using sqlite3_log() containing the current value of
-** errno and, if possible, the human-readable equivalent from strerror() or
-** strerror_r().
-**
-** The first argument passed to the macro should be the error code that
-** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN).
-** The two subsequent arguments should be the name of the OS function that
-** failed (e.g. "unlink", "open") and the associated file-system path,
-** if any.
-*/
-#define rtthreadLogError(a,b,c)     rtthreadLogErrorAtLine(a,b,c,__LINE__)
-static int rtthreadLogErrorAtLine(
-  int errcode,                    /* SQLite error code */
-  const char *zFunc,              /* Name of OS function that failed */
-  const char *zPath,              /* File path associated with error */
-  int iLine                       /* Source line number where error occurred */
-){
-  char *zErr;                     /* Message from strerror() or equivalent */
-  int iErrno = errno;             /* Saved syscall error number */
-
-  /* If this is not a threadsafe build (SQLITE_THREADSAFE==0), then use
-  ** the strerror() function to obtain the human-readable error message
-  ** equivalent to errno. Otherwise, use strerror_r().
-  */
-#if SQLITE_THREADSAFE && defined(HAVE_STRERROR_R)
-  char aErr[80];
-  memset(aErr, 0, sizeof(aErr));
-  zErr = aErr;
-
-  /* If STRERROR_R_CHAR_P (set by autoconf scripts) or __USE_GNU is defined,
-  ** assume that the system provides the GNU version of strerror_r() that
-  ** returns a pointer to a buffer containing the error message. That pointer
-  ** may point to aErr[], or it may point to some static storage somewhere.
-  ** Otherwise, assume that the system provides the POSIX version of
-  ** strerror_r(), which always writes an error message into aErr[].
-  **
-  ** If the code incorrectly assumes that it is the POSIX version that is
-  ** available, the error message will often be an empty string. Not a
-  ** huge problem. Incorrectly concluding that the GNU version is available
-  ** could lead to a segfault though.
-  */
-#if defined(STRERROR_R_CHAR_P) || defined(__USE_GNU)
-  zErr =
-# endif
-  strerror_r(iErrno, aErr, sizeof(aErr)-1);
-
-#elif SQLITE_THREADSAFE
-  /* This is a threadsafe build, but strerror_r() is not available. */
-  zErr = "";
-#else
-  /* Non-threadsafe build, use strerror(). */
-  zErr = strerror(iErrno);
-#endif
-
-  if( zPath==0 ) zPath = "";
-  sqlite3_log(errcode,
-      "os_rtthread.c:%d: (%d) %s(%s) - %s",
-      iLine, iErrno, zFunc, zPath, zErr
-  );
-
-  return errcode;
-}
-
-
-/*
-** Do not accept any file descriptor less than this value, in order to avoid
-** opening database file using file descriptors that are commonly used for
-** standard input, output, and error.
-*/
-#ifndef SQLITE_MINIMUM_FILE_DESCRIPTOR
-# define SQLITE_MINIMUM_FILE_DESCRIPTOR 3
-#endif
-
-/*
-** Invoke open().  Do so multiple times, until it either succeeds or
-** fails for some reason other than EINTR.
-**
-** If the file creation mode "m" is 0 then set it to the default for
-** SQLite.  The default is SQLITE_DEFAULT_FILE_PERMISSIONS (normally
-** 0644) as modified by the system umask.  If m is not 0, then
-** make the file creation mode be exactly m ignoring the umask.
-**
-** The m parameter will be non-zero only when creating -wal, -journal,
-** and -shm files.  We want those files to have *exactly* the same
-** permissions as their original database, unadulterated by the umask.
-** In that way, if a database file is -rw-rw-rw or -rw-rw-r-, and a
-** transaction crashes and leaves behind hot journals, then any
-** process that is able to write to the database will also be able to
-** recover the hot journals.
-*/
-static int robust_open(const char *z, int f, mode_t m){
-  int fd;
-  mode_t m2 = m ;
-  while(1){
-#if defined(O_CLOEXEC)
-    fd = osOpen(z,f|O_CLOEXEC,m2);
-#else
-    fd = osOpen(z,f,m2);
-#endif
-    if( fd<0 ){
-      if( errno==EINTR ) continue;
-      break;
-    }
-    if( fd>=SQLITE_MINIMUM_FILE_DESCRIPTOR ) break;
-    osClose(fd);
-    sqlite3_log(SQLITE_WARNING,
-                "attempt to open \"%s\" as file descriptor %d", z, fd);
-    fd = -1;
-    if( osOpen("/000111sql.test111000", f, m)<0 ) break;
-  }
-
-  return fd;
-}
-
-/*
-** Open a file descriptor to the directory containing file zFilename.
-** If successful, *pFd is set to the opened file descriptor and
-** SQLITE_OK is returned. If an error occurs, either SQLITE_NOMEM
-** or SQLITE_CANTOPEN is returned and *pFd is set to an undefined
-** value.
-**
-** The directory file descriptor is used for only one thing - to
-** fsync() a directory to make sure file creation and deletion events
-** are flushed to disk.  Such fsyncs are not needed on newer
-** journaling filesystems, but are required on older filesystems.
-**
-** This routine can be overridden using the xSetSysCall interface.
-** The ability to override this routine was added in support of the
-** chromium sandbox.  Opening a directory is a security risk (we are
-** told) so making it overrideable allows the chromium sandbox to
-** replace this routine with a harmless no-op.  To make this routine
-** a no-op, replace it with a stub that returns SQLITE_OK but leaves
-** *pFd set to a negative number.
-**
-** If SQLITE_OK is returned, the caller is responsible for closing
-** the file descriptor *pFd using close().
-*/
-static int openDirectory(const char *zFilename, int *pFd){
-  int ii;
-  int fd = -1;
-  char zDirname[MAX_PATHNAME+1];
-
-  sqlite3_snprintf(MAX_PATHNAME, zDirname, "%s", zFilename);
-  for(ii=(int)strlen(zDirname); ii>1 && zDirname[ii]!='/'; ii--);
-  if( ii>0 ){
-    zDirname[ii] = '\0';
-    fd = robust_open(zDirname, O_RDONLY|O_BINARY, 0);
-    if( fd>=0 ){
-      OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
-    }
-  }
-  *pFd = fd;
-  return (fd>=0?SQLITE_OK:rtthreadLogError(SQLITE_CANTOPEN_BKPT, "open", zDirname));
-}
-
-
-
-/*
-** This is the xSetSystemCall() method of sqlite3_vfs for all of the
-** "win32" VFSes.  Return SQLITE_OK opon successfully updating the
-** system call pointer, or SQLITE_NOTFOUND if there is no configurable
-** system call named zName.
-*/
-static int rtthreadSetSystemCall(
-  sqlite3_vfs *pNotUsed,        /* The VFS pointer.  Not used */
-  const char *zName,            /* Name of system call to override */
-  sqlite3_syscall_ptr pNewFunc  /* Pointer to new system call value */
-){
-  unsigned int i;
-  int rc = SQLITE_NOTFOUND;
-
-  UNUSED_PARAMETER(pNotUsed);
-  if( zName==0 ){
-    /* If no zName is given, restore all system calls to their default
-    ** settings and return NULL
-    */
-    rc = SQLITE_OK;
-    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
-      if( aSyscall[i].pDefault ){
-        aSyscall[i].pCurrent = aSyscall[i].pDefault;
-      }
-    }
-  }else{
-    /* If zName is specified, operate on only the one system call
-    ** specified.
-    */
-    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
-      if( strcmp(zName, aSyscall[i].zName)==0 ){
-        if( aSyscall[i].pDefault==0 ){
-          aSyscall[i].pDefault = aSyscall[i].pCurrent;
-        }
-        rc = SQLITE_OK;
-        if( pNewFunc==0 ) pNewFunc = aSyscall[i].pDefault;
-        aSyscall[i].pCurrent = pNewFunc;
-        break;
-      }
-    }
-  }
-  return rc;
-}
-
-/*
-** Return the value of a system call.  Return NULL if zName is not a
-** recognized system call name.  NULL is also returned if the system call
-** is currently undefined.
-*/
-static sqlite3_syscall_ptr rtthreadGetSystemCall(
-  sqlite3_vfs *pNotUsed,
-  const char *zName
-){
-  unsigned int i;
-
-  UNUSED_PARAMETER(pNotUsed);
-  for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
-    if( strcmp(zName, aSyscall[i].zName)==0 ) return aSyscall[i].pCurrent;
-  }
-  return 0;
-}
-
-/*
-** Return the name of the first system call after zName.  If zName==NULL
-** then return the name of the first system call.  Return NULL if zName
-** is the last system call or if zName is not the name of a valid
-** system call.
-*/
-static const char* rtthreadNextSystemCall(sqlite3_vfs *p, const char *zName){
-  int i = -1;
-
-  UNUSED_PARAMETER(p);
-  if( zName ){
-    for(i=0; i<ArraySize(aSyscall)-1; i++){
-      if( strcmp(zName, aSyscall[i].zName)==0 ) break;
-    }
-  }
-  for(i++; i<ArraySize(aSyscall); i++){
-    if( aSyscall[i].pCurrent!=0 ) return aSyscall[i].zName;
-  }
-  return 0;
-}
-
-/*
-** The following routine suspends the current thread for at least ms
-** milliseconds.  This is equivalent to the Win32 Sleep() interface.
-*/
-void sqlite3_rtthread_sleep(int milliseconds){
-    rt_tick_t sleep_tick;
-
-    if (milliseconds <= 0)
-        return;
-
-    sleep_tick = rt_tick_from_millisecond(milliseconds);
-
-    osSleep(sleep_tick);
-}
-
-/*
-** Helper functions to obtain and relinquish the global mutex. The
-** global mutex is used to protect the unixInodeInfo and
-** vxworksFileId objects used by this file, all of which may be
-** shared by multiple threads.
-**
-** Function unixMutexHeld() is used to assert() that the global mutex
-** is held when required. This function is only used as part of assert()
-** statements. e.g.
-**
-**   unixEnterMutex()
-**     assert( unixMutexHeld() );
-**   unixEnterLeave()
-*/
-static void rtthreadEnterMutex(void){
-  sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
-}
-static void rtthreadLeaveMutex(void){
-  sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
-}
-#ifdef SQLITE_DEBUG
-static int rtthreadMutexHeld(void) {
-  return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
-}
-#endif
-
-
-#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
-/*
-** Helper function for printing out trace information from debugging
-** binaries. This returns the string represetation of the supplied
-** integer lock-type.
-*/
-static const char *azFileLock(int eFileLock){
-  switch( eFileLock ){
-    case NO_LOCK: return "NONE";
-    case SHARED_LOCK: return "SHARED";
-    case RESERVED_LOCK: return "RESERVED";
-    case PENDING_LOCK: return "PENDING";
-    case EXCLUSIVE_LOCK: return "EXCLUSIVE";
-  }
-  return "ERROR";
-}
-#endif
-
-/*
-** This routine translates a standard POSIX errno code into something
-** useful to the clients of the sqlite3 functions.  Specifically, it is
-** intended to translate a variety of "try again" errors into SQLITE_BUSY
-** and a variety of "please close the file descriptor NOW" errors into
-** SQLITE_IOERR
-**
-** Errors during initialization of locks, or file system support for locks,
-** should handle ENOLCK, ENOTSUP, EOPNOTSUPP separately.
-*/
-static int sqliteErrorFromPosixError(int posixError, int sqliteIOErr) {
-  switch (posixError) {
-#if 0
-  /* At one point this code was not commented out. In theory, this branch
-  ** should never be hit, as this function should only be called after
-  ** a locking-related function (i.e. fcntl()) has returned non-zero with
-  ** the value of errno as the first argument. Since a system call has failed,
-  ** errno should be non-zero.
-  **
-  ** Despite this, if errno really is zero, we still don't want to return
-  ** SQLITE_OK. The system call failed, and *some* SQLite error should be
-  ** propagated back to the caller. Commenting this branch out means errno==0
-  ** will be handled by the "default:" case below.
-  */
-  case 0:
-    return SQLITE_OK;
-#endif
-
-  case DFS_STATUS_EAGAIN:
-  case ETIMEDOUT:
-  case DFS_STATUS_EBUSY:
-  case EINTR:
-  case ENOLCK:
-    /* random NFS retry error, unless during file system support
-     * introspection, in which it actually means what it says */
-    return SQLITE_BUSY;
-
-  case EACCES:
-    /* EACCES is like EAGAIN during locking operations, but not any other time*/
-    if( (sqliteIOErr == SQLITE_IOERR_LOCK) ||
-        (sqliteIOErr == SQLITE_IOERR_UNLOCK) ||
-        (sqliteIOErr == SQLITE_IOERR_RDLOCK) ||
-        (sqliteIOErr == SQLITE_IOERR_CHECKRESERVEDLOCK) ){
-      return SQLITE_BUSY;
-    }
-    /* else fall through */
-  case EPERM:
-    return SQLITE_PERM;
-
-  /* EDEADLK is only possible if a call to fcntl(F_SETLKW) is made. And
-  ** this module never makes such a call. And the code in SQLite itself
-  ** asserts that SQLITE_IOERR_BLOCKED is never returned. For these reasons
-  ** this case is also commented out. If the system does set errno to EDEADLK,
-  ** the default SQLITE_IOERR_XXX code will be returned. */
-#if 0
-  case EDEADLK:
-    return SQLITE_IOERR_BLOCKED;
-#endif
-
-#if EOPNOTSUPP!=ENOTSUP
-  case EOPNOTSUPP:
-    /* something went terribly awry, unless during file system support
-     * introspection, in which it actually means what it says */
-#endif
-#ifdef ENOTSUP
-  case ENOTSUP:
-    /* invalid fd, unless during file system support introspection, in which
-     * it actually means what it says */
-#endif
-  case DFS_STATUS_EIO:
-  case DFS_STATUS_EBADF:
-  case DFS_STATUS_EINVAL:
-  case ENOTCONN:
-  case DFS_STATUS_ENODEV:
-  case DFS_STATUS_ENXIO:
-  case DFS_STATUS_ENOENT:
-#ifdef ESTALE                     /* ESTALE is not defined on Interix systems */
-  case ESTALE:
-#endif
-  case DFS_STATUS_ENOSYS:
-    /* these should force the client to close the file and reconnect */
-
-  default:
-    return sqliteIOErr;
-  }
-}
-
-static int robust_ftruncate(int h, sqlite3_int64 sz){
-  int rc;
-  rc = -1;
-  return rc;
-}
-
-/*
-** Close a file descriptor.
-**
-** We assume that close() almost always works, since it is only in a
-** very sick application or on a very sick platform that it might fail.
-** If it does fail, simply leak the file descriptor, but do log the
-** error.
-**
-** Note that it is not safe to retry close() after EINTR since the
-** file descriptor might have already been reused by another thread.
-** So we don't even try to recover from an EINTR.  Just log the error
-** and move on.
-*/
-static void robust_close(rtthreadFile *pFile, int h, int lineno){
-  if( osClose(h) ){
-    rtthreadLogErrorAtLine(SQLITE_IOERR_CLOSE, "close",
-                       pFile ? pFile->zPath : 0, lineno);
-  }
-}
-
-/*
-** Check a rtthreadFile that is a database.  Verify the following:
-**
-** (1) There is exactly one hard link on the file
-** (2) The file is not a symbolic link
-** (3) The file has not been renamed or unlinked
-**
-** Issue sqlite3_log(SQLITE_WARNING,...) messages if anything is not right.
-*/
-static void verifyDbFile(rtthreadFile *pFile){
-  struct stat buf;
-  int rc;
-  if( pFile->ctrlFlags & UNIXFILE_WARNED ){
-    /* One or more of the following warnings have already been issued.  Do not
-    ** repeat them so as not to clutter the error log */
-    return;
-  }
-  rc = osFstat(pFile->h, &buf);
-  if( rc!=0 ){
-    sqlite3_log(SQLITE_WARNING, "cannot fstat db file %s", pFile->zPath);
-    pFile->ctrlFlags |= UNIXFILE_WARNED;
-    return;
-  }
-#warning " struct \"stat\" has no field \"st_nlink\""
-#ifndef RT_USING_SQLITE
-  if( buf.st_nlink==0 && (pFile->ctrlFlags & UNIXFILE_DELETE)==0 ){
-    sqlite3_log(SQLITE_WARNING, "file unlinked while open: %s", pFile->zPath);
-    pFile->ctrlFlags |= UNIXFILE_WARNED;
-    return;
-  }
-#endif
-}
-
-/*
-** This function performs the parts of the "close file" operation
-** common to all locking schemes. It closes the directory and file
-** handles, if they are valid, and sets all fields of the rtthreadFile
-** structure to 0.
-**
-** It is *not* necessary to hold the mutex when this routine is called,
-** even on VxWorks.  A mutex will be acquired on VxWorks by the
-** vxworksReleaseFileId() routine.
-*/
-static int closeRtthreadFile(sqlite3_file *id){
-  rtthreadFile *pFile = (rtthreadFile*)id;
-  if( pFile->h>=0 ){
-    robust_close(pFile, pFile->h, __LINE__);
-    pFile->h = -1;
-  }
-  OSTRACE(("CLOSE   %-3d\n", pFile->h));
-  OpenCounter(-1);
-  memset(pFile, 0, sizeof(rtthreadFile));
-  return SQLITE_OK;
-}
-
-/************** End of the posix advisory lock implementation *****************
-******************************************************************************/
-
-/******************************************************************************
-****************************** No-op Locking **********************************
-**
-** Of the various locking implementations available, this is by far the
-** simplest:  locking is ignored.  No attempt is made to lock the database
-** file for reading or writing.
-**
-** This locking mode is appropriate for use on read-only databases
-** (ex: databases that are burned into CD-ROM, for example.)  It can
-** also be used if the application employs some external mechanism to
-** prevent simultaneous access of the same database by two or more
-** database connections.  But there is a serious risk of database
-** corruption if this locking mode is used in situations where multiple
-** database connections are accessing the same database file at the same
-** time and one or more of those connections are writing.
-*/
-
-static int nolockCheckReservedLock(sqlite3_file *NotUsed, int *pResOut){
-  UNUSED_PARAMETER(NotUsed);
-  *pResOut = 0;
-  return SQLITE_OK;
-}
-static int nolockLock(sqlite3_file *NotUsed, int NotUsed2){
-  UNUSED_PARAMETER2(NotUsed, NotUsed2);
-  return SQLITE_OK;
-}
-static int nolockUnlock(sqlite3_file *NotUsed, int NotUsed2){
-  UNUSED_PARAMETER2(NotUsed, NotUsed2);
-  return SQLITE_OK;
-}
-
-/*
-** Close the file.
-*/
-static int nolockClose(sqlite3_file *id) {
-  return closeRtthreadFile(id);
-}
-
-/******************* End of the no-op lock implementation *********************
-******************************************************************************/
-
-/******************************************************************************
-************************* Begin dot-file Locking ******************************
-**
-** The dotfile locking implementation uses the existence of separate lock
-** files (really a directory) to control access to the database.  This works
-** on just about every filesystem imaginable.  But there are serious downsides:
-**
-**    (1)  There is zero concurrency.  A single reader blocks all other
-**         connections from reading or writing the database.
-**
-**    (2)  An application crash or power loss can leave stale lock files
-**         sitting around that need to be cleared manually.
-**
-** Nevertheless, a dotlock is an appropriate locking mode for use if no
-** other locking strategy is available.
-**
-** Dotfile locking works by creating a subdirectory in the same directory as
-** the database and with the same name but with a ".lock" extension added.
-** The existence of a lock directory implies an EXCLUSIVE lock.  All other
-** lock types (SHARED, RESERVED, PENDING) are mapped into EXCLUSIVE.
-*/
-
-/*
-** The file suffix added to the data base filename in order to create the
-** lock directory.
-*/
-#define DOTLOCK_SUFFIX ".lock"
-
-/*
-** Only set the lastErrno if the error code is a real error and not
-** a normal expected return code of SQLITE_BUSY or SQLITE_OK
-*/
-#define IS_LOCK_ERROR(x)  (((x) != SQLITE_OK) && ((x) != SQLITE_BUSY))
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero.  The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-**
-** In dotfile locking, either a lock exists or it does not.  So in this
-** variation of CheckReservedLock(), *pResOut is set to true if any lock
-** is held on the file and false if the file is unlocked.
-*/
-static int dotlockCheckReservedLock(sqlite3_file *id, int *pResOut) {
-  int rc = SQLITE_OK;
-  int reserved = 0;
-  rtthreadFile *pFile = (rtthreadFile*)id;
-
-  SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
-  assert( pFile );
-
-  /* Check if a thread in this process holds such a lock */
-  if( pFile->eFileLock>SHARED_LOCK ){
-    /* Either this connection or some other connection in the same process
-    ** holds a lock on the file.  No need to check further. */
-    reserved = 1;
-  }else{
-    /* The lock is held if and only if the lockfile exists */
-    const char *zLockFile = (const char*)pFile->lockingContext;
-    reserved = 0;
-  }
-  OSTRACE(("TEST WR-LOCK %d %d %d (dotlock)\n", pFile->h, rc, reserved));
-  *pResOut = reserved;
-  return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-**     (1) SHARED_LOCK
-**     (2) RESERVED_LOCK
-**     (3) PENDING_LOCK
-**     (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between.  The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal.  The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-**    UNLOCKED -> SHARED
-**    SHARED -> RESERVED
-**    SHARED -> (PENDING) -> EXCLUSIVE
-**    RESERVED -> (PENDING) -> EXCLUSIVE
-**    PENDING -> EXCLUSIVE
-**
-** This routine will only increase a lock.  Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-**
-** With dotfile locking, we really only support state (4): EXCLUSIVE.
-** But we track the other locking levels internally.
-*/
-static int dotlockLock(sqlite3_file *id, int eFileLock) {
-  rtthreadFile *pFile = (rtthreadFile*)id;
-  char *zLockFile = (char *)pFile->lockingContext;
-  int rc = SQLITE_OK;
-
-
-  /* If we have any lock, then the lock file already exists.  All we have
-  ** to do is adjust our internal record of the lock level.
-  */
-  if( pFile->eFileLock > NO_LOCK ){
-    pFile->eFileLock = eFileLock;
-    return SQLITE_OK;
-  }
-
-  /* grab an exclusive lock */
-  rc = osMkdir(zLockFile, 0777);
-  if( rc<0 ){
-    /* failed to open/create the lock directory */
-    int tErrno = errno;
-    if( DFS_STATUS_EEXIST == tErrno ){
-      rc = SQLITE_BUSY;
-    } else {
-      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
-      if( IS_LOCK_ERROR(rc) ){
-        pFile->lastErrno = tErrno;
-      }
-    }
-    return rc;
-  }
-
-  /* got it, set the type and return ok */
-  pFile->eFileLock = eFileLock;
-  return rc;
-}
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-**
-** When the locking level reaches NO_LOCK, delete the lock file.
-*/
-static int dotlockUnlock(sqlite3_file *id, int eFileLock) {
-  rtthreadFile *pFile = (rtthreadFile*)id;
-  char *zLockFile = (char *)pFile->lockingContext;
-  int rc;
-
-  assert( pFile );
-  OSTRACE(("UNLOCK  %d %d was %d tnm=%s (dotlock)\n", pFile->h, eFileLock,
-           pFile->eFileLock, rt_thread_self()->name ));
-  assert( eFileLock<=SHARED_LOCK );
-
-  /* no-op if possible */
-  if( pFile->eFileLock==eFileLock ){
-    return SQLITE_OK;
-  }
-
-  /* To downgrade to shared, simply update our internal notion of the
-  ** lock state.  No need to mess with the file on disk.
-  */
-  if( eFileLock==SHARED_LOCK ){
-    pFile->eFileLock = SHARED_LOCK;
-    return SQLITE_OK;
-  }
-
-  /* To fully unlock the database, delete the lock file */
-  assert( eFileLock==NO_LOCK );
-  rc = osRmdir(zLockFile);
-  if( rc<0 && errno==DFS_STATUS_ENOTDIR ) rc = osUnlink(zLockFile);
-  if( rc<0 ){
-    int tErrno = errno;
-    rc = 0;
-    if( DFS_STATUS_ENOENT != tErrno ){
-      rc = SQLITE_IOERR_UNLOCK;
-    }
-    if( IS_LOCK_ERROR(rc) ){
-      pFile->lastErrno = tErrno;
-    }
-    return rc;
-  }
-  pFile->eFileLock = NO_LOCK;
-  return SQLITE_OK;
-}
-
-/*
-** Close a file.  Make sure the lock has been released before closing.
-*/
-static int dotlockClose(sqlite3_file *id) {
-  int rc = SQLITE_OK;
-  if( id ){
-    rtthreadFile *pFile = (rtthreadFile*)id;
-    dotlockUnlock(id, NO_LOCK);
-    sqlite3_free(pFile->lockingContext);
-    rc = closeRtthreadFile(id);
-  }
-  return rc;
-}
-/****************** End of the dot-file lock implementation *******************
-******************************************************************************/
-
-/******************************************************************************
-************************** Begin flock Locking ********************************
-**
-** Use the flock() system call to do file locking.
-**
-** flock() locking is like dot-file locking in that the various
-** fine-grain locking levels supported by SQLite are collapsed into
-** a single exclusive lock.  In other words, SHARED, RESERVED, and
-** PENDING locks are the same thing as an EXCLUSIVE lock.  SQLite
-** still works when you do this, but concurrency is reduced since
-** only a single process can be reading the database at a time.
-**
-** Omit this section if SQLITE_ENABLE_LOCKING_STYLE is turned off or if
-** compiling for VXWORKS.
-*/
-#if SQLITE_ENABLE_LOCKING_STYLE
-#warning "rtthread file lock not available"
-/*
-** Retry flock() calls that fail with EINTR
-*/
-static int robust_flock(int fd, int op){
-  int rc = 0;
-
-  return rc;
-}
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero.  The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-*/
-static int flockCheckReservedLock(sqlite3_file *id, int *pResOut){
-  int rc = SQLITE_OK;
-  int reserved = 0;
-  rtthreadFile *pFile = (rtthreadFile*)id;
-
-  SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
-  assert( pFile );
-
-  /* Check if a thread in this process holds such a lock */
-  if( pFile->eFileLock>SHARED_LOCK ){
-    reserved = 1;
-  }
-
-  /* Otherwise see if some other process holds it. */
-  if( !reserved ){
-    /* attempt to get the lock */
-    int lrc = robust_flock(pFile->h, LOCK_EX | LOCK_NB);
-    if( !lrc ){
-      /* got the lock, unlock it */
-      lrc = robust_flock(pFile->h, LOCK_UN);
-      if ( lrc ) {
-        int tErrno = errno;
-        /* unlock failed with an error */
-        lrc = SQLITE_IOERR_UNLOCK;
-        if( IS_LOCK_ERROR(lrc) ){
-          pFile->lastErrno = tErrno;
-          rc = lrc;
-        }
-      }
-    } else {
-      int tErrno = errno;
-      reserved = 1;
-      /* someone else might have it reserved */
-      lrc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
-      if( IS_LOCK_ERROR(lrc) ){
-        pFile->lastErrno = tErrno;
-        rc = lrc;
-      }
-    }
-  }
-  OSTRACE(("TEST WR-LOCK %d %d %d (flock)\n", pFile->h, rc, reserved));
-
-#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
-  if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
-    rc = SQLITE_OK;
-    reserved=1;
-  }
-#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
-  *pResOut = reserved;
-  return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-**     (1) SHARED_LOCK
-**     (2) RESERVED_LOCK
-**     (3) PENDING_LOCK
-**     (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between.  The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal.  The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-**    UNLOCKED -> SHARED
-**    SHARED -> RESERVED
-**    SHARED -> (PENDING) -> EXCLUSIVE
-**    RESERVED -> (PENDING) -> EXCLUSIVE
-**    PENDING -> EXCLUSIVE
-**
-** flock() only really support EXCLUSIVE locks.  We track intermediate
-** lock states in the sqlite3_file structure, but all locks SHARED or
-** above are really EXCLUSIVE locks and exclude all other processes from
-** access the file.
-**
-** This routine will only increase a lock.  Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-*/
-static int flockLock(sqlite3_file *id, int eFileLock) {
-  int rc = SQLITE_OK;
-  rtthreadFile *pFile = (rtthreadFile*)id;
-
-  assert( pFile );
-
-  /* if we already have a lock, it is exclusive.
-  ** Just adjust level and punt on outta here. */
-  if (pFile->eFileLock > NO_LOCK) {
-    pFile->eFileLock = eFileLock;
-    return SQLITE_OK;
-  }
-
-  /* grab an exclusive lock */
-
-  if (robust_flock(pFile->h, LOCK_EX | LOCK_NB)) {
-    int tErrno = errno;
-    /* didn't get, must be busy */
-    rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
-    if( IS_LOCK_ERROR(rc) ){
-      pFile->lastErrno = tErrno;
-    }
-  } else {
-    /* got it, set the type and return ok */
-    pFile->eFileLock = eFileLock;
-  }
-  OSTRACE(("LOCK    %d %s %s (flock)\n", pFile->h, azFileLock(eFileLock),
-           rc==SQLITE_OK ? "ok" : "failed"));
-#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
-  if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
-    rc = SQLITE_BUSY;
-  }
-#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
-  return rc;
-}
-
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-*/
-static int flockUnlock(sqlite3_file *id, int eFileLock) {
-  rtthreadFile *pFile = (rtthreadFile*)id;
-
-  assert( pFile );
-  OSTRACE(("UNLOCK  %d %d was %d tnm=%s (flock)\n", pFile->h, eFileLock,
-           pFile->eFileLock, rt_thread_self()->name));
-  assert( eFileLock<=SHARED_LOCK );
-
-  /* no-op if possible */
-  if( pFile->eFileLock==eFileLock ){
-    return SQLITE_OK;
-  }
-
-  /* shared can just be set because we always have an exclusive */
-  if (eFileLock==SHARED_LOCK) {
-    pFile->eFileLock = eFileLock;
-    return SQLITE_OK;
-  }
-
-  /* no, really, unlock. */
-  if( robust_flock(pFile->h, LOCK_UN) ){
-#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
-    return SQLITE_OK;
-#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
-    return SQLITE_IOERR_UNLOCK;
-  }else{
-    pFile->eFileLock = NO_LOCK;
-    return SQLITE_OK;
-  }
-}
-
-/*
-** Close a file.
-*/
-static int flockClose(sqlite3_file *id) {
-  int rc = SQLITE_OK;
-  if( id ){
-    flockUnlock(id, NO_LOCK);
-    rc = closeRtthreadFile(id);
-  }
-  return rc;
-}
-
-#endif /* SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORK */
-
-/******************* End of the flock lock implementation *********************
-******************************************************************************/
-
-/******************************************************************************
-**************** Non-locking sqlite3_file methods *****************************
-**
-** The next division contains implementations for all methods of the
-** sqlite3_file object other than the locking methods.  The locking
-** methods were defined in divisions above (one locking method per
-** division).  Those methods that are common to all locking modes
-** are gather together into this division.
-*/
-
-/*
-** Seek to the offset passed as the second argument, then read cnt
-** bytes into pBuf. Return the number of bytes actually read.
-**
-** NB:  If you define USE_PREAD or USE_PREAD64, then it might also
-** be necessary to define _XOPEN_SOURCE to be 500.  This varies from
-** one system to another.  Since SQLite does not define USE_PREAD
-** any any form by default, we will not attempt to define _XOPEN_SOURCE.
-** See tickets #2741 and #2681.
-**
-** To avoid stomping the errno value on a failed read the lastErrno value
-** is set before returning.
-*/
-static int seekAndRead(rtthreadFile *id, sqlite3_int64 offset, void *pBuf, int cnt){
-  int got;
-  int prior = 0;
-#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
-  i64 newOffset;
-#endif
-  TIMER_START;
-  assert( cnt==(cnt&0x1ffff) );
-  assert( id->h>2 );
-  cnt &= 0x1ffff;
-  do{
-#if defined(USE_PREAD)
-    #error "rtthread pread not support"
-    got = osPread(id->h, pBuf, cnt, offset);
-    SimulateIOError( got = -1 );
-#elif defined(USE_PREAD64)
-    #error "rtthread pread64 not support"
-    got = osPread64(id->h, pBuf, cnt, offset);
-    SimulateIOError( got = -1 );
-#else
-    newOffset = lseek(id->h, offset, SEEK_SET);
-    SimulateIOError( newOffset-- );
-    if( newOffset!=offset ){
-      if( newOffset == -1 ){
-        ((rtthreadFile*)id)->lastErrno = errno;
-      }else{
-        ((rtthreadFile*)id)->lastErrno = 0;
-      }
-      return -1;
-    }
-    got = osRead(id->h, pBuf, cnt);
-#endif
-    if( got==cnt ) break;
-    if( got<0 ){
-      if( errno==EINTR ){ got = 1; continue; }
-      prior = 0;
-      ((rtthreadFile*)id)->lastErrno = errno;
-      break;
-    }else if( got>0 ){
-      cnt -= got;
-      offset += got;
-      prior += got;
-      pBuf = (void*)(got + (char*)pBuf);
-    }
-  }while( got>0 );
-  TIMER_END;
-  OSTRACE(("READ    %-3d %5d %7lld %llu\n",
-            id->h, got+prior, offset-prior, TIMER_ELAPSED));
-  return got+prior;
-}
-
-/*
-** Read data from a file into a buffer.  Return SQLITE_OK if all
-** bytes were read successfully and SQLITE_IOERR if anything goes
-** wrong.
-*/
-static int rtthreadRead(
-  sqlite3_file *id,
-  void *pBuf,
-  int amt,
-  sqlite3_int64 offset
-){
-  rtthreadFile *pFile = (rtthreadFile *)id;
-  int got;
-  assert( id );
-  assert( offset>=0 );
-  assert( amt>0 );
-
-  got = seekAndRead(pFile, offset, pBuf, amt);
-  if( got==amt ){
-    return SQLITE_OK;
-  }else if( got<0 ){
-    /* lastErrno set by seekAndRead */
-    return SQLITE_IOERR_READ;
-  }else{
-    pFile->lastErrno = 0; /* not a system error */
-    /* Unread parts of the buffer must be zero-filled */
-    memset(&((char*)pBuf)[got], 0, amt-got);
-    return SQLITE_IOERR_SHORT_READ;
-  }
-}
-
-/*
-** Attempt to seek the file-descriptor passed as the first argument to
-** absolute offset iOff, then attempt to write nBuf bytes of data from
-** pBuf to it. If an error occurs, return -1 and set *piErrno. Otherwise,
-** return the actual number of bytes written (which may be less than
-** nBuf).
-*/
-static int seekAndWriteFd(
-  int fd,                         /* File descriptor to write to */
-  i64 iOff,                       /* File offset to begin writing at */
-  const void *pBuf,               /* Copy data from this buffer to the file */
-  int nBuf,                       /* Size of buffer pBuf in bytes */
-  int *piErrno                    /* OUT: Error number if error occurs */
-){
-  int rc = 0;                     /* Value returned by system call */
-
-  assert( nBuf==(nBuf&0x1ffff) );
-  assert( fd>2 );
-  nBuf &= 0x1ffff;
-  TIMER_START;
-
-#if defined(USE_PREAD)
-  do{ rc = osPwrite(fd, pBuf, nBuf, iOff); }while( rc<0 && errno==EINTR );
-#elif defined(USE_PREAD64)
-  do{ rc = osPwrite64(fd, pBuf, nBuf, iOff);}while( rc<0 && errno==EINTR);
-#else
-  do{
-    i64 iSeek = lseek(fd, iOff, SEEK_SET);
-    SimulateIOError( iSeek-- );
-
-    if( iSeek!=iOff ){
-      if( piErrno ) *piErrno = (iSeek==-1 ? errno : 0);
-      return -1;
-    }
-    rc = osWrite(fd, pBuf, nBuf);
-  }while( rc<0 && errno==EINTR );
-#endif
-
-  TIMER_END;
-  OSTRACE(("WRITE   %-3d %5d %7lld %llu\n", fd, rc, iOff, TIMER_ELAPSED));
-
-  if( rc<0 && piErrno ) *piErrno = errno;
-  return rc;
-}
-
-
-/*
-** Seek to the offset in id->offset then read cnt bytes into pBuf.
-** Return the number of bytes actually read.  Update the offset.
-**
-** To avoid stomping the errno value on a failed write the lastErrno value
-** is set before returning.
-*/
-static int seekAndWrite(rtthreadFile *id, i64 offset, const void *pBuf, int cnt){
-  return seekAndWriteFd(id->h, offset, pBuf, cnt, &id->lastErrno);
-}
-
-
-/*
-** Write data from a buffer into a file.  Return SQLITE_OK on success
-** or some other error code on failure.
-*/
-static int rtthreadWrite(
-  sqlite3_file *id,
-  const void *pBuf,
-  int amt,
-  sqlite3_int64 offset
-){
-  rtthreadFile *pFile = (rtthreadFile*)id;
-  int wrote = 0;
-  assert( id );
-  assert( amt>0 );
-
-#ifdef SQLITE_DEBUG
-  /* If we are doing a normal write to a database file (as opposed to
-  ** doing a hot-journal rollback or a write to some file other than a
-  ** normal database file) then record the fact that the database
-  ** has changed.  If the transaction counter is modified, record that
-  ** fact too.
-  */
-  if( pFile->inNormalWrite ){
-    pFile->dbUpdate = 1;  /* The database has been modified */
-    if( offset<=24 && offset+amt>=27 ){
-      int rc;
-      char oldCntr[4];
-      SimulateIOErrorBenign(1);
-      rc = seekAndRead(pFile, 24, oldCntr, 4);
-      SimulateIOErrorBenign(0);
-      if( rc!=4 || memcmp(oldCntr, &((char*)pBuf)[24-offset], 4)!=0 ){
-        pFile->transCntrChng = 1;  /* The transaction counter has changed */
-      }
-    }
-  }
-#endif
-
-  while( amt>0 && (wrote = seekAndWrite(pFile, offset, pBuf, amt))>0 ){
-    amt -= wrote;
-    offset += wrote;
-    pBuf = &((char*)pBuf)[wrote];
-  }
-  SimulateIOError(( wrote=(-1), amt=1 ));
-  SimulateDiskfullError(( wrote=0, amt=1 ));
-
-  if( amt>0 ){
-    if( wrote<0 && pFile->lastErrno!=DFS_STATUS_ENOSPC ){
-      /* lastErrno set by seekAndWrite */
-      return SQLITE_IOERR_WRITE;
-    }else{
-      pFile->lastErrno = 0; /* not a system error */
-      return SQLITE_FULL;
-    }
-  }
-
-  return SQLITE_OK;
-}
-
-#ifdef SQLITE_TEST
-/*
-** Count the number of fullsyncs and normal syncs.  This is used to test
-** that syncs and fullsyncs are occurring at the right times.
-*/
-int sqlite3_sync_count = 0;
-int sqlite3_fullsync_count = 0;
-#endif
-
-/*
-** We do not trust systems to provide a working fdatasync().  Some do.
-** Others do no.  To be safe, we will stick with the (slightly slower)
-** fsync(). If you know that your system does support fdatasync() correctly,
-** then simply compile with -Dfdatasync=fdatasync
-*/
-#if !defined(fdatasync)
-#include "dfs.h"
-#include "dfs_file.h"
-int fdatasync(fd)
-{
-    struct dfs_fd *dfs_fd;
-    dfs_fd = fd_get(fd);
-    return dfs_file_flush(dfs_fd);
-}
-#endif
-
-/*
-** Define HAVE_FULLFSYNC to 0 or 1 depending on whether or not
-** the F_FULLFSYNC macro is defined.  F_FULLFSYNC is currently
-** only available on Mac OS X.  But that could change.
-*/
-#ifdef F_FULLFSYNC
-# define HAVE_FULLFSYNC 0
-#endif
-
-
-/*
-** The fsync() system call does not work as advertised on many
-** unix systems.  The following procedure is an attempt to make
-** it work better.
-**
-** The SQLITE_NO_SYNC macro disables all fsync()s.  This is useful
-** for testing when we want to run through the test suite quickly.
-** You are strongly advised *not* to deploy with SQLITE_NO_SYNC
-** enabled, however, since with SQLITE_NO_SYNC enabled, an OS crash
-** or power failure will likely corrupt the database file.
-**
-** SQLite sets the dataOnly flag if the size of the file is unchanged.
-** The idea behind dataOnly is that it should only write the file content
-** to disk, not the inode.  We only set dataOnly if the file size is
-** unchanged since the file size is part of the inode.  However,
-** Ted Ts'o tells us that fdatasync() will also write the inode if the
-** file size has changed.  The only real difference between fdatasync()
-** and fsync(), Ted tells us, is that fdatasync() will not flush the
-** inode if the mtime or owner or other inode attributes have changed.
-** We only care about the file size, not the other file attributes, so
-** as far as SQLite is concerned, an fdatasync() is always adequate.
-** So, we always use fdatasync() if it is available, regardless of
-** the value of the dataOnly flag.
-*/
-static int full_fsync(int fd, int fullSync, int dataOnly){
-  int rc;
-
-  /* The following "ifdef/elif/else/" block has the same structure as
-  ** the one below. It is replicated here solely to avoid cluttering
-  ** up the real code with the UNUSED_PARAMETER() macros.
-  */
-#ifdef SQLITE_NO_SYNC
-  UNUSED_PARAMETER(fd);
-  UNUSED_PARAMETER(fullSync);
-  UNUSED_PARAMETER(dataOnly);
-#elif HAVE_FULLFSYNC
-  UNUSED_PARAMETER(dataOnly);
-#else
-  UNUSED_PARAMETER(fullSync);
-  UNUSED_PARAMETER(dataOnly);
-#endif
-
-  /* Record the number of times that we do a normal fsync() and
-  ** FULLSYNC.  This is used during testing to verify that this procedure
-  ** gets called with the correct arguments.
-  */
-#ifdef SQLITE_TEST
-  if( fullSync ) sqlite3_fullsync_count++;
-  sqlite3_sync_count++;
-#endif
-
-  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
-  ** no-op
-  */
-#ifdef SQLITE_NO_SYNC
-  rc = SQLITE_OK;
-#elif HAVE_FULLFSYNC
-  #error "rtthread not support FULLFSYNC"
-#else
-  rc = fdatasync(fd);
-#endif /* ifdef SQLITE_NO_SYNC elif HAVE_FULLFSYNC */
-
-  return rc;
-}
-
-/*
-** Make sure all writes to a particular file are committed to disk.
-**
-** If dataOnly==0 then both the file itself and its metadata (file
-** size, access time, etc) are synced.  If dataOnly!=0 then only the
-** file data is synced.
-**
-** Under Rtthread, also make sure that the directory entry for the file
-** has been created by fsync-ing the directory that contains the file.
-** If we do not do this and we encounter a power failure, the directory
-** entry for the journal might not exist after we reboot.  The next
-** SQLite to access the file will not know that the journal exists (because
-** the directory entry for the journal was never created) and the transaction
-** will not roll back - possibly leading to database corruption.
-*/
-static int rtthreadSync(sqlite3_file *id, int flags){
-  int rc;
-  rtthreadFile *pFile = (rtthreadFile*)id;
-
-  int isDataOnly = (flags&SQLITE_SYNC_DATAONLY);
-  int isFullsync = (flags&0x0F)==SQLITE_SYNC_FULL;
-
-  /* Check that one of SQLITE_SYNC_NORMAL or FULL was passed */
-  assert((flags&0x0F)==SQLITE_SYNC_NORMAL
-      || (flags&0x0F)==SQLITE_SYNC_FULL
-  );
-
-  /* Rtthread cannot, but some systems may return SQLITE_FULL from here. This
-  ** line is to test that doing so does not cause any problems.
-  */
-  SimulateDiskfullError( return SQLITE_FULL );
-
-  assert( pFile );
-  OSTRACE(("SYNC    %-3d\n", pFile->h));
-  rc = full_fsync(pFile->h, isFullsync, isDataOnly);
-  SimulateIOError( rc=1 );
-  if( rc ){
-    pFile->lastErrno = errno;
-    return rtthreadLogError(SQLITE_IOERR_FSYNC, "full_fsync", pFile->zPath);
-  }
-
-  /* Also fsync the directory containing the file if the DIRSYNC flag
-  ** is set.  This is a one-time occurrence.  Many systems (examples: AIX)
-  ** are unable to fsync a directory, so ignore errors on the fsync.
-  */
-  if( pFile->ctrlFlags & UNIXFILE_DIRSYNC ){
-    int dirfd;
-    OSTRACE(("DIRSYNC %s (have_fullfsync=%d fullsync=%d)\n", pFile->zPath,
-            HAVE_FULLFSYNC, isFullsync));
-    rc = osOpenDirectory(pFile->zPath, &dirfd);
-    if( rc==SQLITE_OK && dirfd>=0 ){
-      full_fsync(dirfd, 0, 0);
-      robust_close(pFile, dirfd, __LINE__);
-    }else if( rc==SQLITE_CANTOPEN ){
-      rc = SQLITE_OK;
-    }
-    pFile->ctrlFlags &= ~UNIXFILE_DIRSYNC;
-  }
-  return rc;
-}
-
-/*
-** Truncate an open file to a specified size
-*/
-static int rtthreadTruncate(sqlite3_file *id, i64 nByte){
-  rtthreadFile *pFile = (rtthreadFile *)id;
-  int rc;
-  assert( pFile );
-  SimulateIOError( return SQLITE_IOERR_TRUNCATE );
-
-  /* If the user has configured a chunk-size for this file, truncate the
-  ** file so that it consists of an integer number of chunks (i.e. the
-  ** actual file size after the operation may be larger than the requested
-  ** size).
-  */
-  if( pFile->szChunk>0 ){
-    nByte = ((nByte + pFile->szChunk - 1)/pFile->szChunk) * pFile->szChunk;
-  }
-
-  rc = robust_ftruncate(pFile->h, (off_t)nByte);
-  if( rc ){
-    pFile->lastErrno = errno;
-    return rtthreadLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath);
-  }else{
-#ifdef SQLITE_DEBUG
-    /* If we are doing a normal write to a database file (as opposed to
-    ** doing a hot-journal rollback or a write to some file other than a
-    ** normal database file) and we truncate the file to zero length,
-    ** that effectively updates the change counter.  This might happen
-    ** when restoring a database using the backup API from a zero-length
-    ** source.
-    */
-    if( pFile->inNormalWrite && nByte==0 ){
-      pFile->transCntrChng = 1;
-    }
-#endif
-
-    return SQLITE_OK;
-  }
-}
-
-/*
-** Determine the current size of a file in bytes
-*/
-static int rtthreadFileSize(sqlite3_file *id, i64 *pSize){
-  int rc;
-  struct stat buf;
-  assert( id );
-  rc = osFstat(((rtthreadFile*)id)->h, &buf);
-  SimulateIOError( rc=1 );
-  if( rc!=0 ){
-    ((rtthreadFile*)id)->lastErrno = errno;
-    return SQLITE_IOERR_FSTAT;
-  }
-  *pSize = buf.st_size;
-
-  /* When opening a zero-size database, the findInodeInfo() procedure
-  ** writes a single byte into that file in order to work around a bug
-  ** in the OS-X msdos filesystem.  In order to avoid problems with upper
-  ** layers, we need to report this file size as zero even though it is
-  ** really 1.   Ticket #3260.
-  */
-  if( *pSize==1 ) *pSize = 0;
-
-
-  return SQLITE_OK;
-}
-
-/*
-** This function is called to handle the SQLITE_FCNTL_SIZE_HINT
-** file-control operation.  Enlarge the database to nBytes in size
-** (rounded up to the next chunk-size).  If the database is already
-** nBytes or larger, this routine is a no-op.
-*/
-static int fcntlSizeHint(rtthreadFile *pFile, i64 nByte){
-  if( pFile->szChunk>0 ){
-    i64 nSize;                    /* Required file size */
-    struct stat buf;              /* Used to hold return values of fstat() */
-
-    if( osFstat(pFile->h, &buf) ) return SQLITE_IOERR_FSTAT;
-
-    nSize = ((nByte+pFile->szChunk-1) / pFile->szChunk) * pFile->szChunk;
-    if( nSize>(i64)buf.st_size ){
-      /* If the OS does not have posix_fallocate(), fake it. First use
-      ** ftruncate() to set the file size, then write a single byte to
-      ** the last byte in each block within the extended region. This
-      ** is the same technique used by glibc to implement posix_fallocate()
-      ** on systems that do not have a real fallocate() system call.
-      */
-      int nBlk = 4096; // no blksize in RT-Thread, use 4096. /* File-system block size */
-      i64 iWrite;                 /* Next offset to write to */
-
-      if( robust_ftruncate(pFile->h, nSize) ){
-        pFile->lastErrno = errno;
-        return rtthreadLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath);
-      }
-      iWrite = ((buf.st_size + 2*nBlk - 1)/nBlk)*nBlk-1;
-      while( iWrite<nSize ){
-        int nWrite = seekAndWrite(pFile, iWrite, "", 1);
-        if( nWrite!=1 ) return SQLITE_IOERR_WRITE;
-        iWrite += nBlk;
-      }
-    }
-  }
-
-  return SQLITE_OK;
-}
-
-/*
-** If *pArg is inititially negative then this is a query.  Set *pArg to
-** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set.
-**
-** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags.
-*/
-static void rtthreadModeBit(rtthreadFile *pFile, unsigned char mask, int *pArg){
-  if( *pArg<0 ){
-    *pArg = (pFile->ctrlFlags & mask)!=0;
-  }else if( (*pArg)==0 ){
-    pFile->ctrlFlags &= ~mask;
-  }else{
-    pFile->ctrlFlags |= mask;
-  }
-}
-
-/* Forward declaration */
-static int rtthreadGetTempname(int nBuf, char *zBuf);
-
-/*
-** Information and control of an open file handle.
-*/
-static int rtthreadFileControl(sqlite3_file *id, int op, void *pArg){
-  rtthreadFile *pFile = (rtthreadFile*)id;
-  switch( op ){
-    case SQLITE_FCNTL_LOCKSTATE: {
-      *(int*)pArg = pFile->eFileLock;
-      return SQLITE_OK;
-    }
-    case SQLITE_LAST_ERRNO: {
-      *(int*)pArg = pFile->lastErrno;
-      return SQLITE_OK;
-    }
-    case SQLITE_FCNTL_CHUNK_SIZE: {
-      pFile->szChunk = *(int *)pArg;
-      return SQLITE_OK;
-    }
-    case SQLITE_FCNTL_SIZE_HINT: {
-      int rc;
-      SimulateIOErrorBenign(1);
-      rc = fcntlSizeHint(pFile, *(i64 *)pArg);
-      SimulateIOErrorBenign(0);
-      return rc;
-    }
-    case SQLITE_FCNTL_PERSIST_WAL: {
-      rtthreadModeBit(pFile, UNIXFILE_PERSIST_WAL, (int*)pArg);
-      return SQLITE_OK;
-    }
-    case SQLITE_FCNTL_POWERSAFE_OVERWRITE: {
-      rtthreadModeBit(pFile, UNIXFILE_PSOW, (int*)pArg);
-      return SQLITE_OK;
-    }
-    case SQLITE_FCNTL_VFSNAME: {
-      *(char**)pArg = sqlite3_mprintf("%s", pFile->pVfs->zName);
-      return SQLITE_OK;
-    }
-    case SQLITE_FCNTL_TEMPFILENAME: {
-      char *zTFile = sqlite3_malloc( pFile->pVfs->mxPathname );
-      if( zTFile ){
-        rtthreadGetTempname(pFile->pVfs->mxPathname, zTFile);
-        *(char**)pArg = zTFile;
-      }
-      return SQLITE_OK;
-    }
-#ifdef SQLITE_DEBUG
-    /* The pager calls this method to signal that it has done
-    ** a rollback and that the database is therefore unchanged and
-    ** it hence it is OK for the transaction change counter to be
-    ** unchanged.
-    */
-    case SQLITE_FCNTL_DB_UNCHANGED: {
-      ((rtthreadFile*)id)->dbUpdate = 0;
-      return SQLITE_OK;
-    }
-#endif
-  }
-  return SQLITE_NOTFOUND;
-}
-
-/*
-** Return the sector size in bytes of the underlying block device for
-** the specified file. This is almost always 512 bytes, but may be
-** larger for some devices.
-**
-** SQLite code assumes this function cannot fail. It also assumes that
-** if two files are created in the same file-system directory (i.e.
-** a database and its journal file) that the sector size will be the
-** same for both.
-*/
-static int rtthreadSectorSize(sqlite3_file *NotUsed){
-  UNUSED_PARAMETER(NotUsed);
-  return SQLITE_DEFAULT_SECTOR_SIZE;
-}
-
-
-/*
-** Return the device characteristics for the file.
-**
-** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default.
-** However, that choice is contraversial since technically the underlying
-** file system does not always provide powersafe overwrites.  (In other
-** words, after a power-loss event, parts of the file that were never
-** written might end up being altered.)  However, non-PSOW behavior is very,
-** very rare.  And asserting PSOW makes a large reduction in the amount
-** of required I/O for journaling, since a lot of padding is eliminated.
-**  Hence, while POWERSAFE_OVERWRITE is on by default, there is a file-control
-** available to turn it off and URI query parameter available to turn it off.
-*/
-static int rtthreadDeviceCharacteristics(sqlite3_file *id){
-  rtthreadFile *p = (rtthreadFile*)id;
-  int rc = 0;
-
-  if( p->ctrlFlags & UNIXFILE_PSOW ){
-    rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
-  }
-  return rc;
-}
-
-#ifndef SQLITE_OMIT_WAL
-#  error "WAL mode requires not support from the rt-thread, compile\
- with SQLITE_OMIT_WAL."
-#else
-# define rtthreadShmMap     0
-# define rtthreadShmLock    0
-# define rtthreadShmBarrier 0
-# define rtthreadShmUnmap   0
-#endif /* #ifndef SQLITE_OMIT_WAL */
-
-#if SQLITE_MAX_MMAP_SIZE>0
-#error "rtthread not spportt mmap"
-#endif /* SQLITE_MAX_MMAP_SIZE>0 */
-
-/*
-** If possible, return a pointer to a mapping of file fd starting at offset
-** iOff. The mapping must be valid for at least nAmt bytes.
-**
-** If such a pointer can be obtained, store it in *pp and return SQLITE_OK.
-** Or, if one cannot but no error occurs, set *pp to 0 and return SQLITE_OK.
-** Finally, if an error does occur, return an SQLite error code. The final
-** value of *pp is undefined in this case.
-**
-** If this function does return a pointer, the caller must eventually
-** release the reference by calling unixUnfetch().
-*/
-static int rtthreadFetch(sqlite3_file *fd, i64 iOff, int nAmt, void **pp){
-
-  *pp = 0;
-
-  return SQLITE_OK;
-}
-
-/*
-** If the third argument is non-NULL, then this function releases a
-** reference obtained by an earlier call to unixFetch(). The second
-** argument passed to this function must be the same as the corresponding
-** argument that was passed to the unixFetch() invocation.
-**
-** Or, if the third argument is NULL, then this function is being called
-** to inform the VFS layer that, according to POSIX, any existing mapping
-** may now be invalid and should be unmapped.
-*/
-static int rtthreadUnfetch(sqlite3_file *fd, i64 iOff, void *p){
-  rtthreadFile *pFd = (rtthreadFile *)fd;   /* The underlying database file */
-  UNUSED_PARAMETER(iOff);
-
-  return SQLITE_OK;
-}
-
-/*
-** Here ends the implementation of all sqlite3_file methods.
-**
-********************** End sqlite3_file Methods *******************************
-******************************************************************************/
-
-/*
-** This division contains definitions of sqlite3_io_methods objects that
-** implement various file locking strategies.  It also contains definitions
-** of "finder" functions.  A finder-function is used to locate the appropriate
-** sqlite3_io_methods object for a particular database file.  The pAppData
-** field of the sqlite3_vfs VFS objects are initialized to be pointers to
-** the correct finder-function for that VFS.
-**
-** Most finder functions return a pointer to a fixed sqlite3_io_methods
-** object.  The only interesting finder-function is autolockIoFinder, which
-** looks at the filesystem type and tries to guess the best locking
-** strategy from that.
-**
-** For finder-funtion F, two objects are created:
-**
-**    (1) The real finder-function named "FImpt()".
-**
-**    (2) A constant pointer to this function named just "F".
-**
-**
-** A pointer to the F pointer is used as the pAppData value for VFS
-** objects.  We have to do this instead of letting pAppData point
-** directly at the finder-function since C90 rules prevent a void*
-** from be cast into a function pointer.
-**
-**
-** Each instance of this macro generates two objects:
-**
-**   *  A constant sqlite3_io_methods object call METHOD that has locking
-**      methods CLOSE, LOCK, UNLOCK, CKRESLOCK.
-**
-**   *  An I/O method finder function called FINDER that returns a pointer
-**      to the METHOD object in the previous bullet.
-*/
-#define IOMETHODS(FINDER, METHOD, VERSION, CLOSE, LOCK, UNLOCK, CKLOCK)      \
-static const sqlite3_io_methods METHOD = {                                   \
-   VERSION,                    /* iVersion */                                \
-   CLOSE,                      /* xClose */                                  \
-   rtthreadRead,                   /* xRead */                                   \
-   rtthreadWrite,                  /* xWrite */                                  \
-   rtthreadTruncate,               /* xTruncate */                               \
-   rtthreadSync,                   /* xSync */                                   \
-   rtthreadFileSize,               /* xFileSize */                               \
-   LOCK,                       /* xLock */                                   \
-   UNLOCK,                     /* xUnlock */                                 \
-   CKLOCK,                     /* xCheckReservedLock */                      \
-   rtthreadFileControl,            /* xFileControl */                            \
-   rtthreadSectorSize,             /* xSectorSize */                             \
-   rtthreadDeviceCharacteristics,  /* xDeviceCapabilities */                     \
-   rtthreadShmMap,                 /* xShmMap */                                 \
-   rtthreadShmLock,                /* xShmLock */                                \
-   rtthreadShmBarrier,             /* xShmBarrier */                             \
-   rtthreadShmUnmap,               /* xShmUnmap */                               \
-   rtthreadFetch,                  /* xFetch */                                  \
-   rtthreadUnfetch,                /* xUnfetch */                                \
-};                                                                           \
-static const sqlite3_io_methods *FINDER##Impl(const char *z, rtthreadFile *p){   \
-  UNUSED_PARAMETER(z); UNUSED_PARAMETER(p);                                  \
-  return &METHOD;                                                            \
-}                                                                            \
-static const sqlite3_io_methods *(*const FINDER)(const char*,rtthreadFile *p)    \
-    = FINDER##Impl;
-
-/*
-** Here are all of the sqlite3_io_methods objects for each of the
-** locking strategies.  Functions that return pointers to these methods
-** are also created.
-*/
-IOMETHODS(
-  nolockIoFinder,           /* Finder function name */
-  nolockIoMethods,          /* sqlite3_io_methods object name */
-  1,                        /* shared memory is disabled */
-  nolockClose,              /* xClose method */
-  nolockLock,               /* xLock method */
-  nolockUnlock,             /* xUnlock method */
-  nolockCheckReservedLock   /* xCheckReservedLock method */
-)
-IOMETHODS(
-  dotlockIoFinder,          /* Finder function name */
-  dotlockIoMethods,         /* sqlite3_io_methods object name */
-  1,                        /* shared memory is disabled */
-  dotlockClose,             /* xClose method */
-  dotlockLock,              /* xLock method */
-  dotlockUnlock,            /* xUnlock method */
-  dotlockCheckReservedLock  /* xCheckReservedLock method */
-)
-
-#if SQLITE_ENABLE_LOCKING_STYLE
-IOMETHODS(
-  flockIoFinder,            /* Finder function name */
-  flockIoMethods,           /* sqlite3_io_methods object name */
-  1,                        /* shared memory is disabled */
-  flockClose,               /* xClose method */
-  flockLock,                /* xLock method */
-  flockUnlock,              /* xUnlock method */
-  flockCheckReservedLock    /* xCheckReservedLock method */
-)
-#endif
-
-/*
-** An abstract type for a pointer to a IO method finder function:
-*/
-typedef const sqlite3_io_methods *(*finder_type)(const char*,rtthreadFile*);
-
-
-/****************************************************************************
-**************************** sqlite3_vfs methods ****************************
-**
-** This division contains the implementation of methods on the
-** sqlite3_vfs object.
-*/
-
-/*
-** Initialize the contents of the rtthreadFile structure pointed to by pId.
-*/
-static int fillInRtthreadFile(
-  sqlite3_vfs *pVfs,      /* Pointer to vfs object */
-  int h,                  /* Open file descriptor of file being opened */
-  sqlite3_file *pId,      /* Write to the rtthreadFile structure here */
-  const char *zFilename,  /* Name of the file being opened */
-  int ctrlFlags           /* Zero or more UNIXFILE_* values */
-){
-  const sqlite3_io_methods *pLockingStyle;
-  rtthreadFile *pNew = (rtthreadFile *)pId;
-  int rc = SQLITE_OK;
-
-  assert( pNew->pInode==NULL );
-
-  /* Usually the path zFilename should not be a relative pathname. The
-  ** exception is when opening the proxy "conch" file in builds that
-  ** include the special Apple locking styles.
-  */
-  assert( zFilename==0 || zFilename[0]=='/' );
-
-  /* No locking occurs in temporary files */
-  assert( zFilename!=0 || (ctrlFlags & UNIXFILE_NOLOCK)!=0 );
-
-  OSTRACE(("OPEN    %-3d %s\n", h, zFilename));
-  pNew->h = h;
-  pNew->pVfs = pVfs;
-  pNew->zPath = zFilename;
-  pNew->ctrlFlags = (u8)ctrlFlags;
-  if( sqlite3_uri_boolean(((ctrlFlags & UNIXFILE_URI) ? zFilename : 0),
-                           "psow", SQLITE_POWERSAFE_OVERWRITE) ){
-    pNew->ctrlFlags |= UNIXFILE_PSOW;
-  }
-  if( strcmp(pVfs->zName,"unix-excl")==0 ){
-    pNew->ctrlFlags |= UNIXFILE_EXCL;
-  }
-
-  if( ctrlFlags & UNIXFILE_NOLOCK ){
-    pLockingStyle = &nolockIoMethods;
-  }else{
-    pLockingStyle = (**(finder_type*)pVfs->pAppData)(zFilename, pNew);
-#if SQLITE_ENABLE_LOCKING_STYLE
-    /* Cache zFilename in the locking context (AFP and dotlock override) for
-    ** proxyLock activation is possible (remote proxy is based on db name)
-    ** zFilename remains valid until file is closed, to support */
-    pNew->lockingContext = (void*)zFilename;
-#endif
-  }
-
-  if( pLockingStyle == &dotlockIoMethods ){
-    /* Dotfile locking uses the file path so it needs to be included in
-    ** the dotlockLockingContext
-    */
-    char *zLockFile;
-    int nFilename;
-    assert( zFilename!=0 );
-    nFilename = (int)strlen(zFilename) + 6;
-    zLockFile = (char *)sqlite3_malloc(nFilename);
-    if( zLockFile==0 ){
-      rc = SQLITE_NOMEM;
-    }else{
-      sqlite3_snprintf(nFilename, zLockFile, "%s" DOTLOCK_SUFFIX, zFilename);
-    }
-    pNew->lockingContext = zLockFile;
-  }
-
-  pNew->lastErrno = 0;
-  if( rc!=SQLITE_OK ){
-    if( h>=0 ) robust_close(pNew, h, __LINE__);
-  }else{
-    pNew->pMethod = pLockingStyle;
-    OpenCounter(+1);
-    verifyDbFile(pNew);
-  }
-  return rc;
-}
-
-/*
-** Return the name of a directory in which to put temporary files.
-** If no suitable temporary file directory can be found, return NULL.
-*/
-static const char* rtthreadTempFileDir(void){
-  static const char *azDirs[] = {
-     0,
-     "/sql",
-     "/sql/tmp"
-     "/tmp",
-     0        /* List terminator */
-  };
-  unsigned int i;
-  struct stat buf;
-  const char *zDir = 0;
-
-  azDirs[0] = sqlite3_temp_directory;
-
-  for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); zDir=azDirs[i++]){
-    if( zDir==0 ) continue;
-    if( osStat(zDir, &buf) ) continue;
-    if( !S_ISDIR(buf.st_mode) ) continue;
-    break;
-  }
-  return zDir;
-}
-
-/*
-** Create a temporary file name in zBuf.  zBuf must be allocated
-** by the calling process and must be big enough to hold at least
-** pVfs->mxPathname bytes.
-*/
-static int rtthreadGetTempname(int nBuf, char *zBuf){
-  static const unsigned char zChars[] =
-    "abcdefghijklmnopqrstuvwxyz"
-    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-    "0123456789";
-  unsigned int i, j;
-  const char *zDir;
-
-  /* It's odd to simulate an io-error here, but really this is just
-  ** using the io-error infrastructure to test that SQLite handles this
-  ** function failing.
-  */
-  SimulateIOError( return SQLITE_IOERR );
-
-  zDir = rtthreadTempFileDir();
-  if( zDir==0 ) zDir = ".";
-
-  /* Check that the output buffer is large enough for the temporary file
-  ** name. If it is not, return SQLITE_ERROR.
-  */
-  if( (strlen(zDir) + strlen(SQLITE_TEMP_FILE_PREFIX) + 18) >= (size_t)nBuf ){
-    return SQLITE_ERROR;
-  }
-
-  do{
-    sqlite3_snprintf(nBuf-18, zBuf, "%s/"SQLITE_TEMP_FILE_PREFIX, zDir);
-    j = (int)strlen(zBuf);
-    sqlite3_randomness(15, &zBuf[j]);
-    for(i=0; i<15; i++, j++){
-      zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
-    }
-    zBuf[j] = 0;
-    zBuf[j+1] = 0;
-  }while( osAccess(zBuf,0)==0 );
-  return SQLITE_OK;
-}
-
-/*
-** Open the file zPath.
-**
-** Previously, the SQLite OS layer used three functions in place of this
-** one:
-**
-**     sqlite3OsOpenReadWrite();
-**     sqlite3OsOpenReadOnly();
-**     sqlite3OsOpenExclusive();
-**
-** These calls correspond to the following combinations of flags:
-**
-**     ReadWrite() ->     (READWRITE | CREATE)
-**     ReadOnly()  ->     (READONLY)
-**     OpenExclusive() -> (READWRITE | CREATE | EXCLUSIVE)
-**
-** The old OpenExclusive() accepted a boolean argument - "delFlag". If
-** true, the file was configured to be automatically deleted when the
-** file handle closed. To achieve the same effect using this new
-** interface, add the DELETEONCLOSE flag to those specified above for
-** OpenExclusive().
-*/
-static int rtthreadOpen(
-  sqlite3_vfs *pVfs,           /* The VFS for which this is the xOpen method */
-  const char *zPath,           /* Pathname of file to be opened */
-  sqlite3_file *pFile,         /* The file descriptor to be filled in */
-  int flags,                   /* Input flags to control the opening */
-  int *pOutFlags               /* Output flags returned to SQLite core */
-){
-  rtthreadFile *p = (rtthreadFile *)pFile;
-  int fd = -1;                   /* File descriptor returned by open() */
-  int openFlags = 0;             /* Flags to pass to open() */
-  int eType = flags&0xFFFFFF00;  /* Type of file to open */
-  int noLock;                    /* True to omit locking primitives */
-  int rc = SQLITE_OK;            /* Function Return Code */
-  int ctrlFlags = 0;             /* UNIXFILE_* flags */
-
-  int isExclusive  = (flags & SQLITE_OPEN_EXCLUSIVE);
-  int isDelete     = (flags & SQLITE_OPEN_DELETEONCLOSE);
-  int isCreate     = (flags & SQLITE_OPEN_CREATE);
-  int isReadonly   = (flags & SQLITE_OPEN_READONLY);
-  int isReadWrite  = (flags & SQLITE_OPEN_READWRITE);
-#if SQLITE_ENABLE_LOCKING_STYLE
-  int isAutoProxy  = (flags & SQLITE_OPEN_AUTOPROXY);
-#endif
-
-  /* If creating a master or main-file journal, this function will open
-  ** a file-descriptor on the directory too. The first time unixSync()
-  ** is called the directory file descriptor will be fsync()ed and close()d.
-  */
-  int syncDir = (isCreate && (
-        eType==SQLITE_OPEN_MASTER_JOURNAL
-     || eType==SQLITE_OPEN_MAIN_JOURNAL
-     || eType==SQLITE_OPEN_WAL
-  ));
-
-  /* If argument zPath is a NULL pointer, this function is required to open
-  ** a temporary file. Use this buffer to store the file name in.
-  */
-  char zTmpname[MAX_PATHNAME+2];
-  const char *zName = zPath;
-
-  /* Check the following statements are true:
-  **
-  **   (a) Exactly one of the READWRITE and READONLY flags must be set, and
-  **   (b) if CREATE is set, then READWRITE must also be set, and
-  **   (c) if EXCLUSIVE is set, then CREATE must also be set.
-  **   (d) if DELETEONCLOSE is set, then CREATE must also be set.
-  */
-  assert((isReadonly==0 || isReadWrite==0) && (isReadWrite || isReadonly));
-  assert(isCreate==0 || isReadWrite);
-  assert(isExclusive==0 || isCreate);
-  assert(isDelete==0 || isCreate);
-
-  /* The main DB, main journal, WAL file and master journal are never
-  ** automatically deleted. Nor are they ever temporary files.  */
-  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_DB );
-  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_JOURNAL );
-  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MASTER_JOURNAL );
-  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_WAL );
-
-  /* Assert that the upper layer has set one of the "file-type" flags. */
-  assert( eType==SQLITE_OPEN_MAIN_DB      || eType==SQLITE_OPEN_TEMP_DB
-       || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL
-       || eType==SQLITE_OPEN_SUBJOURNAL   || eType==SQLITE_OPEN_MASTER_JOURNAL
-       || eType==SQLITE_OPEN_TRANSIENT_DB || eType==SQLITE_OPEN_WAL
-  );
-
-  memset(p, 0, sizeof(rtthreadFile));
-  if( !zName ){
-    /* If zName is NULL, the upper layer is requesting a temp file. */
-    assert(isDelete && !syncDir);
-    rc = rtthreadGetTempname(MAX_PATHNAME+2, zTmpname);
-    if( rc!=SQLITE_OK ){
-      return rc;
-    }
-    zName = zTmpname;
-
-    /* Generated temporary filenames are always double-zero terminated
-    ** for use by sqlite3_uri_parameter(). */
-    assert( zName[strlen(zName)+1]==0 );
-  }
-
-  /* Determine the value of the flags parameter passed to POSIX function
-  ** open(). These must be calculated even if open() is not called, as
-  ** they may be stored as part of the file handle and used by the
-  ** 'conch file' locking functions later on.  */
-  if( isReadonly )  openFlags |= O_RDONLY;
-  if( isReadWrite ) openFlags |= O_RDWR;
-  if( isCreate )    openFlags |= O_CREAT;
-  if( isExclusive ) openFlags |= (O_EXCL|0/*O_NOFOLLOW8*/);
-  openFlags |= (0/*O_LARGEFILE*/|O_BINARY);
-
-  if( fd<0 ){
-    mode_t openMode = 0;              /* Permissions to create file with */
-
-    fd = robust_open(zName, openFlags, openMode);
-    OSTRACE(("OPENX   %-3d %s 0%o\n", fd, zName, openFlags));
-    if( fd<0 && errno!=DFS_STATUS_EISDIR && isReadWrite && !isExclusive ){
-      /* Failed to open the file for read/write access. Try read-only. */
-      flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
-      openFlags &= ~(O_RDWR|O_CREAT);
-      flags |= SQLITE_OPEN_READONLY;
-      openFlags |= O_RDONLY;
-      isReadonly = 1;
-      fd = robust_open(zName, openFlags, openMode);
-    }
-    if( fd<0 ){
-      rc = rtthreadLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
-      goto open_finished;
-    }
-  }
-  assert( fd>=0 );
-  if( pOutFlags ){
-    *pOutFlags = flags;
-  }
-
-  if( isDelete ){
-    osUnlink(zName);
-  }
-#if SQLITE_ENABLE_LOCKING_STYLE
-  else{
-    p->openFlags = openFlags;
-  }
-#endif
-
-  noLock = eType!=SQLITE_OPEN_MAIN_DB;
-
-  /* Set up appropriate ctrlFlags */
-  if( isDelete )                ctrlFlags |= UNIXFILE_DELETE;
-  if( isReadonly )              ctrlFlags |= UNIXFILE_RDONLY;
-  if( noLock )                  ctrlFlags |= UNIXFILE_NOLOCK;
-  if( syncDir )                 ctrlFlags |= UNIXFILE_DIRSYNC;
-  if( flags & SQLITE_OPEN_URI ) ctrlFlags |= UNIXFILE_URI;
-
-  rc = fillInRtthreadFile(pVfs, fd, pFile, zPath, ctrlFlags);
-
-open_finished:
-
-  return rc;
-}
-
-
-/*
-** Delete the file at zPath. If the dirSync argument is true, fsync()
-** the directory after deleting the file.
-*/
-static int rtthreadDelete(
-  sqlite3_vfs *NotUsed,     /* VFS containing this as the xDelete method */
-  const char *zPath,        /* Name of file to be deleted */
-  int dirSync               /* If true, fsync() directory after deleting file */
-){
-  int rc = SQLITE_OK;
-  UNUSED_PARAMETER(NotUsed);
-  SimulateIOError(return SQLITE_IOERR_DELETE);
-  if( osUnlink(zPath)==(-1) ){
-    if( errno==DFS_STATUS_ENOENT ){
-      rc = SQLITE_IOERR_DELETE_NOENT;
-    }else{
-      rc = rtthreadLogError(SQLITE_IOERR_DELETE, "unlink", zPath);
-    }
-    return rc;
-  }
-#ifndef SQLITE_DISABLE_DIRSYNC
-  if( (dirSync & 1)!=0 ){
-    int fd;
-    rc = osOpenDirectory(zPath, &fd);
-    if( rc==SQLITE_OK ){
-      robust_close(0, fd, __LINE__);
-    }else if( rc==SQLITE_CANTOPEN ){
-      rc = SQLITE_OK;
-    }
-  }
-#endif
-  return rc;
-}
-
-/*
-** Test the existence of or access permissions of file zPath. The
-** test performed depends on the value of flags:
-**
-**     SQLITE_ACCESS_EXISTS: Return 1 if the file exists
-**     SQLITE_ACCESS_READWRITE: Return 1 if the file is read and writable.
-**     SQLITE_ACCESS_READONLY: Return 1 if the file is readable.
-**
-** Otherwise return 0.
-*/
-
-#ifndef F_OK
-# define F_OK 0
-#endif
-#ifndef R_OK
-# define R_OK 4
-#endif
-#ifndef W_OK
-# define W_OK 2
-#endif
-
-static int rtthreadAccess(
-  sqlite3_vfs *NotUsed,   /* The VFS containing this xAccess method */
-  const char *zPath,      /* Path of the file to examine */
-  int flags,              /* What do we want to learn about the zPath file? */
-  int *pResOut            /* Write result boolean here */
-){
-  int amode = 0;
-  UNUSED_PARAMETER(NotUsed);
-  SimulateIOError( return SQLITE_IOERR_ACCESS; );
-  switch( flags ){
-    case SQLITE_ACCESS_EXISTS:
-      amode = F_OK;
-      break;
-    case SQLITE_ACCESS_READWRITE:
-      amode = W_OK|R_OK;
-      break;
-    case SQLITE_ACCESS_READ:
-      amode = R_OK;
-      break;
-
-    default:
-      assert(!"Invalid flags argument");
-  }
-  *pResOut = (osAccess(zPath, amode)==0);
-  if( flags==SQLITE_ACCESS_EXISTS && *pResOut ){
-    struct stat buf;
-    if( 0==osStat(zPath, &buf) && buf.st_size==0 ){
-      *pResOut = 0;
-    }
-  }
-  return SQLITE_OK;
-}
-
-
-/*
-** Turn a relative pathname into a full pathname. The relative path
-** is stored as a nul-terminated string in the buffer pointed to by
-** zPath.
-**
-** zOut points to a buffer of at least sqlite3_vfs.mxPathname bytes
-** (in this case, MAX_PATHNAME bytes). The full-path is written to
-** this buffer before returning.
-*/
-static int rtthreadFullPathname(
-  sqlite3_vfs *pVfs,            /* Pointer to vfs object */
-  const char *zPath,            /* Possibly relative input path */
-  int nOut,                     /* Size of output buffer in bytes */
-  char *zOut                    /* Output buffer */
-){
-
-  /* It's odd to simulate an io-error here, but really this is just
-  ** using the io-error infrastructure to test that SQLite handles this
-  ** function failing. This function could fail if, for example, the
-  ** current working directory has been unlinked.
-  */
-  SimulateIOError( return SQLITE_ERROR );
-
-  assert( pVfs->mxPathname==MAX_PATHNAME );
-  UNUSED_PARAMETER(pVfs);
-
-  zOut[nOut-1] = '\0';
-  if( zPath[0]=='/' ){
-    sqlite3_snprintf(nOut, zOut, "%s", zPath);
-  }else{
-    int nCwd;
-    if( osGetcwd(zOut, nOut-1)==0 ){
-      return rtthreadLogError(SQLITE_CANTOPEN_BKPT, "getcwd", zPath);
-    }
-    nCwd = (int)strlen(zOut);
-    sqlite3_snprintf(nOut-nCwd, &zOut[nCwd], "/%s", zPath);
-  }
-  return SQLITE_OK;
-}
-
-
-#ifndef SQLITE_OMIT_LOAD_EXTENSION
-# error "rtthread not support load extension, compile with SQLITE_OMIT_WAL."
-#else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */
-  #define rtthreadDlOpen  0
-  #define rtthreadDlError 0
-  #define rtthreadDlSym   0
-  #define rtthreadDlClose 0
-#endif
-
-/*
-** Write nBuf bytes of random data to the supplied buffer zBuf.
-*/
-static int rtthreadRandomness(sqlite3_vfs *NotUsed, int nBuf, char *zBuf){
-  UNUSED_PARAMETER(NotUsed);
-  assert((size_t)nBuf>=(sizeof(time_t)+sizeof(int)));
-
-  /* We have to initialize zBuf to prevent valgrind from reporting
-  ** errors.  The reports issued by valgrind are incorrect - we would
-  ** prefer that the randomness be increased by making use of the
-  ** uninitialized space in zBuf - but valgrind errors tend to worry
-  ** some users.  Rather than argue, it seems easier just to initialize
-  ** the whole array and silence valgrind, even if that means less randomness
-  ** in the random seed.
-  **
-  ** When testing, initializing zBuf[] to zero is all we do.  That means
-  ** that we always use the same random number sequence.  This makes the
-  ** tests repeatable.
-  */
-  memset(zBuf, 0, nBuf);
-  {
-    int i;
-    char tick8, tick16;
-    tick8 = (char)rt_tick_get();
-    tick16 = (char)(rt_tick_get() >> 8);
-
-    for (i=0; i<nBuf; i++)
-    {
-        zBuf[i] = (char)(i ^ tick8 ^ tick16);
-        tick8 = zBuf[i];
-        tick16 = ~(tick8 ^ tick16);
-    }
-  }
-  return nBuf;
-}
-
-
-/*
-** Sleep for a little while.  Return the amount of time slept.
-** The argument is the number of microseconds we want to sleep.
-** The return value is the number of microseconds of sleep actually
-** requested from the underlying operating system, a number which
-** might be greater than or equal to the argument, but not less
-** than the argument.
-*/
-static int rtthreadSleep(sqlite3_vfs *NotUsed, int microseconds){
-
-  int seconds = (microseconds+999999)/1000000;
-  osSleep(seconds * 1000);
-  UNUSED_PARAMETER(NotUsed);
-  return seconds*1000000;
-}
-
-/*
-** The following variable, if set to a non-zero value, is interpreted as
-** the number of seconds since 1970 and is used to set the result of
-** sqlite3OsCurrentTime() during testing.
-*/
-#ifdef SQLITE_TEST
-int sqlite3_current_time = 0;  /* Fake system time in seconds since 1970. */
-#endif
-
-#ifndef NO_GETTOD
-#define NO_GETTOD 1
-#endif
-
-/*
-** Find the current time (in Universal Coordinated Time).  Write into *piNow
-** the current time and date as a Julian Day number times 86_400_000.  In
-** other words, write into *piNow the number of milliseconds since the Julian
-** epoch of noon in Greenwich on November 24, 4714 B.C according to the
-** proleptic Gregorian calendar.
-**
-** On success, return SQLITE_OK.  Return SQLITE_ERROR if the time and date
-** cannot be found.
-*/
-static int rtthreadCurrentTimeInt64(sqlite3_vfs *NotUsed, sqlite3_int64 *piNow){
-  static const sqlite3_int64 rtthreadEpoch = 24405875*(sqlite3_int64)8640000;
-  int rc = SQLITE_OK;
-#if defined(NO_GETTOD)
-  time_t t;
-  time(&t);
-  *piNow = ((sqlite3_int64)t)*1000 + rtthreadEpoch;
-#else
-  struct timeval sNow;
-  if( gettimeofday(&sNow, 0)==0 ){
-    *piNow = rtthreadEpoch + 1000*(sqlite3_int64)sNow.tv_sec + sNow.tv_usec/1000;
-  }else{
-    rc = SQLITE_ERROR;
-  }
-#endif
-
-#ifdef SQLITE_TEST
-  if( sqlite3_current_time ){
-    *piNow = 1000*(sqlite3_int64)sqlite3_current_time + rtthreadEpoch;
-  }
-#endif
-  UNUSED_PARAMETER(NotUsed);
-  return rc;
-}
-
-/*
-** Find the current time (in Universal Coordinated Time).  Write the
-** current time and date as a Julian Day number into *prNow and
-** return 0.  Return 1 if the time and date cannot be found.
-*/
-static int rtthreadCurrentTime(sqlite3_vfs *NotUsed, double *prNow){
-  sqlite3_int64 i = 0;
-  int rc;
-  UNUSED_PARAMETER(NotUsed);
-  rc = rtthreadCurrentTimeInt64(0, &i);
-  *prNow = i/86400000.0;
-  return rc;
-}
-
-/*
-** We added the xGetLastError() method with the intention of providing
-** better low-level error messages when operating-system problems come up
-** during SQLite operation.  But so far, none of that has been implemented
-** in the core.  So this routine is never called.  For now, it is merely
-** a place-holder.
-*/
-static int rtthreadGetLastError(sqlite3_vfs *NotUsed, int NotUsed2, char *NotUsed3){
-  UNUSED_PARAMETER(NotUsed);
-  UNUSED_PARAMETER(NotUsed2);
-  UNUSED_PARAMETER(NotUsed3);
-  return 0;
-}
-
-
-/*
-************************ End of sqlite3_vfs methods ***************************
-******************************************************************************/
-
-/*
-** Initialize the operating system interface.
-**
-** This routine registers all VFS implementations for unix-like operating
-** systems.  This routine, and the sqlite3_os_end() routine that follows,
-** should be the only routines in this file that are visible from other
-** files.
-**
-** This routine is called once during SQLite initialization and by a
-** single thread.  The memory allocation and mutex subsystems have not
-** necessarily been initialized when this routine is called, and so they
-** should not be used.
-*/
-/*
-  ** The following macro defines an initializer for an sqlite3_vfs object.
-  ** The name of the VFS is NAME.  The pAppData is a pointer to a pointer
-  ** to the "finder" function.  (pAppData is a pointer to a pointer because
-  ** silly C90 rules prohibit a void* from being cast to a function pointer
-  ** and so we have to go through the intermediate pointer to avoid problems
-  ** when compiling with -pedantic-errors on GCC.)
-  **
-  ** The FINDER parameter to this macro is the name of the pointer to the
-  ** finder-function.  The finder-function returns a pointer to the
-  ** sqlite_io_methods object that implements the desired locking
-  ** behaviors.  See the division above that contains the IOMETHODS
-  ** macro for addition information on finder-functions.
-  **
-  ** Most finders simply return a pointer to a fixed sqlite3_io_methods
-  ** object.  But the "autolockIoFinder" available on MacOSX does a little
-  ** more than that; it looks at the filesystem type that hosts the
-  ** database file and tries to choose an locking method appropriate for
-  ** that filesystem time.
-  */
-#define UNIXVFS(VFSNAME, FINDER) {                          \
-    3,                    /* iVersion */                    \
-    sizeof(rtthreadFile),     /* szOsFile */                \
-    MAX_PATHNAME,         /* mxPathname */                  \
-    0,                    /* pNext */                       \
-    VFSNAME,              /* zName */                       \
-    (void*)&FINDER,       /* pAppData */                    \
-    rtthreadOpen,             /* xOpen */                       \
-    rtthreadDelete,           /* xDelete */                     \
-    rtthreadAccess,           /* xAccess */                     \
-    rtthreadFullPathname,     /* xFullPathname */               \
-    rtthreadDlOpen,           /* xDlOpen */                     \
-    rtthreadDlError,          /* xDlError */                    \
-    rtthreadDlSym,            /* xDlSym */                      \
-    rtthreadDlClose,          /* xDlClose */                    \
-    rtthreadRandomness,       /* xRandomness */                 \
-    rtthreadSleep,            /* xSleep */                      \
-    rtthreadCurrentTime,      /* xCurrentTime */                \
-    rtthreadGetLastError,     /* xGetLastError */               \
-    rtthreadCurrentTimeInt64, /* xCurrentTimeInt64 */           \
-    rtthreadSetSystemCall,    /* xSetSystemCall */              \
-    rtthreadGetSystemCall,    /* xGetSystemCall */              \
-    rtthreadNextSystemCall,   /* xNextSystemCall */             \
-  }
-
-int sqlite3_os_init(void){
-  /*
-  ** All default VFSes for unix are contained in the following array.
-  **
-  ** Note that the sqlite3_vfs.pNext field of the VFS object is modified
-  ** by the SQLite core when the VFS is registered.  So the following
-  ** array cannot be const.
-  */
-  static sqlite3_vfs aVfs[] = {
-    UNIXVFS("unix-none",     nolockIoFinder ),
-    UNIXVFS("unix-dotfile",  dotlockIoFinder ),
-#if SQLITE_ENABLE_LOCKING_STYLE
-    UNIXVFS("unix-flock",    flockIoFinder ),
-#endif
-  };
-  unsigned int i;          /* Loop counter */
-
-  /* Double-check that the aSyscall[] array has been constructed
-  ** correctly.  See ticket [bb3a86e890c8e96ab] */
-  assert( ArraySize(aSyscall)==24 );
-
-  /* Register all VFSes defined in the aVfs[] array */
-  for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
-    sqlite3_vfs_register(&aVfs[i], i==0);
-  }
-  return SQLITE_OK;
-}
-
-/*
-** Shutdown the operating system interface.
-**
-** Some operating systems might need to do some cleanup in this routine,
-** to release dynamically allocated objects.  But not on unix.
-** This routine is a no-op for unix.
-*/
-int sqlite3_os_end(void){
-  return SQLITE_OK;
-}
-
-
-#endif /* SQLITE_OS_RTTHREAD */
-