add vfs/fs porting

1 files changed, 2651 insertions, 0 deletions

diff --git a/components/external/SQLite-3.8.1/src/os_rtt.c b/components/external/SQLite-3.8.1/src/os_rtt.c
new file mode 100644
index 0000000000..54a41bc0f6
--- /dev/null
+++ b/components/external/SQLite-3.8.1/src/os_rtt.c
@@ -0,0 +1,2651 @@
+/*
+** 2004 May 22
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file contains code that is specific to Windows.
+*/
+#include "sqliteInt.h"
+#if SQLITE_OS_RTT               /* This file is used for rt-thread only */
+
+#include <rtthread.h>
+
+/*
+** Include code that is common to all os_*.c files
+*/
+#include "os_common.h"
+
+/*
+** Compiling and using WAL mode requires several APIs that are not
+** available in rt-thread.
+*/
+#if !defined(SQLITE_OMIT_WAL)
+#  error "WAL mode requires not support from the rt-thread, compile\
+ with SQLITE_OMIT_WAL."
+#endif
+
+/*
+** Are most of the rtt ANSI APIs available (i.e. with certain exceptions
+** based on the sub-platform)?
+*/
+#if !defined(SQLITE_RTT_NO_ANSI)
+#  warning "please ensure rtt ANSI APIs is available, otherwise compile with\
+ SQLITE_RTT_NO_ANSI"
+#  define SQLITE_RTT_HAS_ANSI
+#endif
+
+/*
+** Are most of the rtt Unicode APIs available (i.e. with certain exceptions
+** based on the sub-platform)?
+*/
+#if !defined(SQLITE_RTT_NO_WIDE)
+#  error "rtt not support Unicode APIs"
+#  define SQLITE_RTT_HAS_WIDE
+#endif
+
+/*
+** Make sure at least one set of rtt APIs is available.
+*/
+#if !defined(SQLITE_RTT_HAS_ANSI) && !defined(SQLITE_RTT_HAS_WIDE)
+#  error "At least one of SQLITE_RTT_HAS_ANSI and SQLITE_RTT_HAS_WIDE\
+ must be defined."
+#endif
+
+/*
+** Maximum pathname length (in chars) for rtt.  This should normally be
+** MAX_PATH.
+*/
+#ifndef SQLITE_RTT_MAX_PATH_CHARS
+#  warning "default Maximum pathname length be 255, otherwise compile with\
+ SQLITE_RTT_MAX_PATH_CHARS=?"
+#  define SQLITE_RTT_MAX_PATH_CHARS   (255)
+#endif
+
+/*
+** Maximum supported path-length.
+*/
+#define MAX_PATHNAME 512
+
+/*
+** Returns non-zero if the character should be treated as a directory
+** separator.
+*/
+#ifndef rttIsDirSep
+#  define rttIsDirSep(a)                ((a) == '/')
+#endif
+
+/*
+** This macro is used when a local variable is set to a value that is
+** [sometimes] not used by the code (e.g. via conditional compilation).
+*/
+#ifndef UNUSED_VARIABLE_VALUE
+#  define UNUSED_VARIABLE_VALUE(x) (void)(x)
+#endif
+
+/*
+** Returns the string that should be used as the directory separator.
+*/
+#ifndef rttGetDirDep
+#    define rttGetDirDep()              "/"
+#endif
+
+/*
+** The winFile structure is a subclass of sqlite3_file* specific to the win32
+** portability layer.
+*/
+typedef struct rttFile rttFile;
+struct rttFile {
+  sqlite3_io_methods const *pMethod;  /* Always the first entry */
+  sqlite3_vfs *pVfs;                  /* The VFS that created this rttFile */
+  int h;                              /* The file descriptor */
+  unsigned short int ctrlFlags;       /* Behavioral bits.  UNIXFILE_* flags */
+  unsigned char eFileLock;            /* The type of lock held on this fd */
+  int lastErrno;                      /* The unix errno from last I/O error */
+  void *lockingContext;               /* Locking style specific state */
+  const char *zPath;                  /* Name of the file */
+  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */
+#if SQLITE_ENABLE_LOCKING_STYLE
+  int openFlags;                      /* The flags specified at open() */
+#endif
+#if SQLITE_ENABLE_LOCKING_STYLE
+  unsigned fsFlags;                   /* cached details from statfs() */
+#endif
+#ifdef SQLITE_DEBUG
+  /* The next group of variables are used to track whether or not the
+  ** transaction counter in bytes 24-27 of database files are updated
+  ** whenever any part of the database changes.  An assertion fault will
+  ** occur if a file is updated without also updating the transaction
+  ** counter.  This test is made to avoid new problems similar to the
+  ** one described by ticket #3584.
+  */
+  unsigned char transCntrChng;   /* True if the transaction counter changed */
+  unsigned char dbUpdate;        /* True if any part of database file changed */
+  unsigned char inNormalWrite;   /* True if in a normal write operation */
+
+#endif
+
+#ifdef SQLITE_TEST
+  /* In test mode, increase the size of this structure a bit so that
+  ** it is larger than the struct CrashFile defined in test6.c.
+  */
+  char aPadding[32];
+#endif
+};
+
+/*
+** Allowed values for the rttFile.ctrlFlags bitmask:
+*/
+#define UNIXFILE_EXCL        0x01     /* Connections from one process only */
+#define UNIXFILE_RDONLY      0x02     /* Connection is read only */
+#define UNIXFILE_PERSIST_WAL 0x04     /* Persistent WAL mode */
+#ifndef SQLITE_DISABLE_DIRSYNC
+# define UNIXFILE_DIRSYNC    0x08     /* Directory sync needed */
+#else
+# define UNIXFILE_DIRSYNC    0x00
+#endif
+#define UNIXFILE_PSOW        0x10     /* SQLITE_IOCAP_POWERSAFE_OVERWRITE */
+#define UNIXFILE_DELETE      0x20     /* Delete on close */
+#define UNIXFILE_URI         0x40     /* Filename might have query parameters */
+#define UNIXFILE_NOLOCK      0x80     /* Do no file locking */
+#define UNIXFILE_WARNED    0x0100     /* verifyDbFile() warnings have been issued */
+
+/*
+** The following variable is (normally) set once and never changes
+** thereafter.  It records whether the operating system is Win9x
+** or WinNT.
+**
+** 0:   Operating system unknown.
+** 1:   Operating system is rtt.
+**
+** In order to facilitate testing on a rtt system, the test fixture
+** can manually set this value to 1 to emulate Win98 behavior.
+*/
+#ifdef SQLITE_TEST
+int sqlite3_os_type = 0;
+#elif !SQLITE_OS_RTT && \
+      defined(SQLITE_RTT_HAS_ANSI) && defined(SQLITE_RTT_HAS_WIDE)
+static int sqlite3_os_type = 0;
+#endif
+
+#ifndef SYSCALL
+#  define SYSCALL sqlite3_syscall_ptr
+#endif
+
+#include <dfs_posix.h>
+
+static int _Access(const char *pathname, int mode)
+{
+    int fd;
+
+    fd = open(pathname, O_RDONLY, mode);
+
+    if (fd >= 0)
+    {
+        close(fd);
+        return 0;
+    }
+
+    return -1;
+}
+
+/*
+** Invoke open().  Do so multiple times, until it either succeeds or
+** fails for some reason other than EINTR.
+**
+** If the file creation mode "m" is 0 then set it to the default for
+** SQLite.  The default is SQLITE_DEFAULT_FILE_PERMISSIONS (normally
+** 0644) as modified by the system umask.  If m is not 0, then
+** make the file creation mode be exactly m ignoring the umask.
+**
+** The m parameter will be non-zero only when creating -wal, -journal,
+** and -shm files.  We want those files to have *exactly* the same
+** permissions as their original database, unadulterated by the umask.
+** In that way, if a database file is -rw-rw-rw or -rw-rw-r-, and a
+** transaction crashes and leaves behind hot journals, then any
+** process that is able to write to the database will also be able to
+** recover the hot journals.
+*/
+static int robust_open(const char *z, int f, mode_t m);
+
+/*
+** Open a file descriptor to the directory containing file zFilename.
+** If successful, *pFd is set to the opened file descriptor and
+** SQLITE_OK is returned. If an error occurs, either SQLITE_NOMEM
+** or SQLITE_CANTOPEN is returned and *pFd is set to an undefined
+** value.
+**
+** The directory file descriptor is used for only one thing - to
+** fsync() a directory to make sure file creation and deletion events
+** are flushed to disk.  Such fsyncs are not needed on newer
+** journaling filesystems, but are required on older filesystems.
+**
+** This routine can be overridden using the xSetSysCall interface.
+** The ability to override this routine was added in support of the
+** chromium sandbox.  Opening a directory is a security risk (we are
+** told) so making it overrideable allows the chromium sandbox to
+** replace this routine with a harmless no-op.  To make this routine
+** a no-op, replace it with a stub that returns SQLITE_OK but leaves
+** *pFd set to a negative number.
+**
+** If SQLITE_OK is returned, the caller is responsible for closing
+** the file descriptor *pFd using close().
+*/
+static int openDirectory(const char *zFilename, int *pFd);
+
+/*
+** Many system calls are accessed through pointer-to-functions so that
+** they may be overridden at runtime to facilitate fault injection during
+** testing and sandboxing.  The following array holds the names and pointers
+** to all overrideable system calls.
+*/
+static struct rtt_syscall {
+  const char *zName;            /* Name of the system call */
+  sqlite3_syscall_ptr pCurrent; /* Current value of the system call */
+  sqlite3_syscall_ptr pDefault; /* Default value */
+} aSyscall[] = {
+  {"sleep",         (sqlite3_syscall_ptr)rt_thread_delay,   0},
+#define osSleep     ((rt_err_t(*)(rt_tick_t))aSyscall[0].pCurrent)
+
+  { "open",         (sqlite3_syscall_ptr)open,  0  },
+#define osOpen      ((int(*)(const char*,int,int))aSyscall[1].pCurrent)
+
+  { "close",        (sqlite3_syscall_ptr)close,      0  },
+#define osClose     ((int(*)(int))aSyscall[2].pCurrent)
+
+  { "getcwd",       (sqlite3_syscall_ptr)getcwd,     0  },
+#define osGetcwd    ((char*(*)(char*,size_t))aSyscall[3].pCurrent)
+
+  { "stat",         (sqlite3_syscall_ptr)stat,       0  },
+#define osStat      ((int(*)(const char*,struct stat*))aSyscall[4].pCurrent)
+
+  { "fstat",        (sqlite3_syscall_ptr)fstat,      0  },
+#define osFstat     ((int(*)(int,struct stat*))aSyscall[5].pCurrent)
+
+  { "read",         (sqlite3_syscall_ptr)read,       0  },
+#define osRead      ((ssize_t(*)(int,void*,size_t))aSyscall[6].pCurrent)
+
+  { "write",        (sqlite3_syscall_ptr)write,      0  },
+#define osWrite     ((ssize_t(*)(int,const void*,size_t))aSyscall[7].pCurrent)
+
+  { "unlink",       (sqlite3_syscall_ptr)unlink,           0 },
+#define osUnlink    ((int(*)(const char*))aSyscall[8].pCurrent)
+
+  { "openDirectory",    (sqlite3_syscall_ptr)openDirectory,      0 },
+#define osOpenDirectory ((int(*)(const char*,int*))aSyscall[9].pCurrent)
+
+  { "mkdir",        (sqlite3_syscall_ptr)mkdir,           0 },
+#define osMkdir     ((int(*)(const char*,mode_t))aSyscall[10].pCurrent)
+
+  { "rmdir",        (sqlite3_syscall_ptr)rmdir,           0 },
+#define osRmdir     ((int(*)(const char*))aSyscall[11].pCurrent)
+
+  {"access",        (sqlite3_syscall_ptr)_Access,          0 },
+#define osAccess    ((int(*)(const char*, int))aSyscall[12].pCurrent)
+}; /* End of the overrideable system calls */
+
+/*
+** Do not accept any file descriptor less than this value, in order to avoid
+** opening database file using file descriptors that are commonly used for
+** standard input, output, and error.
+*/
+#ifndef SQLITE_MINIMUM_FILE_DESCRIPTOR
+# define SQLITE_MINIMUM_FILE_DESCRIPTOR 3
+#endif
+
+/*
+** Invoke open().  Do so multiple times, until it either succeeds or
+** fails for some reason other than EINTR.
+**
+** If the file creation mode "m" is 0 then set it to the default for
+** SQLite.  The default is SQLITE_DEFAULT_FILE_PERMISSIONS (normally
+** 0644) as modified by the system umask.  If m is not 0, then
+** make the file creation mode be exactly m ignoring the umask.
+**
+** The m parameter will be non-zero only when creating -wal, -journal,
+** and -shm files.  We want those files to have *exactly* the same
+** permissions as their original database, unadulterated by the umask.
+** In that way, if a database file is -rw-rw-rw or -rw-rw-r-, and a
+** transaction crashes and leaves behind hot journals, then any
+** process that is able to write to the database will also be able to
+** recover the hot journals.
+*/
+static int robust_open(const char *z, int f, mode_t m){
+  int fd;
+  mode_t m2 = m ;
+  while(1){
+#if defined(O_CLOEXEC)
+    fd = osOpen(z,f|O_CLOEXEC,m2);
+#else
+    fd = osOpen(z,f,m2);
+#endif
+    if( fd<0 ){
+      if( errno==EINTR ) continue;
+      break;
+    }
+    if( fd>=SQLITE_MINIMUM_FILE_DESCRIPTOR ) break;
+    osClose(fd);
+    sqlite3_log(SQLITE_WARNING,
+                "attempt to open \"%s\" as file descriptor %d", z, fd);
+    fd = -1;
+    if( osOpen("/dev/null", f, m)<0 ) break;
+  }
+
+  return fd;
+}
+
+/*
+** Open a file descriptor to the directory containing file zFilename.
+** If successful, *pFd is set to the opened file descriptor and
+** SQLITE_OK is returned. If an error occurs, either SQLITE_NOMEM
+** or SQLITE_CANTOPEN is returned and *pFd is set to an undefined
+** value.
+**
+** The directory file descriptor is used for only one thing - to
+** fsync() a directory to make sure file creation and deletion events
+** are flushed to disk.  Such fsyncs are not needed on newer
+** journaling filesystems, but are required on older filesystems.
+**
+** This routine can be overridden using the xSetSysCall interface.
+** The ability to override this routine was added in support of the
+** chromium sandbox.  Opening a directory is a security risk (we are
+** told) so making it overrideable allows the chromium sandbox to
+** replace this routine with a harmless no-op.  To make this routine
+** a no-op, replace it with a stub that returns SQLITE_OK but leaves
+** *pFd set to a negative number.
+**
+** If SQLITE_OK is returned, the caller is responsible for closing
+** the file descriptor *pFd using close().
+*/
+static int openDirectory(const char *zFilename, int *pFd){
+  int ii;
+  int fd = -1;
+  char zDirname[MAX_PATHNAME+1];
+
+  sqlite3_snprintf(MAX_PATHNAME, zDirname, "%s", zFilename);
+  for(ii=(int)strlen(zDirname); ii>1 && zDirname[ii]!='/'; ii--);
+  if( ii>0 ){
+    zDirname[ii] = '\0';
+    fd = robust_open(zDirname, O_RDONLY|O_BINARY, 0);
+    if( fd>=0 ){
+      OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
+    }
+  }
+  *pFd = fd;
+  return (fd>=0?SQLITE_OK:rttLogError(SQLITE_CANTOPEN_BKPT, "open", zDirname));
+}
+
+
+
+/*
+** This is the xSetSystemCall() method of sqlite3_vfs for all of the
+** "win32" VFSes.  Return SQLITE_OK opon successfully updating the
+** system call pointer, or SQLITE_NOTFOUND if there is no configurable
+** system call named zName.
+*/
+static int rttSetSystemCall(
+  sqlite3_vfs *pNotUsed,        /* The VFS pointer.  Not used */
+  const char *zName,            /* Name of system call to override */
+  sqlite3_syscall_ptr pNewFunc  /* Pointer to new system call value */
+){
+  unsigned int i;
+  int rc = SQLITE_NOTFOUND;
+
+  UNUSED_PARAMETER(pNotUsed);
+  if( zName==0 ){
+    /* If no zName is given, restore all system calls to their default
+    ** settings and return NULL
+    */
+    rc = SQLITE_OK;
+    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
+      if( aSyscall[i].pDefault ){
+        aSyscall[i].pCurrent = aSyscall[i].pDefault;
+      }
+    }
+  }else{
+    /* If zName is specified, operate on only the one system call
+    ** specified.
+    */
+    for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
+      if( strcmp(zName, aSyscall[i].zName)==0 ){
+        if( aSyscall[i].pDefault==0 ){
+          aSyscall[i].pDefault = aSyscall[i].pCurrent;
+        }
+        rc = SQLITE_OK;
+        if( pNewFunc==0 ) pNewFunc = aSyscall[i].pDefault;
+        aSyscall[i].pCurrent = pNewFunc;
+        break;
+      }
+    }
+  }
+  return rc;
+}
+
+/*
+** Return the value of a system call.  Return NULL if zName is not a
+** recognized system call name.  NULL is also returned if the system call
+** is currently undefined.
+*/
+static sqlite3_syscall_ptr rttGetSystemCall(
+  sqlite3_vfs *pNotUsed,
+  const char *zName
+){
+  unsigned int i;
+
+  UNUSED_PARAMETER(pNotUsed);
+  for(i=0; i<sizeof(aSyscall)/sizeof(aSyscall[0]); i++){
+    if( strcmp(zName, aSyscall[i].zName)==0 ) return aSyscall[i].pCurrent;
+  }
+  return 0;
+}
+
+/*
+** Return the name of the first system call after zName.  If zName==NULL
+** then return the name of the first system call.  Return NULL if zName
+** is the last system call or if zName is not the name of a valid
+** system call.
+*/
+static const char *rttNextSystemCall(sqlite3_vfs *p, const char *zName){
+  int i = -1;
+
+  UNUSED_PARAMETER(p);
+  if( zName ){
+    for(i=0; i<ArraySize(aSyscall)-1; i++){
+      if( strcmp(zName, aSyscall[i].zName)==0 ) break;
+    }
+  }
+  for(i++; i<ArraySize(aSyscall); i++){
+    if( aSyscall[i].pCurrent!=0 ) return aSyscall[i].zName;
+  }
+  return 0;
+}
+
+/*
+** The following routine suspends the current thread for at least ms
+** milliseconds.  This is equivalent to the Win32 Sleep() interface.
+*/
+void sqlite3_rtt_sleep(int milliseconds){
+    rt_tick_t sleep_tick;
+
+    if (milliseconds <= 0)
+        return;
+
+    sleep_tick = rt_tick_from_millisecond(milliseconds);
+
+    osSleep(sleep_tick);
+}
+
+/*
+** Helper functions to obtain and relinquish the global mutex. The
+** global mutex is used to protect the unixInodeInfo and
+** vxworksFileId objects used by this file, all of which may be
+** shared by multiple threads.
+**
+** Function unixMutexHeld() is used to assert() that the global mutex
+** is held when required. This function is only used as part of assert()
+** statements. e.g.
+**
+**   unixEnterMutex()
+**     assert( unixMutexHeld() );
+**   unixEnterLeave()
+*/
+static void rttEnterMutex(void){
+  sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
+}
+static void rttLeaveMutex(void){
+  sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
+}
+#ifdef SQLITE_DEBUG
+static int rttMutexHeld(void) {
+  return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
+}
+#endif
+
+
+#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
+/*
+** Helper function for printing out trace information from debugging
+** binaries. This returns the string represetation of the supplied
+** integer lock-type.
+*/
+static const char *azFileLock(int eFileLock){
+  switch( eFileLock ){
+    case NO_LOCK: return "NONE";
+    case SHARED_LOCK: return "SHARED";
+    case RESERVED_LOCK: return "RESERVED";
+    case PENDING_LOCK: return "PENDING";
+    case EXCLUSIVE_LOCK: return "EXCLUSIVE";
+  }
+  return "ERROR";
+}
+#endif
+
+/*
+** This routine translates a standard POSIX errno code into something
+** useful to the clients of the sqlite3 functions.  Specifically, it is
+** intended to translate a variety of "try again" errors into SQLITE_BUSY
+** and a variety of "please close the file descriptor NOW" errors into
+** SQLITE_IOERR
+**
+** Errors during initialization of locks, or file system support for locks,
+** should handle ENOLCK, ENOTSUP, EOPNOTSUPP separately.
+*/
+static int sqliteErrorFromPosixError(int posixError, int sqliteIOErr) {
+  switch (posixError) {
+#if 0
+  /* At one point this code was not commented out. In theory, this branch
+  ** should never be hit, as this function should only be called after
+  ** a locking-related function (i.e. fcntl()) has returned non-zero with
+  ** the value of errno as the first argument. Since a system call has failed,
+  ** errno should be non-zero.
+  **
+  ** Despite this, if errno really is zero, we still don't want to return
+  ** SQLITE_OK. The system call failed, and *some* SQLite error should be
+  ** propagated back to the caller. Commenting this branch out means errno==0
+  ** will be handled by the "default:" case below.
+  */
+  case 0:
+    return SQLITE_OK;
+#endif
+
+  case EAGAIN:
+  case ETIMEDOUT:
+  case EBUSY:
+  case EINTR:
+  case ENOLCK:
+    /* random NFS retry error, unless during file system support
+     * introspection, in which it actually means what it says */
+    return SQLITE_BUSY;
+
+  case EACCES:
+    /* EACCES is like EAGAIN during locking operations, but not any other time*/
+    if( (sqliteIOErr == SQLITE_IOERR_LOCK) ||
+        (sqliteIOErr == SQLITE_IOERR_UNLOCK) ||
+        (sqliteIOErr == SQLITE_IOERR_RDLOCK) ||
+        (sqliteIOErr == SQLITE_IOERR_CHECKRESERVEDLOCK) ){
+      return SQLITE_BUSY;
+    }
+    /* else fall through */
+  case EPERM:
+    return SQLITE_PERM;
+
+  /* EDEADLK is only possible if a call to fcntl(F_SETLKW) is made. And
+  ** this module never makes such a call. And the code in SQLite itself
+  ** asserts that SQLITE_IOERR_BLOCKED is never returned. For these reasons
+  ** this case is also commented out. If the system does set errno to EDEADLK,
+  ** the default SQLITE_IOERR_XXX code will be returned. */
+#if 0
+  case EDEADLK:
+    return SQLITE_IOERR_BLOCKED;
+#endif
+
+#if EOPNOTSUPP!=ENOTSUP
+  case EOPNOTSUPP:
+    /* something went terribly awry, unless during file system support
+     * introspection, in which it actually means what it says */
+#endif
+#ifdef ENOTSUP
+  case ENOTSUP:
+    /* invalid fd, unless during file system support introspection, in which
+     * it actually means what it says */
+#endif
+  case EIO:
+  case EBADF:
+  case EINVAL:
+  case ENOTCONN:
+  case ENODEV:
+  case ENXIO:
+  case ENOENT:
+#ifdef ESTALE                     /* ESTALE is not defined on Interix systems */
+  case ESTALE:
+#endif
+  case ENOSYS:
+    /* these should force the client to close the file and reconnect */
+
+  default:
+    return sqliteIOErr;
+  }
+}
+
+/*
+**
+** This function - unixLogError_x(), is only ever called via the macro
+** unixLogError().
+**
+** It is invoked after an error occurs in an OS function and errno has been
+** set. It logs a message using sqlite3_log() containing the current value of
+** errno and, if possible, the human-readable equivalent from strerror() or
+** strerror_r().
+**
+** The first argument passed to the macro should be the error code that
+** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN).
+** The two subsequent arguments should be the name of the OS function that
+** failed (e.g. "unlink", "open") and the associated file-system path,
+** if any.
+*/
+#define rttLogError(a,b,c)     rttLogErrorAtLine(a,b,c,__LINE__)
+static int rttLogErrorAtLine(
+  int errcode,                    /* SQLite error code */
+  const char *zFunc,              /* Name of OS function that failed */
+  const char *zPath,              /* File path associated with error */
+  int iLine                       /* Source line number where error occurred */
+){
+  char *zErr;                     /* Message from strerror() or equivalent */
+  int iErrno = errno;             /* Saved syscall error number */
+
+  /* If this is not a threadsafe build (SQLITE_THREADSAFE==0), then use
+  ** the strerror() function to obtain the human-readable error message
+  ** equivalent to errno. Otherwise, use strerror_r().
+  */
+#if SQLITE_THREADSAFE && defined(HAVE_STRERROR_R)
+  char aErr[80];
+  memset(aErr, 0, sizeof(aErr));
+  zErr = aErr;
+
+  /* If STRERROR_R_CHAR_P (set by autoconf scripts) or __USE_GNU is defined,
+  ** assume that the system provides the GNU version of strerror_r() that
+  ** returns a pointer to a buffer containing the error message. That pointer
+  ** may point to aErr[], or it may point to some static storage somewhere.
+  ** Otherwise, assume that the system provides the POSIX version of
+  ** strerror_r(), which always writes an error message into aErr[].
+  **
+  ** If the code incorrectly assumes that it is the POSIX version that is
+  ** available, the error message will often be an empty string. Not a
+  ** huge problem. Incorrectly concluding that the GNU version is available
+  ** could lead to a segfault though.
+  */
+#if defined(STRERROR_R_CHAR_P) || defined(__USE_GNU)
+  zErr =
+# endif
+  strerror_r(iErrno, aErr, sizeof(aErr)-1);
+
+#elif SQLITE_THREADSAFE
+  /* This is a threadsafe build, but strerror_r() is not available. */
+  zErr = "";
+#else
+  /* Non-threadsafe build, use strerror(). */
+  zErr = strerror(iErrno);
+#endif
+
+  if( zPath==0 ) zPath = "";
+  sqlite3_log(errcode,
+      "os_rtt.c:%d: (%d) %s(%s) - %s",
+      iLine, iErrno, zFunc, zPath, zErr
+  );
+
+  return errcode;
+}
+
+static int robust_ftruncate(int h, sqlite3_int64 sz){
+  int rc;
+  rc = -1;
+  return rc;
+}
+
+/*
+** Close a file descriptor.
+**
+** We assume that close() almost always works, since it is only in a
+** very sick application or on a very sick platform that it might fail.
+** If it does fail, simply leak the file descriptor, but do log the
+** error.
+**
+** Note that it is not safe to retry close() after EINTR since the
+** file descriptor might have already been reused by another thread.
+** So we don't even try to recover from an EINTR.  Just log the error
+** and move on.
+*/
+static void robust_close(rttFile *pFile, int h, int lineno){
+  if( osClose(h) ){
+    rttLogErrorAtLine(SQLITE_IOERR_CLOSE, "close",
+                       pFile ? pFile->zPath : 0, lineno);
+  }
+}
+
+/*
+** Check a rttFile that is a database.  Verify the following:
+**
+** (1) There is exactly one hard link on the file
+** (2) The file is not a symbolic link
+** (3) The file has not been renamed or unlinked
+**
+** Issue sqlite3_log(SQLITE_WARNING,...) messages if anything is not right.
+*/
+static void verifyDbFile(rttFile *pFile){
+  struct stat buf;
+  int rc;
+  if( pFile->ctrlFlags & UNIXFILE_WARNED ){
+    /* One or more of the following warnings have already been issued.  Do not
+    ** repeat them so as not to clutter the error log */
+    return;
+  }
+  rc = osFstat(pFile->h, &buf);
+  if( rc!=0 ){
+    sqlite3_log(SQLITE_WARNING, "cannot fstat db file %s", pFile->zPath);
+    pFile->ctrlFlags |= UNIXFILE_WARNED;
+    return;
+  }
+  if( buf.st_nlink==0 && (pFile->ctrlFlags & UNIXFILE_DELETE)==0 ){
+    sqlite3_log(SQLITE_WARNING, "file unlinked while open: %s", pFile->zPath);
+    pFile->ctrlFlags |= UNIXFILE_WARNED;
+    return;
+  }
+}
+
+/*
+** This function performs the parts of the "close file" operation
+** common to all locking schemes. It closes the directory and file
+** handles, if they are valid, and sets all fields of the rttFile
+** structure to 0.
+**
+** It is *not* necessary to hold the mutex when this routine is called,
+** even on VxWorks.  A mutex will be acquired on VxWorks by the
+** vxworksReleaseFileId() routine.
+*/
+static int closeRttFile(sqlite3_file *id){
+  rttFile *pFile = (rttFile*)id;
+  if( pFile->h>=0 ){
+    robust_close(pFile, pFile->h, __LINE__);
+    pFile->h = -1;
+  }
+  OSTRACE(("CLOSE   %-3d\n", pFile->h));
+  OpenCounter(-1);
+  memset(pFile, 0, sizeof(rttFile));
+  return SQLITE_OK;
+}
+
+/************** End of the posix advisory lock implementation *****************
+******************************************************************************/
+
+/******************************************************************************
+****************************** No-op Locking **********************************
+**
+** Of the various locking implementations available, this is by far the
+** simplest:  locking is ignored.  No attempt is made to lock the database
+** file for reading or writing.
+**
+** This locking mode is appropriate for use on read-only databases
+** (ex: databases that are burned into CD-ROM, for example.)  It can
+** also be used if the application employs some external mechanism to
+** prevent simultaneous access of the same database by two or more
+** database connections.  But there is a serious risk of database
+** corruption if this locking mode is used in situations where multiple
+** database connections are accessing the same database file at the same
+** time and one or more of those connections are writing.
+*/
+
+static int nolockCheckReservedLock(sqlite3_file *NotUsed, int *pResOut){
+  UNUSED_PARAMETER(NotUsed);
+  *pResOut = 0;
+  return SQLITE_OK;
+}
+static int nolockLock(sqlite3_file *NotUsed, int NotUsed2){
+  UNUSED_PARAMETER2(NotUsed, NotUsed2);
+  return SQLITE_OK;
+}
+static int nolockUnlock(sqlite3_file *NotUsed, int NotUsed2){
+  UNUSED_PARAMETER2(NotUsed, NotUsed2);
+  return SQLITE_OK;
+}
+
+/*
+** Close the file.
+*/
+static int nolockClose(sqlite3_file *id) {
+  return closeRttFile(id);
+}
+
+/******************* End of the no-op lock implementation *********************
+******************************************************************************/
+
+/******************************************************************************
+************************* Begin dot-file Locking ******************************
+**
+** The dotfile locking implementation uses the existence of separate lock
+** files (really a directory) to control access to the database.  This works
+** on just about every filesystem imaginable.  But there are serious downsides:
+**
+**    (1)  There is zero concurrency.  A single reader blocks all other
+**         connections from reading or writing the database.
+**
+**    (2)  An application crash or power loss can leave stale lock files
+**         sitting around that need to be cleared manually.
+**
+** Nevertheless, a dotlock is an appropriate locking mode for use if no
+** other locking strategy is available.
+**
+** Dotfile locking works by creating a subdirectory in the same directory as
+** the database and with the same name but with a ".lock" extension added.
+** The existence of a lock directory implies an EXCLUSIVE lock.  All other
+** lock types (SHARED, RESERVED, PENDING) are mapped into EXCLUSIVE.
+*/
+
+/*
+** The file suffix added to the data base filename in order to create the
+** lock directory.
+*/
+#define DOTLOCK_SUFFIX ".lock"
+
+/*
+** This routine checks if there is a RESERVED lock held on the specified
+** file by this or any other process. If such a lock is held, set *pResOut
+** to a non-zero value otherwise *pResOut is set to zero.  The return value
+** is set to SQLITE_OK unless an I/O error occurs during lock checking.
+**
+** In dotfile locking, either a lock exists or it does not.  So in this
+** variation of CheckReservedLock(), *pResOut is set to true if any lock
+** is held on the file and false if the file is unlocked.
+*/
+static int dotlockCheckReservedLock(sqlite3_file *id, int *pResOut) {
+  int rc = SQLITE_OK;
+  int reserved = 0;
+  rttFile *pFile = (rttFile*)id;
+
+  SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
+
+  assert( pFile );
+
+  /* Check if a thread in this process holds such a lock */
+  if( pFile->eFileLock>SHARED_LOCK ){
+    /* Either this connection or some other connection in the same process
+    ** holds a lock on the file.  No need to check further. */
+    reserved = 1;
+  }else{
+    /* The lock is held if and only if the lockfile exists */
+    const char *zLockFile = (const char*)pFile->lockingContext;
+    reserved = 0;
+  }
+  OSTRACE(("TEST WR-LOCK %d %d %d (dotlock)\n", pFile->h, rc, reserved));
+  *pResOut = reserved;
+  return rc;
+}
+
+/*
+** Lock the file with the lock specified by parameter eFileLock - one
+** of the following:
+**
+**     (1) SHARED_LOCK
+**     (2) RESERVED_LOCK
+**     (3) PENDING_LOCK
+**     (4) EXCLUSIVE_LOCK
+**
+** Sometimes when requesting one lock state, additional lock states
+** are inserted in between.  The locking might fail on one of the later
+** transitions leaving the lock state different from what it started but
+** still short of its goal.  The following chart shows the allowed
+** transitions and the inserted intermediate states:
+**
+**    UNLOCKED -> SHARED
+**    SHARED -> RESERVED
+**    SHARED -> (PENDING) -> EXCLUSIVE
+**    RESERVED -> (PENDING) -> EXCLUSIVE
+**    PENDING -> EXCLUSIVE
+**
+** This routine will only increase a lock.  Use the sqlite3OsUnlock()
+** routine to lower a locking level.
+**
+** With dotfile locking, we really only support state (4): EXCLUSIVE.
+** But we track the other locking levels internally.
+*/
+static int dotlockLock(sqlite3_file *id, int eFileLock) {
+  rttFile *pFile = (rttFile*)id;
+  char *zLockFile = (char *)pFile->lockingContext;
+  int rc = SQLITE_OK;
+
+
+  /* If we have any lock, then the lock file already exists.  All we have
+  ** to do is adjust our internal record of the lock level.
+  */
+  if( pFile->eFileLock > NO_LOCK ){
+    pFile->eFileLock = eFileLock;
+    return SQLITE_OK;
+  }
+
+  /* grab an exclusive lock */
+  rc = osMkdir(zLockFile, 0777);
+  if( rc<0 ){
+    /* failed to open/create the lock directory */
+    int tErrno = errno;
+    if( EEXIST == tErrno ){
+      rc = SQLITE_BUSY;
+    } else {
+      rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
+      if( IS_LOCK_ERROR(rc) ){
+        pFile->lastErrno = tErrno;
+      }
+    }
+    return rc;
+  }
+
+  /* got it, set the type and return ok */
+  pFile->eFileLock = eFileLock;
+  return rc;
+}
+
+/*
+** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
+** must be either NO_LOCK or SHARED_LOCK.
+**
+** If the locking level of the file descriptor is already at or below
+** the requested locking level, this routine is a no-op.
+**
+** When the locking level reaches NO_LOCK, delete the lock file.
+*/
+static int dotlockUnlock(sqlite3_file *id, int eFileLock) {
+  rttFile *pFile = (rttFile*)id;
+  char *zLockFile = (char *)pFile->lockingContext;
+  int rc;
+
+  assert( pFile );
+  OSTRACE(("UNLOCK  %d %d was %d tnm=%s (dotlock)\n", pFile->h, eFileLock,
+           pFile->eFileLock, rt_thread_self()->name ));
+  assert( eFileLock<=SHARED_LOCK );
+
+  /* no-op if possible */
+  if( pFile->eFileLock==eFileLock ){
+    return SQLITE_OK;
+  }
+
+  /* To downgrade to shared, simply update our internal notion of the
+  ** lock state.  No need to mess with the file on disk.
+  */
+  if( eFileLock==SHARED_LOCK ){
+    pFile->eFileLock = SHARED_LOCK;
+    return SQLITE_OK;
+  }
+
+  /* To fully unlock the database, delete the lock file */
+  assert( eFileLock==NO_LOCK );
+  rc = osRmdir(zLockFile);
+  if( rc<0 && errno==ENOTDIR ) rc = osUnlink(zLockFile);
+  if( rc<0 ){
+    int tErrno = errno;
+    rc = 0;
+    if( ENOENT != tErrno ){
+      rc = SQLITE_IOERR_UNLOCK;
+    }
+    if( IS_LOCK_ERROR(rc) ){
+      pFile->lastErrno = tErrno;
+    }
+    return rc;
+  }
+  pFile->eFileLock = NO_LOCK;
+  return SQLITE_OK;
+}
+
+/*
+** Close a file.  Make sure the lock has been released before closing.
+*/
+static int dotlockClose(sqlite3_file *id) {
+  int rc = SQLITE_OK;
+  if( id ){
+    rttFile *pFile = (rttFile*)id;
+    dotlockUnlock(id, NO_LOCK);
+    sqlite3_free(pFile->lockingContext);
+    rc = closeRttFile(id);
+  }
+  return rc;
+}
+/****************** End of the dot-file lock implementation *******************
+******************************************************************************/
+
+/******************************************************************************
+************************** Begin flock Locking ********************************
+**
+** Use the flock() system call to do file locking.
+**
+** flock() locking is like dot-file locking in that the various
+** fine-grain locking levels supported by SQLite are collapsed into
+** a single exclusive lock.  In other words, SHARED, RESERVED, and
+** PENDING locks are the same thing as an EXCLUSIVE lock.  SQLite
+** still works when you do this, but concurrency is reduced since
+** only a single process can be reading the database at a time.
+**
+** Omit this section if SQLITE_ENABLE_LOCKING_STYLE is turned off or if
+** compiling for VXWORKS.
+*/
+#if SQLITE_ENABLE_LOCKING_STYLE
+#warning "rtt file lock not available"
+/*
+** Retry flock() calls that fail with EINTR
+*/
+static int robust_flock(int fd, int op){
+  int rc = 0;
+
+  return rc;
+}
+
+/*
+** This routine checks if there is a RESERVED lock held on the specified
+** file by this or any other process. If such a lock is held, set *pResOut
+** to a non-zero value otherwise *pResOut is set to zero.  The return value
+** is set to SQLITE_OK unless an I/O error occurs during lock checking.
+*/
+static int flockCheckReservedLock(sqlite3_file *id, int *pResOut){
+  int rc = SQLITE_OK;
+  int reserved = 0;
+  rttFile *pFile = (rttFile*)id;
+
+  SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
+
+  assert( pFile );
+
+  /* Check if a thread in this process holds such a lock */
+  if( pFile->eFileLock>SHARED_LOCK ){
+    reserved = 1;
+  }
+
+  /* Otherwise see if some other process holds it. */
+  if( !reserved ){
+    /* attempt to get the lock */
+    int lrc = robust_flock(pFile->h, LOCK_EX | LOCK_NB);
+    if( !lrc ){
+      /* got the lock, unlock it */
+      lrc = robust_flock(pFile->h, LOCK_UN);
+      if ( lrc ) {
+        int tErrno = errno;
+        /* unlock failed with an error */
+        lrc = SQLITE_IOERR_UNLOCK;
+        if( IS_LOCK_ERROR(lrc) ){
+          pFile->lastErrno = tErrno;
+          rc = lrc;
+        }
+      }
+    } else {
+      int tErrno = errno;
+      reserved = 1;
+      /* someone else might have it reserved */
+      lrc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
+      if( IS_LOCK_ERROR(lrc) ){
+        pFile->lastErrno = tErrno;
+        rc = lrc;
+      }
+    }
+  }
+  OSTRACE(("TEST WR-LOCK %d %d %d (flock)\n", pFile->h, rc, reserved));
+
+#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
+  if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
+    rc = SQLITE_OK;
+    reserved=1;
+  }
+#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
+  *pResOut = reserved;
+  return rc;
+}
+
+/*
+** Lock the file with the lock specified by parameter eFileLock - one
+** of the following:
+**
+**     (1) SHARED_LOCK
+**     (2) RESERVED_LOCK
+**     (3) PENDING_LOCK
+**     (4) EXCLUSIVE_LOCK
+**
+** Sometimes when requesting one lock state, additional lock states
+** are inserted in between.  The locking might fail on one of the later
+** transitions leaving the lock state different from what it started but
+** still short of its goal.  The following chart shows the allowed
+** transitions and the inserted intermediate states:
+**
+**    UNLOCKED -> SHARED
+**    SHARED -> RESERVED
+**    SHARED -> (PENDING) -> EXCLUSIVE
+**    RESERVED -> (PENDING) -> EXCLUSIVE
+**    PENDING -> EXCLUSIVE
+**
+** flock() only really support EXCLUSIVE locks.  We track intermediate
+** lock states in the sqlite3_file structure, but all locks SHARED or
+** above are really EXCLUSIVE locks and exclude all other processes from
+** access the file.
+**
+** This routine will only increase a lock.  Use the sqlite3OsUnlock()
+** routine to lower a locking level.
+*/
+static int flockLock(sqlite3_file *id, int eFileLock) {
+  int rc = SQLITE_OK;
+  rttFile *pFile = (rttFile*)id;
+
+  assert( pFile );
+
+  /* if we already have a lock, it is exclusive.
+  ** Just adjust level and punt on outta here. */
+  if (pFile->eFileLock > NO_LOCK) {
+    pFile->eFileLock = eFileLock;
+    return SQLITE_OK;
+  }
+
+  /* grab an exclusive lock */
+
+  if (robust_flock(pFile->h, LOCK_EX | LOCK_NB)) {
+    int tErrno = errno;
+    /* didn't get, must be busy */
+    rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
+    if( IS_LOCK_ERROR(rc) ){
+      pFile->lastErrno = tErrno;
+    }
+  } else {
+    /* got it, set the type and return ok */
+    pFile->eFileLock = eFileLock;
+  }
+  OSTRACE(("LOCK    %d %s %s (flock)\n", pFile->h, azFileLock(eFileLock),
+           rc==SQLITE_OK ? "ok" : "failed"));
+#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
+  if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
+    rc = SQLITE_BUSY;
+  }
+#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
+  return rc;
+}
+
+
+/*
+** Lower the locking level on file descriptor pFile to eFileLock.  eFileLock
+** must be either NO_LOCK or SHARED_LOCK.
+**
+** If the locking level of the file descriptor is already at or below
+** the requested locking level, this routine is a no-op.
+*/
+static int flockUnlock(sqlite3_file *id, int eFileLock) {
+  rttFile *pFile = (rttFile*)id;
+
+  assert( pFile );
+  OSTRACE(("UNLOCK  %d %d was %d tnm=%s (flock)\n", pFile->h, eFileLock,
+           pFile->eFileLock, rt_thread_self()->name));
+  assert( eFileLock<=SHARED_LOCK );
+
+  /* no-op if possible */
+  if( pFile->eFileLock==eFileLock ){
+    return SQLITE_OK;
+  }
+
+  /* shared can just be set because we always have an exclusive */
+  if (eFileLock==SHARED_LOCK) {
+    pFile->eFileLock = eFileLock;
+    return SQLITE_OK;
+  }
+
+  /* no, really, unlock. */
+  if( robust_flock(pFile->h, LOCK_UN) ){
+#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
+    return SQLITE_OK;
+#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
+    return SQLITE_IOERR_UNLOCK;
+  }else{
+    pFile->eFileLock = NO_LOCK;
+    return SQLITE_OK;
+  }
+}
+
+/*
+** Close a file.
+*/
+static int flockClose(sqlite3_file *id) {
+  int rc = SQLITE_OK;
+  if( id ){
+    flockUnlock(id, NO_LOCK);
+    rc = closeRttFile(id);
+  }
+  return rc;
+}
+
+#endif /* SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORK */
+
+/******************* End of the flock lock implementation *********************
+******************************************************************************/
+
+/******************************************************************************
+**************** Non-locking sqlite3_file methods *****************************
+**
+** The next division contains implementations for all methods of the
+** sqlite3_file object other than the locking methods.  The locking
+** methods were defined in divisions above (one locking method per
+** division).  Those methods that are common to all locking modes
+** are gather together into this division.
+*/
+
+/*
+** Seek to the offset passed as the second argument, then read cnt
+** bytes into pBuf. Return the number of bytes actually read.
+**
+** NB:  If you define USE_PREAD or USE_PREAD64, then it might also
+** be necessary to define _XOPEN_SOURCE to be 500.  This varies from
+** one system to another.  Since SQLite does not define USE_PREAD
+** any any form by default, we will not attempt to define _XOPEN_SOURCE.
+** See tickets #2741 and #2681.
+**
+** To avoid stomping the errno value on a failed read the lastErrno value
+** is set before returning.
+*/
+static int seekAndRead(rttFile *id, sqlite3_int64 offset, void *pBuf, int cnt){
+  int got;
+  int prior = 0;
+#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
+  i64 newOffset;
+#endif
+  TIMER_START;
+  assert( cnt==(cnt&0x1ffff) );
+  assert( id->h>2 );
+  cnt &= 0x1ffff;
+  do{
+#if defined(USE_PREAD)
+    #error "rtt pread not support"
+    got = osPread(id->h, pBuf, cnt, offset);
+    SimulateIOError( got = -1 );
+#elif defined(USE_PREAD64)
+    #error "rtt pread64 not support"
+    got = osPread64(id->h, pBuf, cnt, offset);
+    SimulateIOError( got = -1 );
+#else
+    newOffset = lseek(id->h, offset, SEEK_SET);
+    SimulateIOError( newOffset-- );
+    if( newOffset!=offset ){
+      if( newOffset == -1 ){
+        ((rttFile*)id)->lastErrno = errno;
+      }else{
+        ((rttFile*)id)->lastErrno = 0;
+      }
+      return -1;
+    }
+    got = osRead(id->h, pBuf, cnt);
+#endif
+    if( got==cnt ) break;
+    if( got<0 ){
+      if( errno==EINTR ){ got = 1; continue; }
+      prior = 0;
+      ((rttFile*)id)->lastErrno = errno;
+      break;
+    }else if( got>0 ){
+      cnt -= got;
+      offset += got;
+      prior += got;
+      pBuf = (void*)(got + (char*)pBuf);
+    }
+  }while( got>0 );
+  TIMER_END;
+  OSTRACE(("READ    %-3d %5d %7lld %llu\n",
+            id->h, got+prior, offset-prior, TIMER_ELAPSED));
+  return got+prior;
+}
+
+/*
+** Read data from a file into a buffer.  Return SQLITE_OK if all
+** bytes were read successfully and SQLITE_IOERR if anything goes
+** wrong.
+*/
+static int rttRead(
+  sqlite3_file *id,
+  void *pBuf,
+  int amt,
+  sqlite3_int64 offset
+){
+  rttFile *pFile = (rttFile *)id;
+  int got;
+  assert( id );
+  assert( offset>=0 );
+  assert( amt>0 );
+
+  got = seekAndRead(pFile, offset, pBuf, amt);
+  if( got==amt ){
+    return SQLITE_OK;
+  }else if( got<0 ){
+    /* lastErrno set by seekAndRead */
+    return SQLITE_IOERR_READ;
+  }else{
+    pFile->lastErrno = 0; /* not a system error */
+    /* Unread parts of the buffer must be zero-filled */
+    memset(&((char*)pBuf)[got], 0, amt-got);
+    return SQLITE_IOERR_SHORT_READ;
+  }
+}
+
+/*
+** Attempt to seek the file-descriptor passed as the first argument to
+** absolute offset iOff, then attempt to write nBuf bytes of data from
+** pBuf to it. If an error occurs, return -1 and set *piErrno. Otherwise,
+** return the actual number of bytes written (which may be less than
+** nBuf).
+*/
+static int seekAndWriteFd(
+  int fd,                         /* File descriptor to write to */
+  i64 iOff,                       /* File offset to begin writing at */
+  const void *pBuf,               /* Copy data from this buffer to the file */
+  int nBuf,                       /* Size of buffer pBuf in bytes */
+  int *piErrno                    /* OUT: Error number if error occurs */
+){
+  int rc = 0;                     /* Value returned by system call */
+
+  assert( nBuf==(nBuf&0x1ffff) );
+  assert( fd>2 );
+  nBuf &= 0x1ffff;
+  TIMER_START;
+
+#if defined(USE_PREAD)
+  do{ rc = osPwrite(fd, pBuf, nBuf, iOff); }while( rc<0 && errno==EINTR );
+#elif defined(USE_PREAD64)
+  do{ rc = osPwrite64(fd, pBuf, nBuf, iOff);}while( rc<0 && errno==EINTR);
+#else
+  do{
+    i64 iSeek = lseek(fd, iOff, SEEK_SET);
+    SimulateIOError( iSeek-- );
+
+    if( iSeek!=iOff ){
+      if( piErrno ) *piErrno = (iSeek==-1 ? errno : 0);
+      return -1;
+    }
+    rc = osWrite(fd, pBuf, nBuf);
+  }while( rc<0 && errno==EINTR );
+#endif
+
+  TIMER_END;
+  OSTRACE(("WRITE   %-3d %5d %7lld %llu\n", fd, rc, iOff, TIMER_ELAPSED));
+
+  if( rc<0 && piErrno ) *piErrno = errno;
+  return rc;
+}
+
+
+/*
+** Seek to the offset in id->offset then read cnt bytes into pBuf.
+** Return the number of bytes actually read.  Update the offset.
+**
+** To avoid stomping the errno value on a failed write the lastErrno value
+** is set before returning.
+*/
+static int seekAndWrite(rttFile *id, i64 offset, const void *pBuf, int cnt){
+  return seekAndWriteFd(id->h, offset, pBuf, cnt, &id->lastErrno);
+}
+
+
+/*
+** Write data from a buffer into a file.  Return SQLITE_OK on success
+** or some other error code on failure.
+*/
+static int rttWrite(
+  sqlite3_file *id,
+  const void *pBuf,
+  int amt,
+  sqlite3_int64 offset
+){
+  rttFile *pFile = (rttFile*)id;
+  int wrote = 0;
+  assert( id );
+  assert( amt>0 );
+
+#ifdef SQLITE_DEBUG
+  /* If we are doing a normal write to a database file (as opposed to
+  ** doing a hot-journal rollback or a write to some file other than a
+  ** normal database file) then record the fact that the database
+  ** has changed.  If the transaction counter is modified, record that
+  ** fact too.
+  */
+  if( pFile->inNormalWrite ){
+    pFile->dbUpdate = 1;  /* The database has been modified */
+    if( offset<=24 && offset+amt>=27 ){
+      int rc;
+      char oldCntr[4];
+      SimulateIOErrorBenign(1);
+      rc = seekAndRead(pFile, 24, oldCntr, 4);
+      SimulateIOErrorBenign(0);
+      if( rc!=4 || memcmp(oldCntr, &((char*)pBuf)[24-offset], 4)!=0 ){
+        pFile->transCntrChng = 1;  /* The transaction counter has changed */
+      }
+    }
+  }
+#endif
+
+  while( amt>0 && (wrote = seekAndWrite(pFile, offset, pBuf, amt))>0 ){
+    amt -= wrote;
+    offset += wrote;
+    pBuf = &((char*)pBuf)[wrote];
+  }
+  SimulateIOError(( wrote=(-1), amt=1 ));
+  SimulateDiskfullError(( wrote=0, amt=1 ));
+
+  if( amt>0 ){
+    if( wrote<0 && pFile->lastErrno!=ENOSPC ){
+      /* lastErrno set by seekAndWrite */
+      return SQLITE_IOERR_WRITE;
+    }else{
+      pFile->lastErrno = 0; /* not a system error */
+      return SQLITE_FULL;
+    }
+  }
+
+  return SQLITE_OK;
+}
+
+#ifdef SQLITE_TEST
+/*
+** Count the number of fullsyncs and normal syncs.  This is used to test
+** that syncs and fullsyncs are occurring at the right times.
+*/
+int sqlite3_sync_count = 0;
+int sqlite3_fullsync_count = 0;
+#endif
+
+/*
+** We do not trust systems to provide a working fdatasync().  Some do.
+** Others do no.  To be safe, we will stick with the (slightly slower)
+** fsync(). If you know that your system does support fdatasync() correctly,
+** then simply compile with -Dfdatasync=fdatasync
+*/
+#if !defined(fdatasync)
+#include "dfs.h"
+#include "dfs_file.h"
+int fdatasync(fd)
+{
+    struct dfs_fd *dfs_fd;
+    dfs_fd = fd_get(fd);
+    return dfs_file_flush(dfs_fd);
+}
+#endif
+
+/*
+** Define HAVE_FULLFSYNC to 0 or 1 depending on whether or not
+** the F_FULLFSYNC macro is defined.  F_FULLFSYNC is currently
+** only available on Mac OS X.  But that could change.
+*/
+#ifdef F_FULLFSYNC
+# define HAVE_FULLFSYNC 0
+#endif
+
+
+/*
+** The fsync() system call does not work as advertised on many
+** unix systems.  The following procedure is an attempt to make
+** it work better.
+**
+** The SQLITE_NO_SYNC macro disables all fsync()s.  This is useful
+** for testing when we want to run through the test suite quickly.
+** You are strongly advised *not* to deploy with SQLITE_NO_SYNC
+** enabled, however, since with SQLITE_NO_SYNC enabled, an OS crash
+** or power failure will likely corrupt the database file.
+**
+** SQLite sets the dataOnly flag if the size of the file is unchanged.
+** The idea behind dataOnly is that it should only write the file content
+** to disk, not the inode.  We only set dataOnly if the file size is
+** unchanged since the file size is part of the inode.  However,
+** Ted Ts'o tells us that fdatasync() will also write the inode if the
+** file size has changed.  The only real difference between fdatasync()
+** and fsync(), Ted tells us, is that fdatasync() will not flush the
+** inode if the mtime or owner or other inode attributes have changed.
+** We only care about the file size, not the other file attributes, so
+** as far as SQLite is concerned, an fdatasync() is always adequate.
+** So, we always use fdatasync() if it is available, regardless of
+** the value of the dataOnly flag.
+*/
+static int full_fsync(int fd, int fullSync, int dataOnly){
+  int rc;
+
+  /* The following "ifdef/elif/else/" block has the same structure as
+  ** the one below. It is replicated here solely to avoid cluttering
+  ** up the real code with the UNUSED_PARAMETER() macros.
+  */
+#ifdef SQLITE_NO_SYNC
+  UNUSED_PARAMETER(fd);
+  UNUSED_PARAMETER(fullSync);
+  UNUSED_PARAMETER(dataOnly);
+#elif HAVE_FULLFSYNC
+  UNUSED_PARAMETER(dataOnly);
+#else
+  UNUSED_PARAMETER(fullSync);
+  UNUSED_PARAMETER(dataOnly);
+#endif
+
+  /* Record the number of times that we do a normal fsync() and
+  ** FULLSYNC.  This is used during testing to verify that this procedure
+  ** gets called with the correct arguments.
+  */
+#ifdef SQLITE_TEST
+  if( fullSync ) sqlite3_fullsync_count++;
+  sqlite3_sync_count++;
+#endif
+
+  /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
+  ** no-op
+  */
+#ifdef SQLITE_NO_SYNC
+  rc = SQLITE_OK;
+#elif HAVE_FULLFSYNC
+  #error "rtt not support FULLFSYNC"
+#else
+  rc = fdatasync(fd);
+#endif /* ifdef SQLITE_NO_SYNC elif HAVE_FULLFSYNC */
+
+  return rc;
+}
+
+/*
+** Make sure all writes to a particular file are committed to disk.
+**
+** If dataOnly==0 then both the file itself and its metadata (file
+** size, access time, etc) are synced.  If dataOnly!=0 then only the
+** file data is synced.
+**
+** Under Rtt, also make sure that the directory entry for the file
+** has been created by fsync-ing the directory that contains the file.
+** If we do not do this and we encounter a power failure, the directory
+** entry for the journal might not exist after we reboot.  The next
+** SQLite to access the file will not know that the journal exists (because
+** the directory entry for the journal was never created) and the transaction
+** will not roll back - possibly leading to database corruption.
+*/
+static int rttSync(sqlite3_file *id, int flags){
+  int rc;
+  rttFile *pFile = (rttFile*)id;
+
+  int isDataOnly = (flags&SQLITE_SYNC_DATAONLY);
+  int isFullsync = (flags&0x0F)==SQLITE_SYNC_FULL;
+
+  /* Check that one of SQLITE_SYNC_NORMAL or FULL was passed */
+  assert((flags&0x0F)==SQLITE_SYNC_NORMAL
+      || (flags&0x0F)==SQLITE_SYNC_FULL
+  );
+
+  /* Rtt cannot, but some systems may return SQLITE_FULL from here. This
+  ** line is to test that doing so does not cause any problems.
+  */
+  SimulateDiskfullError( return SQLITE_FULL );
+
+  assert( pFile );
+  OSTRACE(("SYNC    %-3d\n", pFile->h));
+  rc = full_fsync(pFile->h, isFullsync, isDataOnly);
+  SimulateIOError( rc=1 );
+  if( rc ){
+    pFile->lastErrno = errno;
+    return rttLogError(SQLITE_IOERR_FSYNC, "full_fsync", pFile->zPath);
+  }
+
+  /* Also fsync the directory containing the file if the DIRSYNC flag
+  ** is set.  This is a one-time occurrence.  Many systems (examples: AIX)
+  ** are unable to fsync a directory, so ignore errors on the fsync.
+  */
+  if( pFile->ctrlFlags & UNIXFILE_DIRSYNC ){
+    int dirfd;
+    OSTRACE(("DIRSYNC %s (have_fullfsync=%d fullsync=%d)\n", pFile->zPath,
+            HAVE_FULLFSYNC, isFullsync));
+    rc = osOpenDirectory(pFile->zPath, &dirfd);
+    if( rc==SQLITE_OK && dirfd>=0 ){
+      full_fsync(dirfd, 0, 0);
+      robust_close(pFile, dirfd, __LINE__);
+    }else if( rc==SQLITE_CANTOPEN ){
+      rc = SQLITE_OK;
+    }
+    pFile->ctrlFlags &= ~UNIXFILE_DIRSYNC;
+  }
+  return rc;
+}
+
+/*
+** Truncate an open file to a specified size
+*/
+static int rttTruncate(sqlite3_file *id, i64 nByte){
+  rttFile *pFile = (rttFile *)id;
+  int rc;
+  assert( pFile );
+  SimulateIOError( return SQLITE_IOERR_TRUNCATE );
+
+  /* If the user has configured a chunk-size for this file, truncate the
+  ** file so that it consists of an integer number of chunks (i.e. the
+  ** actual file size after the operation may be larger than the requested
+  ** size).
+  */
+  if( pFile->szChunk>0 ){
+    nByte = ((nByte + pFile->szChunk - 1)/pFile->szChunk) * pFile->szChunk;
+  }
+
+  rc = robust_ftruncate(pFile->h, (off_t)nByte);
+  if( rc ){
+    pFile->lastErrno = errno;
+    return rttLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath);
+  }else{
+#ifdef SQLITE_DEBUG
+    /* If we are doing a normal write to a database file (as opposed to
+    ** doing a hot-journal rollback or a write to some file other than a
+    ** normal database file) and we truncate the file to zero length,
+    ** that effectively updates the change counter.  This might happen
+    ** when restoring a database using the backup API from a zero-length
+    ** source.
+    */
+    if( pFile->inNormalWrite && nByte==0 ){
+      pFile->transCntrChng = 1;
+    }
+#endif
+
+    return SQLITE_OK;
+  }
+}
+
+/*
+** Determine the current size of a file in bytes
+*/
+static int rttFileSize(sqlite3_file *id, i64 *pSize){
+  int rc;
+  struct stat buf;
+  assert( id );
+  rc = osFstat(((rttFile*)id)->h, &buf);
+  SimulateIOError( rc=1 );
+  if( rc!=0 ){
+    ((rttFile*)id)->lastErrno = errno;
+    return SQLITE_IOERR_FSTAT;
+  }
+  *pSize = buf.st_size;
+
+  /* When opening a zero-size database, the findInodeInfo() procedure
+  ** writes a single byte into that file in order to work around a bug
+  ** in the OS-X msdos filesystem.  In order to avoid problems with upper
+  ** layers, we need to report this file size as zero even though it is
+  ** really 1.   Ticket #3260.
+  */
+  if( *pSize==1 ) *pSize = 0;
+
+
+  return SQLITE_OK;
+}
+
+/*
+** This function is called to handle the SQLITE_FCNTL_SIZE_HINT
+** file-control operation.  Enlarge the database to nBytes in size
+** (rounded up to the next chunk-size).  If the database is already
+** nBytes or larger, this routine is a no-op.
+*/
+static int fcntlSizeHint(rttFile *pFile, i64 nByte){
+  if( pFile->szChunk>0 ){
+    i64 nSize;                    /* Required file size */
+    struct stat buf;              /* Used to hold return values of fstat() */
+
+    if( osFstat(pFile->h, &buf) ) return SQLITE_IOERR_FSTAT;
+
+    nSize = ((nByte+pFile->szChunk-1) / pFile->szChunk) * pFile->szChunk;
+    if( nSize>(i64)buf.st_size ){
+      /* If the OS does not have posix_fallocate(), fake it. First use
+      ** ftruncate() to set the file size, then write a single byte to
+      ** the last byte in each block within the extended region. This
+      ** is the same technique used by glibc to implement posix_fallocate()
+      ** on systems that do not have a real fallocate() system call.
+      */
+      int nBlk = buf.st_blksize;  /* File-system block size */
+      i64 iWrite;                 /* Next offset to write to */
+
+      if( robust_ftruncate(pFile->h, nSize) ){
+        pFile->lastErrno = errno;
+        return rttLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath);
+      }
+      iWrite = ((buf.st_size + 2*nBlk - 1)/nBlk)*nBlk-1;
+      while( iWrite<nSize ){
+        int nWrite = seekAndWrite(pFile, iWrite, "", 1);
+        if( nWrite!=1 ) return SQLITE_IOERR_WRITE;
+        iWrite += nBlk;
+      }
+    }
+  }
+
+  return SQLITE_OK;
+}
+
+/*
+** If *pArg is inititially negative then this is a query.  Set *pArg to
+** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set.
+**
+** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags.
+*/
+static void rttModeBit(rttFile *pFile, unsigned char mask, int *pArg){
+  if( *pArg<0 ){
+    *pArg = (pFile->ctrlFlags & mask)!=0;
+  }else if( (*pArg)==0 ){
+    pFile->ctrlFlags &= ~mask;
+  }else{
+    pFile->ctrlFlags |= mask;
+  }
+}
+
+/* Forward declaration */
+static int rttGetTempname(int nBuf, char *zBuf);
+
+/*
+** Information and control of an open file handle.
+*/
+static int rttFileControl(sqlite3_file *id, int op, void *pArg){
+  rttFile *pFile = (rttFile*)id;
+  switch( op ){
+    case SQLITE_FCNTL_LOCKSTATE: {
+      *(int*)pArg = pFile->eFileLock;
+      return SQLITE_OK;
+    }
+    case SQLITE_LAST_ERRNO: {
+      *(int*)pArg = pFile->lastErrno;
+      return SQLITE_OK;
+    }
+    case SQLITE_FCNTL_CHUNK_SIZE: {
+      pFile->szChunk = *(int *)pArg;
+      return SQLITE_OK;
+    }
+    case SQLITE_FCNTL_SIZE_HINT: {
+      int rc;
+      SimulateIOErrorBenign(1);
+      rc = fcntlSizeHint(pFile, *(i64 *)pArg);
+      SimulateIOErrorBenign(0);
+      return rc;
+    }
+    case SQLITE_FCNTL_PERSIST_WAL: {
+      rttModeBit(pFile, UNIXFILE_PERSIST_WAL, (int*)pArg);
+      return SQLITE_OK;
+    }
+    case SQLITE_FCNTL_POWERSAFE_OVERWRITE: {
+      rttModeBit(pFile, UNIXFILE_PSOW, (int*)pArg);
+      return SQLITE_OK;
+    }
+    case SQLITE_FCNTL_VFSNAME: {
+      *(char**)pArg = sqlite3_mprintf("%s", pFile->pVfs->zName);
+      return SQLITE_OK;
+    }
+    case SQLITE_FCNTL_TEMPFILENAME: {
+      char *zTFile = sqlite3_malloc( pFile->pVfs->mxPathname );
+      if( zTFile ){
+        rttGetTempname(pFile->pVfs->mxPathname, zTFile);
+        *(char**)pArg = zTFile;
+      }
+      return SQLITE_OK;
+    }
+#ifdef SQLITE_DEBUG
+    /* The pager calls this method to signal that it has done
+    ** a rollback and that the database is therefore unchanged and
+    ** it hence it is OK for the transaction change counter to be
+    ** unchanged.
+    */
+    case SQLITE_FCNTL_DB_UNCHANGED: {
+      ((rttFile*)id)->dbUpdate = 0;
+      return SQLITE_OK;
+    }
+#endif
+  }
+  return SQLITE_NOTFOUND;
+}
+
+/*
+** Return the sector size in bytes of the underlying block device for
+** the specified file. This is almost always 512 bytes, but may be
+** larger for some devices.
+**
+** SQLite code assumes this function cannot fail. It also assumes that
+** if two files are created in the same file-system directory (i.e.
+** a database and its journal file) that the sector size will be the
+** same for both.
+*/
+static int rttSectorSize(sqlite3_file *NotUsed){
+  UNUSED_PARAMETER(NotUsed);
+  return SQLITE_DEFAULT_SECTOR_SIZE;
+}
+
+
+/*
+** Return the device characteristics for the file.
+**
+** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default.
+** However, that choice is contraversial since technically the underlying
+** file system does not always provide powersafe overwrites.  (In other
+** words, after a power-loss event, parts of the file that were never
+** written might end up being altered.)  However, non-PSOW behavior is very,
+** very rare.  And asserting PSOW makes a large reduction in the amount
+** of required I/O for journaling, since a lot of padding is eliminated.
+**  Hence, while POWERSAFE_OVERWRITE is on by default, there is a file-control
+** available to turn it off and URI query parameter available to turn it off.
+*/
+static int rttDeviceCharacteristics(sqlite3_file *id){
+  rttFile *p = (rttFile*)id;
+  int rc = 0;
+
+  if( p->ctrlFlags & UNIXFILE_PSOW ){
+    rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
+  }
+  return rc;
+}
+
+#ifndef SQLITE_OMIT_WAL
+#  error "WAL mode requires not support from the rt-thread, compile\
+ with SQLITE_OMIT_WAL."
+#else
+# define rttShmMap     0
+# define rttShmLock    0
+# define rttShmBarrier 0
+# define rttShmUnmap   0
+#endif /* #ifndef SQLITE_OMIT_WAL */
+
+#if SQLITE_MAX_MMAP_SIZE>0
+#error "rtt not spportt mmap"
+#endif /* SQLITE_MAX_MMAP_SIZE>0 */
+
+/*
+** If possible, return a pointer to a mapping of file fd starting at offset
+** iOff. The mapping must be valid for at least nAmt bytes.
+**
+** If such a pointer can be obtained, store it in *pp and return SQLITE_OK.
+** Or, if one cannot but no error occurs, set *pp to 0 and return SQLITE_OK.
+** Finally, if an error does occur, return an SQLite error code. The final
+** value of *pp is undefined in this case.
+**
+** If this function does return a pointer, the caller must eventually
+** release the reference by calling unixUnfetch().
+*/
+static int rttFetch(sqlite3_file *fd, i64 iOff, int nAmt, void **pp){
+
+  *pp = 0;
+
+  return SQLITE_OK;
+}
+
+/*
+** If the third argument is non-NULL, then this function releases a
+** reference obtained by an earlier call to unixFetch(). The second
+** argument passed to this function must be the same as the corresponding
+** argument that was passed to the unixFetch() invocation.
+**
+** Or, if the third argument is NULL, then this function is being called
+** to inform the VFS layer that, according to POSIX, any existing mapping
+** may now be invalid and should be unmapped.
+*/
+static int rttUnfetch(sqlite3_file *fd, i64 iOff, void *p){
+  rttFile *pFd = (rttFile *)fd;   /* The underlying database file */
+  UNUSED_PARAMETER(iOff);
+
+  return SQLITE_OK;
+}
+
+/*
+** Here ends the implementation of all sqlite3_file methods.
+**
+********************** End sqlite3_file Methods *******************************
+******************************************************************************/
+
+/*
+** This division contains definitions of sqlite3_io_methods objects that
+** implement various file locking strategies.  It also contains definitions
+** of "finder" functions.  A finder-function is used to locate the appropriate
+** sqlite3_io_methods object for a particular database file.  The pAppData
+** field of the sqlite3_vfs VFS objects are initialized to be pointers to
+** the correct finder-function for that VFS.
+**
+** Most finder functions return a pointer to a fixed sqlite3_io_methods
+** object.  The only interesting finder-function is autolockIoFinder, which
+** looks at the filesystem type and tries to guess the best locking
+** strategy from that.
+**
+** For finder-funtion F, two objects are created:
+**
+**    (1) The real finder-function named "FImpt()".
+**
+**    (2) A constant pointer to this function named just "F".
+**
+**
+** A pointer to the F pointer is used as the pAppData value for VFS
+** objects.  We have to do this instead of letting pAppData point
+** directly at the finder-function since C90 rules prevent a void*
+** from be cast into a function pointer.
+**
+**
+** Each instance of this macro generates two objects:
+**
+**   *  A constant sqlite3_io_methods object call METHOD that has locking
+**      methods CLOSE, LOCK, UNLOCK, CKRESLOCK.
+**
+**   *  An I/O method finder function called FINDER that returns a pointer
+**      to the METHOD object in the previous bullet.
+*/
+#define IOMETHODS(FINDER, METHOD, VERSION, CLOSE, LOCK, UNLOCK, CKLOCK)      \
+static const sqlite3_io_methods METHOD = {                                   \
+   VERSION,                    /* iVersion */                                \
+   CLOSE,                      /* xClose */                                  \
+   rttRead,                   /* xRead */                                   \
+   rttWrite,                  /* xWrite */                                  \
+   rttTruncate,               /* xTruncate */                               \
+   rttSync,                   /* xSync */                                   \
+   rttFileSize,               /* xFileSize */                               \
+   LOCK,                       /* xLock */                                   \
+   UNLOCK,                     /* xUnlock */                                 \
+   CKLOCK,                     /* xCheckReservedLock */                      \
+   rttFileControl,            /* xFileControl */                            \
+   rttSectorSize,             /* xSectorSize */                             \
+   rttDeviceCharacteristics,  /* xDeviceCapabilities */                     \
+   rttShmMap,                 /* xShmMap */                                 \
+   rttShmLock,                /* xShmLock */                                \
+   rttShmBarrier,             /* xShmBarrier */                             \
+   rttShmUnmap,               /* xShmUnmap */                               \
+   rttFetch,                  /* xFetch */                                  \
+   rttUnfetch,                /* xUnfetch */                                \
+};                                                                           \
+static const sqlite3_io_methods *FINDER##Impl(const char *z, rttFile *p){   \
+  UNUSED_PARAMETER(z); UNUSED_PARAMETER(p);                                  \
+  return &METHOD;                                                            \
+}                                                                            \
+static const sqlite3_io_methods *(*const FINDER)(const char*,rttFile *p)    \
+    = FINDER##Impl;
+
+/*
+** Here are all of the sqlite3_io_methods objects for each of the
+** locking strategies.  Functions that return pointers to these methods
+** are also created.
+*/
+IOMETHODS(
+  nolockIoFinder,           /* Finder function name */
+  nolockIoMethods,          /* sqlite3_io_methods object name */
+  1,                        /* shared memory is disabled */
+  nolockClose,              /* xClose method */
+  nolockLock,               /* xLock method */
+  nolockUnlock,             /* xUnlock method */
+  nolockCheckReservedLock   /* xCheckReservedLock method */
+)
+IOMETHODS(
+  dotlockIoFinder,          /* Finder function name */
+  dotlockIoMethods,         /* sqlite3_io_methods object name */
+  1,                        /* shared memory is disabled */
+  dotlockClose,             /* xClose method */
+  dotlockLock,              /* xLock method */
+  dotlockUnlock,            /* xUnlock method */
+  dotlockCheckReservedLock  /* xCheckReservedLock method */
+)
+
+#if SQLITE_ENABLE_LOCKING_STYLE
+IOMETHODS(
+  flockIoFinder,            /* Finder function name */
+  flockIoMethods,           /* sqlite3_io_methods object name */
+  1,                        /* shared memory is disabled */
+  flockClose,               /* xClose method */
+  flockLock,                /* xLock method */
+  flockUnlock,              /* xUnlock method */
+  flockCheckReservedLock    /* xCheckReservedLock method */
+)
+#endif
+
+/*
+** An abstract type for a pointer to a IO method finder function:
+*/
+typedef const sqlite3_io_methods *(*finder_type)(const char*,rttFile*);
+
+
+/****************************************************************************
+**************************** sqlite3_vfs methods ****************************
+**
+** This division contains the implementation of methods on the
+** sqlite3_vfs object.
+*/
+
+/*
+** Initialize the contents of the rttFile structure pointed to by pId.
+*/
+static int fillInRttFile(
+  sqlite3_vfs *pVfs,      /* Pointer to vfs object */
+  int h,                  /* Open file descriptor of file being opened */
+  sqlite3_file *pId,      /* Write to the rttFile structure here */
+  const char *zFilename,  /* Name of the file being opened */
+  int ctrlFlags           /* Zero or more UNIXFILE_* values */
+){
+  const sqlite3_io_methods *pLockingStyle;
+  rttFile *pNew = (rttFile *)pId;
+  int rc = SQLITE_OK;
+
+  assert( pNew->pInode==NULL );
+
+  /* Usually the path zFilename should not be a relative pathname. The
+  ** exception is when opening the proxy "conch" file in builds that
+  ** include the special Apple locking styles.
+  */
+  assert( zFilename==0 || zFilename[0]=='/' );
+
+  /* No locking occurs in temporary files */
+  assert( zFilename!=0 || (ctrlFlags & UNIXFILE_NOLOCK)!=0 );
+
+  OSTRACE(("OPEN    %-3d %s\n", h, zFilename));
+  pNew->h = h;
+  pNew->pVfs = pVfs;
+  pNew->zPath = zFilename;
+  pNew->ctrlFlags = (u8)ctrlFlags;
+  if( sqlite3_uri_boolean(((ctrlFlags & UNIXFILE_URI) ? zFilename : 0),
+                           "psow", SQLITE_POWERSAFE_OVERWRITE) ){
+    pNew->ctrlFlags |= UNIXFILE_PSOW;
+  }
+  if( strcmp(pVfs->zName,"unix-excl")==0 ){
+    pNew->ctrlFlags |= UNIXFILE_EXCL;
+  }
+
+  if( ctrlFlags & UNIXFILE_NOLOCK ){
+    pLockingStyle = &nolockIoMethods;
+  }else{
+    pLockingStyle = (**(finder_type*)pVfs->pAppData)(zFilename, pNew);
+#if SQLITE_ENABLE_LOCKING_STYLE
+    /* Cache zFilename in the locking context (AFP and dotlock override) for
+    ** proxyLock activation is possible (remote proxy is based on db name)
+    ** zFilename remains valid until file is closed, to support */
+    pNew->lockingContext = (void*)zFilename;
+#endif
+  }
+
+  if( pLockingStyle == &dotlockIoMethods ){
+    /* Dotfile locking uses the file path so it needs to be included in
+    ** the dotlockLockingContext
+    */
+    char *zLockFile;
+    int nFilename;
+    assert( zFilename!=0 );
+    nFilename = (int)strlen(zFilename) + 6;
+    zLockFile = (char *)sqlite3_malloc(nFilename);
+    if( zLockFile==0 ){
+      rc = SQLITE_NOMEM;
+    }else{
+      sqlite3_snprintf(nFilename, zLockFile, "%s" DOTLOCK_SUFFIX, zFilename);
+    }
+    pNew->lockingContext = zLockFile;
+  }
+
+  pNew->lastErrno = 0;
+  if( rc!=SQLITE_OK ){
+    if( h>=0 ) robust_close(pNew, h, __LINE__);
+  }else{
+    pNew->pMethod = pLockingStyle;
+    OpenCounter(+1);
+    verifyDbFile(pNew);
+  }
+  return rc;
+}
+
+/*
+** Return the name of a directory in which to put temporary files.
+** If no suitable temporary file directory can be found, return NULL.
+*/
+static const char *rttTempFileDir(void){
+  static const char *azDirs[] = {
+     0,
+     "/sql",
+     "/sql/tmp"
+     "/tmp",
+     0        /* List terminator */
+  };
+  unsigned int i;
+  struct stat buf;
+  const char *zDir = 0;
+
+  azDirs[0] = sqlite3_temp_directory;
+
+  for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); zDir=azDirs[i++]){
+    if( zDir==0 ) continue;
+    if( osStat(zDir, &buf) ) continue;
+    if( !S_ISDIR(buf.st_mode) ) continue;
+    break;
+  }
+  return zDir;
+}
+
+/*
+** Create a temporary file name in zBuf.  zBuf must be allocated
+** by the calling process and must be big enough to hold at least
+** pVfs->mxPathname bytes.
+*/
+static int rttGetTempname(int nBuf, char *zBuf){
+  static const unsigned char zChars[] =
+    "abcdefghijklmnopqrstuvwxyz"
+    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+    "0123456789";
+  unsigned int i, j;
+  const char *zDir;
+
+  /* It's odd to simulate an io-error here, but really this is just
+  ** using the io-error infrastructure to test that SQLite handles this
+  ** function failing.
+  */
+  SimulateIOError( return SQLITE_IOERR );
+
+  zDir = rttTempFileDir();
+  if( zDir==0 ) zDir = ".";
+
+  /* Check that the output buffer is large enough for the temporary file
+  ** name. If it is not, return SQLITE_ERROR.
+  */
+  if( (strlen(zDir) + strlen(SQLITE_TEMP_FILE_PREFIX) + 18) >= (size_t)nBuf ){
+    return SQLITE_ERROR;
+  }
+
+  do{
+    sqlite3_snprintf(nBuf-18, zBuf, "%s/"SQLITE_TEMP_FILE_PREFIX, zDir);
+    j = (int)strlen(zBuf);
+    sqlite3_randomness(15, &zBuf[j]);
+    for(i=0; i<15; i++, j++){
+      zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
+    }
+    zBuf[j] = 0;
+    zBuf[j+1] = 0;
+  }while( osAccess(zBuf,0)==0 );
+  return SQLITE_OK;
+}
+
+/*
+** Open the file zPath.
+**
+** Previously, the SQLite OS layer used three functions in place of this
+** one:
+**
+**     sqlite3OsOpenReadWrite();
+**     sqlite3OsOpenReadOnly();
+**     sqlite3OsOpenExclusive();
+**
+** These calls correspond to the following combinations of flags:
+**
+**     ReadWrite() ->     (READWRITE | CREATE)
+**     ReadOnly()  ->     (READONLY)
+**     OpenExclusive() -> (READWRITE | CREATE | EXCLUSIVE)
+**
+** The old OpenExclusive() accepted a boolean argument - "delFlag". If
+** true, the file was configured to be automatically deleted when the
+** file handle closed. To achieve the same effect using this new
+** interface, add the DELETEONCLOSE flag to those specified above for
+** OpenExclusive().
+*/
+static int rttOpen(
+  sqlite3_vfs *pVfs,           /* The VFS for which this is the xOpen method */
+  const char *zPath,           /* Pathname of file to be opened */
+  sqlite3_file *pFile,         /* The file descriptor to be filled in */
+  int flags,                   /* Input flags to control the opening */
+  int *pOutFlags               /* Output flags returned to SQLite core */
+){
+  rttFile *p = (rttFile *)pFile;
+  int fd = -1;                   /* File descriptor returned by open() */
+  int openFlags = 0;             /* Flags to pass to open() */
+  int eType = flags&0xFFFFFF00;  /* Type of file to open */
+  int noLock;                    /* True to omit locking primitives */
+  int rc = SQLITE_OK;            /* Function Return Code */
+  int ctrlFlags = 0;             /* UNIXFILE_* flags */
+
+  int isExclusive  = (flags & SQLITE_OPEN_EXCLUSIVE);
+  int isDelete     = (flags & SQLITE_OPEN_DELETEONCLOSE);
+  int isCreate     = (flags & SQLITE_OPEN_CREATE);
+  int isReadonly   = (flags & SQLITE_OPEN_READONLY);
+  int isReadWrite  = (flags & SQLITE_OPEN_READWRITE);
+#if SQLITE_ENABLE_LOCKING_STYLE
+  int isAutoProxy  = (flags & SQLITE_OPEN_AUTOPROXY);
+#endif
+
+  /* If creating a master or main-file journal, this function will open
+  ** a file-descriptor on the directory too. The first time unixSync()
+  ** is called the directory file descriptor will be fsync()ed and close()d.
+  */
+  int syncDir = (isCreate && (
+        eType==SQLITE_OPEN_MASTER_JOURNAL
+     || eType==SQLITE_OPEN_MAIN_JOURNAL
+     || eType==SQLITE_OPEN_WAL
+  ));
+
+  /* If argument zPath is a NULL pointer, this function is required to open
+  ** a temporary file. Use this buffer to store the file name in.
+  */
+  char zTmpname[MAX_PATHNAME+2];
+  const char *zName = zPath;
+
+  /* Check the following statements are true:
+  **
+  **   (a) Exactly one of the READWRITE and READONLY flags must be set, and
+  **   (b) if CREATE is set, then READWRITE must also be set, and
+  **   (c) if EXCLUSIVE is set, then CREATE must also be set.
+  **   (d) if DELETEONCLOSE is set, then CREATE must also be set.
+  */
+  assert((isReadonly==0 || isReadWrite==0) && (isReadWrite || isReadonly));
+  assert(isCreate==0 || isReadWrite);
+  assert(isExclusive==0 || isCreate);
+  assert(isDelete==0 || isCreate);
+
+  /* The main DB, main journal, WAL file and master journal are never
+  ** automatically deleted. Nor are they ever temporary files.  */
+  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_DB );
+  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MAIN_JOURNAL );
+  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_MASTER_JOURNAL );
+  assert( (!isDelete && zName) || eType!=SQLITE_OPEN_WAL );
+
+  /* Assert that the upper layer has set one of the "file-type" flags. */
+  assert( eType==SQLITE_OPEN_MAIN_DB      || eType==SQLITE_OPEN_TEMP_DB
+       || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_TEMP_JOURNAL
+       || eType==SQLITE_OPEN_SUBJOURNAL   || eType==SQLITE_OPEN_MASTER_JOURNAL
+       || eType==SQLITE_OPEN_TRANSIENT_DB || eType==SQLITE_OPEN_WAL
+  );
+
+  memset(p, 0, sizeof(rttFile));
+  if( !zName ){
+    /* If zName is NULL, the upper layer is requesting a temp file. */
+    assert(isDelete && !syncDir);
+    rc = rttGetTempname(MAX_PATHNAME+2, zTmpname);
+    if( rc!=SQLITE_OK ){
+      return rc;
+    }
+    zName = zTmpname;
+
+    /* Generated temporary filenames are always double-zero terminated
+    ** for use by sqlite3_uri_parameter(). */
+    assert( zName[strlen(zName)+1]==0 );
+  }
+
+  /* Determine the value of the flags parameter passed to POSIX function
+  ** open(). These must be calculated even if open() is not called, as
+  ** they may be stored as part of the file handle and used by the
+  ** 'conch file' locking functions later on.  */
+  if( isReadonly )  openFlags |= O_RDONLY;
+  if( isReadWrite ) openFlags |= O_RDWR;
+  if( isCreate )    openFlags |= O_CREAT;
+  if( isExclusive ) openFlags |= (O_EXCL|0/*O_NOFOLLOW8*/);
+  openFlags |= (0/*O_LARGEFILE*/|O_BINARY);
+
+  if( fd<0 ){
+    mode_t openMode = 0;              /* Permissions to create file with */
+
+    fd = robust_open(zName, openFlags, openMode);
+    OSTRACE(("OPENX   %-3d %s 0%o\n", fd, zName, openFlags));
+    if( fd<0 && errno!=EISDIR && isReadWrite && !isExclusive ){
+      /* Failed to open the file for read/write access. Try read-only. */
+      flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
+      openFlags &= ~(O_RDWR|O_CREAT);
+      flags |= SQLITE_OPEN_READONLY;
+      openFlags |= O_RDONLY;
+      isReadonly = 1;
+      fd = robust_open(zName, openFlags, openMode);
+    }
+    if( fd<0 ){
+      rc = rttLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
+      goto open_finished;
+    }
+  }
+  assert( fd>=0 );
+  if( pOutFlags ){
+    *pOutFlags = flags;
+  }
+
+  if( isDelete ){
+    osUnlink(zName);
+  }
+#if SQLITE_ENABLE_LOCKING_STYLE
+  else{
+    p->openFlags = openFlags;
+  }
+#endif
+
+  noLock = eType!=SQLITE_OPEN_MAIN_DB;
+
+  /* Set up appropriate ctrlFlags */
+  if( isDelete )                ctrlFlags |= UNIXFILE_DELETE;
+  if( isReadonly )              ctrlFlags |= UNIXFILE_RDONLY;
+  if( noLock )                  ctrlFlags |= UNIXFILE_NOLOCK;
+  if( syncDir )                 ctrlFlags |= UNIXFILE_DIRSYNC;
+  if( flags & SQLITE_OPEN_URI ) ctrlFlags |= UNIXFILE_URI;
+
+  rc = fillInRttFile(pVfs, fd, pFile, zPath, ctrlFlags);
+
+open_finished:
+
+  return rc;
+}
+
+
+/*
+** Delete the file at zPath. If the dirSync argument is true, fsync()
+** the directory after deleting the file.
+*/
+static int rttDelete(
+  sqlite3_vfs *NotUsed,     /* VFS containing this as the xDelete method */
+  const char *zPath,        /* Name of file to be deleted */
+  int dirSync               /* If true, fsync() directory after deleting file */
+){
+  int rc = SQLITE_OK;
+  UNUSED_PARAMETER(NotUsed);
+  SimulateIOError(return SQLITE_IOERR_DELETE);
+  if( osUnlink(zPath)==(-1) ){
+    if( errno==ENOENT ){
+      rc = SQLITE_IOERR_DELETE_NOENT;
+    }else{
+      rc = rttLogError(SQLITE_IOERR_DELETE, "unlink", zPath);
+    }
+    return rc;
+  }
+#ifndef SQLITE_DISABLE_DIRSYNC
+  if( (dirSync & 1)!=0 ){
+    int fd;
+    rc = osOpenDirectory(zPath, &fd);
+    if( rc==SQLITE_OK ){
+      robust_close(0, fd, __LINE__);
+    }else if( rc==SQLITE_CANTOPEN ){
+      rc = SQLITE_OK;
+    }
+  }
+#endif
+  return rc;
+}
+
+/*
+** Test the existence of or access permissions of file zPath. The
+** test performed depends on the value of flags:
+**
+**     SQLITE_ACCESS_EXISTS: Return 1 if the file exists
+**     SQLITE_ACCESS_READWRITE: Return 1 if the file is read and writable.
+**     SQLITE_ACCESS_READONLY: Return 1 if the file is readable.
+**
+** Otherwise return 0.
+*/
+static int rttAccess(
+  sqlite3_vfs *NotUsed,   /* The VFS containing this xAccess method */
+  const char *zPath,      /* Path of the file to examine */
+  int flags,              /* What do we want to learn about the zPath file? */
+  int *pResOut            /* Write result boolean here */
+){
+  int amode = 0;
+  UNUSED_PARAMETER(NotUsed);
+  SimulateIOError( return SQLITE_IOERR_ACCESS; );
+  switch( flags ){
+    case SQLITE_ACCESS_EXISTS:
+      amode = F_OK;
+      break;
+    case SQLITE_ACCESS_READWRITE:
+      amode = W_OK|R_OK;
+      break;
+    case SQLITE_ACCESS_READ:
+      amode = R_OK;
+      break;
+
+    default:
+      assert(!"Invalid flags argument");
+  }
+  *pResOut = (osAccess(zPath, amode)==0);
+  if( flags==SQLITE_ACCESS_EXISTS && *pResOut ){
+    struct stat buf;
+    if( 0==osStat(zPath, &buf) && buf.st_size==0 ){
+      *pResOut = 0;
+    }
+  }
+  return SQLITE_OK;
+}
+
+
+/*
+** Turn a relative pathname into a full pathname. The relative path
+** is stored as a nul-terminated string in the buffer pointed to by
+** zPath.
+**
+** zOut points to a buffer of at least sqlite3_vfs.mxPathname bytes
+** (in this case, MAX_PATHNAME bytes). The full-path is written to
+** this buffer before returning.
+*/
+static int rttFullPathname(
+  sqlite3_vfs *pVfs,            /* Pointer to vfs object */
+  const char *zPath,            /* Possibly relative input path */
+  int nOut,                     /* Size of output buffer in bytes */
+  char *zOut                    /* Output buffer */
+){
+
+  /* It's odd to simulate an io-error here, but really this is just
+  ** using the io-error infrastructure to test that SQLite handles this
+  ** function failing. This function could fail if, for example, the
+  ** current working directory has been unlinked.
+  */
+  SimulateIOError( return SQLITE_ERROR );
+
+  assert( pVfs->mxPathname==MAX_PATHNAME );
+  UNUSED_PARAMETER(pVfs);
+
+  zOut[nOut-1] = '\0';
+  if( zPath[0]=='/' ){
+    sqlite3_snprintf(nOut, zOut, "%s", zPath);
+  }else{
+    int nCwd;
+    if( osGetcwd(zOut, nOut-1)==0 ){
+      return rttLogError(SQLITE_CANTOPEN_BKPT, "getcwd", zPath);
+    }
+    nCwd = (int)strlen(zOut);
+    sqlite3_snprintf(nOut-nCwd, &zOut[nCwd], "/%s", zPath);
+  }
+  return SQLITE_OK;
+}
+
+
+#ifndef SQLITE_OMIT_LOAD_EXTENSION
+# error "rtt not support load extension, compile with SQLITE_OMIT_WAL."
+#else /* if SQLITE_OMIT_LOAD_EXTENSION is defined: */
+  #define rttDlOpen  0
+  #define rttDlError 0
+  #define rttDlSym   0
+  #define rttDlClose 0
+#endif
+
+/*
+** Write nBuf bytes of random data to the supplied buffer zBuf.
+*/
+static int rttRandomness(sqlite3_vfs *NotUsed, int nBuf, char *zBuf){
+  UNUSED_PARAMETER(NotUsed);
+  assert((size_t)nBuf>=(sizeof(time_t)+sizeof(int)));
+
+  /* We have to initialize zBuf to prevent valgrind from reporting
+  ** errors.  The reports issued by valgrind are incorrect - we would
+  ** prefer that the randomness be increased by making use of the
+  ** uninitialized space in zBuf - but valgrind errors tend to worry
+  ** some users.  Rather than argue, it seems easier just to initialize
+  ** the whole array and silence valgrind, even if that means less randomness
+  ** in the random seed.
+  **
+  ** When testing, initializing zBuf[] to zero is all we do.  That means
+  ** that we always use the same random number sequence.  This makes the
+  ** tests repeatable.
+  */
+  memset(zBuf, 0, nBuf);
+  {
+    int i;
+    char tick8, tick16;
+    tick8 = (char)rt_tick_get();
+    tick16 = (char)(rt_tick_get() >> 8);
+
+    for (i=0; i<nBuf; i++)
+    {
+        zBuf[i] = (char)(i ^ tick8 ^ tick16);
+        tick8 = zBuf[i];
+        tick16 = ~(tick8 ^ tick16);
+    }
+  }
+  return nBuf;
+}
+
+
+/*
+** Sleep for a little while.  Return the amount of time slept.
+** The argument is the number of microseconds we want to sleep.
+** The return value is the number of microseconds of sleep actually
+** requested from the underlying operating system, a number which
+** might be greater than or equal to the argument, but not less
+** than the argument.
+*/
+static int rttSleep(sqlite3_vfs *NotUsed, int microseconds){
+
+  int seconds = (microseconds+999999)/1000000;
+  osSleep(seconds * 1000);
+  UNUSED_PARAMETER(NotUsed);
+  return seconds*1000000;
+}
+
+/*
+** The following variable, if set to a non-zero value, is interpreted as
+** the number of seconds since 1970 and is used to set the result of
+** sqlite3OsCurrentTime() during testing.
+*/
+#ifdef SQLITE_TEST
+int sqlite3_current_time = 0;  /* Fake system time in seconds since 1970. */
+#endif
+
+#ifndef NO_GETTOD
+#define NO_GETTOD 1
+#endif
+
+/*
+** Find the current time (in Universal Coordinated Time).  Write into *piNow
+** the current time and date as a Julian Day number times 86_400_000.  In
+** other words, write into *piNow the number of milliseconds since the Julian
+** epoch of noon in Greenwich on November 24, 4714 B.C according to the
+** proleptic Gregorian calendar.
+**
+** On success, return SQLITE_OK.  Return SQLITE_ERROR if the time and date
+** cannot be found.
+*/
+static int rttCurrentTimeInt64(sqlite3_vfs *NotUsed, sqlite3_int64 *piNow){
+  static const sqlite3_int64 rttEpoch = 24405875*(sqlite3_int64)8640000;
+  int rc = SQLITE_OK;
+#if defined(NO_GETTOD)
+  time_t t;
+  time(&t);
+  *piNow = ((sqlite3_int64)t)*1000 + rttEpoch;
+#else
+  struct timeval sNow;
+  if( gettimeofday(&sNow, 0)==0 ){
+    *piNow = rttEpoch + 1000*(sqlite3_int64)sNow.tv_sec + sNow.tv_usec/1000;
+  }else{
+    rc = SQLITE_ERROR;
+  }
+#endif
+
+#ifdef SQLITE_TEST
+  if( sqlite3_current_time ){
+    *piNow = 1000*(sqlite3_int64)sqlite3_current_time + rttEpoch;
+  }
+#endif
+  UNUSED_PARAMETER(NotUsed);
+  return rc;
+}
+
+/*
+** Find the current time (in Universal Coordinated Time).  Write the
+** current time and date as a Julian Day number into *prNow and
+** return 0.  Return 1 if the time and date cannot be found.
+*/
+static int rttCurrentTime(sqlite3_vfs *NotUsed, double *prNow){
+  sqlite3_int64 i = 0;
+  int rc;
+  UNUSED_PARAMETER(NotUsed);
+  rc = rttCurrentTimeInt64(0, &i);
+  *prNow = i/86400000.0;
+  return rc;
+}
+
+/*
+** We added the xGetLastError() method with the intention of providing
+** better low-level error messages when operating-system problems come up
+** during SQLite operation.  But so far, none of that has been implemented
+** in the core.  So this routine is never called.  For now, it is merely
+** a place-holder.
+*/
+static int rttGetLastError(sqlite3_vfs *NotUsed, int NotUsed2, char *NotUsed3){
+  UNUSED_PARAMETER(NotUsed);
+  UNUSED_PARAMETER(NotUsed2);
+  UNUSED_PARAMETER(NotUsed3);
+  return 0;
+}
+
+
+/*
+************************ End of sqlite3_vfs methods ***************************
+******************************************************************************/
+
+/*
+** Initialize the operating system interface.
+**
+** This routine registers all VFS implementations for unix-like operating
+** systems.  This routine, and the sqlite3_os_end() routine that follows,
+** should be the only routines in this file that are visible from other
+** files.
+**
+** This routine is called once during SQLite initialization and by a
+** single thread.  The memory allocation and mutex subsystems have not
+** necessarily been initialized when this routine is called, and so they
+** should not be used.
+*/
+/*
+  ** The following macro defines an initializer for an sqlite3_vfs object.
+  ** The name of the VFS is NAME.  The pAppData is a pointer to a pointer
+  ** to the "finder" function.  (pAppData is a pointer to a pointer because
+  ** silly C90 rules prohibit a void* from being cast to a function pointer
+  ** and so we have to go through the intermediate pointer to avoid problems
+  ** when compiling with -pedantic-errors on GCC.)
+  **
+  ** The FINDER parameter to this macro is the name of the pointer to the
+  ** finder-function.  The finder-function returns a pointer to the
+  ** sqlite_io_methods object that implements the desired locking
+  ** behaviors.  See the division above that contains the IOMETHODS
+  ** macro for addition information on finder-functions.
+  **
+  ** Most finders simply return a pointer to a fixed sqlite3_io_methods
+  ** object.  But the "autolockIoFinder" available on MacOSX does a little
+  ** more than that; it looks at the filesystem type that hosts the
+  ** database file and tries to choose an locking method appropriate for
+  ** that filesystem time.
+  */
+#define UNIXVFS(VFSNAME, FINDER) {                        \
+    3,                    /* iVersion */                    \
+    sizeof(rttFile),     /* szOsFile */                    \
+    MAX_PATHNAME,         /* mxPathname */                  \
+    0,                    /* pNext */                       \
+    VFSNAME,              /* zName */                       \
+    (void*)&FINDER,       /* pAppData */                    \
+    rttOpen,             /* xOpen */                       \
+    rttDelete,           /* xDelete */                     \
+    rttAccess,           /* xAccess */                     \
+    rttFullPathname,     /* xFullPathname */               \
+    rttDlOpen,           /* xDlOpen */                     \
+    rttDlError,          /* xDlError */                    \
+    rttDlSym,            /* xDlSym */                      \
+    rttDlClose,          /* xDlClose */                    \
+    rttRandomness,       /* xRandomness */                 \
+    rttSleep,            /* xSleep */                      \
+    rttCurrentTime,      /* xCurrentTime */                \
+    rttGetLastError,     /* xGetLastError */               \
+    rttCurrentTimeInt64, /* xCurrentTimeInt64 */           \
+    rttSetSystemCall,    /* xSetSystemCall */              \
+    rttGetSystemCall,    /* xGetSystemCall */              \
+    rttNextSystemCall,   /* xNextSystemCall */             \
+  }
+
+int sqlite3_os_init(void){
+  /*
+  ** All default VFSes for unix are contained in the following array.
+  **
+  ** Note that the sqlite3_vfs.pNext field of the VFS object is modified
+  ** by the SQLite core when the VFS is registered.  So the following
+  ** array cannot be const.
+  */
+  static sqlite3_vfs aVfs[] = {
+    UNIXVFS("unix-none",     nolockIoFinder ),
+    UNIXVFS("unix-dotfile",  dotlockIoFinder ),
+#if SQLITE_ENABLE_LOCKING_STYLE
+    UNIXVFS("unix-flock",    flockIoFinder ),
+#endif
+  };
+  unsigned int i;          /* Loop counter */
+
+  /* Double-check that the aSyscall[] array has been constructed
+  ** correctly.  See ticket [bb3a86e890c8e96ab] */
+  assert( ArraySize(aSyscall)==24 );
+
+  /* Register all VFSes defined in the aVfs[] array */
+  for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
+    sqlite3_vfs_register(&aVfs[i], i==0);
+  }
+  return SQLITE_OK;
+}
+
+/*
+** Shutdown the operating system interface.
+**
+** Some operating systems might need to do some cleanup in this routine,
+** to release dynamically allocated objects.  But not on unix.
+** This routine is a no-op for unix.
+*/
+int sqlite3_os_end(void){
+  return SQLITE_OK;
+}
+
+
+#endif /* SQLITE_OS_RTT */
+