new file： ../../libcpu/risc-v/e310/trap.c

	add file that forget to submit before
	auto change timer mtimercmp register on the base of RT_TICK_PER_SECOND in rtconfig.h
	no flashing led
new file：   ../../src/idle.c
	recover old file

1 files changed, 55 insertions, 0 deletions

diff --git a/libcpu/risc-v/e310/trap.c b/libcpu/risc-v/e310/trap.c
new file mode 100644
index 0000000000..7429e1a5f3
--- /dev/null
+++ b/libcpu/risc-v/e310/trap.c
@@ -0,0 +1,55 @@
+#include <rtthread.h>
+#include <rthw.h>
+#include <platform.h>
+#include <encoding.h>
+#include "interrupt.h"
+extern struct rt_irq_desc irq_desc[];
+extern rt_uint32_t rt_hw_interrupt_get_active(rt_uint32_t fiq_irq);
+void rt_hw_trap_irq()
+{
+    rt_isr_handler_t isr_func;
+    rt_uint32_t irq;
+    void *param;
+
+    /* get irq number */
+    irq = rt_hw_interrupt_get_active(0);
+
+    /* get interrupt service routine */
+    isr_func = irq_desc[irq].handler;
+    param = irq_desc[irq].param;
+
+    /* turn to interrupt service routine */
+    isr_func(irq, param);
+    rt_hw_interrupt_ack(0, irq);
+
+#ifdef RT_USING_INTERRUPT_INFO
+    irq_desc[irq].counter ++;
+#endif
+}
+void handle_m_ext_interrupt()
+{
+}
+void rt_systick_handler(void)
+{
+    clear_csr(mie, MIP_MTIP);
+
+    // Reset the timer for 3s in the future.
+    // This also clears the existing timer interrupt.
+
+    volatile uint64_t * mtime       = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
+    volatile uint64_t * mtimecmp    = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
+    uint64_t now = *mtime;
+    uint64_t then = now + 2 * RTC_FREQ/RT_TICK_PER_SECOND;
+    *mtimecmp = then;
+    rt_tick_increase();
+
+    // read the current value of the LEDS and invert them.
+/*
+    GPIO_REG(GPIO_OUTPUT_VAL) ^= ((0x1 << RED_LED_OFFSET)   |
+		    (0x1 << GREEN_LED_OFFSET) |
+		    (0x1 << BLUE_LED_OFFSET));
+		    */
+
+    // Re-enable the timer interrupt.
+    set_csr(mie, MIP_MTIP);
+}