diff options
| -rw-r--r-- | bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart.c | 6 | ||||
| -rw-r--r-- | bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart_v2.c | 11 |
2 files changed, 11 insertions, 6 deletions
diff --git a/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart.c b/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart.c index a5665ac830..4c85e2afb2 100644 --- a/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart.c +++ b/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart.c @@ -973,7 +973,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag) /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ SET_BIT(RCC->AHBENR, dma_config->dma_rcc); tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc); -#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \ +#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \ || defined(SOC_SERIES_STM32G4)|| defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32WB) /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ SET_BIT(RCC->AHB1ENR, dma_config->dma_rcc); @@ -1005,7 +1005,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag) #if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3) || defined(SOC_SERIES_STM32L1) || defined(SOC_SERIES_STM32U5) || defined(SOC_SERIES_STM32H5) DMA_Handle->Instance = dma_config->Instance; -#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) +#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) DMA_Handle->Instance = dma_config->Instance; DMA_Handle->Init.Channel = dma_config->channel; #elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)\ @@ -1030,7 +1030,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag) } DMA_Handle->Init.Priority = DMA_PRIORITY_MEDIUM; -#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1) +#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1) DMA_Handle->Init.FIFOMode = DMA_FIFOMODE_DISABLE; #endif if (HAL_DMA_DeInit(DMA_Handle) != HAL_OK) diff --git a/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart_v2.c b/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart_v2.c index 9da522cb3f..85a42a29f0 100644 --- a/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart_v2.c +++ b/bsp/stm32/libraries/HAL_Drivers/drivers/drv_usart_v2.c @@ -89,18 +89,23 @@ static struct stm32_uart_config uart_config[] = #ifdef BSP_USING_UART4 UART4_CONFIG, #endif + #ifdef BSP_USING_UART5 UART5_CONFIG, #endif + #ifdef BSP_USING_UART6 UART6_CONFIG, #endif + #ifdef BSP_USING_UART7 UART7_CONFIG, #endif + #ifdef BSP_USING_UART8 UART8_CONFIG, #endif + #ifdef BSP_USING_LPUART1 LPUART1_CONFIG, #endif @@ -1052,7 +1057,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag) /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ SET_BIT(RCC->AHBENR, dma_config->dma_rcc); tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc); -#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \ +#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \ || defined(SOC_SERIES_STM32G4)|| defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32WB) /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ SET_BIT(RCC->AHB1ENR, dma_config->dma_rcc); @@ -1084,7 +1089,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag) #if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0) DMA_Handle->Instance = dma_config->Instance; -#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) +#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) DMA_Handle->Instance = dma_config->Instance; DMA_Handle->Init.Channel = dma_config->channel; #elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)\ @@ -1109,7 +1114,7 @@ static void stm32_dma_config(struct rt_serial_device *serial, rt_ubase_t flag) } DMA_Handle->Init.Priority = DMA_PRIORITY_MEDIUM; -#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1) +#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1) DMA_Handle->Init.FIFOMode = DMA_FIFOMODE_DISABLE; #endif if (HAL_DMA_DeInit(DMA_Handle) != HAL_OK) |