diff options
28 files changed, 11002 insertions, 123 deletions
diff --git a/bsp/essemi/es32f369x/.config b/bsp/essemi/es32f369x/.config index 87c4c09d7c..1c88a0f6c4 100644 --- a/bsp/essemi/es32f369x/.config +++ b/bsp/essemi/es32f369x/.config @@ -64,7 +64,7 @@ CONFIG_RT_USING_DEVICE=y CONFIG_RT_USING_CONSOLE=y CONFIG_RT_CONSOLEBUF_SIZE=128 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0" -CONFIG_RT_VER_NUM=0x40002 +CONFIG_RT_VER_NUM=0x40003 # CONFIG_RT_USING_CPU_FFS is not set # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set @@ -114,12 +114,10 @@ CONFIG_RT_PIPE_BUFSZ=512 CONFIG_RT_USING_SERIAL=y # CONFIG_RT_SERIAL_USING_DMA is not set CONFIG_RT_SERIAL_RB_BUFSZ=64 -CONFIG_RT_USING_CAN=y -# CONFIG_RT_CAN_USING_HDR is not set +# CONFIG_RT_USING_CAN is not set # CONFIG_RT_USING_HWTIMER is not set # CONFIG_RT_USING_CPUTIME is not set -CONFIG_RT_USING_I2C=y -# CONFIG_RT_USING_I2C_BITOPS is not set +# CONFIG_RT_USING_I2C is not set CONFIG_RT_USING_PIN=y # CONFIG_RT_USING_ADC is not set # CONFIG_RT_USING_PWM is not set @@ -194,11 +192,15 @@ CONFIG_RT_USING_PIN=y # # IoT - internet of things # +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set # CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set # CONFIG_PKG_USING_WEBCLIENT is not set # CONFIG_PKG_USING_WEBNET is not set # CONFIG_PKG_USING_MONGOOSE is not set # CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set # CONFIG_PKG_USING_WEBTERMINAL is not set # CONFIG_PKG_USING_CJSON is not set # CONFIG_PKG_USING_JSMN is not set @@ -225,6 +227,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_COAP is not set # CONFIG_PKG_USING_NOPOLL is not set # CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set # CONFIG_PKG_USING_PPP_DEVICE is not set # CONFIG_PKG_USING_AT_DEVICE is not set # CONFIG_PKG_USING_ATSRV_SOCKET is not set @@ -237,9 +240,10 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_GAGENT_CLOUD is not set # CONFIG_PKG_USING_ALI_IOTKIT is not set # CONFIG_PKG_USING_AZURE is not set -# CONFIG_PKG_USING_TENCENT_IOTHUB is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set # CONFIG_PKG_USING_JIOT-C-SDK is not set # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set # CONFIG_PKG_USING_NIMBLE is not set # CONFIG_PKG_USING_OTA_DOWNLOADER is not set # CONFIG_PKG_USING_IPMSG is not set @@ -256,6 +260,11 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ABUP_FOTA is not set # CONFIG_PKG_USING_LIBCURL2RTT is not set # CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PDULIB is not set # # security packages @@ -263,6 +272,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_MBEDTLS is not set # CONFIG_PKG_USING_libsodium is not set # CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set # # language packages @@ -297,6 +308,9 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set # CONFIG_PKG_USING_LUNAR_CALENDAR is not set # CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set # # system packages @@ -307,6 +321,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_LWEXT4 is not set # CONFIG_PKG_USING_PARTITION is not set # CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set # CONFIG_PKG_USING_SQLITE is not set # CONFIG_PKG_USING_RTI is not set # CONFIG_PKG_USING_LITTLEVGL2RTT is not set @@ -317,6 +332,12 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ROBOTS is not set # CONFIG_PKG_USING_EV is not set # CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set # # peripheral libraries and drivers @@ -333,6 +354,10 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_SX12XX is not set # CONFIG_PKG_USING_SIGNAL_LED is not set # CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set # CONFIG_PKG_USING_WM_LIBRARIES is not set # CONFIG_PKG_USING_KENDRYTE_SDK is not set # CONFIG_PKG_USING_INFRARED is not set @@ -350,6 +375,21 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_RPLIDAR is not set # CONFIG_PKG_USING_AS608 is not set # CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set # # miscellaneous packages @@ -386,6 +426,9 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_VT100 is not set # CONFIG_PKG_USING_ULAPACK is not set # CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set CONFIG_SOC_ES32F3696LT=y # @@ -426,6 +469,28 @@ CONFIG_BSP_USING_UART0=y # CONFIG_BSP_USING_CAN is not set # +# ADC Drivers +# +# CONFIG_BSP_USING_ADC is not set + +# +# RTC Drivers +# +# CONFIG_BSP_USING_RTC is not set + +# +# HWtimer Drivers +# +# CONFIG_BSP_USING_HWTIMER0 is not set +# CONFIG_BSP_USING_HWTIMER1 is not set + +# +# PWM Drivers +# +# CONFIG_BSP_USING_PWM0 is not set +# CONFIG_BSP_USING_PWM1 is not set + +# # Onboard Peripheral Drivers # diff --git a/bsp/essemi/es32f369x/README.md b/bsp/essemi/es32f369x/README.md index 5b20eacc33..100fc9aa60 100644 --- a/bsp/essemi/es32f369x/README.md +++ b/bsp/essemi/es32f369x/README.md @@ -13,9 +13,9 @@ ES-PDS-ES32F369x 是东软载波微电子官方推出的一款基于 ARM Cortex- 开发板外观如下图所示： -ES-PDS-ES32F369x-V1.2 +ES-PDS-ES32F369x-V1.3 - + 该开发板常用 **板载资源** 如下： @@ -32,15 +32,19 @@ ES-PDS-ES32F369x-V1.2 本 BSP 目前对外设的支持情况如下： -| **板载外设** | **支持情况** | **备注** | -| :----------- | :----------: | :--------------- | -| SPI FLASH | 支持 | SPI0 | -| **片上外设** | **支持情况** | **备注** | -| GPIO | 支持 | 50 GPIOs | -| UART | 支持 | UART0/1/2/3/4/5 | -| SPI | 支持 | SPI0/1/2 | -| I2C | 支持 | I2C0/1 | -| CAN | 支持 | CAN0 | +| **板载外设** | **支持情况** | **备注** | +| :----------- | :----------: | :-------------- | +| SPI FLASH | 支持 | SPI0 | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | 50 GPIOs | +| UART | 支持 | UART0/1/2/3/4/5 | +| SPI | 支持 | SPI0/1/2 | +| I2C | 支持 | I2C0/1 | +| CAN | 支持 | CAN0 | +| PWM | 支持 | PWM0/1 | +| TIMER | 支持 | TIMER0/1 | +| RTC | 支持 | RTC | +| ADC | 支持 | ADC0 | ### 1.2 注意事项 @@ -56,7 +60,7 @@ ES-PDS-ES32F369x-V1.2 使用ESlinkⅡ(mini)连接开发板如下图所示： -ESLinkⅡ(mini) + ES-PDS-ES32F369x-V1.2 +ESLinkⅡ(mini) + ES-PDS-ES32F369x-V1.3  diff --git a/bsp/essemi/es32f369x/drivers/Kconfig b/bsp/essemi/es32f369x/drivers/Kconfig index c96785cbea..a47aa30741 100644 --- a/bsp/essemi/es32f369x/drivers/Kconfig +++ b/bsp/essemi/es32f369x/drivers/Kconfig @@ -21,25 +21,25 @@ menu "Hardware Drivers Config" bool "Enable UART2 PC12/PD02(T/R)" select RT_USING_SERIAL default y - depends on !BSP_USING_HWTIMER1 config BSP_USING_UART3 bool "Enable UART3 PC04/PC05(T/R)" select RT_USING_SERIAL default n - depends on !BSP_USING_HWTIMER2 + depends on !BSP_USING_SPI2 - config BSP_USING_UART4 bool "Enable UART4 PB06/PB07(T/R)" select RT_USING_SERIAL default n depends on !BSP_USING_I2C0 + depends on !BSP_USING_PWM0 config BSP_USING_UART5 bool "Enable UART5 PB09/PB08(T/R)" select RT_USING_SERIAL default n + depends on !BSP_USING_PWM0 endmenu menu "SPI Drivers" @@ -60,16 +60,18 @@ menu "Hardware Drivers Config" select RT_USING_SPI select RT_USING_PIN default n + depends on !BSP_USING_UART3 endmenu menu "I2C Drivers" config BSP_USING_I2C0 - bool "Enable I2C0 BUS PB08/PB09(SCL/SDA)" + bool "Enable I2C0 BUS PB06/PB07(SCL/SDA)" select RT_USING_I2C default n + depends on !BSP_USING_PWM0 config BSP_USING_I2C1 - bool "Enable I2C1 BUS PB10/PB11(SCL/SDA)" + bool "Enable I2C1 BUS PA05/PA06(SCL/SDA)" select RT_USING_I2C default n endmenu @@ -80,6 +82,47 @@ menu "Hardware Drivers Config" select RT_USING_CAN default n endmenu + + menu "ADC Drivers" + config BSP_USING_ADC + bool "Using ADC" + select RT_USING_ADC + default n + endmenu + + menu "RTC Drivers" + config BSP_USING_RTC + bool "Using RTC" + select RT_USING_RTC + default n + endmenu + + menu "HWtimer Drivers" + config BSP_USING_HWTIMER0 + bool "Using timer0" + select RT_USING_HWTIMER + default n + + config BSP_USING_HWTIMER1 + bool "Using timer1" + select RT_USING_HWTIMER + default n + endmenu + + menu "PWM Drivers" + config BSP_USING_PWM0 + bool "Using PWM0 PB06/PB07/PB08/PB09" + select RT_USING_PWM + default n + depends on !BSP_USING_CAN + depends on !BSP_USING_I2C0 + + config BSP_USING_PWM1 + bool "Using PWM1 PA00/PA01/PA02/PA03" + select RT_USING_PWM + default n + endmenu + endmenu menu "Onboard Peripheral Drivers" diff --git a/bsp/essemi/es32f369x/drivers/SConscript b/bsp/essemi/es32f369x/drivers/SConscript index db84e20b61..b8a39e8fac 100644 --- a/bsp/essemi/es32f369x/drivers/SConscript +++ b/bsp/essemi/es32f369x/drivers/SConscript @@ -28,6 +28,22 @@ if GetDepend('BSP_USING_I2C0') or GetDepend('BSP_USING_I2C1'): if GetDepend('BSP_USING_CAN'): src += ['drv_can.c'] +# add adc driver code +if GetDepend(['BSP_USING_ADC']): + src += ['drv_adc.c'] + +# add rtc driver code +if GetDepend(['BSP_USING_RTC']): + src += ['drv_rtc.c'] + +# add hwtimer driver code +if GetDepend('BSP_USING_HWTIMER0') or GetDepend('BSP_USING_HWTIMER1'): + src += ['drv_hwtimer.c'] + +# add pwm driver code +if GetDepend('BSP_USING_PWM0') or GetDepend('BSP_USING_PWM1'): + src += ['drv_pwm.c'] + CPPPATH = [cwd] group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH) diff --git a/bsp/essemi/es32f369x/drivers/board.h b/bsp/essemi/es32f369x/drivers/board.h index 7df17f1671..628c2f87fd 100644 --- a/bsp/essemi/es32f369x/drivers/board.h +++ b/bsp/essemi/es32f369x/drivers/board.h @@ -14,7 +14,7 @@ #include <es32f36xx.h> -#define ES32F3_SRAM_SIZE 0x80000 +#define ES32F3_SRAM_SIZE 0x18000 #define ES32F3_SRAM_END (0x20000000 + ES32F3_SRAM_SIZE) #if defined(__CC_ARM) || defined(__CLANG_ARM) diff --git a/bsp/essemi/es32f369x/drivers/drv_adc.c b/bsp/essemi/es32f369x/drivers/drv_adc.c new file mode 100644 index 0000000000..6476aebd09 --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_adc.c @@ -0,0 +1,194 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-04-03 wangyq the first version + * 2019-11-01 wangyq update libraries + */ + +#include <rthw.h> +#include <rtthread.h> +#include <rtdevice.h> +#include "board.h" +#include "drv_adc.h" +#include <ald_gpio.h> +#include <ald_adc.h> + +#ifdef RT_USING_ADC + +/* define adc instance */ +static struct rt_adc_device _device_adc0; + +/* enable or disable adc */ +static rt_err_t es32f3_adc_enabled(struct rt_adc_device *device, rt_uint32_t channel, rt_bool_t enabled) +{ + adc_handle_t *_hadc = (adc_handle_t *)device->parent.user_data; + + RT_ASSERT(device != RT_NULL); + + if (enabled) + { + ADC_ENABLE(_hadc); ; + } + else + { + ADC_DISABLE(_hadc); + } + + return RT_EOK; +} + +static adc_channel_t es32f3_adc_get_channel(rt_uint32_t channel) +{ + adc_channel_t es32f3_channel; + gpio_init_t gpio_initstruct; + + /* Initialize ADC pin */ + gpio_initstruct.mode = GPIO_MODE_INPUT; + gpio_initstruct.pupd = GPIO_FLOATING; + gpio_initstruct.podrv = GPIO_OUT_DRIVE_1; + gpio_initstruct.nodrv = GPIO_OUT_DRIVE_1; + gpio_initstruct.flt = GPIO_FILTER_DISABLE; + gpio_initstruct.type = GPIO_TYPE_CMOS; + gpio_initstruct.func = GPIO_FUNC_0; + + /* select gpio pin as adc function */ + switch (channel) + { + case 0: + es32f3_channel = ADC_CHANNEL_0; + ald_gpio_init(GPIOC, GPIO_PIN_0, &gpio_initstruct); + break; + case 1: + es32f3_channel = ADC_CHANNEL_1; + ald_gpio_init(GPIOC, GPIO_PIN_1, &gpio_initstruct); + break; + case 2: + es32f3_channel = ADC_CHANNEL_2; + ald_gpio_init(GPIOC, GPIO_PIN_2, &gpio_initstruct); + break; + case 3: + es32f3_channel = ADC_CHANNEL_3; + ald_gpio_init(GPIOC, GPIO_PIN_3, &gpio_initstruct); + break; + case 4: + es32f3_channel = ADC_CHANNEL_4; + ald_gpio_init(GPIOA, GPIO_PIN_0, &gpio_initstruct); + break; + case 5: + es32f3_channel = ADC_CHANNEL_5; + ald_gpio_init(GPIOA, GPIO_PIN_1, &gpio_initstruct); + break; + case 6: + es32f3_channel = ADC_CHANNEL_6; + ald_gpio_init(GPIOA, GPIO_PIN_2, &gpio_initstruct); + break; + case 7: + es32f3_channel = ADC_CHANNEL_7; + ald_gpio_init(GPIOA, GPIO_PIN_3, &gpio_initstruct); + break; + case 8: + es32f3_channel = ADC_CHANNEL_8; + ald_gpio_init(GPIOA, GPIO_PIN_4, &gpio_initstruct); + break; + case 9: + es32f3_channel = ADC_CHANNEL_9; + ald_gpio_init(GPIOA, GPIO_PIN_5, &gpio_initstruct); + break; + case 10: + es32f3_channel = ADC_CHANNEL_10; + ald_gpio_init(GPIOA, GPIO_PIN_6, &gpio_initstruct); + break; + case 11: + es32f3_channel = ADC_CHANNEL_11; + ald_gpio_init(GPIOA, GPIO_PIN_7, &gpio_initstruct); + break; + case 12: + es32f3_channel = ADC_CHANNEL_12; + ald_gpio_init(GPIOC, GPIO_PIN_4, &gpio_initstruct); + break; + case 13: + es32f3_channel = ADC_CHANNEL_13; + ald_gpio_init(GPIOC, GPIO_PIN_5, &gpio_initstruct); + break; + case 14: + es32f3_channel = ADC_CHANNEL_14; + ald_gpio_init(GPIOB, GPIO_PIN_0, &gpio_initstruct); + break; + case 15: + es32f3_channel = ADC_CHANNEL_15; + ald_gpio_init(GPIOB, GPIO_PIN_1, &gpio_initstruct); + break; + case 16: + es32f3_channel = ADC_CHANNEL_16; + break; + case 17: + es32f3_channel = ADC_CHANNEL_17; + break; + case 18: + es32f3_channel = ADC_CHANNEL_18; + break; + default: + break; + } + + return es32f3_channel; +} + +static rt_err_t es32f3_get_adc_value(struct rt_adc_device *device, rt_uint32_t channel, rt_uint32_t *value) +{ + adc_handle_t *_hadc = (adc_handle_t *)device->parent.user_data; + adc_nch_conf_t nm_config; + + RT_ASSERT(device != RT_NULL); + RT_ASSERT(value != RT_NULL); + + /* config adc channel */ + nm_config.channel = es32f3_adc_get_channel(channel); + nm_config.rank = ADC_NCH_RANK_1; + nm_config.samp_time = ADC_SAMPLETIME_4; + ald_adc_normal_channel_config(_hadc, &nm_config); + + ald_adc_normal_start(_hadc); + + if (ald_adc_normal_poll_for_conversion(_hadc, 5000) == OK) + *value = ald_adc_normal_get_value(_hadc); + + return RT_EOK; +} + +static const struct rt_adc_ops es32f3_adc_ops = +{ + es32f3_adc_enabled, + es32f3_get_adc_value, +}; + +int rt_hw_adc_init(void) +{ + int result = RT_EOK; + static adc_handle_t _h_adc0; + + /* adc function initialization */ + _h_adc0.perh = ADC0; + _h_adc0.init.data_align = ADC_DATAALIGN_RIGHT; + _h_adc0.init.scan_mode = DISABLE; + _h_adc0.init.cont_mode = DISABLE; + _h_adc0.init.disc_mode = ADC_ALL_DISABLE; + _h_adc0.init.disc_nbr = ADC_DISC_NBR_1; + _h_adc0.init.conv_res = ADC_CONV_RES_10; + _h_adc0.init.clk_div = ADC_CKDIV_128; + _h_adc0.init.nche_sel = ADC_NCHESEL_MODE_ALL; + _h_adc0.init.neg_ref = ADC_NEG_REF_VSS; + _h_adc0.init.pos_ref = ADC_POS_REF_VDD; + ald_adc_init(&_h_adc0); + + rt_hw_adc_register(&_device_adc0, "adc0", &es32f3_adc_ops, &_h_adc0); + + return result; +} +INIT_BOARD_EXPORT(rt_hw_adc_init); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_adc.h b/bsp/essemi/es32f369x/drivers/drv_adc.h new file mode 100644 index 0000000000..eaddd67407 --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_adc.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-04-03 wangyq the first version + */ + +#ifndef DRV_ADC_H__ +#define DRV_ADC_H__ + +int rt_hw_adc_init(void); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_gpio.c b/bsp/essemi/es32f369x/drivers/drv_gpio.c index 37a24d956c..fa39a31ea5 100644 --- a/bsp/essemi/es32f369x/drivers/drv_gpio.c +++ b/bsp/essemi/es32f369x/drivers/drv_gpio.c @@ -17,10 +17,10 @@ #ifdef RT_USING_PIN -#define __ES32F0_PIN(index, gpio, gpio_index) {index, GPIO##gpio, GPIO_PIN_##gpio_index} -#define __ES32F0_PIN_DEFAULT {-1, 0, 0} +#define __ES32F3_PIN(index, gpio, gpio_index) {index, GPIO##gpio, GPIO_PIN_##gpio_index} +#define __ES32F3_PIN_DEFAULT {-1, 0, 0} -/* ES32F0 GPIO driver */ +/* ES32F3 GPIO driver */ struct pin_index { int index; @@ -30,71 +30,71 @@ struct pin_index static const struct pin_index pins[] = { - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN(2, C, 13), - __ES32F0_PIN(3, C, 14), - __ES32F0_PIN(4, C, 15), - __ES32F0_PIN(5, H, 0), - __ES32F0_PIN(6, H, 1), - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN(8, C, 0), - __ES32F0_PIN(9, C, 1), - __ES32F0_PIN(10, C, 2), - __ES32F0_PIN(11, C, 3), - __ES32F0_PIN(12, H, 3), - __ES32F0_PIN(13, H, 4), - __ES32F0_PIN(14, A, 0), - __ES32F0_PIN(15, A, 1), - __ES32F0_PIN(16, A, 2), - __ES32F0_PIN(17, A, 3), - __ES32F0_PIN(18, F, 0), - __ES32F0_PIN(19, F, 1), - __ES32F0_PIN(20, A, 4), - __ES32F0_PIN(21, A, 5), - __ES32F0_PIN(22, A, 6), - __ES32F0_PIN(23, A, 7), - __ES32F0_PIN(24, C, 4), - __ES32F0_PIN(25, C, 5), - __ES32F0_PIN(26, B, 0), - __ES32F0_PIN(27, B, 1), - __ES32F0_PIN(28, B, 2), - __ES32F0_PIN(29, B, 10), - __ES32F0_PIN(30, B, 11), - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN(33, B, 12), - __ES32F0_PIN(34, B, 13), - __ES32F0_PIN(35, B, 14), - __ES32F0_PIN(36, B, 15), - __ES32F0_PIN(37, C, 6), - __ES32F0_PIN(38, C, 7), - __ES32F0_PIN(39, C, 8), - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN(46, A, 13), - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN(49, A, 14), - __ES32F0_PIN(50, A, 15), - __ES32F0_PIN(51, C, 10), - __ES32F0_PIN(52, C, 11), - __ES32F0_PIN(53, C, 12), - __ES32F0_PIN(54, D, 2), - __ES32F0_PIN(55, B, 3), - __ES32F0_PIN(56, B, 4), - __ES32F0_PIN(57, B, 5), - __ES32F0_PIN(58, B, 6), - __ES32F0_PIN(59, B, 7), - __ES32F0_PIN(60, H, 2), - __ES32F0_PIN(61, B, 8), - __ES32F0_PIN(62, B, 9), - __ES32F0_PIN_DEFAULT, - __ES32F0_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN(2, C, 13), + __ES32F3_PIN(3, C, 14), + __ES32F3_PIN(4, C, 15), + __ES32F3_PIN(5, H, 0), + __ES32F3_PIN(6, H, 1), + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN(8, C, 0), + __ES32F3_PIN(9, C, 1), + __ES32F3_PIN(10, C, 2), + __ES32F3_PIN(11, C, 3), + __ES32F3_PIN(12, H, 3), + __ES32F3_PIN(13, H, 4), + __ES32F3_PIN(14, A, 0), + __ES32F3_PIN(15, A, 1), + __ES32F3_PIN(16, A, 2), + __ES32F3_PIN(17, A, 3), + __ES32F3_PIN(18, F, 0), + __ES32F3_PIN(19, F, 1), + __ES32F3_PIN(20, A, 4), + __ES32F3_PIN(21, A, 5), + __ES32F3_PIN(22, A, 6), + __ES32F3_PIN(23, A, 7), + __ES32F3_PIN(24, C, 4), + __ES32F3_PIN(25, C, 5), + __ES32F3_PIN(26, B, 0), + __ES32F3_PIN(27, B, 1), + __ES32F3_PIN(28, B, 2), + __ES32F3_PIN(29, B, 10), + __ES32F3_PIN(30, B, 11), + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN(33, B, 12), + __ES32F3_PIN(34, B, 13), + __ES32F3_PIN(35, B, 14), + __ES32F3_PIN(36, B, 15), + __ES32F3_PIN(37, C, 6), + __ES32F3_PIN(38, C, 7), + __ES32F3_PIN(39, C, 8), + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN(46, A, 13), + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN(49, A, 14), + __ES32F3_PIN(50, A, 15), + __ES32F3_PIN(51, C, 10), + __ES32F3_PIN(52, C, 11), + __ES32F3_PIN(53, C, 12), + __ES32F3_PIN(54, D, 2), + __ES32F3_PIN(55, B, 3), + __ES32F3_PIN(56, B, 4), + __ES32F3_PIN(57, B, 5), + __ES32F3_PIN(58, B, 6), + __ES32F3_PIN(59, B, 7), + __ES32F3_PIN(60, H, 2), + __ES32F3_PIN(61, B, 8), + __ES32F3_PIN(62, B, 9), + __ES32F3_PIN_DEFAULT, + __ES32F3_PIN_DEFAULT, }; struct pin_irq_map diff --git a/bsp/essemi/es32f369x/drivers/drv_hwtimer.c b/bsp/essemi/es32f369x/drivers/drv_hwtimer.c new file mode 100644 index 0000000000..f693137ae7 --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_hwtimer.c @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-3-19 wangyq the first version + * 2019-11-01 wangyq update libraries + */ + +#include <rthw.h> +#include <rtthread.h> +#include <rtdevice.h> +#include <drv_hwtimer.h> +#include <board.h> +#include <ald_cmu.h> +#include <ald_timer.h> + +#ifdef RT_USING_HWTIMER + +struct es32f3_hwtimer_dev +{ + rt_hwtimer_t parent; + timer_handle_t *hwtimer_periph; + IRQn_Type IRQn; +}; + +#ifdef BSP_USING_HWTIMER0 +static struct es32f3_hwtimer_dev hwtimer0; + +void BS16T0_Handler(void) +{ + ald_timer_clear_flag_status(hwtimer0.hwtimer_periph, TIMER_FLAG_UPDATE); + rt_device_hwtimer_isr(&hwtimer0.parent); + + if (HWTIMER_MODE_ONESHOT == hwtimer0.parent.mode) + { + ald_timer_base_stop(hwtimer0.hwtimer_periph); + } +} +#endif + +#ifdef BSP_USING_HWTIMER1 +static struct es32f3_hwtimer_dev hwtimer1; +/* can not use when UART2 Handler is enabled */ +void BS16T1_Handler(void) +{ + /* if BS16T1 it */ + if (ald_timer_get_it_status(hwtimer1.hwtimer_periph, TIMER_IT_UPDATE) && + ald_timer_get_flag_status(hwtimer1.hwtimer_periph, TIMER_FLAG_UPDATE)) + { + ald_timer_clear_flag_status(hwtimer1.hwtimer_periph, TIMER_FLAG_UPDATE); + rt_device_hwtimer_isr(&hwtimer1.parent); + + if (HWTIMER_MODE_ONESHOT == hwtimer1.parent.mode) + { + ald_timer_base_stop(hwtimer1.hwtimer_periph); + } + } +} +#endif + +static struct rt_hwtimer_info es32f3_hwtimer_info = +{ + 96000000, /* maximum count frequency */ + 1, /* minimum count frequency */ + 65535, /* counter maximum value */ + HWTIMER_CNTMODE_UP +}; + +static void es32f3_hwtimer_init(rt_hwtimer_t *timer, rt_uint32_t state) +{ + struct es32f3_hwtimer_dev *hwtimer = (struct es32f3_hwtimer_dev *)timer->parent.user_data; + + RT_ASSERT(hwtimer != RT_NULL); + + if (1 == state) + { + ald_timer_base_init(hwtimer->hwtimer_periph); + ald_timer_interrupt_config(hwtimer->hwtimer_periph, TIMER_IT_UPDATE, ENABLE); + NVIC_EnableIRQ(hwtimer->IRQn); + } + hwtimer->parent.freq = ald_cmu_get_pclk1_clock(); + es32f3_hwtimer_info.maxfreq = ald_cmu_get_pclk1_clock(); + es32f3_hwtimer_info.minfreq = ald_cmu_get_pclk1_clock(); +} + +static rt_err_t es32f3_hwtimer_start(rt_hwtimer_t *timer, + rt_uint32_t cnt, + rt_hwtimer_mode_t mode) +{ + struct es32f3_hwtimer_dev *hwtimer = (struct es32f3_hwtimer_dev *)timer->parent.user_data; + + RT_ASSERT(hwtimer != RT_NULL); + + WRITE_REG(hwtimer->hwtimer_periph->perh->AR, cnt); + ald_timer_base_start(hwtimer->hwtimer_periph); + + return RT_EOK; +} + +static void es32f3_hwtimer_stop(rt_hwtimer_t *timer) +{ + struct es32f3_hwtimer_dev *hwtimer = (struct es32f3_hwtimer_dev *)timer->parent.user_data; + + RT_ASSERT(hwtimer != RT_NULL); + + ald_timer_base_stop(hwtimer->hwtimer_periph); +} + +static rt_uint32_t es32f3_hwtimer_count_get(rt_hwtimer_t *timer) +{ + struct es32f3_hwtimer_dev *hwtimer = (struct es32f3_hwtimer_dev *)timer->parent.user_data; + uint32_t hwtimer_count = 0; + + RT_ASSERT(hwtimer != RT_NULL); + + hwtimer_count = READ_REG(hwtimer->hwtimer_periph->perh->COUNT); + + return hwtimer_count; +} + +static rt_err_t es32f3_hwtimer_control(rt_hwtimer_t *timer, + rt_uint32_t cmd, + void *args) +{ + rt_err_t ret = RT_EOK; + rt_uint32_t freq = 0; + struct es32f3_hwtimer_dev *hwtimer = (struct es32f3_hwtimer_dev *)timer->parent.user_data; + + RT_ASSERT(hwtimer != RT_NULL); + + switch (cmd) + { + case HWTIMER_CTRL_FREQ_SET: + freq = *(rt_uint32_t *)args; + if (freq != ald_cmu_get_pclk1_clock()) + { + ret = -RT_ERROR; + } + break; + + case HWTIMER_CTRL_STOP: + ald_timer_base_stop(hwtimer->hwtimer_periph); + break; + + default: + ret = RT_EINVAL; + break; + } + + return ret; +} + +static struct rt_hwtimer_ops es32f3_hwtimer_ops = +{ + es32f3_hwtimer_init, + es32f3_hwtimer_start, + es32f3_hwtimer_stop, + es32f3_hwtimer_count_get, + es32f3_hwtimer_control +}; + +int rt_hw_hwtimer_init(void) +{ + rt_err_t ret = RT_EOK; + +#ifdef BSP_USING_HWTIMER0 + static timer_handle_t _hwtimer_periph0; + _hwtimer_periph0.perh = BS16T0; + hwtimer0.IRQn = BS16T0_IRQn; + hwtimer0.hwtimer_periph = &_hwtimer_periph0; + hwtimer0.parent.info = &es32f3_hwtimer_info; + hwtimer0.parent.ops = &es32f3_hwtimer_ops; + ret = rt_device_hwtimer_register(&hwtimer0.parent, "timer0", &hwtimer0); +#endif + +#ifdef BSP_USING_HWTIMER1 + static timer_handle_t _hwtimer_periph1; + _hwtimer_periph1.perh = BS16T1; + hwtimer1.IRQn = BS16T1_IRQn; + hwtimer1.hwtimer_periph = &_hwtimer_periph1; + hwtimer1.parent.info = &es32f3_hwtimer_info; + hwtimer1.parent.ops = &es32f3_hwtimer_ops; + ret = rt_device_hwtimer_register(&hwtimer1.parent, "timer1", &hwtimer1); +#endif + + return ret; +} +INIT_BOARD_EXPORT(rt_hw_hwtimer_init); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_hwtimer.h b/bsp/essemi/es32f369x/drivers/drv_hwtimer.h new file mode 100644 index 0000000000..e18d580fbd --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_hwtimer.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-3-19 wangyq the first version + */ + +#ifndef DRV_HWTIMER_H__ +#define DRV_HWTIMER_H__ + +int rt_hw_hwtimer_init(void); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_i2c.c b/bsp/essemi/es32f369x/drivers/drv_i2c.c index 4cf0a7b031..3ab68bae9e 100644 --- a/bsp/essemi/es32f369x/drivers/drv_i2c.c +++ b/bsp/essemi/es32f369x/drivers/drv_i2c.c @@ -16,6 +16,7 @@ #include "drv_i2c.h" #include <ald_i2c.h> #include <ald_gpio.h> +#include <rtdbg.h> #ifdef RT_USING_I2C @@ -55,8 +56,8 @@ static void _i2c_init(void) ald_i2c_reset(&_h_i2c0); ald_i2c_init(&_h_i2c0); - /* PB8->I2C0_SCL, PB9->I2C0_SDA */ - ald_gpio_init(GPIOB, GPIO_PIN_8 | GPIO_PIN_9, &gpio_instruct); + /* PB06->I2C0_SCL, PB07->I2C0_SDA */ + ald_gpio_init(GPIOB, GPIO_PIN_6 | GPIO_PIN_7, &gpio_instruct); #endif #ifdef BSP_USING_I2C1 @@ -90,7 +91,7 @@ static rt_size_t es32f3_master_xfer(struct rt_i2c_bus_device *bus, { if (ald_i2c_master_recv(bus->priv, msg->addr << 1, msg->buf, msg->len, TIMEOUT) != 0) { - i2c_dbg("i2c bus write failed,i2c bus stop!\n"); + LOG_E("i2c bus write failed,i2c bus stop!\n"); goto out; } } @@ -98,7 +99,7 @@ static rt_size_t es32f3_master_xfer(struct rt_i2c_bus_device *bus, { if (ald_i2c_master_send(bus->priv, msg->addr << 1, msg->buf, msg->len, TIMEOUT) != 0) { - i2c_dbg("i2c bus write failed,i2c bus stop!\n"); + LOG_E("i2c bus write failed,i2c bus stop!\n"); goto out; } } @@ -107,7 +108,7 @@ static rt_size_t es32f3_master_xfer(struct rt_i2c_bus_device *bus, ret = i; out: - i2c_dbg("send stop condition\n"); + LOG_E("send stop condition\n"); return ret; } diff --git a/bsp/essemi/es32f369x/drivers/drv_pwm.c b/bsp/essemi/es32f369x/drivers/drv_pwm.c new file mode 100644 index 0000000000..e033e47cec --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_pwm.c @@ -0,0 +1,171 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-03-11 wangyq the first version + * 2019-11-01 wangyq update libraries + */ + +#include <rthw.h> +#include <rtthread.h> +#include <rtdevice.h> +#include <board.h> +#include <ald_cmu.h> +#include <ald_timer.h> +#include <ald_gpio.h> + +static void pwm_set_freq(timer_handle_t *timer_initstruct, uint32_t ns) +{ + uint64_t _arr = (uint64_t)ald_cmu_get_pclk1_clock() * ns / 1000000000 / + (timer_initstruct->init.prescaler + 1); + + WRITE_REG(timer_initstruct->perh->AR, (uint32_t)_arr); + timer_initstruct->init.period = (uint32_t)_arr; +} + +static void pwm_set_duty(timer_handle_t *timer_initstruct, timer_channel_t ch, uint32_t ns) +{ + uint64_t tmp = (uint64_t)ald_cmu_get_pclk1_clock() * ns / 1000000000 / + (timer_initstruct->init.prescaler + 1); + + if (ch == TIMER_CHANNEL_1) + WRITE_REG(timer_initstruct->perh->CCVAL1, (uint32_t)tmp); + else if (ch == TIMER_CHANNEL_2) + WRITE_REG(timer_initstruct->perh->CCVAL2, (uint32_t)tmp); + else if (ch == TIMER_CHANNEL_3) + WRITE_REG(timer_initstruct->perh->CCVAL3, (uint32_t)tmp); + else if (ch == TIMER_CHANNEL_4) + WRITE_REG(timer_initstruct->perh->CCVAL4, (uint32_t)tmp); +} + +static rt_err_t es32f3_pwm_control(struct rt_device_pwm *device, int cmd, void *arg) +{ + rt_err_t ret = RT_EOK; + uint32_t _ccep; + timer_channel_t pwm_channel; + timer_oc_init_t tim_ocinit; + timer_handle_t *timer_initstruct = (timer_handle_t *)device->parent.user_data; + struct rt_pwm_configuration *cfg = (struct rt_pwm_configuration *)arg; + + RT_ASSERT(timer_initstruct != RT_NULL); + + tim_ocinit.oc_mode = TIMER_OC_MODE_PWM1; + tim_ocinit.oc_polarity = TIMER_OC_POLARITY_HIGH; + tim_ocinit.oc_fast_en = DISABLE; + tim_ocinit.ocn_polarity = TIMER_OCN_POLARITY_HIGH; + tim_ocinit.ocn_idle = TIMER_OCN_IDLE_RESET; + tim_ocinit.oc_idle = TIMER_OC_IDLE_RESET; + + /* select pwm output channel */ + if (1 == cfg->channel) + pwm_channel = TIMER_CHANNEL_1; + + else if (2 == cfg->channel) + pwm_channel = TIMER_CHANNEL_2; + + else if (3 == cfg->channel) + pwm_channel = TIMER_CHANNEL_3; + + else if (4 == cfg->channel) + pwm_channel = TIMER_CHANNEL_4; + + else + return RT_EINVAL; + + switch (cmd) + { + case PWM_CMD_ENABLE: + ald_timer_pwm_start(timer_initstruct, pwm_channel); + break; + + case PWM_CMD_DISABLE: + ald_timer_pwm_stop(timer_initstruct, pwm_channel); + break; + + case PWM_CMD_SET: + _ccep = timer_initstruct->perh->CCEP; + /* count registers max 0xFFFF, auto adjust prescaler */ + do + { + pwm_set_freq(timer_initstruct, cfg->period); + timer_initstruct->init.prescaler ++; + } + while (timer_initstruct->init.period > 0xFFFF); + /* update prescaler */ + WRITE_REG(timer_initstruct->perh->PRES, --timer_initstruct->init.prescaler); + ald_timer_oc_config_channel(timer_initstruct, &tim_ocinit, pwm_channel); + pwm_set_duty(timer_initstruct, pwm_channel, cfg->pulse); + timer_initstruct->perh->CCEP = _ccep; + break; + + case PWM_CMD_GET: + cfg->pulse = ald_timer_read_capture_value(timer_initstruct, pwm_channel) * 100 / + READ_REG(timer_initstruct->perh->AR); + break; + + default: + break; + } + return ret; +} + +const static struct rt_pwm_ops es32f3_pwm_ops = +{ + es32f3_pwm_control +}; + +int rt_hw_pwm_init(void) +{ + rt_err_t ret = RT_EOK; + gpio_init_t gpio_initstructure; + + gpio_initstructure.mode = GPIO_MODE_OUTPUT; + gpio_initstructure.odos = GPIO_PUSH_PULL; + gpio_initstructure.pupd = GPIO_PUSH_UP; + gpio_initstructure.podrv = GPIO_OUT_DRIVE_6; + gpio_initstructure.nodrv = GPIO_OUT_DRIVE_6; + gpio_initstructure.flt = GPIO_FILTER_DISABLE; + gpio_initstructure.type = GPIO_TYPE_TTL; + +#ifdef BSP_USING_PWM0 /* 4 channels */ + static struct rt_device_pwm pwm_dev0; + static timer_handle_t timer_initstruct0; + + timer_initstruct0.perh = GP16C4T0; + ald_timer_pwm_init(&timer_initstruct0); + + /* gpio initialization */ + gpio_initstructure.func = GPIO_FUNC_2; + ald_gpio_init(GPIOB, GPIO_PIN_6, &gpio_initstructure); + ald_gpio_init(GPIOB, GPIO_PIN_7, &gpio_initstructure); + ald_gpio_init(GPIOB, GPIO_PIN_8, &gpio_initstructure); + ald_gpio_init(GPIOB, GPIO_PIN_9, &gpio_initstructure); + + ret = rt_device_pwm_register(&pwm_dev0, "pwm0", &es32f3_pwm_ops, + &timer_initstruct0); +#endif + +#ifdef BSP_USING_PWM1 /* 4 channels */ + static struct rt_device_pwm pwm_dev1; + static timer_handle_t timer_initstruct1; + + timer_initstruct1.perh = GP16C4T1; + ald_timer_pwm_init(&timer_initstruct1); + + /* gpio initialization */ + gpio_initstructure.func = GPIO_FUNC_5; + ald_gpio_init(GPIOA, GPIO_PIN_0, &gpio_initstructure); + ald_gpio_init(GPIOA, GPIO_PIN_1, &gpio_initstructure); + ald_gpio_init(GPIOA, GPIO_PIN_2, &gpio_initstructure); + ald_gpio_init(GPIOA, GPIO_PIN_3, &gpio_initstructure); + + ret = rt_device_pwm_register(&pwm_dev1, "pwm1", &es32f3_pwm_ops, + &timer_initstruct1); +#endif + + return ret; +} +INIT_DEVICE_EXPORT(rt_hw_pwm_init); diff --git a/bsp/essemi/es32f369x/drivers/drv_pwm.h b/bsp/essemi/es32f369x/drivers/drv_pwm.h new file mode 100644 index 0000000000..f4fcfe7cff --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_pwm.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-03-11 wangyq the first version + */ + +#ifndef DRV_PWM_H__ +#define DRV_PWM_H__ + +int rt_hw_pwm_init(void); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_rtc.c b/bsp/essemi/es32f369x/drivers/drv_rtc.c new file mode 100644 index 0000000000..32a68c3011 --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_rtc.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-03-22 wangyq the first version + * 2019-11-01 wangyq update libraries + */ + +#include <rthw.h> +#include <rtthread.h> +#include <rtdevice.h> +#include <string.h> +#include "board.h" +#include "drv_rtc.h" +#include <ald_cmu.h> +#include <ald_rtc.h> + +#ifdef RT_USING_RTC + +static void __rtc_init(rtc_init_t *init) +{ + assert_param(IS_RTC_HOUR_FORMAT(init->hour_format)); + assert_param(IS_RTC_OUTPUT_SEL(init->output)); + assert_param(IS_RTC_OUTPUT_POLARITY(init->output_polarity)); + + ald_rtc_reset(); + RTC_UNLOCK(); + + MODIFY_REG(RTC->CON, RTC_CON_HFM_MSK, init->hour_format << RTC_CON_HFM_POS); + MODIFY_REG(RTC->CON, RTC_CON_EOS_MSK, init->output << RTC_CON_EOS_POSS); + MODIFY_REG(RTC->CON, RTC_CON_POL_MSK, init->output_polarity << RTC_CON_POL_POS); + MODIFY_REG(RTC->PSR, RTC_PSR_SPRS_MSK, init->synch_pre_div << RTC_PSR_SPRS_POSS); + MODIFY_REG(RTC->PSR, RTC_PSR_APRS_MSK, init->asynch_pre_div << RTC_PSR_APRS_POSS); + + RTC_LOCK(); + return; +} + +static rt_err_t es32f0_rtc_control(rt_device_t dev, int cmd, void *args) +{ + rt_err_t result = RT_EOK; + + struct tm time_temp; + struct tm *pNow; + rtc_date_t date; + rtc_time_t time; + + switch (cmd) + { + case RT_DEVICE_CTRL_RTC_GET_TIME: + + ald_rtc_get_date_time(&date, &time, RTC_FORMAT_DEC); + time_temp.tm_sec = time.second; + time_temp.tm_min = time.minute; + time_temp.tm_hour = time.hour; + time_temp.tm_mday = date.day; + time_temp.tm_mon = date.month - 1; + time_temp.tm_year = date.year - 1900 + 2000; + *((time_t *)args) = mktime(&time_temp); + break; + + case RT_DEVICE_CTRL_RTC_SET_TIME: + + rt_enter_critical(); + /* converts calendar time time into local time. */ + pNow = localtime((const time_t *)args); + /* copy the statically located variable */ + memcpy(&time_temp, pNow, sizeof(struct tm)); + /* unlock scheduler. */ + rt_exit_critical(); + + time.hour = time_temp.tm_hour; + time.minute = time_temp.tm_min; + time.second = time_temp.tm_sec; + date.year = time_temp.tm_year + 1900 - 2000; + date.month = time_temp.tm_mon + 1; + date.day = time_temp.tm_mday; + ald_rtc_set_time(&time, RTC_FORMAT_DEC); + ald_rtc_set_date(&date, RTC_FORMAT_DEC); + /* start RTC */ + RTC_UNLOCK(); + SET_BIT(RTC->CON, RTC_CON_GO_MSK); + RTC_LOCK(); + break; + + case RT_DEVICE_CTRL_RTC_GET_ALARM: + break; + + case RT_DEVICE_CTRL_RTC_SET_ALARM: + break; + + default: + break; + } + + return result; +} + +#ifdef RT_USING_DEVICE_OPS +const static struct rt_device_ops es32f0_rtc_ops = +{ + RT_NULL, + RT_NULL, + RT_NULL, + RT_NULL, + RT_NULL, + es32f0_rtc_control +}; +#endif + +int rt_hw_rtc_init(void) +{ + rt_err_t ret = RT_EOK; + static struct rt_device rtc_dev; + rtc_init_t rtc_initstruct; + + /* enable external 32.768kHz */ + CMU_LOSC_ENABLE(); + ald_cmu_losc_safe_config(ENABLE); + /* set default time */ + RTC_UNLOCK(); + WRITE_REG(RTC->TIME, 0x134251); + WRITE_REG(RTC->DATE, 0x1190401); + RTC_LOCK(); + /* RTC function initialization */ + rtc_initstruct.hour_format = RTC_HOUR_FORMAT_24; + rtc_initstruct.asynch_pre_div = 0; + rtc_initstruct.synch_pre_div = 32767; + rtc_initstruct.output = RTC_OUTPUT_DISABLE; + __rtc_init(&rtc_initstruct); + + rtc_dev.type = RT_Device_Class_RTC; + rtc_dev.rx_indicate = RT_NULL; + rtc_dev.tx_complete = RT_NULL; + +#ifdef RT_USING_DEVICE_OPS + rtc_dev.ops = &es32f0_rtc_ops; +#else + rtc_dev.init = RT_NULL; + rtc_dev.open = RT_NULL; + rtc_dev.close = RT_NULL; + rtc_dev.read = RT_NULL; + rtc_dev.write = RT_NULL; + rtc_dev.control = es32f0_rtc_control; +#endif + + rtc_dev.user_data = RTC; + + ret = rt_device_register(&rtc_dev, "rtc", RT_DEVICE_FLAG_RDWR); + + return ret; +} +INIT_DEVICE_EXPORT(rt_hw_rtc_init); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_rtc.h b/bsp/essemi/es32f369x/drivers/drv_rtc.h new file mode 100644 index 0000000000..fe0264fb51 --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/drv_rtc.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-03-22 wangyq the first version + */ + +#ifndef DRV_RTC_H__ +#define DRV_RTC_H__ + +int rt_hw_rtc_init(void); + +#endif diff --git a/bsp/essemi/es32f369x/drivers/drv_uart.c b/bsp/essemi/es32f369x/drivers/drv_uart.c index b60ad32aa3..50d25474a0 100644 --- a/bsp/essemi/es32f369x/drivers/drv_uart.c +++ b/bsp/essemi/es32f369x/drivers/drv_uart.c @@ -39,7 +39,7 @@ static rt_err_t es32f3x_configure(struct rt_serial_device *serial, struct serial gpio_initstructure.odos = GPIO_PUSH_PULL; gpio_initstructure.pupd = GPIO_PUSH_UP; gpio_initstructure.podrv = GPIO_OUT_DRIVE_1; - gpio_initstructure.nodrv = GPIO_OUT_DRIVE_0_1; + gpio_initstructure.nodrv = GPIO_OUT_DRIVE_1; gpio_initstructure.flt = GPIO_FILTER_DISABLE; gpio_initstructure.type = GPIO_TYPE_TTL; diff --git a/bsp/essemi/es32f369x/drivers/linker_scripts/link.icf b/bsp/essemi/es32f369x/drivers/linker_scripts/link.icf new file mode 100644 index 0000000000..34d8124773 --- /dev/null +++ b/bsp/essemi/es32f369x/drivers/linker_scripts/link.icf @@ -0,0 +1,34 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__ = 0x000;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, last block HEAP };
+
+export symbol __ICFEDIT_region_RAM_start__;
+export symbol __ICFEDIT_region_RAM_end__;
\ No newline at end of file diff --git a/bsp/essemi/es32f369x/figures/ES-PDS-ES32F369x-V1.2.jpg b/bsp/essemi/es32f369x/figures/ES-PDS-ES32F369x-V1.2.jpg Binary files differdeleted file mode 100644 index e95b74a5e2..0000000000 --- a/bsp/essemi/es32f369x/figures/ES-PDS-ES32F369x-V1.2.jpg +++ /dev/null diff --git a/bsp/essemi/es32f369x/figures/ES-PDS-ES32F369x-V1.3.jpg b/bsp/essemi/es32f369x/figures/ES-PDS-ES32F369x-V1.3.jpg Binary files differnew file mode 100644 index 0000000000..e8d8cc653c --- /dev/null +++ b/bsp/essemi/es32f369x/figures/ES-PDS-ES32F369x-V1.3.jpg diff --git a/bsp/essemi/es32f369x/figures/ESLinkII-mini.jpg b/bsp/essemi/es32f369x/figures/ESLinkII-mini.jpg Binary files differindex 63026a89e1..6d3f0a51c2 100644 --- a/bsp/essemi/es32f369x/figures/ESLinkII-mini.jpg +++ b/bsp/essemi/es32f369x/figures/ESLinkII-mini.jpg diff --git a/bsp/essemi/es32f369x/project.ewd b/bsp/essemi/es32f369x/project.ewd new file mode 100644 index 0000000000..e9ca6c4c40 --- /dev/null +++ b/bsp/essemi/es32f369x/project.ewd @@ -0,0 +1,2810 @@ +<?xml version="1.0" encoding="UTF-8"?> +<project> + <fileVersion>3</fileVersion> + <configuration> + <name>rt-thread</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>1</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>28</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state></state> + </option> + <option> + <name>RunToEnable</name> + <state>0</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>8.11.1.13270</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>CMSISDAP_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>8.11.1.13270</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + <option> + <name>OCDownloadExtraImage</name> + <state>1</state> + </option> + <option> + <name>OCAttachSlave</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>CADI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CCadiMemory</name> + <state>1</state> + </option> + <option> + <name>Fast Model</name> + <state></state> + </option> + <option> + <name>CCADILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CCADILogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>4</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state></state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>IjetPreferETB</name> + <state>1</state> + </option> + <option> + <name>IjetTraceSettingsList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetTraceSizeList</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>FlashBoardPathSlave</name> + <state>0</state> + </option> + <option> + <name>CCIjetUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCIjetUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>5</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>3</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCSTLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCSTLinkCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCSTLinkUsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCSTLinkDAPNumber</name> + <state></state> + </option> + <option> + <name>CCSTLinkDebugAccessPortRadio</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>TIFET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVccTypeDefault</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVoltage</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CCMSPFetVCCDefault</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetTargetSettlingtime</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetRadioJtagSpeedType</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetConnection</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetUsbComPort</name> + <state>Automatic</state> + </option> + <option> + <name>CCMSPFetAllowAccessToBSL</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCMSPFetRadioEraseFlash</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>6</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCXds100BreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100DoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCXds100UpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCXds100CatchReset</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchData</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCXds100CpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCXds100SwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCXds100SwoClockEdit</name> + <state>1000</state> + </option> + <option> + <name>CCXds100HWResetDelay</name> + <state>0</state> + </option> + <option> + <name>CCXds100ResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100UsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCXds100UsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCXds100JtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100InterfaceRadio</name> + <state>2</state> + </option> + <option> + <name>CCXds100InterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCXds100ProbeList</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>CCXds100SWOPortRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100SWOPort</name> + <state>1</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> + <configuration> + <name>Release</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>28</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state></state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>8.11.1.13270</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>ARMSIM_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state></state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state></state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + <option> + <name>OCDownloadExtraImage</name> + <state>1</state> + </option> + <option> + <name>OCAttachSlave</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>CADI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCadiMemory</name> + <state>1</state> + </option> + <option> + <name>Fast Model</name> + <state></state> + </option> + <option> + <name>CCADILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CCADILogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state></state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>IjetPreferETB</name> + <state>1</state> + </option> + <option> + <name>IjetTraceSettingsList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetTraceSizeList</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>FlashBoardPathSlave</name> + <state>0</state> + </option> + <option> + <name>CCIjetUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCIjetUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>5</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>3</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCSTLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCSTLinkCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCSTLinkUsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCSTLinkDAPNumber</name> + <state></state> + </option> + <option> + <name>CCSTLinkDebugAccessPortRadio</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>TIFET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVccTypeDefault</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVoltage</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CCMSPFetVCCDefault</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetTargetSettlingtime</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetRadioJtagSpeedType</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetConnection</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetUsbComPort</name> + <state>Automatic</state> + </option> + <option> + <name>CCMSPFetAllowAccessToBSL</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCMSPFetRadioEraseFlash</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>6</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCXds100BreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100DoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCXds100UpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCXds100CatchReset</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchData</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCXds100CpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCXds100SwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCXds100SwoClockEdit</name> + <state>1000</state> + </option> + <option> + <name>CCXds100HWResetDelay</name> + <state>0</state> + </option> + <option> + <name>CCXds100ResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100UsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCXds100UsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCXds100JtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100InterfaceRadio</name> + <state>2</state> + </option> + <option> + <name>CCXds100InterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCXds100ProbeList</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>CCXds100SWOPortRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100SWOPort</name> + <state>1</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> +</project> diff --git a/bsp/essemi/es32f369x/project.ewp b/bsp/essemi/es32f369x/project.ewp new file mode 100644 index 0000000000..10c5034a9c --- /dev/null +++ b/bsp/essemi/es32f369x/project.ewp @@ -0,0 +1,2283 @@ +<project>
+ <fileVersion>3</fileVersion>
+ <configuration>
+ <name>rt-thread</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>28</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>rt-thread\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>rt-thread\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>rt-thread\List</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>Automatic choice of formatter, without multibyte support.</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>Automatic choice of formatter, without multibyte support.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>8.11.1.13270</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>8.11.1.13270</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>ES32F3696LT Eastsoft ES32F3696LT</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenStdoutInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralMisraVer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>RTConfigPath2</name>
+ <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>GBECoreSlave</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGUseCmsis</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGUseCmsisDspLib</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibThreads</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CoreVariant</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>GFPUDeviceSlave</name>
+ <state>ES32F3696LT Eastsoft ES32F3696LT</state>
+ </option>
+ <option>
+ <name>FPU2</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NrRegs</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NEON</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUCoreSlave2</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGCMSISPackSelectDevice</name>
+ </option>
+ <option>
+ <name>OgLibHeap</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGLibAdditionalLocale</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenLocaleTags</name>
+ <state />
+ </option>
+ <option>
+ <name>GenLocaleDisplayOnly</name>
+ <state />
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>34</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCOptimizationNoSizeConstraints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDefines</name>
+ <state />
+ <state>ES32F36xx</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state />
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>00000000</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state />
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state />
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m3</state>
+ <state>$PROJ_DIR$\..\..\..\components\finsh</state>
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
+ <state>$PROJ_DIR$\libraries\CMSIS\Include</state>
+ <state>$PROJ_DIR$\drivers</state>
+ <state>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Include</state>
+ <state>$PROJ_DIR$\.</state>
+ <state>$PROJ_DIR$\applications</state>
+ <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
+ <state>$PROJ_DIR$\..\..\..\include</state>
+ <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
+ <state>$PROJ_DIR$\libraries\CMSIS\Device\EastSoft\ES32F36xx\Include</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>CCPosIndRopi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndRwpi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndNoDynInit</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccLang</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCDialect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccAllowVLA</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccStaticDestr</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccCppInlineSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccFloatSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptStrategySlave</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCGuardCalls</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccExceptions2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccRTTI2</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>10</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state />
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state />
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state />
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state />
+ </option>
+ <option>
+ <name>AsmNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>3</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>../../../rtthread.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions />
+ <cmdline />
+ <hasPrio>0</hasPrio>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild />
+ <postbuild />
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>20</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>rtthread.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\drivers\linker_scripts\link.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkStdoutInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcFullSize</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIElfToolPostProcess</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogAutoLibSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogRedirSymbols</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogUnusedFragments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcReverseByteOrder</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcUseAsInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptInline</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsAllow</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsForce</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptMergeDuplSections</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptUseVfe</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptForceVfe</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackAnalysisEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackControlFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkStackCallGraphFile</name>
+ <state />
+ </option>
+ <option>
+ <name>CrcAlgorithm</name>
+ <version>1</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcUnitSize</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkThreadsSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogCallGraph</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile_AltDefault</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkHeapSelect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLocaleSelect</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state />
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ </configuration>
+ <configuration>
+ <name>Release</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>0</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>28</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>ExePath</name>
+ <state>Release\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>Release\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>Release\List</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state />
+ </option>
+ <option>
+ <name>Output description</name>
+ <state />
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state />
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>8.11.1.13270</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state />
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state />
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenStdoutInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralMisraVer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>RTConfigPath2</name>
+ <state />
+ </option>
+ <option>
+ <name>GBECoreSlave</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGUseCmsis</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGUseCmsisDspLib</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibThreads</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CoreVariant</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>GFPUDeviceSlave</name>
+ <state>-</state>
+ </option>
+ <option>
+ <name>FPU2</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NrRegs</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NEON</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUCoreSlave2</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGCMSISPackSelectDevice</name>
+ </option>
+ <option>
+ <name>OgLibHeap</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGLibAdditionalLocale</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenLocaleTags</name>
+ <state />
+ </option>
+ <option>
+ <name>GenLocaleDisplayOnly</name>
+ <state />
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>34</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>CCOptimizationNoSizeConstraints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDefines</name>
+ <state />
+ <state>ES32F36xx</state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state />
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state />
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>11111110</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state />
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state />
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state />
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m3</state>
+ <state>$PROJ_DIR$\..\..\..\components\finsh</state>
+ <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
+ <state>$PROJ_DIR$\libraries\CMSIS\Include</state>
+ <state>$PROJ_DIR$\drivers</state>
+ <state>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Include</state>
+ <state>$PROJ_DIR$\.</state>
+ <state>$PROJ_DIR$\applications</state>
+ <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
+ <state>$PROJ_DIR$\..\..\..\include</state>
+ <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
+ <state>$PROJ_DIR$\libraries\CMSIS\Device\EastSoft\ES32F36xx\Include</state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>CCPosIndRopi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndRwpi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndNoDynInit</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccLang</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCDialect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccAllowVLA</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccStaticDestr</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccCppInlineSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccFloatSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptStrategySlave</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCGuardCalls</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccExceptions2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccRTTI2</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>10</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state />
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state />
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state />
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state />
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state />
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state />
+ </option>
+ <option>
+ <name>AsmNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>3</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state />
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions />
+ <cmdline />
+ <hasPrio>0</hasPrio>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild />
+ <postbuild />
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>20</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>###Unitialized###</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>lnk0t.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state />
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkStdoutInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcFullSize</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIElfToolPostProcess</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogAutoLibSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogRedirSymbols</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogUnusedFragments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcReverseByteOrder</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcUseAsInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptInline</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsAllow</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsForce</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptMergeDuplSections</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptUseVfe</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptForceVfe</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackAnalysisEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackControlFile</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkStackCallGraphFile</name>
+ <state />
+ </option>
+ <option>
+ <name>CrcAlgorithm</name>
+ <version>1</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcUnitSize</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkThreadsSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogCallGraph</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile_AltDefault</name>
+ <state />
+ </option>
+ <option>
+ <name>IlinkEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkHeapSelect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLocaleSelect</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state />
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ </configuration>
+ <group>
+ <name>Kernel</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\clock.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\components.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\device.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\idle.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\irq.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\mem.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\object.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\signal.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\thread.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
+ </file>
+ </group>
+ <group>
+ <name>Applications</name>
+ <file>
+ <name>$PROJ_DIR$\applications\main.c</name>
+ </file>
+ </group>
+ <group>
+ <name>Drivers</name>
+ <file>
+ <name>$PROJ_DIR$\drivers\board.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\drivers\drv_gpio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\drivers\drv_uart.c</name>
+ </file>
+ </group>
+ <group>
+ <name>Libraries</name>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_acmp.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_adc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_bkpc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_calc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_can.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_cmu.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_crc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_crypt.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_dac.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_dma.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_ebi.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_flash.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_flash_ext.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_gpio.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_i2c.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_i2s.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_iap.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_nand.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_nor_lcd.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_pis.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_pmu.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_qspi.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_rmu.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_rtc.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_rtchw.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_spi.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_sram.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_timer.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_trng.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_tsense.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_uart.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_usb.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\ald_wdt.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\ES32F36xx_ALD_StdPeriph_Driver\Source\utils.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\libraries\CMSIS\Device\EastSoft\ES32F36xx\Startup\iar\startup_es32f36xx.s</name>
+ </file>
+ </group>
+ <group>
+ <name>cpu</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m3\cpuport.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m3\context_iar.S</name>
+ </file>
+ </group>
+ <group>
+ <name>DeviceDrivers</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
+ </file>
+ </group>
+ <group>
+ <name>finsh</name>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
+ </file>
+ <file>
+ <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
+ </file>
+ </group>
+ <group>
+ <name>libc</name>
+ </group>
+</project>
diff --git a/bsp/essemi/es32f369x/project.eww b/bsp/essemi/es32f369x/project.eww new file mode 100644 index 0000000000..c2cb02eb1e --- /dev/null +++ b/bsp/essemi/es32f369x/project.eww @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+ <project>
+ <path>$WS_DIR$\project.ewp</path>
+ </project>
+ <batchBuild/>
+</workspace>
+
+
diff --git a/bsp/essemi/es32f369x/project.uvprojx b/bsp/essemi/es32f369x/project.uvprojx index 1dbadb49a8..88764924d8 100644 --- a/bsp/essemi/es32f369x/project.uvprojx +++ b/bsp/essemi/es32f369x/project.uvprojx @@ -331,7 +331,7 @@ <MiscControls /> <Define>ES32F36xx</Define> <Undefine /> - <IncludePath>.;..\..\..\include;applications;.;drivers;libraries\CMSIS\Device\EastSoft\ES32F36xx\Include;libraries\CMSIS\Include;libraries\ES32F36xx_ALD_StdPeriph_Driver\Include;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common</IncludePath> + <IncludePath>.;..\..\..\include;applications;.;drivers;libraries\CMSIS\Device\EastSoft\ES32F36xx\Include;libraries\CMSIS\Include;libraries\ES32F36xx_ALD_StdPeriph_Driver\Include;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common</IncludePath> </VariousControls> </Cads> <Aads> @@ -797,27 +797,6 @@ <GroupName>DeviceDrivers</GroupName> <Files> <File> - <FileName>can.c</FileName> - <FileType>1</FileType> - <FilePath>..\..\..\components\drivers\can\can.c</FilePath> - </File> - </Files> - <Files> - <File> - <FileName>i2c_core.c</FileName> - <FileType>1</FileType> - <FilePath>..\..\..\components\drivers\i2c\i2c_core.c</FilePath> - </File> - </Files> - <Files> - <File> - <FileName>i2c_dev.c</FileName> - <FileType>1</FileType> - <FilePath>..\..\..\components\drivers\i2c\i2c_dev.c</FilePath> - </File> - </Files> - <Files> - <File> <FileName>pin.c</FileName> <FileType>1</FileType> <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath> diff --git a/bsp/essemi/es32f369x/rtconfig.h b/bsp/essemi/es32f369x/rtconfig.h index 928add7eb8..546a2b0087 100644 --- a/bsp/essemi/es32f369x/rtconfig.h +++ b/bsp/essemi/es32f369x/rtconfig.h @@ -39,7 +39,7 @@ #define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLE_DEVICE_NAME "uart0" -#define RT_VER_NUM 0x40002 +#define RT_VER_NUM 0x40003 /* RT-Thread Components */ @@ -76,8 +76,6 @@ #define RT_PIPE_BUFSZ 512 #define RT_USING_SERIAL #define RT_SERIAL_RB_BUFSZ 64 -#define RT_USING_CAN -#define RT_USING_I2C #define RT_USING_PIN /* Using USB */ @@ -166,6 +164,18 @@ /* CAN Drivers */ +/* ADC Drivers */ + + +/* RTC Drivers */ + + +/* HWtimer Drivers */ + + +/* PWM Drivers */ + + /* Onboard Peripheral Drivers */ /* Offboard Peripheral Drivers */ diff --git a/bsp/essemi/es32f369x/template.ewd b/bsp/essemi/es32f369x/template.ewd new file mode 100644 index 0000000000..43196dc3f1 --- /dev/null +++ b/bsp/essemi/es32f369x/template.ewd @@ -0,0 +1,2810 @@ +<?xml version="1.0" encoding="UTF-8"?> +<project> + <fileVersion>3</fileVersion> + <configuration> + <name>rt-thread</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>1</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>28</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\Eastsoft\ES32F3696LT.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>8.11.1.13270</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>CMSISDAP_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>8.11.1.13270</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\Eastsoft\FlashES32F3696x.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + <option> + <name>OCDownloadExtraImage</name> + <state>1</state> + </option> + <option> + <name>OCAttachSlave</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>CADI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CCadiMemory</name> + <state>1</state> + </option> + <option> + <name>Fast Model</name> + <state></state> + </option> + <option> + <name>CCADILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CCADILogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>4</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state>0</state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state></state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>IjetPreferETB</name> + <state>1</state> + </option> + <option> + <name>IjetTraceSettingsList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetTraceSizeList</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>FlashBoardPathSlave</name> + <state>0</state> + </option> + <option> + <name>CCIjetUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCIjetUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>5</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>3</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCSTLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCSTLinkCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCSTLinkUsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCSTLinkDAPNumber</name> + <state></state> + </option> + <option> + <name>CCSTLinkDebugAccessPortRadio</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>TIFET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVccTypeDefault</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVoltage</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CCMSPFetVCCDefault</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetTargetSettlingtime</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetRadioJtagSpeedType</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetConnection</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetUsbComPort</name> + <state>Automatic</state> + </option> + <option> + <name>CCMSPFetAllowAccessToBSL</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCMSPFetRadioEraseFlash</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>6</version> + <wantNonLocal>1</wantNonLocal> + <debug>1</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCXds100BreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100DoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCXds100UpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCXds100CatchReset</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchData</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCXds100CpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCXds100SwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCXds100SwoClockEdit</name> + <state>1000</state> + </option> + <option> + <name>CCXds100HWResetDelay</name> + <state>0</state> + </option> + <option> + <name>CCXds100ResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100UsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCXds100UsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCXds100JtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100InterfaceRadio</name> + <state>2</state> + </option> + <option> + <name>CCXds100InterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCXds100ProbeList</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>CCXds100SWOPortRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100SWOPort</name> + <state>1</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> + <configuration> + <name>Release</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>28</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state></state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>CExtraOptions</name> + <state></state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>8.11.1.13270</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>ARMSIM_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state></state> + </option> + <option> + <name>UseFlashLoader</name> + <state>1</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state></state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + <option> + <name>OCDownloadExtraImage</name> + <state>1</state> + </option> + <option> + <name>OCAttachSlave</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>CADI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCadiMemory</name> + <state>1</state> + </option> + <option> + <name>Fast Model</name> + <state></state> + </option> + <option> + <name>CCADILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CCADILogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCCMSISDAPUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>8</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state></state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchSFERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + <option> + <name>IjetPreferETB</name> + <state>1</state> + </option> + <option> + <name>IjetTraceSettingsList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetTraceSizeList</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>FlashBoardPathSlave</name> + <state>0</state> + </option> + <option> + <name>CCIjetUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCIjetUsbSerialNoSelect</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>5</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>4</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>3</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCSTLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCSTLinkCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkCatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCSTLinkUsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCSTLinkDAPNumber</name> + <state></state> + </option> + <option> + <name>CCSTLinkDebugAccessPortRadio</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>TIFET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVccTypeDefault</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetTargetVoltage</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CCMSPFetVCCDefault</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetTargetSettlingtime</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetRadioJtagSpeedType</name> + <state>1</state> + </option> + <option> + <name>CCMSPFetConnection</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCMSPFetUsbComPort</name> + <state>Automatic</state> + </option> + <option> + <name>CCMSPFetAllowAccessToBSL</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCMSPFetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCMSPFetRadioEraseFlash</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>6</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCXds100BreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100DoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCXds100UpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCXds100CatchReset</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchData</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchSFERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCXds100CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CCXds100CpuClockEdit</name> + <state></state> + </option> + <option> + <name>CCXds100SwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCXds100SwoClockEdit</name> + <state>1000</state> + </option> + <option> + <name>CCXds100HWResetDelay</name> + <state>0</state> + </option> + <option> + <name>CCXds100ResetList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100UsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCXds100UsbSerialNoSelect</name> + <state>0</state> + </option> + <option> + <name>CCXds100JtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCXds100InterfaceRadio</name> + <state>2</state> + </option> + <option> + <name>CCXds100InterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCXds100ProbeList</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>CCXds100SWOPortRadio</name> + <state>0</state> + </option> + <option> + <name>CCXds100SWOPort</name> + <state>1</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration> +</project> diff --git a/bsp/essemi/es32f369x/template.ewp b/bsp/essemi/es32f369x/template.ewp new file mode 100644 index 0000000000..88c22a3fde --- /dev/null +++ b/bsp/essemi/es32f369x/template.ewp @@ -0,0 +1,2024 @@ +<?xml version="1.0" encoding="UTF-8"?>
+<project>
+ <fileVersion>3</fileVersion>
+ <configuration>
+ <name>rt-thread</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>1</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>28</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>ExePath</name>
+ <state>rt-thread\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>rt-thread\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>rt-thread\List</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state>Automatic choice of formatter, without multibyte support.</state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state>Automatic choice of formatter, without multibyte support.</state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>8.11.1.13270</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state>8.11.1.13270</state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state>ES32F3696LT Eastsoft ES32F3696LT</state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenStdoutInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralMisraVer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>RTConfigPath2</name>
+ <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+ </option>
+ <option>
+ <name>GBECoreSlave</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGUseCmsis</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGUseCmsisDspLib</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibThreads</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CoreVariant</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>GFPUDeviceSlave</name>
+ <state>ES32F3696LT Eastsoft ES32F3696LT</state>
+ </option>
+ <option>
+ <name>FPU2</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NrRegs</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NEON</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUCoreSlave2</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGCMSISPackSelectDevice</name>
+ </option>
+ <option>
+ <name>OgLibHeap</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGLibAdditionalLocale</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenLocaleTags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>GenLocaleDisplayOnly</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>34</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>CCOptimizationNoSizeConstraints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state>Pa050</state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>00000000</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>CCPosIndRopi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndRwpi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndNoDynInit</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccLang</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCDialect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccAllowVLA</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccStaticDestr</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccCppInlineSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccFloatSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptStrategySlave</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCGuardCalls</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccExceptions2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccRTTI2</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>10</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state>$FILE_BNAME$.o</state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AsmNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>3</version>
+ <state>3</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state>../../../rtthread.bin</state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ <hasPrio>0</hasPrio>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>20</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>rtthread.out</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>$PROJ_DIR$\drivers\linker_scripts\link.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state>__iar_program_start</state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkStdoutInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcFullSize</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIElfToolPostProcess</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogAutoLibSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogRedirSymbols</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogUnusedFragments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcReverseByteOrder</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcUseAsInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptInline</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsAllow</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsForce</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptMergeDuplSections</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptUseVfe</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptForceVfe</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackAnalysisEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackControlFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkStackCallGraphFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CrcAlgorithm</name>
+ <version>1</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcUnitSize</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkThreadsSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogCallGraph</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile_AltDefault</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkHeapSelect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLocaleSelect</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>1</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ </configuration>
+ <configuration>
+ <name>Release</name>
+ <toolchain>
+ <name>ARM</name>
+ </toolchain>
+ <debug>0</debug>
+ <settings>
+ <name>General</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <version>28</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>ExePath</name>
+ <state>Release\Exe</state>
+ </option>
+ <option>
+ <name>ObjPath</name>
+ <state>Release\Obj</state>
+ </option>
+ <option>
+ <name>ListPath</name>
+ <state>Release\List</state>
+ </option>
+ <option>
+ <name>GEndianMode</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>Input description</name>
+ <state></state>
+ </option>
+ <option>
+ <name>Output description</name>
+ <state></state>
+ </option>
+ <option>
+ <name>GOutputBinary</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGCoreOrChip</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelect</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>GRuntimeLibSelectSlave</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>RTDescription</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OGProductVersion</name>
+ <state>8.11.1.13270</state>
+ </option>
+ <option>
+ <name>OGLastSavedByProductVersion</name>
+ <state></state>
+ </option>
+ <option>
+ <name>GeneralEnableMisra</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraVerbose</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGChipSelectEditMenu</name>
+ <state></state>
+ </option>
+ <option>
+ <name>GenLowLevelInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GEndianModeBE</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGBufferedTerminalOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenStdoutInterface</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>GeneralMisraVer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GeneralMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>RTConfigPath2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>GBECoreSlave</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGUseCmsis</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGUseCmsisDspLib</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GRuntimeLibThreads</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CoreVariant</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>GFPUDeviceSlave</name>
+ <state>-</state>
+ </option>
+ <option>
+ <name>FPU2</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NrRegs</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>NEON</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GFPUCoreSlave2</name>
+ <version>25</version>
+ <state>38</state>
+ </option>
+ <option>
+ <name>OGCMSISPackSelectDevice</name>
+ </option>
+ <option>
+ <name>OgLibHeap</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGLibAdditionalLocale</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGPrintfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfVariant</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OGScanfMultibyteSupport</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>GenLocaleTags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>GenLocaleDisplayOnly</name>
+ <state></state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>ICCARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>34</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>CCOptimizationNoSizeConstraints</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCPreprocFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocComments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPreprocLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMnemonics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListCMessages</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCListAssSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagSuppress</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagRemark</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagWarning</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCDiagError</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCAllowList</name>
+ <version>1</version>
+ <state>11111110</state>
+ </option>
+ <option>
+ <name>CCDebugInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IEndianMode</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IExtraOptionsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLangConformance</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCSignedPlainChar</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCRequirePrototypes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCDiagWarnAreErr</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCompilerRuntimeInfo</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OutputFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCLibConfigHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>PreInclude</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CompilerMisraOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCIncludePath2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CCStdIncCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCCodeSection</name>
+ <state>.text</state>
+ </option>
+ <option>
+ <name>IProcessorMode2</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCOptLevel</name>
+ <state>3</state>
+ </option>
+ <option>
+ <name>CCOptStrategy</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptLevelSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules98</name>
+ <version>0</version>
+ <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+ </option>
+ <option>
+ <name>CompilerMisraRules04</name>
+ <version>0</version>
+ <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+ </option>
+ <option>
+ <name>CCPosIndRopi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndRwpi</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCPosIndNoDynInit</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccLang</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCDialect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccAllowVLA</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccStaticDestr</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccCppInlineSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IccFloatSemantics</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCOptStrategySlave</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCGuardCalls</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncSource</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CCEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CCEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccExceptions2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IccRTTI2</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>AARM</name>
+ <archiveVersion>2</archiveVersion>
+ <data>
+ <version>10</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>AObjPrefix</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AEndian</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>ACaseSensitivity</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacroChars</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnWhat</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AWarnOne</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange1</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AWarnRange2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ADebug</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AltRegisterNames</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ADefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AList</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AListHeader</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AListing</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>Includes</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacDefs</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MacExps</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>MacExec</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OnlyAssed</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>MultiLine</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLengthCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>PageLength</name>
+ <state>80</state>
+ </option>
+ <option>
+ <name>TabSpacing</name>
+ <state>8</state>
+ </option>
+ <option>
+ <name>AXRef</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDefines</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefInternal</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AXRefDual</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AFpuProcessor</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>AOutputFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>ALimitErrorsCheck</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>ALimitErrorsEdit</name>
+ <state>100</state>
+ </option>
+ <option>
+ <name>AIgnoreStdInclude</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AUserIncludes</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AExtraOptionsCheckV2</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>AExtraOptionsV2</name>
+ <state></state>
+ </option>
+ <option>
+ <name>AsmNoLiteralPool</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>OBJCOPY</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>1</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>OOCOutputFormat</name>
+ <version>3</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OCOutputOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>OOCOutputFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>OOCCommandLineProducer</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>OOCObjCopyEnable</name>
+ <state>0</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>CUSTOM</name>
+ <archiveVersion>3</archiveVersion>
+ <data>
+ <extensions></extensions>
+ <cmdline></cmdline>
+ <hasPrio>0</hasPrio>
+ </data>
+ </settings>
+ <settings>
+ <name>BICOMP</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ <settings>
+ <name>BUILDACTION</name>
+ <archiveVersion>1</archiveVersion>
+ <data>
+ <prebuild></prebuild>
+ <postbuild></postbuild>
+ </data>
+ </settings>
+ <settings>
+ <name>ILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>20</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>IlinkLibIOConfig</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>XLinkMisraHandler</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkInputFileSlave</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOutputFile</name>
+ <state>###Unitialized###</state>
+ </option>
+ <option>
+ <name>IlinkDebugInfoEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkKeepSymbols</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySymbol</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinarySegment</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkRawBinaryAlign</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkConfigDefines</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkMapFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogFile</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogInitialization</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogModule</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogSection</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogVeneer</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile</name>
+ <state>lnk0t.icf</state>
+ </option>
+ <option>
+ <name>IlinkIcfFileSlave</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEnableRemarks</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkSuppressDiags</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsRem</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsWarn</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkTreatAsErr</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkWarningsAreErrors</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkUseExtraOptions</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkExtraOptions</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkLowLevelInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAutoLibEnable</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkAdditionalLibs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkOverrideProgramEntryLabel</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabelSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkProgramEntryLabel</name>
+ <state></state>
+ </option>
+ <option>
+ <name>DoFill</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>FillerByte</name>
+ <state>0xFF</state>
+ </option>
+ <option>
+ <name>FillerStart</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>FillerEnd</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>CrcSize</name>
+ <version>0</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcAlign</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcPoly</name>
+ <state>0x11021</state>
+ </option>
+ <option>
+ <name>CrcCompl</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcBitOrder</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>CrcInitialValue</name>
+ <state>0x0</state>
+ </option>
+ <option>
+ <name>DoCrc</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkBE8Slave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkBufferedTerminalOutput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkStdoutInterfaceSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcFullSize</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIElfToolPostProcess</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogAutoLibSelect</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogRedirSymbols</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkLogUnusedFragments</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcReverseByteOrder</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCrcUseAsInput</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptInline</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsAllow</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptExceptionsForce</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkCmsis</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptMergeDuplSections</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkOptUseVfe</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkOptForceVfe</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackAnalysisEnable</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkStackControlFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkStackCallGraphFile</name>
+ <state></state>
+ </option>
+ <option>
+ <name>CrcAlgorithm</name>
+ <version>1</version>
+ <state>1</state>
+ </option>
+ <option>
+ <name>CrcUnitSize</name>
+ <version>0</version>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkThreadsSlave</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLogCallGraph</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkIcfFile_AltDefault</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IlinkEncInput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutput</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IlinkEncOutputBom</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkHeapSelect</name>
+ <state>1</state>
+ </option>
+ <option>
+ <name>IlinkLocaleSelect</name>
+ <state>1</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>IARCHIVE</name>
+ <archiveVersion>0</archiveVersion>
+ <data>
+ <version>0</version>
+ <wantNonLocal>1</wantNonLocal>
+ <debug>0</debug>
+ <option>
+ <name>IarchiveInputs</name>
+ <state></state>
+ </option>
+ <option>
+ <name>IarchiveOverride</name>
+ <state>0</state>
+ </option>
+ <option>
+ <name>IarchiveOutput</name>
+ <state>###Unitialized###</state>
+ </option>
+ </data>
+ </settings>
+ <settings>
+ <name>BILINK</name>
+ <archiveVersion>0</archiveVersion>
+ <data />
+ </settings>
+ </configuration>
+</project>
diff --git a/bsp/essemi/es32f369x/template.eww b/bsp/essemi/es32f369x/template.eww new file mode 100644 index 0000000000..bd036bb4c9 --- /dev/null +++ b/bsp/essemi/es32f369x/template.eww @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+ <project>
+ <path>$WS_DIR$\template.ewp</path>
+ </project>
+ <batchBuild/>
+</workspace>
+
+
|
