summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--bsp/stm32/stm32f746-st-disco/.config17
-rw-r--r--bsp/stm32/stm32f746-st-disco/README.md11
-rw-r--r--bsp/stm32/stm32f746-st-disco/board/Kconfig2
-rw-r--r--bsp/stm32/stm32f746-st-disco/project.ewp14
-rw-r--r--bsp/stm32/stm32f746-st-disco/project.uvprojx91
-rw-r--r--bsp/stm32/stm32f746-st-disco/rtconfig.h8
6 files changed, 17 insertions, 126 deletions
diff --git a/bsp/stm32/stm32f746-st-disco/.config b/bsp/stm32/stm32f746-st-disco/.config
index a6b5775072..ce3efbd2ea 100644
--- a/bsp/stm32/stm32f746-st-disco/.config
+++ b/bsp/stm32/stm32f746-st-disco/.config
@@ -125,18 +125,7 @@ CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_PM is not set
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
-CONFIG_RT_USING_SPI=y
-CONFIG_RT_USING_QSPI=y
-# CONFIG_RT_USING_SPI_MSD is not set
-CONFIG_RT_USING_SFUD=y
-CONFIG_RT_SFUD_USING_SFDP=y
-CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
-CONFIG_RT_SFUD_USING_QSPI=y
-# CONFIG_RT_DEBUG_SFUD is not set
-# CONFIG_RT_USING_W25QXX is not set
-# CONFIG_RT_USING_GD is not set
-# CONFIG_RT_USING_ENC28J60 is not set
-# CONFIG_RT_USING_SPI_WIFI is not set
+# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set
@@ -317,7 +306,7 @@ CONFIG_SOC_STM32F746NG=y
# Onboard Peripheral Drivers
#
CONFIG_BSP_USING_USB_TO_USART=y
-CONFIG_BSP_USING_QSPI_FLASH=y
+# CONFIG_BSP_USING_QSPI_FLASH is not set
#
# On-chip Peripheral Drivers
@@ -326,7 +315,7 @@ CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set
-CONFIG_BSP_USING_QSPI=y
+# CONFIG_BSP_USING_QSPI is not set
#
# Board extended module Drivers
diff --git a/bsp/stm32/stm32f746-st-disco/README.md b/bsp/stm32/stm32f746-st-disco/README.md
index 65bce68fdd..92b731c29b 100644
--- a/bsp/stm32/stm32f746-st-disco/README.md
+++ b/bsp/stm32/stm32f746-st-disco/README.md
@@ -96,17 +96,14 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，
```bash
\ | /
- RT - Thread Operating System
- / | \ 4.0.0 build Jan 26 2019
+ / | \ 4.0.0 build Jan 30 2019
2006 - 2018 Copyright by rt-thread team
-[D/drv.qspi] qspi init succsee!
-[SFUD] Find a Micron flash chip. Size is 16777216 bytes.
-[SFUD] n25q128 flash device is initialize success.
-[D/drv.qspi] qspi init succsee!
-flash already enter qspi mode
+msh >
```
+
### 进阶使用
-此 BSP 默认开启了 GPIO， 串口1， QSPI和SFUD的功能，更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下：
+此 BSP 默认只开启了 GPIO 和 串口1 的功能，更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下：
1. 在 bsp 下打开 env 工具。
diff --git a/bsp/stm32/stm32f746-st-disco/board/Kconfig b/bsp/stm32/stm32f746-st-disco/board/Kconfig
index a5e6f61905..ee295f7c3a 100644
--- a/bsp/stm32/stm32f746-st-disco/board/Kconfig
+++ b/bsp/stm32/stm32f746-st-disco/board/Kconfig
@@ -12,7 +12,7 @@ menu "Onboard Peripheral Drivers"
select BSP_USING_UART1
default y
config BSP_USING_QSPI_FLASH
- bool "Enable QSPI FLASH (N25Q256 qspi)"
+ bool "Enable QSPI FLASH (N25Q256 qspi1)"
select BSP_USING_QSPI
select RT_USING_SFUD
select RT_SFUD_USING_QSPI
diff --git a/bsp/stm32/stm32f746-st-disco/project.ewp b/bsp/stm32/stm32f746-st-disco/project.ewp
index c25fbcb5e0..7493cb2f34 100644
--- a/bsp/stm32/stm32f746-st-disco/project.ewp
+++ b/bsp/stm32/stm32f746-st-disco/project.ewp
@@ -346,6 +346,7 @@
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7</state>
+ <state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
@@ -1375,6 +1376,7 @@
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7</state>
+ <state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
@@ -2135,21 +2137,21 @@
</file>
</group>
<group>
- <name>CORTEX-M7</name>
+ <name>cpu</name>
<file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\cpuport.c</name>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
</file>
<file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\context_iar.S</name>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
</file>
<file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
</file>
<file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\cpuport.c</name>
</file>
<file>
- <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
+ <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\context_iar.S</name>
</file>
</group>
<group>
diff --git a/bsp/stm32/stm32f746-st-disco/project.uvprojx b/bsp/stm32/stm32f746-st-disco/project.uvprojx
index 436c68585d..8325fc036c 100644
--- a/bsp/stm32/stm32f746-st-disco/project.uvprojx
+++ b/bsp/stm32/stm32f746-st-disco/project.uvprojx
@@ -332,7 +332,7 @@
<MiscControls />
<Define>USE_HAL_DRIVER, STM32F746xx</Define>
<Undefine />
- <IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m7;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\spi;..\..\..\components\drivers\include;..\..\..\components\drivers\spi\sfud\inc;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Inc;..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Include;..\libraries\STM32F7xx_HAL\CMSIS\Include</IncludePath>
+ <IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m7;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Inc;..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Include;..\libraries\STM32F7xx_HAL\CMSIS\Include</IncludePath>
</VariousControls>
</Cads>
<Aads>
@@ -509,13 +509,6 @@
</Files>
<Files>
<File>
- <FileName>drv_qspi_flash.c</FileName>
- <FileType>1</FileType>
- <FilePath>board\ports\drv_qspi_flash.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
<FileName>startup_stm32f746xx.s</FileName>
<FileType>2</FileType>
<FilePath>..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Source\Templates\arm\startup_stm32f746xx.s</FilePath>
@@ -537,20 +530,6 @@
</Files>
<Files>
<File>
- <FileName>drv_spi.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\libraries\HAL_Drivers\drv_spi.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>drv_qspi.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\libraries\HAL_Drivers\drv_qspi.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
@@ -613,48 +592,6 @@
</Files>
<Files>
<File>
- <FileName>spi_core.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\..\..\components\drivers\spi\spi_core.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>spi_dev.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\..\..\components\drivers\spi\spi_dev.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>qspi_core.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\..\..\components\drivers\spi\qspi_core.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>spi_flash_sfud.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\..\..\components\drivers\spi\spi_flash_sfud.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>sfud.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\..\..\components\drivers\spi\sfud\src\sfud.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>sfud_sfdp.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\..\..\components\drivers\spi\sfud\src\sfud_sfdp.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
<FileName>completion.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
@@ -702,18 +639,6 @@
<FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath>
</File>
</Files>
- <GroupOption>
- <GroupArmAds>
- <Cads>
- <VariousControls>
- <MiscControls> --c99</MiscControls>
- <Define> </Define>
- <Undefine> </Undefine>
- <IncludePath> </IncludePath>
- </VariousControls>
- </Cads>
- </GroupArmAds>
- </GroupOption>
</Group>
<Group>
<GroupName>finsh</GroupName>
@@ -888,20 +813,6 @@
<FilePath>..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_usart.c</FilePath>
</File>
</Files>
- <Files>
- <File>
- <FileName>stm32f7xx_hal_spi.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_spi.c</FilePath>
- </File>
- </Files>
- <Files>
- <File>
- <FileName>stm32f7xx_hal_qspi.c</FileName>
- <FileType>1</FileType>
- <FilePath>..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Src\stm32f7xx_hal_qspi.c</FilePath>
- </File>
- </Files>
</Group>
</Groups>
</Target>
diff --git a/bsp/stm32/stm32f746-st-disco/rtconfig.h b/bsp/stm32/stm32f746-st-disco/rtconfig.h
index bc1cea3439..cc7acbac06 100644
--- a/bsp/stm32/stm32f746-st-disco/rtconfig.h
+++ b/bsp/stm32/stm32f746-st-disco/rtconfig.h
@@ -79,12 +79,6 @@
#define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA
#define RT_USING_PIN
-#define RT_USING_SPI
-#define RT_USING_QSPI
-#define RT_USING_SFUD
-#define RT_SFUD_USING_SFDP
-#define RT_SFUD_USING_FLASH_INFO_TABLE
-#define RT_SFUD_USING_QSPI
/* Using WiFi */
@@ -167,14 +161,12 @@
/* Onboard Peripheral Drivers */
#define BSP_USING_USB_TO_USART
-#define BSP_USING_QSPI_FLASH
/* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART
#define BSP_USING_UART1
-#define BSP_USING_QSPI
/* Board extended module Drivers */
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-30 10:43:02 +0000