diff options
30 files changed, 5162 insertions, 0 deletions
diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/.config b/bsp/stm32/stm32wle5-yizhilian-lm401/.config new file mode 100644 index 0000000000..dd8bf01cdb --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/.config @@ -0,0 +1,597 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=100 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set + +# +# kservice optimization +# +# CONFIG_RT_KSERVICE_USING_STDLIB is not set +# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set +# CONFIG_RT_USING_ASM_MEMCPY is not set +# CONFIG_RT_DEBUG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +# CONFIG_RT_USING_MEMHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="lpuart1" +# CONFIG_RT_PRINTF_LONGLONG is not set +CONFIG_RT_VER_NUM=0x40004 +CONFIG_ARCH_ARM=y +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M4=y +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 + +# +# C++ features +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Command shell +# +CONFIG_RT_USING_FINSH=y +CONFIG_RT_USING_MSH=y +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_CMD_SIZE=80 +CONFIG_MSH_USING_BUILT_IN_COMMANDS=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_ARG_MAX=10 + +# +# Device virtual file system +# +# CONFIG_RT_USING_DFS is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_PIPE_BUFSZ=512 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set +# CONFIG_RT_SERIAL_USING_DMA is not set +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +# CONFIG_RT_USING_PHY is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# POSIX layer and C standard library +# +# CONFIG_RT_USING_LIBC is not set +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_LIBC_USING_TIME is not set + +# +# Network +# + +# +# Socket abstraction layer +# +# CONFIG_RT_USING_SAL is not set + +# +# Network interface device +# +# CONFIG_RT_USING_NETDEV is not set + +# +# light weight TCP/IP stack +# +# CONFIG_RT_USING_LWIP is not set + +# +# AT commands +# +# CONFIG_RT_USING_AT is not set + +# +# VBUS(Virtual Software BUS) +# +# CONFIG_RT_USING_VBUS is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_RT_LINK is not set +# CONFIG_RT_USING_LWP is not set + +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PDULIB is not set +# CONFIG_PKG_USING_BTSTACK is not set +# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set +# CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set +# CONFIG_PKG_USING_LORA_PKT_FWD is not set +# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set +# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set +# CONFIG_PKG_USING_HM is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set +# CONFIG_PKG_USING_HELIX is not set +# CONFIG_PKG_USING_AZUREGUIX is not set +# CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set +# CONFIG_PKG_USING_UGUI is not set + +# +# U8G2: a monochrome graphic library +# +# CONFIG_PKG_USING_U8G2_OFFICIAL is not set +# CONFIG_PKG_USING_U8G2 is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ULOG_FILE is not set +# CONFIG_PKG_USING_LOGMGR is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_MEMORYPERF is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set +# CONFIG_PKG_USING_LWRB2RTT is not set +# CONFIG_PKG_USING_CPU_USAGE is not set +# CONFIG_PKG_USING_GBK2UTF8 is not set +# CONFIG_PKG_USING_VCONSOLE is not set +# CONFIG_PKG_USING_KDB is not set +# CONFIG_PKG_USING_WAMR is not set +# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set +# CONFIG_PKG_USING_LWLOG is not set +# CONFIG_PKG_USING_ANV_TRACE is not set +# CONFIG_PKG_USING_ANV_MEMLEAK is not set +# CONFIG_PKG_USING_ANV_TESTSUIT is not set +# CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set + +# +# system packages +# + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set + +# +# Micrium: Micrium software products porting for RT-Thread +# +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set +# CONFIG_PKG_USING_UCOSII_WRAPPER is not set +# CONFIG_PKG_USING_UC_CRC is not set +# CONFIG_PKG_USING_UC_CLK is not set +# CONFIG_PKG_USING_UC_COMMON is not set +# CONFIG_PKG_USING_UC_MODBUS is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_PPOOL is not set +# CONFIG_PKG_USING_OPENAMP is not set +# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set +# CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set +# CONFIG_PKG_USING_WCWIDTH is not set +# CONFIG_PKG_USING_MCUBOOT is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_AS7341 is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set +# CONFIG_PKG_USING_LY68L6400 is not set +# CONFIG_PKG_USING_DM9051 is not set +# CONFIG_PKG_USING_SSD1306 is not set +# CONFIG_PKG_USING_QKEY is not set +# CONFIG_PKG_USING_RS485 is not set +# CONFIG_PKG_USING_NES is not set +# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set +# CONFIG_PKG_USING_VDEVICE is not set +# CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_BLUETRUM_SDK is not set +# CONFIG_PKG_USING_MISAKA_AT24CXX is not set +# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set +# CONFIG_PKG_USING_BL_MCU_SDK is not set + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set + +# +# miscellaneous packages +# + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_LZMA is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_KI is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_LWGPS is not set +# CONFIG_PKG_USING_STATE_MACHINE is not set +# CONFIG_PKG_USING_MCURSES is not set +# CONFIG_PKG_USING_COWSAY is not set +# CONFIG_PKG_USING_TERMBOX is not set +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32WL=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32WLE5CB=y + +# +# Onboard Peripheral Drivers +# +CONFIG_BSP_USING_USB_TO_UART=y + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +# CONFIG_BSP_USING_ONCHIP_RTC is not set +CONFIG_BSP_USING_UART=y +# CONFIG_BSP_USING_UART1 is not set +# CONFIG_BSP_USING_UART2 is not set +CONFIG_BSP_USING_LPUART1=y + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/.gitignore b/bsp/stm32/stm32wle5-yizhilian-lm401/.gitignore new file mode 100644 index 0000000000..7221bde019 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/Kconfig b/bsp/stm32/stm32wle5-yizhilian-lm401/Kconfig new file mode 100644 index 0000000000..8cbc7b71a8 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/Kconfig @@ -0,0 +1,21 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" +source "board/Kconfig" diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/README.md b/bsp/stm32/stm32wle5-yizhilian-lm401/README.md new file mode 100644 index 0000000000..5a8f2a66c9 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/README.md @@ -0,0 +1,107 @@ +# LM401-LoraWan 开发板的 BSP 说明 + +## 简介 + +本文档为易智联（西安）科技有限公司基于STM32WLE5CB SOC 的Lora模块评估板的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +LM401-LoraWAN评估板是易智联（西安）科技有限公司推出的基于STM32WLE5CB的Lora模块评估板。提供了基本的硬件电路，并板载USB转COM以及LDO。 + +开发板外观如下图所示： + + + +该开发板常用 **板载资源** 如下： + +- MCU：STM32WLE5CB，主频 48MHz，128KB FLASH ，48KB RAM（16KB+32KB）。 +- 常用外设: + - LED：power LED(LED4 红色),3个User LED(LED1 蓝色、LED2 黄绿色、LED3 红色) + - 按键：复位按键(B4)，3个 User Button(B1、B2、B3)。 +- 常用接口：USB转串口，可拨码开(S1)关断开。 + +开发板更多详细信息请参考(https://item.taobao.com/item.htm?spm=a1z0d.6639537.1997196601.33.7e207484TKjwGe&id=655801203935)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| 板载 USB 转串口 | 支持 | LPUART1 | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | LED1(PB5)\LED2(PB4)\LED3(PB3) | +| UART | 支持 | LPUART1 | +| **扩展模块** | **支持情况** | **备注** | + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST_LINK 仿真器下载程序，在通过 ST_LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，LED5 常亮、LED1\LED2\LED3 会周期性闪烁。 + +USB 转 COM 端口默认连接LPUART1，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 4.0.4 build Oct 10 2020 + 2006 - 2021 Copyright by rt-thread team +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 LPUART1的功能，如果需使用更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk5` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- 开机时如果不能打印 RT-Thread 版本信息，请重新选择 PC 端串口调试软件的串口号. + +## 联系人信息 + +维护人: + +- [CaocoWang] 邮箱：<[email protected]>
\ No newline at end of file diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/SConscript b/bsp/stm32/stm32wle5-yizhilian-lm401/SConscript new file mode 100644 index 0000000000..c6932b3c6f --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/SConscript @@ -0,0 +1,14 @@ +# RT-Thread scons bridge +import os +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/SConstruct b/bsp/stm32/stm32wle5-yizhilian-lm401/SConstruct new file mode 100644 index 0000000000..77e638a5eb --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/SConstruct @@ -0,0 +1,59 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32WLxx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/applications/SConscript b/bsp/stm32/stm32wle5-yizhilian-lm401/applications/SConscript new file mode 100644 index 0000000000..01eb940dfb --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/applications/SConscript @@ -0,0 +1,11 @@ +Import('RTT_ROOT') +Import('rtconfig') +from building import * + +cwd = os.path.join(str(Dir('#')), 'applications') +src = Glob('*.c') +CPPPATH = [cwd, str(Dir('#'))] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/applications/main.c b/bsp/stm32/stm32wle5-yizhilian-lm401/applications/main.c new file mode 100644 index 0000000000..18ca4a5425 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/applications/main.c @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-10-10 CaocoWang first version + */ + +#include <rtthread.h> +#include <rtdevice.h> +#include <board.h> + +/* LM401_LoraWan Color led */ +#define LED_BLUE_PIN GET_PIN(B,5) /* defined the LED_BLUE pin: PB5 */ +#define LED_GREEN_PIN GET_PIN(B,4) +#define LED_RED_PIN GET_PIN(B,3) + +int main(void) +{ + /* set LED_BLUE pin mode to output */ + rt_pin_mode(LED_BLUE_PIN, PIN_MODE_OUTPUT); + + while (1) + { + rt_pin_write(LED_BLUE_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED_BLUE_PIN, PIN_LOW); + rt_thread_mdelay(500); + } +} diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000..556d1eda25 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/.mxproject @@ -0,0 +1,17 @@ +[PreviousLibFiles] +LibFiles=Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_bus.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_system.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dmamux.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_cortex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_def.h;Drivers/STM32WLxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim_ex.h;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_gpio.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr_ex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_cortex.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_exti.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim.c;Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim_ex.c;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_uart_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_rcc_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_rcc.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_bus.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_system.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_flash_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_gpio_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dma.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_ll_dmamux.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_dma_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_pwr_ex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_cortex.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_def.h;Drivers/STM32WLxx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_exti.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim.h;Drivers/STM32WLxx_HAL_Driver/Inc/stm32wlxx_hal_tim_ex.h;Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wle5xx.h;Drivers/CMSIS/Device/ST/STM32WLxx/Include/stm32wlxx.h;Drivers/CMSIS/Device/ST/STM32WLxx/Include/system_stm32wlxx.h;Drivers/CMSIS/Device/ST/STM32WLxx/Source/Templates/system_stm32wlxx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_armclang_ltm.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv81mml.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm35p.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h; + +[] +SourceFiles=;; + +[PreviousGenFiles] +HeaderPath=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc +HeaderFiles=stm32wlxx_it.h;stm32wlxx_hal_conf.h;main.h; +SourcePath=E:/rt-thread/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src +SourceFiles=stm32wlxx_it.c;stm32wlxx_hal_msp.c;main.c; + +[PreviousUsedKeilFiles] +SourceFiles=..\Src\main.c;..\Src\stm32wlxx_it.c;..\Src\stm32wlxx_hal_msp.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_gpio.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_cortex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_exti.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim_ex.c;..\Drivers/CMSIS/Device/ST/STM32WLxx/Source/Templates/system_stm32wlxx.c;..\\Src/system_stm32wlxx.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_uart_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_rcc_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_flash_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_gpio.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_dma_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_pwr_ex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_cortex.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_exti.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim.c;..\Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_tim_ex.c;..\Drivers/CMSIS/Device/ST/STM32WLxx/Source/Templates/system_stm32wlxx.c;..\\Src/system_stm32wlxx.c;;; +HeaderPath=..\Drivers\STM32WLxx_HAL_Driver\Inc;..\Drivers\STM32WLxx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32WLxx\Include;..\Drivers\CMSIS\Include;..\Inc; +CDefines=CORE_CM4;USE_HAL_DRIVER;STM32WLE5xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 0000000000..7584ae0fd1 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,158 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +GPIO.groupedBy=Group By Peripherals +KeepUserPlacement=false +Mcu.Family=STM32WL +Mcu.IP0=LPUART1 +Mcu.IP1=NVIC +Mcu.IP2=RCC +Mcu.IP3=SYS +Mcu.IP4=USART1 +Mcu.IPNb=5 +Mcu.Name=STM32WLE5CBUx +Mcu.Package=UFQFPN48 +Mcu.Pin0=PB3 +Mcu.Pin1=PB4 +Mcu.Pin10=VP_SYS_VS_Systick +Mcu.Pin2=PB5 +Mcu.Pin3=PA0 +Mcu.Pin4=PA1 +Mcu.Pin5=PA2 +Mcu.Pin6=PA3 +Mcu.Pin7=PA4 +Mcu.Pin8=PA9 +Mcu.Pin9=PA10 +Mcu.PinsNb=11 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32WLE5CBUx +MxCube.Version=6.3.0 +MxDb.Version=DB.6.0.30 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PA0.GPIOParameters=GPIO_Label +PA0.GPIO_Label=BUT1 +PA0.Locked=true +PA0.Signal=GPIO_Input +PA1.GPIOParameters=GPIO_Label +PA1.GPIO_Label=BUT2 +PA1.Locked=true +PA1.Signal=GPIO_Input +PA10.Locked=true +PA10.Mode=Asynchronous +PA10.Signal=USART1_RX +PA2.GPIOParameters=GPIO_PuPd +PA2.GPIO_PuPd=GPIO_PULLUP +PA2.Mode=Asynchronous +PA2.Signal=LPUART1_TX +PA3.GPIOParameters=GPIO_PuPd +PA3.GPIO_PuPd=GPIO_PULLUP +PA3.Mode=Asynchronous +PA3.Signal=LPUART1_RX +PA4.GPIOParameters=GPIO_Label +PA4.GPIO_Label=BUT3 +PA4.Locked=true +PA4.Signal=GPIO_Input +PA9.Locked=true +PA9.Mode=Asynchronous +PA9.Signal=USART1_TX +PB3.GPIOParameters=GPIO_Label +PB3.GPIO_Label=LED3 +PB3.Locked=true +PB3.Signal=GPIO_Output +PB4.GPIOParameters=GPIO_Label +PB4.GPIO_Label=LED2 +PB4.Locked=true +PB4.Signal=GPIO_Output +PB5.GPIOParameters=GPIO_Label +PB5.GPIO_Label=LED1 +PB5.Locked=true +PB5.Signal=GPIO_Output +PCC.SUBGHZ.FrequencyBand=High +PCC.SUBGHZ.Modulation=FSK +PCC.SUBGHZ.OptionalSettings=false +PCC.SUBGHZ.Output.Power=14 +PCC.SUBGHZ.PowerAmplifier=Low Power +PCC.SUBGHZ.RxBoosted=false +PCC.SUBGHZ.SMPS=Off +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32WLE5CBUx +ProjectManager.FirmwarePackage=STM32Cube FW_WL V1.1.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5.32 +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_LPUART1_UART_Init-LPUART1-false-HAL-true +RCC.AHBFreq_Value=48000000 +RCC.APB1Freq_Value=48000000 +RCC.APB1TimFreq_Value=48000000 +RCC.APB2Freq_Value=48000000 +RCC.APB2TimFreq_Value=48000000 +RCC.APB3Freq_Value=48000000 +RCC.CortexFreq_Value=48000000 +RCC.FCLKCortexFreq_Value=48000000 +RCC.FamilyName=M +RCC.HCLK3Freq_Value=48000000 +RCC.HCLKFreq_Value=48000000 +RCC.HSE_VALUE=8000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=48000000 +RCC.I2C2Freq_Value=48000000 +RCC.I2C3Freq_Value=48000000 +RCC.I2S2Freq_Value=16000000 +RCC.IPParameters=AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,CortexFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLK3Freq_Value,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2S2Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM3Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,MCO1PinFreq_Value,MSIClockRange,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,RNGFreq_Value,SYSCLKFreq_VALUE,USART1CLockSelection,USART1Freq_Value,USART2CLockSelection,USART2Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value +RCC.LPTIM1Freq_Value=48000000 +RCC.LPTIM2Freq_Value=48000000 +RCC.LPTIM3Freq_Value=48000000 +RCC.LPUART1Freq_Value=48000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSE_VALUE=32768 +RCC.MCO1PinFreq_Value=48000000 +RCC.MSIClockRange=RCC_MSIRANGE_11 +RCC.PLLPoutputFreq_Value=192000000 +RCC.PLLQoutputFreq_Value=192000000 +RCC.PLLRCLKFreq_Value=192000000 +RCC.PWRFreq_Value=48000000 +RCC.RNGFreq_Value=32000 +RCC.SYSCLKFreq_VALUE=48000000 +RCC.USART1CLockSelection=RCC_USART1CLKSOURCE_SYSCLK +RCC.USART1Freq_Value=48000000 +RCC.USART2CLockSelection=RCC_USART2CLKSOURCE_SYSCLK +RCC.USART2Freq_Value=48000000 +RCC.VCOInputFreq_Value=48000000 +RCC.VCOOutputFreq_Value=384000000 +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/main.h new file mode 100644 index 0000000000..40b5ad98b9 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,88 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2021 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wlxx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +#include "stm32wlxx_hal.h" +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ +/** +* @brief This function is executed in case of error occurrence. +* @param None +* @retval None +*/ +void Error_Handler(void); +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define LED3_Pin GPIO_PIN_3 +#define LED3_GPIO_Port GPIOB +#define LED2_Pin GPIO_PIN_4 +#define LED2_GPIO_Port GPIOB +#define LED1_Pin GPIO_PIN_5 +#define LED1_GPIO_Port GPIOB +#define BUT1_Pin GPIO_PIN_0 +#define BUT1_GPIO_Port GPIOA +#define BUT2_Pin GPIO_PIN_1 +#define BUT2_GPIO_Port GPIOA +#define BUT3_Pin GPIO_PIN_4 +#define BUT3_GPIO_Port GPIOA +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_hal_conf.h b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_hal_conf.h new file mode 100644 index 0000000000..031ed1da20 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_hal_conf.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32wlxx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WLxx_HAL_CONF_H +#define STM32WLxx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_GTZC_MODULE_ENABLED */ +/*#define HAL_HSEM_MODULE_ENABLED */ +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IPCC_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SUBGHZ_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +#define HAL_EXTI_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PKA_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_SUBGHZ_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ + +#if !defined (HSE_VALUE) +#define HSE_VALUE 32000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) +#define MSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief Internal Multiple Speed oscillator (HSI48) default value. + * This value is the default HSI48 range value after Reset. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI48_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1uL <<__NVIC_PRIO_BITS) - 1uL) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 0U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32wlxx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32wlxx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32wlxx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32wlxx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32wlxx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32wlxx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32wlxx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32wlxx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32wlxx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32wlxx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_GTZC_MODULE_ENABLED + #include "stm32wlxx_hal_gtzc.h" +#endif /* HAL_GTZC_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32wlxx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32wlxx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32wlxx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IPCC_MODULE_ENABLED + #include "stm32wlxx_hal_ipcc.h" +#endif /* HAL_IPCC_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32wlxx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32wlxx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32wlxx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32wlxx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32wlxx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32wlxx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32wlxx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32wlxx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32wlxx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32wlxx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32wlxx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SUBGHZ_MODULE_ENABLED + #include "stm32wlxx_hal_subghz.h" +#endif /* HAL_SUBGHZ_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32wlxx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32wlxx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32wlxx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32wlxx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WLxx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_it.h b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_it.h new file mode 100644 index 0000000000..7e9d011250 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_it.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wlxx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2021 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WLxx_IT_H +#define __STM32WLxx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WLxx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_nucleo.h b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_nucleo.h new file mode 100644 index 0000000000..07da513450 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Inc/stm32wlxx_nucleo.h @@ -0,0 +1,357 @@ +/** + ****************************************************************************** + * @file stm32wlxx_nucleo.h + * @author MCD Application Team + * @brief Header for stm32wlxx_nucleo.c + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WLXX_NUCLEO_H +#define STM32WLXX_NUCLEO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wlxx_nucleo_errno.h" +#include "stm32wlxx_nucleo_conf.h" + +#if (USE_BSP_COM_FEATURE > 0) + #if (USE_COM_LOG > 0) + #ifndef __GNUC__ + #include "stdio.h" + #endif + #endif +#endif + +/** @addtogroup BSP + * @{ + */ + +/** @defgroup STM32WLXX_NUCLEO STM32WLXX-NUCLEO + * @{ + */ + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL LOW LEVEL + * @{ + */ + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types + * @{ + */ +typedef enum +{ + LED1 = 0, + LED2 = 1, + LED3 = 2, + /* Color led aliases */ + LED_BLUE = LED1, + LED_GREEN = LED2, + LED_RED = LED3 +}Led_TypeDef; + +typedef enum +{ + BUTTON_SW1 = 0, + BUTTON_SW2 = 1, + BUTTON_SW3 = 2, +}Button_TypeDef; + +typedef enum +{ + BUTTON_MODE_GPIO = 0, + BUTTON_MODE_EXTI = 1 +}ButtonMode_TypeDef; + +#if (USE_BSP_COM_FEATURE > 0) +typedef enum +{ + COM1 = 0U, + COMn +}COM_TypeDef; + +typedef enum +{ + COM_STOPBITS_1 = UART_STOPBITS_1, + COM_STOPBITS_2 = UART_STOPBITS_2, +}COM_StopBitsTypeDef; + +typedef enum +{ + COM_PARITY_NONE = UART_PARITY_NONE, + COM_PARITY_EVEN = UART_PARITY_EVEN, + COM_PARITY_ODD = UART_PARITY_ODD, +}COM_ParityTypeDef; + +typedef enum +{ + COM_HWCONTROL_NONE = UART_HWCONTROL_NONE, + COM_HWCONTROL_RTS = UART_HWCONTROL_RTS, + COM_HWCONTROL_CTS = UART_HWCONTROL_CTS, + COM_HWCONTROL_RTS_CTS = UART_HWCONTROL_RTS_CTS, +}COM_HwFlowCtlTypeDef; + +typedef enum +{ + COM_WORDLENGTH_7B = UART_WORDLENGTH_7B, + COM_WORDLENGTH_8B = UART_WORDLENGTH_8B, + COM_WORDLENGTH_9B = UART_WORDLENGTH_9B, +}COM_WordLengthTypeDef; + +typedef struct +{ + uint32_t BaudRate; + COM_WordLengthTypeDef WordLength; + COM_StopBitsTypeDef StopBits; + COM_ParityTypeDef Parity; + COM_HwFlowCtlTypeDef HwFlowCtl; +}COM_InitTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +typedef struct +{ + pUART_CallbackTypeDef pMspInitCb; + pUART_CallbackTypeDef pMspDeInitCb; +}BSP_COM_Cb_t; +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 1) */ +#endif /* (USE_BSP_COM_FEATURE > 0) */ + +typedef enum +{ + ABSENT = 0, + PRESENT = 1, +}Presence_TypeDef; +/** + * @} + */ + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants + * @{ + */ + +/** + * @brief STM32WLXX NUCLEO BSP Driver version number + */ +#define __STM32WLXX_NUCLEO_BSP_VERSION_MAIN (0x00U) /*!< [31:24] main version */ +#define __STM32WLXX_NUCLEO_BSP_VERSION_SUB1 (0x03U) /*!< [23:16] sub1 version */ +#define __STM32WLXX_NUCLEO_BSP_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32WLXX_NUCLEO_BSP_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32WLXX_NUCLEO_BSP_VERSION ((__STM32WLXX_NUCLEO_BSP_VERSION_MAIN << 24)\ + |(__STM32WLXX_NUCLEO_BSP_VERSION_SUB1 << 16)\ + |(__STM32WLXX_NUCLEO_BSP_VERSION_SUB2 << 8 )\ + |(__STM32WLXX_NUCLEO_BSP_VERSION_RC)) + +/** + * @brief Define for STM32WLXX_NUCLEO board + */ +#if !defined (USE_STM32WLXX_NUCLEO) + #define USE_STM32WLXX_NUCLEO +#endif + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_LED LOW LEVEL LED Constants + * @{ + */ +#define LEDn 3 + +#define LED1_PIN GPIO_PIN_15 +#define LED1_GPIO_PORT GPIOB +#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define LED2_PIN GPIO_PIN_9 +#define LED2_GPIO_PORT GPIOB +#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define LED3_PIN GPIO_PIN_11 +#define LED3_GPIO_PORT GPIOB +#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define LEDx_GPIO_CLK_ENABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_ENABLE() /* All Led on same port */ +#define LEDx_GPIO_CLK_DISABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_ENABLE() /* All Led on same port */ +/** + * @} + */ + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_BUTTON LOW LEVEL BUTTON Constants + * @{ + */ +#define BUTTONn 3 + +/** + * @brief Key push-buttons + */ +#define BUTTON_SW1_PIN GPIO_PIN_0 +#define BUTTON_SW1_GPIO_PORT GPIOA +#define BUTTON_SW1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define BUTTON_SW1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define BUTTON_SW1_EXTI_LINE EXTI_LINE_0 +#ifdef CORE_CM0PLUS +#define BUTTON_SW1_EXTI_IRQn EXTI1_0_IRQn +#else +#define BUTTON_SW1_EXTI_IRQn EXTI0_IRQn +#endif + +#define BUTTON_SW2_PIN GPIO_PIN_1 +#define BUTTON_SW2_GPIO_PORT GPIOA +#define BUTTON_SW2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define BUTTON_SW2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define BUTTON_SW2_EXTI_LINE EXTI_LINE_1 +#ifdef CORE_CM0PLUS +#define BUTTON_SW2_EXTI_IRQn EXTI1_0_IRQn +#else +#define BUTTON_SW2_EXTI_IRQn EXTI1_IRQn +#endif + +#define BUTTON_SW3_PIN GPIO_PIN_6 +#define BUTTON_SW3_GPIO_PORT GPIOC +#define BUTTON_SW3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define BUTTON_SW3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() +#define BUTTON_SW3_EXTI_LINE EXTI_LINE_6 +#ifdef CORE_CM0PLUS +#define BUTTON_SW3_EXTI_IRQn EXTI15_4_IRQn +#else +#define BUTTON_SW3_EXTI_IRQn EXTI9_5_IRQn +#endif + +#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if ((__INDEX__) == BUTTON_SW1) BUTTON_SW1_GPIO_CLK_ENABLE(); else \ + if ((__INDEX__) == BUTTON_SW2) BUTTON_SW2_GPIO_CLK_ENABLE(); else \ + if ((__INDEX__) == BUTTON_SW3) BUTTON_SW3_GPIO_CLK_ENABLE();} while(0) + +#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do { if ((__INDEX__) == BUTTON_SW1) BUTTON_SW1_GPIO_CLK_DISABLE(); else \ + if ((__INDEX__) == BUTTON_SW2) BUTTON_SW2_GPIO_CLK_DISABLE(); else \ + if ((__INDEX__) == BUTTON_SW3) BUTTON_SW3_GPIO_CLK_DISABLE();} while(0) + +/** + * @} + */ + +#if (USE_BSP_COM_FEATURE > 0) +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_COM LOW LEVEL COM Port Constants + * @{ + */ +#define COM1_UART LPUART1 +#define COM1_CLK_ENABLE() __HAL_RCC_LPUART1_CLK_ENABLE() +#define COM1_CLK_DISABLE() __HAL_RCC_LPUART1_CLK_DISABLE() + +#define COM1_TX_PIN GPIO_PIN_2 +#define COM1_TX_GPIO_PORT GPIOA +#define COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define COM1_TX_AF GPIO_AF8_LPUART1 + +#define COM1_RX_PIN GPIO_PIN_3 +#define COM1_RX_GPIO_PORT GPIOA +#define COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() +#define COM1_RX_AF GPIO_AF8_LPUART1 +#define COM_POLL_TIMEOUT 1000 + +#define MX_UART_InitTypeDef COM_InitTypeDef +/** + * @} + */ +#endif /* (USE_BSP_COM_FEATURE > 0)*/ + +/** + * @} + */ + +/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Variables + * @{ + */ +extern EXTI_HandleTypeDef hpb_exti[]; +#if (USE_BSP_COM_FEATURE > 0) +extern UART_HandleTypeDef hcom_uart[]; +#endif /* (USE_BSP_COM_FEATURE > 0) */ +/** + * @} + */ + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions + * @{ + */ +uint32_t BSP_GetVersion(void); + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_LED_Functions LOW LEVEL LED Functions + * @{ + */ +int32_t BSP_LED_Init(Led_TypeDef Led); +int32_t BSP_LED_DeInit(Led_TypeDef Led); +int32_t BSP_LED_On(Led_TypeDef Led); +int32_t BSP_LED_Off(Led_TypeDef Led); +int32_t BSP_LED_Toggle(Led_TypeDef Led); +int32_t BSP_LED_GetState(Led_TypeDef Led); +/** + * @} + */ + +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_BUTTON_Functions LOW LEVEL BUTTON Functions + * @{ + */ +int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode); +int32_t BSP_PB_DeInit(Button_TypeDef Button); +int32_t BSP_PB_GetState(Button_TypeDef Button); +void BSP_PB_Callback(Button_TypeDef Button); +void BSP_PB_IRQHandler(Button_TypeDef Button); +/** + * @} + */ + +#if (USE_BSP_COM_FEATURE > 0) +/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_COM_Functions LOW LEVEL COM Port Functions + * @{ + */ +int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init); +int32_t BSP_COM_DeInit(COM_TypeDef COM); +#if (USE_COM_LOG > 0) +int32_t BSP_COM_SelectLogPort (COM_TypeDef COM); +#endif +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM); +int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM , BSP_COM_Cb_t *Callback); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef MX_LPUART1_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init); +/** + * @} + */ +#endif /* (USE_BSP_COM_FEATURE > 0) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WLXX_NUCLEO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/main.c new file mode 100644 index 0000000000..4fe0d6480c --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/main.c @@ -0,0 +1,320 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2021 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +#include "main.h" +#include "stm32wlxx_hal.h" +#include "app_lorawan.h" + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +UART_HandleTypeDef hlpuart1; +UART_HandleTypeDef huart1; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_USART1_UART_Init(void); +static void MX_LPUART1_UART_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART1_UART_Init(); + MX_LPUART1_UART_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + MX_LoRaWAN_Process(); + } + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; + RCC_OscInitStruct.MSIState = RCC_MSI_ON; + RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; + RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3|RCC_CLOCKTYPE_HCLK + |RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1 + |RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief LPUART1 Initialization Function + * @param None + * @retval None + */ +static void MX_LPUART1_UART_Init(void) +{ + + /* USER CODE BEGIN LPUART1_Init 0 */ + + /* USER CODE END LPUART1_Init 0 */ + + /* USER CODE BEGIN LPUART1_Init 1 */ + + /* USER CODE END LPUART1_Init 1 */ + hlpuart1.Instance = LPUART1; + hlpuart1.Init.BaudRate = 209700; + hlpuart1.Init.WordLength = UART_WORDLENGTH_8B; + hlpuart1.Init.StopBits = UART_STOPBITS_1; + hlpuart1.Init.Parity = UART_PARITY_NONE; + hlpuart1.Init.Mode = UART_MODE_TX_RX; + hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + hlpuart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + hlpuart1.FifoMode = UART_FIFOMODE_DISABLE; + if (HAL_UART_Init(&hlpuart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&hlpuart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&hlpuart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&hlpuart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN LPUART1_Init 2 */ + + /* USER CODE END LPUART1_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, LED3_Pin|LED2_Pin|LED1_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pins : LED3_Pin LED2_Pin LED1_Pin */ + GPIO_InitStruct.Pin = LED3_Pin|LED2_Pin|LED1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /*Configure GPIO pins : BUT1_Pin BUT2_Pin BUT3_Pin */ + GPIO_InitStruct.Pin = BUT1_Pin|BUT2_Pin|BUT3_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + { + } + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c new file mode 100644 index 0000000000..42af8858b8 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/stm32wlxx_hal_msp.c @@ -0,0 +1,204 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wlxx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2021 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ +#include "drv_common.h" +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(huart->Instance==LPUART1) + { + /* USER CODE BEGIN LPUART1_MspInit 0 */ + + /* USER CODE END LPUART1_MspInit 0 */ + /** Initializes the peripherals clocks + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1; + PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_LPUART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**LPUART1 GPIO Configuration + PA2 ------> LPUART1_TX + PA3 ------> LPUART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN LPUART1_MspInit 1 */ + + /* USER CODE END LPUART1_MspInit 1 */ + } + else if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + + /** Initializes the peripherals clocks + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_SYSCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF7_USART1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==LPUART1) + { + /* USER CODE BEGIN LPUART1_MspDeInit 0 */ + + /* USER CODE END LPUART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_LPUART1_CLK_DISABLE(); + + /**LPUART1 GPIO Configuration + PA2 ------> LPUART1_TX + PA3 ------> LPUART1_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); + + /* USER CODE BEGIN LPUART1_MspDeInit 1 */ + + /* USER CODE END LPUART1_MspDeInit 1 */ + } + else if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PA9 ------> USART1_TX + PA10 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/stm32wlxx_it.c b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/stm32wlxx_it.c new file mode 100644 index 0000000000..a414d92393 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/stm32wlxx_it.c @@ -0,0 +1,205 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32wlxx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2021 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32wlxx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32WLxx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32wlxx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/system_stm32wlxx.c b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/system_stm32wlxx.c new file mode 100644 index 0000000000..3ce5556be9 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/CubeMX_Config/Src/system_stm32wlxx.c @@ -0,0 +1,359 @@ +/** + ****************************************************************************** + * @file system_stm32wlxx.c + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer System Source File + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2020(-2021) STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32wlxx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the MSI (4 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32wlxx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | MSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 8 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * PLLSAI1_P | NA + *----------------------------------------------------------------------------- + * PLLSAI1_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI1_R | NA + *----------------------------------------------------------------------------- + * Require 48MHz for USB OTG FS, | Disabled + * SDIO and RNG clock | + *----------------------------------------------------------------------------- + *============================================================================= + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32WLxx_system + * @{ + */ + +/** @addtogroup stm32WLxx_System_Private_Includes + * @{ + */ + +#include "stm32wlxx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (MSI_VALUE) + #define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/ +#endif /* LSI_VALUE */ + +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Defines + * @{ + */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate CPU1 CM4 and/or CPU2 + CM0+ vector table anywhere in Sram or Flash. Else vector table will be kept + at address 0x00 which correspond to automatic remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ +#if defined(USER_VECT_TAB_ADDRESS) +#ifdef CORE_CM0PLUS + /*!< Uncomment this line for user vector table remap in Sram else user remap + will be done in Flash. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM2_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#define VECT_TAB_OFFSET 0x00008000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#define VECT_TAB_OFFSET 0x00020000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#endif +#else /* CORE_CM4 */ + /*!< Uncomment this line for user vector table remap in Sram else user remap + will be done in Flash. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#endif +#endif +#endif + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) from within HAL_Init() + 2) by calling CMSIS function SystemCoreClockUpdate() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + */ + uint32_t SystemCoreClock = 4000000UL; /*CPU1: M4 on MSI clock after startup (4MHz)*/ + + const uint32_t AHBPrescTable[16UL] = {1UL, 3UL, 5UL, 1UL, 1UL, 6UL, 10UL, 32UL, 2UL, 4UL, 8UL, 16UL, 64UL, 128UL, 256UL, 512UL}; + + const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL}; + + const uint32_t MSIRangeTable[16UL] = {100000UL, 200000UL, 400000UL, 800000UL, 1000000UL, 2000000UL, \ + 4000000UL, 8000000UL, 16000000UL, 24000000UL, 32000000UL, 48000000UL, 0UL, 0UL, 0UL, 0UL}; /* 0UL values are incorrect cases */ +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + +/** @addtogroup STM32WLxx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ +void SystemInit(void) +{ +#if defined(USER_VECT_TAB_ADDRESS) + /* Configure the Vector Table location add offset address ------------------*/ + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; +#endif + + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10UL*2UL))|(3UL << (11UL*2UL))); /* set CP10 and CP11 Full Access */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) MSI_VALUE is a constant defined in stm32wlxx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSI_VALUE is a constant defined in stm32wlxx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32wlxx_hal_conf.h file (default value + * 32 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp, msirange, pllvco, pllr, pllsource , pllm; + + /* Get MSI Range frequency--------------------------------------------------*/ + + /* Get MSI Range frequency--------------------------------------------------*/ + if((RCC->CR & RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + + /*SystemCoreClock=HAL_RCC_GetSysClockFreq();*/ + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* MSI used as system clock source */ + SystemCoreClock = msirange; + break; + + case 0x04: /* HSI used as system clock source */ + /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL ; + + switch (pllsource) + { + case 0x02: /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm); + break; + + case 0x03: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm); + break; + + default: /* MSI used as PLL clock source */ + pllvco = (msirange / pllm); + break; + } + + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL); + + SystemCoreClock = pllvco/pllr; + break; + + default: + SystemCoreClock = msirange; + break; + } + + /* Compute HCLK clock frequency --------------------------------------------*/ +#if defined(DUAL_CORE) && defined(CORE_CM0PLUS) + /* Get HCLK2 prescaler */ + tmp = AHBPrescTable[((RCC->EXTCFGR & RCC_EXTCFGR_C2HPRE) >> RCC_EXTCFGR_C2HPRE_Pos)]; +#else + /* Get HCLK1 prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)]; +#endif + + /* Core clock frequency */ + SystemCoreClock = SystemCoreClock / tmp; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/Kconfig b/bsp/stm32/stm32wle5-yizhilian-lm401/board/Kconfig new file mode 100644 index 0000000000..52bafc099c --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/Kconfig @@ -0,0 +1,70 @@ +menu "Hardware Drivers Config" + +config SOC_STM32WLE5CB + bool + select SOC_SERIES_STM32WL + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +menu "Onboard Peripheral Drivers" + + config BSP_USING_USB_TO_UART + bool "Enable USB TO UART (lpuart1)" + select BSP_USING_UART + select BSP_USING_LPUART1 + default y + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + config BSP_USING_ONCHIP_RTC + bool "Enable RTC" + default n + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default n + + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART2 + bool "Enable UART2" + default n + + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_LPUART1 + bool "Enable LPUART1" + default y + config BSP_LPUART1_RX_USING_DMA + bool "Enable LPUART1 RX DMA" + depends on BSP_USING_LPUART1 && RT_SERIAL_USING_DMA + default n + + endif + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/SConscript b/bsp/stm32/stm32wle5-yizhilian-lm401/board/SConscript new file mode 100644 index 0000000000..a84e1c8a7d --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/SConscript @@ -0,0 +1,31 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32wlxx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] +path += [cwd + '/ports'] + +startup_path_prefix = SDK_LIB + +if rtconfig.CROSS_TOOL == 'gcc': + src += [startup_path_prefix + '/STM32WLxx_HAL/CMSIS/Device/ST/STM32WLxx/Source/Templates/gcc/startup_stm32wle5xx.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [startup_path_prefix + '/STM32WLxx_HAL/CMSIS/Device/ST/STM32WLxx/Source/Templates/arm/startup_stm32wle5xx.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [startup_path_prefix + '/STM32WLxx_HAL/CMSIS/Device/ST/STM32WLxx/Source/Templates/iar/startup_stm32wle5xx.s'] + +CPPDEFINES = ['STM32WLxx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/board.c b/bsp/stm32/stm32wle5-yizhilian-lm401/board/board.c new file mode 100644 index 0000000000..4d631be83e --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/board.c @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-10-10 CaocoWang first version + */ + +#include <board.h> + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.LSEState = RCC_LSE_OFF; + RCC_OscInitStruct.HSICalibrationValue = 70; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV2; + RCC_OscInitStruct.PLL.PLLN = 30; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV5; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV5; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV5; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers + */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_HCLK3); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/board.h b/bsp/stm32/stm32wle5-yizhilian-lm401/board/board.h new file mode 100644 index 0000000000..8e861c0067 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/board.h @@ -0,0 +1,46 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-10-10 CaoCoWang first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include <rtthread.h> +#include <stm32wlxx.h> +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (128 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM1_SIZE (16) +#define STM32_SRAM1_START (0x20000000) +#define STM32_SRAM1_END (STM32_SRAM1_START + STM32_SRAM1_SIZE * 1024) + +#define STM32_SRAM2_SIZE (32) +#define STM32_SRAM2_START (0x20008000) +#define STM32_SRAM2_END (STM32_SRAM2_START + STM32_SRAM2_SIZE * 1024) + +#define HEAP_BEGIN STM32_SRAM1_START +#define HEAP_END STM32_SRAM1_END + +void SystemClock_Config(void); + + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/board/linker_scripts/link.sct b/bsp/stm32/stm32wle5-yizhilian-lm401/board/linker_scripts/link.sct new file mode 100644 index 0000000000..ff7e3c0efa --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x20000 { ; load region size_region
+ ER_IROM1 0x08000000 0x20000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM2 0x10000000 0x00004000 { ; RW data
+ .ANY (+RW +ZI)
+ }
+}
+
diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/figures/LM401_lora.jpg b/bsp/stm32/stm32wle5-yizhilian-lm401/figures/LM401_lora.jpg Binary files differnew file mode 100644 index 0000000000..ad2e8277c5 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/figures/LM401_lora.jpg diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx new file mode 100644 index 0000000000..1fbdc86a88 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvoptx @@ -0,0 +1,190 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Extensions> + <cExt>*.c</cExt> + <aExt>*.s*; *.src; *.a*</aExt> + <oExt>*.obj; *.o</oExt> + <lExt>*.lib</lExt> + <tExt>*.txt; *.h; *.inc</tExt> + <pExt>*.plm</pExt> + <CppX>*.cpp</CppX> + <nMigrate>0</nMigrate> + </Extensions> + + <DaveTm> + <dwLowDateTime>0</dwLowDateTime> + <dwHighDateTime>0</dwHighDateTime> + </DaveTm> + + <Target> + <TargetName>rt-thread</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <CLKADS>12000000</CLKADS> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + <RunAbUc>0</RunAbUc> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>0</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\build\keil\List\</ListingPath> + </OPTLEX> + <ListingPage> + <CreateCListing>1</CreateCListing> + <CreateAListing>1</CreateAListing> + <CreateLListing>1</CreateLListing> + <CreateIListing>0</CreateIListing> + <AsmCond>1</AsmCond> + <AsmSymb>1</AsmSymb> + <AsmXref>0</AsmXref> + <CCond>1</CCond> + <CCode>0</CCode> + <CListInc>0</CListInc> + <CSymb>0</CSymb> + <LinkerCodeListing>0</LinkerCodeListing> + </ListingPage> + <OPTXL> + <LMap>1</LMap> + <LComments>1</LComments> + <LGenerateSymbols>1</LGenerateSymbols> + <LLibSym>1</LLibSym> + <LLines>1</LLines> + <LLocSym>1</LLocSym> + <LPubSym>1</LPubSym> + <LXref>0</LXref> + <LExpSel>0</LExpSel> + </OPTXL> + <OPTFL> + <tvExp>1</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> + <CpuCode>18</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>1</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <bEvRecOn>1</bEvRecOn> + <bSchkAxf>0</bSchkAxf> + <bTchkAxf>0</bTchkAxf> + <nTsel>6</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>ST-LINKIII-KEIL_SWO</Key> + <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32WLExx_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32WLxx_CM4 -FL020000 -FS08000000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U59300616 -O47 -S8 -ZTIFSpeedSel50000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32WLExx_128.FLM -FS08000000 -FL0020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + <bLintAuto>0</bLintAuto> + <bAutoGenD>0</bAutoGenD> + <LntExFlags>0</LntExFlags> + <pMisraName></pMisraName> + <pszMrule></pszMrule> + <pSingCmds></pSingCmds> + <pMultCmds></pMultCmds> + <pMisraNamep></pMisraNamep> + <pszMrulep></pszMrulep> + <pSingCmdsp></pSingCmdsp> + <pMultCmdsp></pMultCmdsp> + </TargetOption> + </Target> + + <Group> + <GroupName>Source Group 1</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <RteFlg>0</RteFlg> + </Group> + +</ProjectOpt> diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx new file mode 100644 index 0000000000..dc77fb4c6c --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/project.uvprojx @@ -0,0 +1,814 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + <SchemaVersion>2.1</SchemaVersion> + <Header>### uVision Project, (C) Keil Software</Header> + <Targets> + <Target> + <TargetName>rt-thread</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed> + <uAC6>0</uAC6> + <TargetOption> + <TargetCommonOption> + <Device>STM32WLE5CBUx</Device> + <Vendor>STMicroelectronics</Vendor> + <PackID>Keil.STM32WLxx_DFP.1.0.7</PackID> + <PackURL>http://www.keil.com/pack</PackURL> + <Cpu>IRAM(0x20000000,0x4000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu> + <FlashUtilSpec /> + <StartupFile /> + <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM))</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:STM32WLE5CBUx$Drivers\Device\ST\STM32WLxx\Include\stm32wlxx.h</RegisterFile> + <MemoryEnv /> + <Cmp /> + <Asm /> + <Linker /> + <OHString /> + <InfinionOptionDll /> + <SLE66CMisc /> + <SLE66AMisc /> + <SLE66LinkerMisc /> + <SFDFile>$$Device:STM32WLE5CBUx$CMSIS\SVD\STM32WLE5_CM4.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath /> + <IncludePath /> + <LibPath /> + <RegisterFilePath /> + <DBRegisterFilePath /> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\build\keil\Obj\</OutputDirectory> + <OutputName>rt-thread</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>0</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\build\keil\List\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name /> + <UserProg2Name /> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name /> + <UserProg2Name /> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>1</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name> + <UserProg2Name /> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString /> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument /> + <IncludeLibraryModules /> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName>SARMCM3.DLL</SimDllName> + <SimDllArguments> -REMAP -MPU</SimDllArguments> + <SimDlgDll>DCM.DLL</SimDlgDll> + <SimDlgDllArguments>-pCM4</SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments> -MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4096</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>BIN\UL2CM3.DLL</Flash2> + <Flash3>"" ()</Flash3> + <Flash4 /> + <pFcarmOut /> + <pFcarmGrp /> + <pFcArmRoot /> + <FcArmLst>0</FcArmLst> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName /> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>0</RvdsVP> + <RvdsMve>0</RvdsMve> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>0</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x4000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x8000000</StartAddress> + <Size>0x20000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x8000000</StartAddress> + <Size>0x20000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x4000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector /> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>1</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <uGnu>0</uGnu> + <useXO>0</useXO> + <v6Lang>1</v6Lang> + <v6LangP>1</v6LangP> + <vShortEn>1</vShortEn> + <vShortWch>1</vShortWch> + <v6Lto>0</v6Lto> + <v6WtE>0</v6WtE> + <v6Rtti>0</v6Rtti> + <VariousControls> + <MiscControls /> + <Define>USE_HAL_DRIVER, STM32WLxx, __RTTHREAD__, __CLK_TCK=RT_TICK_PER_SECOND</Define> + <Undefine /> + <IncludePath>applications;.;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\nogcc;..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Inc;..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\stm32lwxx\Include;..\libraries\STM32WLxx_HAL\CMSIS\Include;..\..\..\examples\utest\testcases\kernel</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <uClangAs>0</uClangAs> + <VariousControls> + <MiscControls /> + <Define /> + <Undefine /> + <IncludePath /> + </VariousControls> + </Aads> + <LDads> + <umfTarg>0</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x08000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase /> + <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile> + <IncludeLibs /> + <IncludeLibsPath /> + <Misc /> + <LinkerInputFile /> + <DisabledWarnings /> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> + <Group> + <GroupName>Applications</GroupName> + <Files> + <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>applications\main.c</FilePath> + </File> + </Files> + </Group> + <Group> + <GroupName>CPU</GroupName> + <Files> + <File> + <FileName>backtrace.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>showmem.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>div0.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>cpuport.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>context_rvds.S</FileName> + <FileType>2</FileType> + <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath> + </File> + </Files> + </Group> + <Group> + <GroupName>DeviceDrivers</GroupName> + <Files> + <File> + <FileName>pin.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>completion.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\completion.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>ringblk_buf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>workqueue.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\workqueue.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>dataqueue.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>pipe.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>ringbuffer.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>waitqueue.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath> + </File> + </Files> + </Group> + <Group> + <GroupName>Drivers</GroupName> + <Files> + <File> + <FileName>stm32wlxx_hal_msp.c</FileName> + <FileType>1</FileType> + <FilePath>board\CubeMX_Config\Src\stm32wlxx_hal_msp.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>startup_stm32wle5xx.s</FileName> + <FileType>2</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\arm\startup_stm32wle5xx.s</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>board.c</FileName> + <FileType>1</FileType> + <FilePath>board\board.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>drv_gpio.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>drv_usart.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>drv_common.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath> + </File> + </Files> + </Group> + <Group> + <GroupName>Finsh</GroupName> + <Files> + <File> + <FileName>shell.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\finsh\shell.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>msh.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\finsh\msh.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>cmd.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\components\finsh\cmd.c</FilePath> + </File> + </Files> + </Group> + <Group> + <GroupName>Kernel</GroupName> + <Files> + <File> + <FileName>mempool.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\mempool.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>device.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\device.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>mem.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\mem.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>idle.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\idle.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>timer.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\timer.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\clock.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>kservice.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\kservice.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>components.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\components.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>thread.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\thread.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>ipc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\ipc.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>scheduler.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\scheduler.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>irq.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\irq.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>object.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\src\object.c</FilePath> + </File> + </Files> + </Group> + <Group> + <GroupName>STM32_HAL</GroupName> + <Files> + <File> + <FileName>stm32wlxx_hal_pwr.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_dma_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_gpio.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_gpio.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_rcc_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_usart.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_pwr_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_pwr_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_cryp.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_usart_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_usart_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_exti.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_exti.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>system_stm32wlxx.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\CMSIS\Device\ST\STM32WLxx\Source\Templates\system_stm32wlxx.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_cortex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cortex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_uart_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_rcc.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rcc.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_dma.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_dma.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_uart.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_comp.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_comp.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_rng.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_rng.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_crc.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_crc_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_crc_ex.c</FilePath> + </File> + </Files> + <Files> + <File> + <FileName>stm32wlxx_hal_cryp_ex.c</FileName> + <FileType>1</FileType> + <FilePath>..\libraries\STM32WLxx_HAL\STM32WLxx_HAL_Driver\Src\stm32wlxx_hal_cryp_ex.c</FilePath> + </File> + </Files> + </Group> + </Groups> + </Target> + </Targets> + <RTE> + <apis /> + <components /> + <files /> + </RTE> +</Project> diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/rtconfig.h b/bsp/stm32/stm32wle5-yizhilian-lm401/rtconfig.h new file mode 100644 index 0000000000..aba778e0dc --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/rtconfig.h @@ -0,0 +1,188 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 100 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice optimization */ + + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "lpuart1" +#define RT_VER_NUM 0x40004 +#define ARCH_ARM +#define RT_USING_CPU_FFS +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M4 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define RT_USING_MSH +#define FINSH_USING_MSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_CMD_SIZE 80 +#define MSH_USING_BUILT_IN_COMMANDS +#define FINSH_USING_DESCRIPTION +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* POSIX layer and C standard library */ + + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread Utestcases */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* U8G2: a monochrome graphic library */ + + +/* tools packages */ + + +/* system packages */ + +/* acceleration: Assembly language or algorithmic acceleration packages */ + + +/* Micrium: Micrium software products porting for RT-Thread */ + + +/* peripheral libraries and drivers */ + + +/* AI packages */ + + +/* miscellaneous packages */ + +/* samples: kernel and components samples */ + + +/* entertainment: terminal games and other interesting software packages */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32WL + +/* Hardware Drivers Config */ + +#define SOC_STM32WLE5CB + +/* Onboard Peripheral Drivers */ + +#define BSP_USING_USB_TO_UART + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_LPUART1 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/rtconfig.py b/bsp/stm32/stm32wle5-yizhilian-lm401/rtconfig.py new file mode 100644 index 0000000000..fc0386eaea --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/rtconfig.py @@ -0,0 +1,177 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m4' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict --scatter "board\linker_scripts\link.sct"' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'armclang': + # toolchains + CC = 'armclang' + CXX = 'armclang' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-m4 ' + CFLAGS += ' -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 ' + CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar ' + CFLAGS += ' -gdwarf-3 -ffunction-sections ' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers ' + LFLAGS += ' --list rt-thread.map ' + LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" ' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib' + + EXEC_PATH += '/ARM/ARMCLANG/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O1' # armclang recommend + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv4_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu VFPv4_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/template.uvoptx b/bsp/stm32/stm32wle5-yizhilian-lm401/template.uvoptx new file mode 100644 index 0000000000..1fbdc86a88 --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/template.uvoptx @@ -0,0 +1,190 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Extensions> + <cExt>*.c</cExt> + <aExt>*.s*; *.src; *.a*</aExt> + <oExt>*.obj; *.o</oExt> + <lExt>*.lib</lExt> + <tExt>*.txt; *.h; *.inc</tExt> + <pExt>*.plm</pExt> + <CppX>*.cpp</CppX> + <nMigrate>0</nMigrate> + </Extensions> + + <DaveTm> + <dwLowDateTime>0</dwLowDateTime> + <dwHighDateTime>0</dwHighDateTime> + </DaveTm> + + <Target> + <TargetName>rt-thread</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <CLKADS>12000000</CLKADS> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + <RunAbUc>0</RunAbUc> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>0</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\build\keil\List\</ListingPath> + </OPTLEX> + <ListingPage> + <CreateCListing>1</CreateCListing> + <CreateAListing>1</CreateAListing> + <CreateLListing>1</CreateLListing> + <CreateIListing>0</CreateIListing> + <AsmCond>1</AsmCond> + <AsmSymb>1</AsmSymb> + <AsmXref>0</AsmXref> + <CCond>1</CCond> + <CCode>0</CCode> + <CListInc>0</CListInc> + <CSymb>0</CSymb> + <LinkerCodeListing>0</LinkerCodeListing> + </ListingPage> + <OPTXL> + <LMap>1</LMap> + <LComments>1</LComments> + <LGenerateSymbols>1</LGenerateSymbols> + <LLibSym>1</LLibSym> + <LLines>1</LLines> + <LLocSym>1</LLocSym> + <LPubSym>1</LPubSym> + <LXref>0</LXref> + <LExpSel>0</LExpSel> + </OPTXL> + <OPTFL> + <tvExp>1</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> + <CpuCode>18</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>1</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <bEvRecOn>1</bEvRecOn> + <bSchkAxf>0</bSchkAxf> + <bTchkAxf>0</bTchkAxf> + <nTsel>6</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>ST-LINKIII-KEIL_SWO</Key> + <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -TO18 -TC10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO31 -FD20000000 -FC1000 -FN1 -FF0STM32WLExx_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32WLxx_CM4 -FL020000 -FS08000000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U59300616 -O47 -S8 -ZTIFSpeedSel50000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8001 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0STM32WLExx_128.FLM -FS08000000 -FL0020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + <bLintAuto>0</bLintAuto> + <bAutoGenD>0</bAutoGenD> + <LntExFlags>0</LntExFlags> + <pMisraName></pMisraName> + <pszMrule></pszMrule> + <pSingCmds></pSingCmds> + <pMultCmds></pMultCmds> + <pMisraNamep></pMisraNamep> + <pszMrulep></pszMrulep> + <pSingCmdsp></pSingCmdsp> + <pMultCmdsp></pMultCmdsp> + </TargetOption> + </Target> + + <Group> + <GroupName>Source Group 1</GroupName> + <tvExp>0</tvExp> + <tvExpOptDlg>0</tvExpOptDlg> + <cbSel>0</cbSel> + <RteFlg>0</RteFlg> + </Group> + +</ProjectOpt> diff --git a/bsp/stm32/stm32wle5-yizhilian-lm401/template.uvprojx b/bsp/stm32/stm32wle5-yizhilian-lm401/template.uvprojx new file mode 100644 index 0000000000..02e6c42bda --- /dev/null +++ b/bsp/stm32/stm32wle5-yizhilian-lm401/template.uvprojx @@ -0,0 +1,395 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + + <SchemaVersion>2.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> + <Target> + <TargetName>rt-thread</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed> + <uAC6>0</uAC6> + <TargetOption> + <TargetCommonOption> + <Device>STM32WLE5CBUx</Device> + <Vendor>STMicroelectronics</Vendor> + <PackID>Keil.STM32WLxx_DFP.1.0.7</PackID> + <PackURL>http://www.keil.com/pack</PackURL> + <Cpu>IRAM(0x20000000,0x4000) IROM(0x08000000,0x20000) CPUTYPE("Cortex-M4") CLOCK(12000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32WLxx_CM4 -FS08000000 -FL020000 -FP0($$Device:STM32WLE5CBUx$CMSIS\Flash\STM32WLExx_128.FLM))</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:STM32WLE5CBUx$Drivers\Device\ST\STM32WLxx\Include\stm32wlxx.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>$$Device:STM32WLE5CBUx$CMSIS\SVD\STM32WLE5_CM4.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\build\keil\Obj\</OutputDirectory> + <OutputName>rt-thread</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>0</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\build\keil\List\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>1</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName>SARMCM3.DLL</SimDllName> + <SimDllArguments> -REMAP -MPU</SimDllArguments> + <SimDlgDll>DCM.DLL</SimDlgDll> + <SimDlgDllArguments>-pCM4</SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments> -MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4096</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>BIN\UL2CM3.DLL</Flash2> + <Flash3>"" ()</Flash3> + <Flash4></Flash4> + <pFcarmOut></pFcarmOut> + <pFcarmGrp></pFcarmGrp> + <pFcArmRoot></pFcArmRoot> + <FcArmLst>0</FcArmLst> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>0</RvdsVP> + <RvdsMve>0</RvdsMve> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>0</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x4000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x8000000</StartAddress> + <Size>0x20000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x8000000</StartAddress> + <Size>0x20000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x4000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>1</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <uGnu>0</uGnu> + <useXO>0</useXO> + <v6Lang>1</v6Lang> + <v6LangP>1</v6LangP> + <vShortEn>1</vShortEn> + <vShortWch>1</vShortWch> + <v6Lto>0</v6Lto> + <v6WtE>0</v6WtE> + <v6Rtti>0</v6Rtti> + <VariousControls> + <MiscControls></MiscControls> + <Define></Define> + <Undefine></Undefine> + <IncludePath></IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <uClangAs>0</uClangAs> + <VariousControls> + <MiscControls></MiscControls> + <Define></Define> + <Undefine></Undefine> + <IncludePath></IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>0</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x08000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase></pXoBase> + <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc></Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> + <Group> + <GroupName>Source Group 1</GroupName> + </Group> + </Groups> + </Target> + </Targets> + + <RTE> + <apis/> + <components/> + <files/> + </RTE> + +</Project> |
