summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--libcpu/arm/lpc1100/CMSIS/LPC11xx.h499
-rw-r--r--libcpu/arm/lpc1100/CMSIS/core_cm0.c455
-rw-r--r--libcpu/arm/lpc1100/CMSIS/core_cm0.h960
-rw-r--r--libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c450
-rw-r--r--libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h64
-rw-r--r--libcpu/arm/lpc1100/context_rvds.S175
-rw-r--r--libcpu/arm/lpc1100/cpu.c42
-rw-r--r--libcpu/arm/lpc1100/fault.c47
-rw-r--r--libcpu/arm/lpc1100/fault_rvds.S32
-rw-r--r--libcpu/arm/lpc1100/interrupt.c21
-rw-r--r--libcpu/arm/lpc1100/stack.c54
-rw-r--r--libcpu/arm/lpc1100/start_rvds.S252
12 files changed, 0 insertions, 3051 deletions
diff --git a/libcpu/arm/lpc1100/CMSIS/LPC11xx.h b/libcpu/arm/lpc1100/CMSIS/LPC11xx.h
deleted file mode 100644
index 58c4de507a..0000000000
--- a/libcpu/arm/lpc1100/CMSIS/LPC11xx.h
+++ /dev/null
@@ -1,499 +0,0 @@
-/**************************************************************************//**
- * @file LPC11xx.h
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
- * NXP LPC11xx Device Series
- * @version V1.00
- * @date 17. November 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#ifndef __LPC11xx_H__
-#define __LPC11xx_H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup LPC11xx_Definitions LPC11xx Definitions
- This file defines all structures and symbols for LPC11xx:
- - Registers and bitfields
- - peripheral base address
- - peripheral ID
- - PIO definitions
- @{
-*/
-
-
-/******************************************************************************/
-/* Processor and Core Peripherals */
-/******************************************************************************/
-/** @addtogroup LPC11xx_CMSIS LPC11xx CMSIS Definitions
- Configuration of the Cortex-M0 Processor and Core Peripherals
- @{
-*/
-
-/*
- * ==========================================================================
- * ---------- Interrupt Number Definition -----------------------------------
- * ==========================================================================
- */
-
-typedef enum IRQn
-{
-/****** Cortex-M0 Processor Exceptions Numbers ***************************************************/
- NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
- HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
- SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
- PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
- SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
-
-/****** LPC11xx Specific Interrupt Numbers *******************************************************/
- WAKEUP0_IRQn = 0, /*!< All I/O pins can be used as wakeup source. */
- WAKEUP1_IRQn = 1, /*!< There are 13 pins in total for LPC11xx */
- WAKEUP2_IRQn = 2,
- WAKEUP3_IRQn = 3,
- WAKEUP4_IRQn = 4,
- WAKEUP5_IRQn = 5,
- WAKEUP6_IRQn = 6,
- WAKEUP7_IRQn = 7,
- WAKEUP8_IRQn = 8,
- WAKEUP9_IRQn = 9,
- WAKEUP10_IRQn = 10,
- WAKEUP11_IRQn = 11,
- WAKEUP12_IRQn = 12,
- SSP1_IRQn = 14, /*!< SSP1 Interrupt */
- I2C_IRQn = 15, /*!< I2C Interrupt */
- TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */
- TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */
- TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */
- TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */
- SSP0_IRQn = 20, /*!< SSP0 Interrupt */
- UART_IRQn = 21, /*!< UART Interrupt */
- ADC_IRQn = 24, /*!< A/D Converter Interrupt */
- WDT_IRQn = 25, /*!< Watchdog timer Interrupt */
- BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */
- EINT3_IRQn = 28, /*!< External Interrupt 3 Interrupt */
- EINT2_IRQn = 29, /*!< External Interrupt 2 Interrupt */
- EINT1_IRQn = 30, /*!< External Interrupt 1 Interrupt */
- EINT0_IRQn = 31, /*!< External Interrupt 0 Interrupt */
-} IRQn_Type;
-
-
-/*
- * ==========================================================================
- * ----------- Processor and Core Peripheral Section ------------------------
- * ==========================================================================
- */
-
-/* Configuration of the Cortex-M3 Processor and Core Peripherals */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-
-/*@}*/ /* end of group LPC11xx_CMSIS */
-
-
-#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
-#include "system_LPC11xx.h" /* System Header */
-
-
-/******************************************************************************/
-/* Device Specific Peripheral Registers structures */
-/******************************************************************************/
-
-#if defined ( __CC_ARM )
-#pragma anon_unions
-#endif
-
-/*------------- System Control (SYSCON) --------------------------------------*/
-/** @addtogroup LPC11xx_SYSCON LPC11xx System Control Block
- @{
-*/
-typedef struct
-{
- __IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */
- __IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */
- __IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */
- __IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/ ) */
- uint32_t RESERVED0[4];
-
- __IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */
- __IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */
- __IO uint32_t IRCCTRL; /*!< Offset: 0x028 IRC control (R/W) */
- uint32_t RESERVED1[1];
- __IO uint32_t SYSRESSTAT; /*!< Offset: 0x030 System reset status Register (R/ ) */
- uint32_t RESERVED2[3];
- __IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */
- __IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */
- uint32_t RESERVED3[10];
-
- __IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */
- __IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */
- __IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */
- uint32_t RESERVED4[1];
-
- __IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */
- uint32_t RESERVED5[4];
- __IO uint32_t SSP0CLKDIV; /*!< Offset: 0x094 SSP0 clock divider (R/W) */
- __IO uint32_t UARTCLKDIV; /*!< Offset: 0x098 UART clock divider (R/W) */
- __IO uint32_t SSP1CLKDIV; /*!< Offset: 0x09C SSP1 clock divider (R/W) */
- uint32_t RESERVED6[4];
-
- __IO uint32_t SYSTICKCLKDIV; /*!< Offset: 0x0B0 SYSTICK clock divider (R/W) */
- uint32_t RESERVED7[7];
-
- __IO uint32_t WDTCLKSEL; /*!< Offset: 0x0D0 WDT clock source select (R/W) */
- __IO uint32_t WDTCLKUEN; /*!< Offset: 0x0D4 WDT clock source update enable (R/W) */
- __IO uint32_t WDTCLKDIV; /*!< Offset: 0x0D8 WDT clock divider (R/W) */
- uint32_t RESERVED8[1];
- __IO uint32_t CLKOUTCLKSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */
- __IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */
- __IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */
- uint32_t RESERVED9[5];
-
- __IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */
- __IO uint32_t PIOPORCAP1; /*!< Offset: 0x104 POR captured PIO status 1 (R/ ) */
- uint32_t RESERVED10[18];
-
- __IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */
- uint32_t RESERVED11[1];
- __IO uint32_t SYSTCKCAL; /*!< Offset: 0x158 System tick counter calibration (R/W) */
- uint32_t RESERVED12[41];
-
- __IO uint32_t STARTAPRP0; /*!< Offset: 0x200 Start logic edge control Register 0 (R/W) */
- __IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */
- __IO uint32_t STARTRSRP0CLR; /*!< Offset: 0x208 Start logic reset Register 0 ( /W) */
- __IO uint32_t STARTSRP0; /*!< Offset: 0x20C Start logic status Register 0 (R/W) */
- uint32_t RESERVED14[8];
-
- __IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */
- __IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */
- __IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */
- uint32_t RESERVED15[110];
- __I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */
-} LPC_SYSCON_TypeDef;
-/*@}*/ /* end of group LPC11xx_SYSCON */
-
-
-/*------------- Pin Connect Block (IOCON) --------------------------------*/
-/** @addtogroup LPC11xx_IOCON LPC11xx I/O Configuration Block
- @{
-*/
-typedef struct
-{
- __IO uint32_t PIO2_6; /*!< Offset: 0x000 I/O configuration for pin PIO2_6 (R/W) */
- uint32_t RESERVED0[1];
- __IO uint32_t PIO2_0; /*!< Offset: 0x008 I/O configuration for pin PIO2_0/DTR/SSEL1 (R/W) */
- __IO uint32_t RESET_PIO0_0; /*!< Offset: 0x00C I/O configuration for pin RESET/PIO0_0 (R/W) */
- __IO uint32_t PIO0_1; /*!< Offset: 0x010 I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2 (R/W) */
- __IO uint32_t PIO1_8; /*!< Offset: 0x014 I/O configuration for pin PIO1_8/CT16B1_CAP0 (R/W) */
- uint32_t RESERVED1[1];
- __IO uint32_t PIO0_2; /*!< Offset: 0x01C I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 (R/W) */
-
- __IO uint32_t PIO2_7; /*!< Offset: 0x020 I/O configuration for pin PIO2_7 (R/W) */
- __IO uint32_t PIO2_8; /*!< Offset: 0x024 I/O configuration for pin PIO2_8 (R/W) */
- __IO uint32_t PIO2_1; /*!< Offset: 0x028 I/O configuration for pin PIO2_1/nDSR/SCK1 (R/W) */
- __IO uint32_t PIO0_3; /*!< Offset: 0x02C I/O configuration for pin PIO0_3 (R/W) */
- __IO uint32_t PIO0_4; /*!< Offset: 0x030 I/O configuration for pin PIO0_4/SCL (R/W) */
- __IO uint32_t PIO0_5; /*!< Offset: 0x034 I/O configuration for pin PIO0_5/SDA (R/W) */
- __IO uint32_t PIO1_9; /*!< Offset: 0x038 I/O configuration for pin PIO1_9/CT16B1_MAT0 (R/W) */
- __IO uint32_t PIO3_4; /*!< Offset: 0x03C I/O configuration for pin PIO3_4 (R/W) */
-
- __IO uint32_t PIO2_4; /*!< Offset: 0x040 I/O configuration for pin PIO2_4 (R/W) */
- __IO uint32_t PIO2_5; /*!< Offset: 0x044 I/O configuration for pin PIO2_5 (R/W) */
- __IO uint32_t PIO3_5; /*!< Offset: 0x048 I/O configuration for pin PIO3_5 (R/W) */
- __IO uint32_t PIO0_6; /*!< Offset: 0x04C I/O configuration for pin PIO0_6/SCK0 (R/W) */
- __IO uint32_t PIO0_7; /*!< Offset: 0x050 I/O configuration for pin PIO0_7/nCTS (R/W) */
- __IO uint32_t PIO2_9; /*!< Offset: 0x054 I/O configuration for pin PIO2_9 (R/W) */
- __IO uint32_t PIO2_10; /*!< Offset: 0x058 I/O configuration for pin PIO2_10 (R/W) */
- __IO uint32_t PIO2_2; /*!< Offset: 0x05C I/O configuration for pin PIO2_2/DCD/MISO1 (R/W) */
-
- __IO uint32_t PIO0_8; /*!< Offset: 0x060 I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 (R/W) */
- __IO uint32_t PIO0_9; /*!< Offset: 0x064 I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 (R/W) */
- __IO uint32_t JTAG_TCK_PIO0_10; /*!< Offset: 0x068 I/O configuration for pin SWCLK/PIO0_10/SCK0/CT16B0_MAT2 (R/W) */
- __IO uint32_t PIO1_10; /*!< Offset: 0x06C I/O configuration for pin PIO1_10/AD6/CT16B1_MAT1 (R/W) */
- __IO uint32_t PIO2_11; /*!< Offset: 0x070 I/O configuration for pin PIO2_11/SCK0 (R/W) */
- __IO uint32_t JTAG_TDI_PIO0_11; /*!< Offset: 0x074 I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 (R/W) */
- __IO uint32_t JTAG_TMS_PIO1_0; /*!< Offset: 0x078 I/O configuration for pin TMS/PIO1_0/AD1/CT32B1_CAP0 (R/W) */
- __IO uint32_t JTAG_TDO_PIO1_1; /*!< Offset: 0x07C I/O configuration for pin TDO/PIO1_1/AD2/CT32B1_MAT0 (R/W) */
-
- __IO uint32_t JTAG_nTRST_PIO1_2; /*!< Offset: 0x080 I/O configuration for pin nTRST/PIO1_2/AD3/CT32B1_MAT1 (R/W) */
- __IO uint32_t PIO3_0; /*!< Offset: 0x084 I/O configuration for pin PIO3_0/nDTR (R/W) */
- __IO uint32_t PIO3_1; /*!< Offset: 0x088 I/O configuration for pin PIO3_1/nDSR (R/W) */
- __IO uint32_t PIO2_3; /*!< Offset: 0x08C I/O configuration for pin PIO2_3/RI/MOSI1 (R/W) */
- __IO uint32_t ARM_SWDIO_PIO1_3; /*!< Offset: 0x090 I/O configuration for pin SWDIO/PIO1_3/AD4/CT32B1_MAT2 (R/W) */
- __IO uint32_t PIO1_4; /*!< Offset: 0x094 I/O configuration for pin PIO1_4/AD5/CT32B1_MAT3 (R/W) */
- __IO uint32_t PIO1_11; /*!< Offset: 0x098 I/O configuration for pin PIO1_11/AD7 (R/W) */
- __IO uint32_t PIO3_2; /*!< Offset: 0x09C I/O configuration for pin PIO3_2/nDCD (R/W) */
-
- __IO uint32_t PIO1_5; /*!< Offset: 0x0A0 I/O configuration for pin PIO1_5/nRTS/CT32B0_CAP0 (R/W) */
- __IO uint32_t PIO1_6; /*!< Offset: 0x0A4 I/O configuration for pin PIO1_6/RXD/CT32B0_MAT0 (R/W) */
- __IO uint32_t PIO1_7; /*!< Offset: 0x0A8 I/O configuration for pin PIO1_7/TXD/CT32B0_MAT1 (R/W) */
- __IO uint32_t PIO3_3; /*!< Offset: 0x0AC I/O configuration for pin PIO3_3/nRI (R/W) */
- __IO uint32_t SCK_LOC; /*!< Offset: 0x0B0 SCK pin location select Register (R/W) */
- __IO uint32_t DSR_LOC; /*!< Offset: 0x0B4 DSR pin location select Register (R/W) */
- __IO uint32_t DCD_LOC; /*!< Offset: 0x0B8 DCD pin location select Register (R/W) */
- __IO uint32_t RI_LOC; /*!< Offset: 0x0BC RI pin location Register (R/W) */
-} LPC_IOCON_TypeDef;
-/*@}*/ /* end of group LPC11xx_IOCON */
-
-
-/*------------- Power Management Unit (PMU) --------------------------*/
-/** @addtogroup LPC11xx_PMU LPC11xx Power Management Unit
- @{
-*/
-typedef struct
-{
- __IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */
- __IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */
- __IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */
- __IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */
- __IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */
- __IO uint32_t GPREG4; /*!< Offset: 0x014 General purpose Register 4 (R/W) */
-} LPC_PMU_TypeDef;
-/*@}*/ /* end of group LPC11xx_PMU */
-
-
-/*------------- General Purpose Input/Output (GPIO) --------------------------*/
-/** @addtogroup LPC11xx_GPIO LPC11xx General Purpose Input/Output
- @{
-*/
-typedef struct
-{
- union {
- __IO uint32_t MASKED_ACCESS[4096]; /*!< Offset: 0x0000 to 0x3FFC Port data Register for pins PIOn_0 to PIOn_11 (R/W) */
- struct {
- uint32_t RESERVED0[4095];
- __IO uint32_t DATA; /*!< Offset: 0x3FFC Port data Register (R/W) */
- };
- };
- uint32_t RESERVED1[4096];
- __IO uint32_t DIR; /*!< Offset: 0x8000 Data direction Register (R/W) */
- __IO uint32_t IS; /*!< Offset: 0x8004 Interrupt sense Register (R/W) */
- __IO uint32_t IBE; /*!< Offset: 0x8008 Interrupt both edges Register (R/W) */
- __IO uint32_t IEV; /*!< Offset: 0x800C Interrupt event Register (R/W) */
- __IO uint32_t IE; /*!< Offset: 0x8010 Interrupt mask Register (R/W) */
- __IO uint32_t RIS; /*!< Offset: 0x8014 Raw interrupt status Register (R/ ) */
- __IO uint32_t MIS; /*!< Offset: 0x8018 Masked interrupt status Register (R/ ) */
- __IO uint32_t IC; /*!< Offset: 0x801C Interrupt clear Register (R/W) */
-} LPC_GPIO_TypeDef;
-/*@}*/ /* end of group LPC11xx_GPIO */
-
-
-/*------------- Timer (TMR) --------------------------------------------------*/
-/** @addtogroup LPC11xx_TMR LPC11xx 16/32-bit Counter/Timer
- @{
-*/
-typedef struct
-{
- __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */
- __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */
- __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */
- __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */
- __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */
- __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */
- __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */
- __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */
- __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */
- __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */
- __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */
- __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */
- uint32_t RESERVED1[3];
- __IO uint32_t EMR; /*!< Offset: 0x03C External Match Register (R/W) */
- uint32_t RESERVED2[12];
- __IO uint32_t CTCR; /*!< Offset: 0x070 Count Control Register (R/W) */
- __IO uint32_t PWMC; /*!< Offset: 0x074 PWM Control Register (R/W) */
-} LPC_TMR_TypeDef;
-/*@}*/ /* end of group LPC11xx_TMR */
-
-
-/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/
-/** @addtogroup LPC11xx_UART LPC11xx Universal Asynchronous Receiver/Transmitter
- @{
-*/
-typedef struct
-{
- union {
- __I uint32_t RBR; /*!< Offset: 0x000 Receiver Buffer Register (R/ ) */
- __O uint32_t THR; /*!< Offset: 0x000 Transmit Holding Register ( /W) */
- __IO uint32_t DLL; /*!< Offset: 0x000 Divisor Latch LSB (R/W) */
- };
- union {
- __IO uint32_t DLM; /*!< Offset: 0x004 Divisor Latch MSB (R/W) */
- __IO uint32_t IER; /*!< Offset: 0x000 Interrupt Enable Register (R/W) */
- };
- union {
- __I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register (R/ ) */
- __O uint32_t FCR; /*!< Offset: 0x008 FIFO Control Register ( /W) */
- };
- __IO uint32_t LCR; /*!< Offset: 0x00C Line Control Register (R/W) */
- __IO uint32_t MCR; /*!< Offset: 0x010 Modem control Register (R/W) */
- __I uint32_t LSR; /*!< Offset: 0x014 Line Status Register (R/ ) */
- __I uint32_t MSR; /*!< Offset: 0x018 Modem status Register (R/ ) */
- __IO uint32_t SCR; /*!< Offset: 0x01C Scratch Pad Register (R/W) */
- __IO uint32_t ACR; /*!< Offset: 0x020 Auto-baud Control Register (R/W) */
- uint32_t RESERVED0;
- __IO uint32_t FDR; /*!< Offset: 0x028 Fractional Divider Register (R/W) */
- uint32_t RESERVED1;
- __IO uint32_t TER; /*!< Offset: 0x030 Transmit Enable Register (R/W) */
- uint32_t RESERVED2[6];
- __IO uint32_t RS485CTRL; /*!< Offset: 0x04C RS-485/EIA-485 Control Register (R/W) */
- __IO uint32_t ADRMATCH; /*!< Offset: 0x050 RS-485/EIA-485 address match Register (R/W) */
- __IO uint32_t RS485DLY; /*!< Offset: 0x054 RS-485/EIA-485 direction control delay Register (R/W) */
- __I uint32_t FIFOLVL; /*!< Offset: 0x058 FIFO Level Register (R/ ) */
-} LPC_UART_TypeDef;
-/*@}*/ /* end of group LPC11xx_UART */
-
-
-/*------------- Synchronous Serial Communication (SSP) -----------------------*/
-/** @addtogroup LPC11xx_SSP LPC11xx Synchronous Serial Port
- @{
-*/
-typedef struct
-{
- __IO uint32_t CR0; /*!< Offset: 0x000 Control Register 0 (R/W) */
- __IO uint32_t CR1; /*!< Offset: 0x004 Control Register 1 (R/W) */
- __IO uint32_t DR; /*!< Offset: 0x008 Data Register (R/W) */
- __I uint32_t SR; /*!< Offset: 0x00C Status Registe (R/ ) */
- __IO uint32_t CPSR; /*!< Offset: 0x010 Clock Prescale Register (R/W) */
- __IO uint32_t IMSC; /*!< Offset: 0x014 Interrupt Mask Set and Clear Register (R/W) */
- __IO uint32_t RIS; /*!< Offset: 0x018 Raw Interrupt Status Register (R/W) */
- __IO uint32_t MIS; /*!< Offset: 0x01C Masked Interrupt Status Register (R/W) */
- __IO uint32_t ICR; /*!< Offset: 0x020 SSPICR Interrupt Clear Register (R/W) */
-} LPC_SSP_TypeDef;
-/*@}*/ /* end of group LPC11xx_SSP */
-
-
-/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
-/** @addtogroup LPC11xx_I2C LPC11xx I2C-Bus Interface
- @{
-*/
-typedef struct
-{
- __IO uint32_t CONSET; /*!< Offset: 0x000 I2C Control Set Register (R/W) */
- __I uint32_t STAT; /*!< Offset: 0x004 I2C Status Register (R/ ) */
- __IO uint32_t DAT; /*!< Offset: 0x008 I2C Data Register (R/W) */
- __IO uint32_t ADR0; /*!< Offset: 0x00C I2C Slave Address Register 0 (R/W) */
- __IO uint32_t SCLH; /*!< Offset: 0x010 SCH Duty Cycle Register High Half Word (R/W) */
- __IO uint32_t SCLL; /*!< Offset: 0x014 SCL Duty Cycle Register Low Half Word (R/W) */
- __O uint32_t CONCLR; /*!< Offset: 0x018 I2C Control Clear Register ( /W) */
- __IO uint32_t MMCTRL; /*!< Offset: 0x01C Monitor mode control register (R/W) */
- __IO uint32_t ADR1; /*!< Offset: 0x020 I2C Slave Address Register 1 (R/W) */
- __IO uint32_t ADR2; /*!< Offset: 0x024 I2C Slave Address Register 2 (R/W) */
- __IO uint32_t ADR3; /*!< Offset: 0x028 I2C Slave Address Register 3 (R/W) */
- __I uint32_t DATA_BUFFER; /*!< Offset: 0x02C Data buffer register ( /W) */
- __IO uint32_t MASK0; /*!< Offset: 0x030 I2C Slave address mask register 0 (R/W) */
- __IO uint32_t MASK1; /*!< Offset: 0x034 I2C Slave address mask register 1 (R/W) */
- __IO uint32_t MASK2; /*!< Offset: 0x038 I2C Slave address mask register 2 (R/W) */
- __IO uint32_t MASK3; /*!< Offset: 0x03C I2C Slave address mask register 3 (R/W) */
-} LPC_I2C_TypeDef;
-/*@}*/ /* end of group LPC11xx_I2C */
-
-
-/*------------- Watchdog Timer (WDT) -----------------------------------------*/
-/** @addtogroup LPC11xx_WDT LPC11xx WatchDog Timer
- @{
-*/
-typedef struct
-{
- __IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */
- __IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */
- __O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register ( /W) */
- __I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R/ ) */
-} LPC_WDT_TypeDef;
-/*@}*/ /* end of group LPC11xx_WDT */
-
-
-/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
-/** @addtogroup LPC11xx_ADC LPC11xx Analog-to-Digital Converter
- @{
-*/
-typedef struct
-{
- __IO uint32_t CR; /*!< Offset: 0x000 A/D Control Register (R/W) */
- __IO uint32_t GDR; /*!< Offset: 0x004 A/D Global Data Register (R/W) */
- uint32_t RESERVED0;
- __IO uint32_t INTEN; /*!< Offset: 0x00C A/D Interrupt Enable Register (R/W) */
- __IO uint32_t DR[8]; /*!< Offset: 0x010-0x02C A/D Channel 0..7 Data Register (R/W) */
- __I uint32_t STAT; /*!< Offset: 0x030 A/D Status Register (R/ ) */
-} LPC_ADC_TypeDef;
-/*@}*/ /* end of group LPC11xx_ADC */
-
-
-#if defined ( __CC_ARM )
-#pragma no_anon_unions
-#endif
-
-/******************************************************************************/
-/* Peripheral memory map */
-/******************************************************************************/
-/* Base addresses */
-#define LPC_FLASH_BASE (0x00000000UL)
-#define LPC_RAM_BASE (0x10000000UL)
-#define LPC_APB0_BASE (0x40000000UL)
-#define LPC_AHB_BASE (0x50000000UL)
-
-/* APB0 peripherals */
-#define LPC_I2C_BASE (LPC_APB0_BASE + 0x00000)
-#define LPC_WDT_BASE (LPC_APB0_BASE + 0x04000)
-#define LPC_UART_BASE (LPC_APB0_BASE + 0x08000)
-#define LPC_CT16B0_BASE (LPC_APB0_BASE + 0x0C000)
-#define LPC_CT16B1_BASE (LPC_APB0_BASE + 0x10000)
-#define LPC_CT32B0_BASE (LPC_APB0_BASE + 0x14000)
-#define LPC_CT32B1_BASE (LPC_APB0_BASE + 0x18000)
-#define LPC_ADC_BASE (LPC_APB0_BASE + 0x1C000)
-#define LPC_PMU_BASE (LPC_APB0_BASE + 0x38000)
-#define LPC_SSP0_BASE (LPC_APB0_BASE + 0x40000)
-#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000)
-#define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000)
-#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x58000)
-
-/* AHB peripherals */
-#define LPC_GPIO_BASE (LPC_AHB_BASE + 0x00000)
-#define LPC_GPIO0_BASE (LPC_AHB_BASE + 0x00000)
-#define LPC_GPIO1_BASE (LPC_AHB_BASE + 0x10000)
-#define LPC_GPIO2_BASE (LPC_AHB_BASE + 0x20000)
-#define LPC_GPIO3_BASE (LPC_AHB_BASE + 0x30000)
-
-/******************************************************************************/
-/* Peripheral declaration */
-/******************************************************************************/
-#define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE )
-#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
-#define LPC_UART ((LPC_UART_TypeDef *) LPC_UART_BASE )
-#define LPC_TMR16B0 ((LPC_TMR_TypeDef *) LPC_CT16B0_BASE)
-#define LPC_TMR16B1 ((LPC_TMR_TypeDef *) LPC_CT16B1_BASE)
-#define LPC_TMR32B0 ((LPC_TMR_TypeDef *) LPC_CT32B0_BASE)
-#define LPC_TMR32B1 ((LPC_TMR_TypeDef *) LPC_CT32B1_BASE)
-#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
-#define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE )
-#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
-#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
-#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE )
-#define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE)
-#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
-#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
-#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
-#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __LPC11xx_H__ */
diff --git a/libcpu/arm/lpc1100/CMSIS/core_cm0.c b/libcpu/arm/lpc1100/CMSIS/core_cm0.c
deleted file mode 100644
index c08a7b6c6e..0000000000
--- a/libcpu/arm/lpc1100/CMSIS/core_cm0.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/**************************************************************************//**
- * @file core_cm0.c
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Source File
- * @version V1.30
- * @date 30. October 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#include <stdint.h>
-
-/* define compiler specific symbols */
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-__ASM uint32_t __get_PSP(void)
-{
- mrs r0, psp
- bx lr
-}
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-__ASM void __set_PSP(uint32_t topOfProcStack)
-{
- msr psp, r0
- bx lr
-}
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-__ASM uint32_t __get_MSP(void)
-{
- mrs r0, msp
- bx lr
-}
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-__ASM void __set_MSP(uint32_t mainStackPointer)
-{
- msr msp, r0
- bx lr
-}
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-__ASM uint32_t __REV16(uint16_t value)
-{
- rev16 r0, r0
- bx lr
-}
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-__ASM int32_t __REVSH(int16_t value)
-{
- revsh r0, r0
- bx lr
-}
-
-
-#if (__ARMCC_VERSION < 400000)
-
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-__ASM uint32_t __get_PRIMASK(void)
-{
- mrs r0, primask
- bx lr
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-__ASM void __set_PRIMASK(uint32_t priMask)
-{
- msr primask, r0
- bx lr
-}
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-__ASM uint32_t __get_CONTROL(void)
-{
- mrs r0, control
- bx lr
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-__ASM void __set_CONTROL(uint32_t control)
-{
- msr control, r0
- bx lr
-}
-
-#endif /* __ARMCC_VERSION */
-
-
-
-#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-#pragma diag_suppress=Pe940
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-uint32_t __get_PSP(void)
-{
- __ASM("mrs r0, psp");
- __ASM("bx lr");
-}
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-void __set_PSP(uint32_t topOfProcStack)
-{
- __ASM("msr psp, r0");
- __ASM("bx lr");
-}
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-uint32_t __get_MSP(void)
-{
- __ASM("mrs r0, msp");
- __ASM("bx lr");
-}
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-void __set_MSP(uint32_t topOfMainStack)
-{
- __ASM("msr msp, r0");
- __ASM("bx lr");
-}
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-uint32_t __REV16(uint16_t value)
-{
- __ASM("rev16 r0, r0");
- __ASM("bx lr");
-}
-
-
-#pragma diag_default=Pe940
-
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-uint32_t __get_PSP(void) __attribute__( ( naked ) );
-uint32_t __get_PSP(void)
-{
- uint32_t result=0;
-
- __ASM volatile ("MRS %0, psp\n\t"
- "MOV r0, %0 \n\t"
- "BX lr \n\t" : "=r" (result) );
- return(result);
-}
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
-void __set_PSP(uint32_t topOfProcStack)
-{
- __ASM volatile ("MSR psp, %0\n\t"
- "BX lr \n\t" : : "r" (topOfProcStack) );
-}
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-uint32_t __get_MSP(void) __attribute__( ( naked ) );
-uint32_t __get_MSP(void)
-{
- uint32_t result=0;
-
- __ASM volatile ("MRS %0, msp\n\t"
- "MOV r0, %0 \n\t"
- "BX lr \n\t" : "=r" (result) );
- return(result);
-}
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
-void __set_MSP(uint32_t topOfMainStack)
-{
- __ASM volatile ("MSR msp, %0\n\t"
- "BX lr \n\t" : : "r" (topOfMainStack) );
-}
-
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-uint32_t __get_PRIMASK(void)
-{
- uint32_t result=0;
-
- __ASM volatile ("MRS %0, primask" : "=r" (result) );
- return(result);
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-void __set_PRIMASK(uint32_t priMask)
-{
- __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
-}
-
-/**
- * @brief Return the Control Register value
-*
-* @return Control value
- *
- * Return the content of the control register
- */
-uint32_t __get_CONTROL(void)
-{
- uint32_t result=0;
-
- __ASM volatile ("MRS %0, control" : "=r" (result) );
- return(result);
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-void __set_CONTROL(uint32_t control)
-{
- __ASM volatile ("MSR control, %0" : : "r" (control) );
-}
-
-
-/**
- * @brief Reverse byte order in integer value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in integer value
- */
-uint32_t __REV(uint32_t value)
-{
- uint32_t result=0;
-
- __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-uint32_t __REV16(uint16_t value)
-{
- uint32_t result=0;
-
- __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-int32_t __REVSH(int16_t value)
-{
- uint32_t result=0;
-
- __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-
-#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
diff --git a/libcpu/arm/lpc1100/CMSIS/core_cm0.h b/libcpu/arm/lpc1100/CMSIS/core_cm0.h
deleted file mode 100644
index f148b8fad5..0000000000
--- a/libcpu/arm/lpc1100/CMSIS/core_cm0.h
+++ /dev/null
@@ -1,960 +0,0 @@
-/**************************************************************************//**
- * @file core_cm0.h
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V1.30
- * @date 30. October 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CM0_CORE_H__
-#define __CM0_CORE_H__
-
-/** @addtogroup CMSIS_CM0_core_LintCinfiguration CMSIS CM0 Core Lint Configuration
- *
- * List of Lint messages which will be suppressed and not shown:
- * - not yet checked
- * .
- * Note: To re-enable a Message, insert a space before 'lint' *
- *
- */
-
-
-/** @addtogroup CMSIS_CM0_core_definitions CM0 Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core registers and bitfields
- - Cortex-M core peripheral base address
- @{
- */
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define __CM0_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x00) /*!< Cortex core */
-
-#include <stdint.h> /* Include standard types */
-
-#if defined (__ICCARM__)
- #include <intrinsics.h> /* IAR Intrinsics */
-#endif
-
-
-#ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 2 /*!< standard definition for NVIC Priority Bits */
-#endif
-
-
-
-
-/**
- * IO definitions
- *
- * define access restrictions to peripheral registers
- */
-
-#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
-#else
- #define __I volatile const /*!< defines 'read only' permissions */
-#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- ******************************************************************************/
-/** @addtogroup CMSIS_CM0_core_register CMSIS CM0 Core Register
- @{
-*/
-
-
-/** @addtogroup CMSIS_CM0_NVIC CMSIS CM0 NVIC
- memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
- @{
- */
-typedef struct
-{
- __IO uint32_t ISER[1]; /*!< (Offset: 0x000) Interrupt Set Enable Register */
- uint32_t RESERVED0[31];
- __IO uint32_t ICER[1]; /*!< (Offset: 0x080) Interrupt Clear Enable Register */
- uint32_t RSERVED1[31];
- __IO uint32_t ISPR[1]; /*!< (Offset: 0x100) Interrupt Set Pending Register */
- uint32_t RESERVED2[31];
- __IO uint32_t ICPR[1]; /*!< (Offset: 0x180) Interrupt Clear Pending Register */
- uint32_t RESERVED3[31];
- uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< (Offset: 0x3EC) Interrupt Priority Register */
-} NVIC_Type;
-/*@}*/ /* end of group CMSIS_CM0_NVIC */
-
-
-/** @addtogroup CMSIS_CM0_SCB CMSIS CM0 SCB
- memory mapped structure for System Control Block (SCB)
- @{
- */
-typedef struct
-{
- __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
- __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
- __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
- uint32_t RESERVED1;
- __IO uint32_t SHP[2]; /*!< Offset: 0x1C System Handlers Priority Registers. [0] is RESERVED */
- __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
- uint32_t RESERVED2[2];
- __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFul << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
-/*@}*/ /* end of group CMSIS_CM0_SCB */
-
-
-/** @addtogroup CMSIS_CM0_SysTick CMSIS CM0 SysTick
- memory mapped structure for SysTick
- @{
- */
-typedef struct
-{
- __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
- __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
- __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
- __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
-/*@}*/ /* end of group CMSIS_CM0_SysTick */
-
-
-/** @addtogroup CMSIS_CM0_CoreDebug CMSIS CM0 Core Debug
- memory mapped structure for Core Debug Register
- @{
- */
-typedef struct
-{
- __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
- __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
- __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
- __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register */
-#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register */
-#define CoreDebug_DEMCR_DWTENA_Pos 24 /*!< CoreDebug DEMCR: DWTENA Position */
-#define CoreDebug_DEMCR_DWTENA_Msk (1ul << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-/*@}*/ /* end of group CMSIS_CM0_CoreDebug */
-
-
-/* Memory mapping of Cortex-M0 Hardware */
-#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
-
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-/*@}*/ /* end of group CMSIS_CM0_core_register */
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- ******************************************************************************/
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#define __enable_fault_irq __enable_fiq
-#define __disable_fault_irq __disable_fiq
-
-#define __NOP __nop
-#define __WFI __wfi
-#define __WFE __wfe
-#define __SEV __sev
-#define __ISB() __isb(0)
-#define __DSB() __dsb(0)
-#define __DMB() __dmb(0)
-#define __REV __rev
-
-
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#if (__ARMCC_VERSION < 400000)
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-#else /* (__ARMCC_VERSION >= 400000) */
-
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-static __INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-static __INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-static __INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-#endif /* __ARMCC_VERSION */
-
-
-
-#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
-#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
-
-static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
-static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
-
-#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
-static __INLINE void __WFI() { __ASM ("wfi"); }
-static __INLINE void __WFE() { __ASM ("wfe"); }
-static __INLINE void __SEV() { __ASM ("sev"); }
-
-/* intrinsic void __ISB(void) */
-/* intrinsic void __DSB(void) */
-/* intrinsic void __DMB(void) */
-/* intrinsic void __set_PRIMASK(); */
-/* intrinsic void __get_PRIMASK(); */
-
-
-/* intrinsic uint32_t __REV(uint32_t value); */
-/* intrinsic uint32_t __REVSH(uint32_t value); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-
-
-
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); }
-static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); }
-
-static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); }
-static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); }
-
-static __INLINE void __NOP() { __ASM volatile ("nop"); }
-static __INLINE void __WFI() { __ASM volatile ("wfi"); }
-static __INLINE void __WFE() { __ASM volatile ("wfe"); }
-static __INLINE void __SEV() { __ASM volatile ("sev"); }
-static __INLINE void __ISB() { __ASM volatile ("isb"); }
-static __INLINE void __DSB() { __ASM volatile ("dsb"); }
-static __INLINE void __DMB() { __ASM volatile ("dmb"); }
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Control Register value
-*
-* @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-/**
- * @brief Reverse byte order in integer value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in integer value
- */
-extern uint32_t __REV(uint32_t value);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-
-/** @addtogroup CMSIS_CM0_Core_FunctionInterface CMSIS CM0 Core Function Interface
- Core Function Interface containing:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Reset Functions
-*/
-/*@{*/
-
-/* ########################## NVIC functions #################################### */
-
-/* Interrupt Priorities are WORD accessible only under ARMv6M */
-/* The following MACROS handle generation of the register offset and byte masks */
-#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
-#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
-#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
-
-
-/**
- * @brief Enable Interrupt in NVIC Interrupt Controller
- *
- * @param IRQn The positive number of the external interrupt to enable
- *
- * Enable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
-}
-
-/**
- * @brief Disable the interrupt line for external interrupt specified
- *
- * @param IRQn The positive number of the external interrupt to disable
- *
- * Disable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
-}
-
-/**
- * @brief Read the interrupt pending bit for a device specific interrupt source
- *
- * @param IRQn The number of the device specifc interrupt
- * @return 1 = interrupt pending, 0 = interrupt not pending
- *
- * Read the pending register in NVIC and return 1 if its status is pending,
- * otherwise it returns 0
- */
-static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
-}
-
-/**
- * @brief Set the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for set pending
- *
- * Set the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
-}
-
-/**
- * @brief Clear the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for clear pending
- *
- * Clear the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
-}
-
-/**
- * @brief Set the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for set priority
- * @param priority The priority to set
- *
- * Set the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
- (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
- else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
- (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
-}
-
-/**
- * @brief Read the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for get priority
- * @return The priority for the interrupt
- *
- * Read the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * The returned priority value is automatically aligned to the implemented
- * priority bits of the microcontroller.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if(IRQn < 0) {
- return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
- else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
-}
-
-
-
-/* ################################## SysTick function ############################################ */
-
-#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
-
-/**
- * @brief Initialize and start the SysTick counter and its interrupt.
- *
- * @param ticks number of ticks between two interrupts
- * @return 1 = failed, 0 = successful
- *
- * Initialise the system tick timer and its interrupt and start the
- * system tick timer / counter in free running mode to generate
- * periodical interrupts.
- */
-static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
- SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
- SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0); /* Function successful */
-}
-
-#endif
-
-
-
-
-/* ################################## Reset function ############################################ */
-
-/**
- * @brief Initiate a system reset request.
- *
- * Initiate a system reset request to reset the MCU
- */
-static __INLINE void NVIC_SystemReset(void)
-{
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
- while(1); /* wait until reset */
-}
-
-/*@}*/ /* end of group CMSIS_CM0_Core_FunctionInterface */
-
-#ifdef __cplusplus
-}
-#endif
-
-/*@}*/ /* end of group CMSIS_CM0_core_definitions */
-
-#endif /* __CM0_CORE_H__ */
-
-/*lint -restore */
diff --git a/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c b/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c
deleted file mode 100644
index acf8327afb..0000000000
--- a/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/**************************************************************************//**
- * @file system_LPC11xx.c
- * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Source File
- * for the NXP LPC11xx Device Series
- * @version V1.00
- * @date 17. November 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#include <stdint.h>
-#include "LPC11xx.h"
-
-/*
-//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
-*/
-
-/*--------------------- Clock Configuration ----------------------------------
-//
-// <e> Clock Configuration
-// <e1> System Clock Setup
-// <e2> System Oscillator Enable
-// <o3.1> Select System Oscillator Frequency Range
-// <0=> 1 - 20 MHz
-// <1=> 15 - 25 MHz
-// </e2>
-// <e4> Watchdog Oscillator Enable
-// <o5.0..4> Select Divider for Fclkana
-// <0=> 2 <1=> 4 <2=> 6 <3=> 8
-// <4=> 10 <5=> 12 <6=> 14 <7=> 16
-// <8=> 18 <9=> 20 <10=> 22 <11=> 24
-// <12=> 26 <13=> 28 <14=> 30 <15=> 32
-// <16=> 34 <17=> 36 <18=> 38 <19=> 40
-// <20=> 42 <21=> 44 <22=> 46 <23=> 48
-// <24=> 50 <25=> 52 <26=> 54 <27=> 56
-// <28=> 58 <29=> 60 <30=> 62 <31=> 64
-// <o5.5..8> Select Watchdog Oscillator Analog Frequency (Fclkana)
-// <0=> Disabled
-// <1=> 0.5 MHz
-// <2=> 0.8 MHz
-// <3=> 1.1 MHz
-// <4=> 1.4 MHz
-// <5=> 1.6 MHz
-// <6=> 1.8 MHz
-// <7=> 2.0 MHz
-// <8=> 2.2 MHz
-// <9=> 2.4 MHz
-// <10=> 2.6 MHz
-// <11=> 2.7 MHz
-// <12=> 2.9 MHz
-// <13=> 3.1 MHz
-// <14=> 3.2 MHz
-// <15=> 3.4 MHz
-// </e4>
-// <o6> Select Input Clock for sys_pllclkin (Register: SYSPLLCLKSEL)
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> WDT Oscillator
-// <3=> Invalid
-// <e7> Use System PLL
-// <i> F_pll = M * F_in
-// <i> F_in must be in the range of 10 MHz to 25 MHz
-// <o8.0..4> M: PLL Multiplier Selection
-// <1-32><#-1>
-// <o8.5..6> P: PLL Divider Selection
-// <0=> 2
-// <1=> 4
-// <2=> 8
-// <3=> 16
-// <o8.7> DIRECT: Direct CCO Clock Output Enable
-// <o8.8> BYPASS: PLL Bypass Enable
-// </e7>
-// <o9> Select Input Clock for Main clock (Register: MAINCLKSEL)
-// <0=> IRC Oscillator
-// <1=> Input Clock to System PLL
-// <2=> WDT Oscillator
-// <3=> System PLL Clock Out
-// </e1>
-// <o10.0..7> System AHB Divider <0-255>
-// <i> 0 = is disabled
-// <o11.0> SYS Clock Enable
-// <o11.1> ROM Clock Enable
-// <o11.2> RAM Clock Enable
-// <o11.3> FLASHREG Flash Register Interface Clock Enable
-// <o11.4> FLASHARRAY Flash Array Access Clock Enable
-// <o11.5> I2C Clock Enable
-// <o11.6> GPIO Clock Enable
-// <o11.7> CT16B0 Clock Enable
-// <o11.8> CT16B1 Clock Enable
-// <o11.9> CT32B0 Clock Enable
-// <o11.10> CT32B1 Clock Enable
-// <o11.11> SSP0 Clock Enable
-// <o11.12> UART Clock Enable
-// <o11.13> ADC Clock Enable
-// <o11.15> WDT Clock Enable
-// <o11.16> IOCON Clock Enable
-// <o11.18> SSP1 Clock Enable
-//
-// <o12.0..7> SSP0 Clock Divider <0-255>
-// <i> 0 = is disabled
-// <o13.0..7> UART Clock Divider <0-255>
-// <i> 0 = is disabled
-// <o14.0..7> SSP1 Clock Divider <0-255>
-// <i> 0 = is disabled
-// </e>
-*/
-#define CLOCK_SETUP 1
-#define SYSCLK_SETUP 1
-#define SYSOSC_SETUP 1
-#define SYSOSCCTRL_Val 0x00000000
-#define WDTOSC_SETUP 0
-#define WDTOSCCTRL_Val 0x000000A0
-#define SYSPLLCLKSEL_Val 0x00000001
-#define SYSPLL_SETUP 1
-#define SYSPLLCTRL_Val 0x00000023
-#define MAINCLKSEL_Val 0x00000003
-#define SYSAHBCLKDIV_Val 0x00000001
-#define AHBCLKCTRL_Val 0x0001005F
-#define SSP0CLKDIV_Val 0x00000001
-#define UARTCLKDIV_Val 0x00000001
-#define SSP1CLKDIV_Val 0x00000001
-
-/*--------------------- Memory Mapping Configuration -------------------------
-//
-// <e> Memory Mapping
-// <o1.0..1> System Memory Remap (Register: SYSMEMREMAP)
-// <0=> Bootloader mapped to address 0
-// <1=> RAM mapped to address 0
-// <2=> Flash mapped to address 0
-// <3=> Flash mapped to address 0
-// </e>
-*/
-#define MEMMAP_SETUP 0
-#define SYSMEMREMAP_Val 0x00000001
-
-/*
-//-------- <<< end of configuration section >>> ------------------------------
-*/
-
-/*----------------------------------------------------------------------------
- Check the register settings
- *----------------------------------------------------------------------------*/
-#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
-#define CHECK_RSVD(val, mask) (val & mask)
-
-/* Clock Configuration -------------------------------------------------------*/
-#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
- #error "SYSOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
- #error "WDTOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
- #error "SYSPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
- #error "SYSPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
- #error "MAINCLKSEL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
- #error "SYSAHBCLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((AHBCLKCTRL_Val), ~0x0001FFFF))
- #error "AHBCLKCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SSP0CLKDIV_Val), 0, 255))
- #error "SSP0CLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((UARTCLKDIV_Val), 0, 255))
- #error "UARTCLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((SSP1CLKDIV_Val), 0, 255))
- #error "SSP1CLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((SYSMEMREMAP_Val), ~0x00000003))
- #error "SYSMEMREMAP: Invalid values of reserved bits!"
-#endif
-
-
-/*----------------------------------------------------------------------------
- DEFINES
- *----------------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------------
- Define clocks
- *----------------------------------------------------------------------------*/
-#define __XTAL (12000000UL) /* Oscillator frequency */
-#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
-#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
-
-
-#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
-#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
-
-#if (CLOCK_SETUP) /* Clock Setup */
- #if (SYSCLK_SETUP) /* System Clock Setup */
- #if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
- #if (__FREQSEL == 0)
- #define __WDT_OSC_CLK ( 400000 / __DIVSEL)
- #elif (__FREQSEL == 1)
- #define __WDT_OSC_CLK ( 500000 / __DIVSEL)
- #elif (__FREQSEL == 2)
- #define __WDT_OSC_CLK ( 800000 / __DIVSEL)
- #elif (__FREQSEL == 3)
- #define __WDT_OSC_CLK (1100000 / __DIVSEL)
- #elif (__FREQSEL == 4)
- #define __WDT_OSC_CLK (1400000 / __DIVSEL)
- #elif (__FREQSEL == 5)
- #define __WDT_OSC_CLK (1600000 / __DIVSEL)
- #elif (__FREQSEL == 6)
- #define __WDT_OSC_CLK (1800000 / __DIVSEL)
- #elif (__FREQSEL == 7)
- #define __WDT_OSC_CLK (2000000 / __DIVSEL)
- #elif (__FREQSEL == 8)
- #define __WDT_OSC_CLK (2200000 / __DIVSEL)
- #elif (__FREQSEL == 9)
- #define __WDT_OSC_CLK (2400000 / __DIVSEL)
- #elif (__FREQSEL == 10)
- #define __WDT_OSC_CLK (2600000 / __DIVSEL)
- #elif (__FREQSEL == 11)
- #define __WDT_OSC_CLK (2700000 / __DIVSEL)
- #elif (__FREQSEL == 12)
- #define __WDT_OSC_CLK (2900000 / __DIVSEL)
- #elif (__FREQSEL == 13)
- #define __WDT_OSC_CLK (3100000 / __DIVSEL)
- #elif (__FREQSEL == 14)
- #define __WDT_OSC_CLK (3200000 / __DIVSEL)
- #else
- #define __WDT_OSC_CLK (3400000 / __DIVSEL)
- #endif
- #else
- #define __WDT_OSC_CLK (1600000 / 2)
- #endif // WDTOSC_SETUP
-
- /* sys_pllclkin calculation */
- #if ((SYSPLLCLKSEL_Val & 0x03) == 0)
- #define __SYS_PLLCLKIN (__IRC_OSC_CLK)
- #elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
- #define __SYS_PLLCLKIN (__SYS_OSC_CLK)
- #elif ((SYSPLLCLKSEL_Val & 0x03) == 2)
- #define __SYS_PLLCLKIN (__WDT_OSC_CLK)
- #else
- #define __SYS_PLLCLKIN (0)
- #endif
-
- #if (SYSPLL_SETUP) /* System PLL Setup */
- #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
- #else
- #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * (1))
- #endif // SYSPLL_SETUP
-
- /* main clock calculation */
- #if ((MAINCLKSEL_Val & 0x03) == 0)
- #define __MAIN_CLOCK (__IRC_OSC_CLK)
- #elif ((MAINCLKSEL_Val & 0x03) == 1)
- #define __MAIN_CLOCK (__SYS_PLLCLKIN)
- #elif ((MAINCLKSEL_Val & 0x03) == 2)
- #define __MAIN_CLOCK (__WDT_OSC_CLK)
- #elif ((MAINCLKSEL_Val & 0x03) == 3)
- #define __MAIN_CLOCK (__SYS_PLLCLKOUT)
- #else
- #define __MAIN_CLOCK (0)
- #endif
-
- #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
-
- #else // SYSCLK_SETUP
- #if (SYSAHBCLKDIV_Val == 0)
- #define __SYSTEM_CLOCK (0)
- #else
- #define __SYSTEM_CLOCK (__XTAL / SYSAHBCLKDIV_Val)
- #endif
- #endif // SYSCLK_SETUP
-
-#else
- #define __SYSTEM_CLOCK (__XTAL)
-#endif // CLOCK_SETUP
-
-
-/*----------------------------------------------------------------------------
- Clock Variable definitions
- *----------------------------------------------------------------------------*/
-uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
-
-
-/*----------------------------------------------------------------------------
- Clock functions
- *----------------------------------------------------------------------------*/
-void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
-{
- uint32_t wdt_osc = 0;
-
- /* Determine clock frequency according to clock register values */
- switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
- case 0: wdt_osc = 400000; break;
- case 1: wdt_osc = 500000; break;
- case 2: wdt_osc = 800000; break;
- case 3: wdt_osc = 1100000; break;
- case 4: wdt_osc = 1400000; break;
- case 5: wdt_osc = 1600000; break;
- case 6: wdt_osc = 1800000; break;
- case 7: wdt_osc = 2000000; break;
- case 8: wdt_osc = 2200000; break;
- case 9: wdt_osc = 2400000; break;
- case 10: wdt_osc = 2600000; break;
- case 11: wdt_osc = 2700000; break;
- case 12: wdt_osc = 2900000; break;
- case 13: wdt_osc = 3100000; break;
- case 14: wdt_osc = 3200000; break;
- case 15: wdt_osc = 3400000; break;
- }
- wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
-
- switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* Input Clock to System PLL */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* System oscillator */
- SystemCoreClock = __SYS_OSC_CLK;
- break;
- case 2: /* WDT Oscillator */
- SystemCoreClock = wdt_osc;
- break;
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- case 2: /* WDT Oscillator */
- SystemCoreClock = wdt_osc;
- break;
- case 3: /* System PLL Clock Out */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __IRC_OSC_CLK;
- } else {
- SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 1: /* System oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __SYS_OSC_CLK;
- } else {
- SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 2: /* WDT Oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = wdt_osc;
- } else {
- SystemCoreClock = wdt_osc * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- }
-
- SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
-
-}
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System.
- */
-void SystemInit (void)
-{
-#if (CLOCK_SETUP) /* Clock Setup */
-#if (SYSCLK_SETUP) /* System Clock Setup */
-#if (SYSOSC_SETUP) /* System Oscillator Setup */
- uint32_t i;
-
- LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
- LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
- for (i = 0; i < 200; i++) __NOP();
- LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
- LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */
- LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->SYSPLLCLKUEN = 0x01;
- while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */
-#if (SYSPLL_SETUP) /* System PLL Setup */
- LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
- while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
-#endif
-#endif
-#if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/
- LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
-#endif
- LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
- LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */
- LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */
- LPC_SYSCON->MAINCLKUEN = 0x01;
- while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */
-#endif
-
- LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
- LPC_SYSCON->SYSAHBCLKCTRL = AHBCLKCTRL_Val;
- LPC_SYSCON->SSP0CLKDIV = SSP0CLKDIV_Val;
- LPC_SYSCON->UARTCLKDIV = UARTCLKDIV_Val;
- LPC_SYSCON->SSP1CLKDIV = SSP1CLKDIV_Val;
-#endif
-
-
-#if (MEMMAP_SETUP || MEMMAP_INIT) /* Memory Mapping Setup */
- LPC_SYSCON->SYSMEMREMAP = SYSMEMREMAP_Val;
-#endif
-}
diff --git a/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h b/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h
deleted file mode 100644
index 385fe3888d..0000000000
--- a/libcpu/arm/lpc1100/CMSIS/system_LPC11xx.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/**************************************************************************//**
- * @file system_LPC11xx.h
- * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File
- * for the NXP LPC11xx Device Series
- * @version V1.00
- * @date 17. November 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#ifndef __SYSTEM_LPC11xx_H
-#define __SYSTEM_LPC11xx_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdint.h>
-
-extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
-
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System and update the SystemCoreClock variable.
- */
-extern void SystemInit (void);
-
-/**
- * Update SystemCoreClock variable
- *
- * @param none
- * @return none
- *
- * @brief Updates the SystemCoreClock with current core Clock
- * retrieved from cpu registers.
- */
-extern void SystemCoreClockUpdate (void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SYSTEM_LPC11x_H */
diff --git a/libcpu/arm/lpc1100/context_rvds.S b/libcpu/arm/lpc1100/context_rvds.S
deleted file mode 100644
index 097f43bf85..0000000000
--- a/libcpu/arm/lpc1100/context_rvds.S
+++ /dev/null
@@ -1,175 +0,0 @@
-;/*
-; * File : context_rvds.S
-; * This file is part of RT-Thread RTOS
-; * COPYRIGHT (C) 2009, RT-Thread Development Team
-; *
-; * The license and distribution terms for this file may be
-; * found in the file LICENSE in this distribution or at
-; * http://www.rt-thread.org/license/LICENSE
-; *
-; * Change Logs:
-; * Date Author Notes
-; * 2010-01-25 Bernard first version
-; */
-
-;/**
-; * @addtogroup LPC1100
-; */
-;/*@{*/
-
-NVIC_INT_CTRL EQU 0xE000ED04 ; interrupt control state register
-NVIC_SYSPRI2 EQU 0xE000ED20 ; system priority register (2)
-NVIC_PENDSV_PRI EQU 0x00FF0000 ; PendSV priority value (lowest)
-NVIC_PENDSVSET EQU 0x10000000 ; value to trigger PendSV exception
-
- AREA |.text|, CODE, READONLY, ALIGN=2
- THUMB
- REQUIRE8
- PRESERVE8
-
- IMPORT rt_thread_switch_interrupt_flag
- IMPORT rt_interrupt_from_thread
- IMPORT rt_interrupt_to_thread
-
-;/*
-; * rt_base_t rt_hw_interrupt_disable();
-; */
-rt_hw_interrupt_disable PROC
- EXPORT rt_hw_interrupt_disable
- MRS r0, PRIMASK
- CPSID I
- BX LR
- ENDP
-
-;/*
-; * void rt_hw_interrupt_enable(rt_base_t level);
-; */
-rt_hw_interrupt_enable PROC
- EXPORT rt_hw_interrupt_enable
- MSR PRIMASK, r0
- BX LR
- ENDP
-
-;/*
-; * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
-; * r0 --> from
-; * r1 --> to
-; */
-rt_hw_context_switch_interrupt
- EXPORT rt_hw_context_switch_interrupt
-rt_hw_context_switch PROC
- EXPORT rt_hw_context_switch
-
- ; set rt_thread_switch_interrupt_flag to 1
- LDR r2, =rt_thread_switch_interrupt_flag
- LDR r3, [r2]
- CMP r3, #1
- BEQ _reswitch
- MOVS r3, #0x1
- STR r3, [r2]
-
- LDR r2, =rt_interrupt_from_thread ; set rt_interrupt_from_thread
- STR r0, [r2]
-
-_reswitch
- LDR r2, =rt_interrupt_to_thread ; set rt_interrupt_to_thread
- STR r1, [r2]
-
- LDR r0, =NVIC_INT_CTRL ; trigger the PendSV exception (causes context switch)
- LDR r1, =NVIC_PENDSVSET
- STR r1, [r0]
- BX LR
- ENDP
-
-; r0 --> swith from thread stack
-; r1 --> swith to thread stack
-; psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack
-rt_hw_pend_sv PROC
- EXPORT rt_hw_pend_sv
-
- ; disable interrupt to protect context switch
- MRS r2, PRIMASK
- CPSID I
-
- ; get rt_thread_switch_interrupt_flag
- LDR r0, =rt_thread_switch_interrupt_flag
- LDR r1, [r0]
- CMP r1, #0x00
- BEQ pendsv_exit ; pendsv already handled
-
- ; clear rt_thread_switch_interrupt_flag to 0
- MOVS r1, #0x00
- STR r1, [r0]
-
- LDR r0, =rt_interrupt_from_thread
- LDR r1, [r0]
- CMP r1, #0x00
- BEQ swtich_to_thread ; skip register save at the first time
-
- MRS r1, psp ; get from thread stack pointer
- SUBS r1, r1, #0x10
- LDR r0, [r0]
- STR r1, [r0] ; update from thread stack pointer
- STMIA r1!, {r4 - r7} ; push r4 - r7 register
-
-swtich_to_thread
- LDR r1, =rt_interrupt_to_thread
- LDR r1, [r1]
- LDR r1, [r1] ; load thread stack pointer
-
- LDMIA r1!, {r4 - r7} ; pop r4 - r7 register
- MSR psp, r1 ; update stack pointer
-
-pendsv_exit
- ; restore interrupt
- MSR PRIMASK, r2
-
- MOVS r0, #0x04
- RSBS r0, #0
- BX r0
- ENDP
-
-;/*
-; * void rt_hw_context_switch_to(rt_uint32 to);
-; * r0 --> to
-; * this fucntion is used to perform the first thread switch
-; */
-rt_hw_context_switch_to PROC
- EXPORT rt_hw_context_switch_to
- ; set to thread
- LDR r1, =rt_interrupt_to_thread
- STR r0, [r1]
-
- ; set from thread to 0
- LDR r1, =rt_interrupt_from_thread
- MOVS r0, #0x0
- STR r0, [r1]
-
- ; set interrupt flag to 1
- LDR r1, =rt_thread_switch_interrupt_flag
- MOVS r0, #1
- STR r0, [r1]
-
- ; set the PendSV exception priority
- ; LDR r0, =NVIC_SYSPRI2
- ; LDR r1, =NVIC_PENDSV_PRI
- ; STR r1, [r0]
-
- ; trigger the PendSV exception (causes context switch)
- LDR r0, =NVIC_INT_CTRL
- LDR r1, =NVIC_PENDSVSET
- STR r1, [r0]
-
- ; enable interrupts at processor level
- CPSIE I
-
- ; never reach here!
- ENDP
-
-; compatible with old version
-rt_hw_interrupt_thread_switch PROC
- EXPORT rt_hw_interrupt_thread_switch
- BX lr
- ENDP
-
- END
diff --git a/libcpu/arm/lpc1100/cpu.c b/libcpu/arm/lpc1100/cpu.c
deleted file mode 100644
index 7efd166a3f..0000000000
--- a/libcpu/arm/lpc1100/cpu.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * File : cpu.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2009, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date Author Notes
- * 2010-01-25 Bernard first version
- */
-
-#include <rtthread.h>
-
-/**
- * @addtogroup LPC1100
- */
-/*@{*/
-
-/**
- * reset cpu by dog's time-out
- *
- */
-void rt_hw_cpu_reset()
-{
- /*NOTREACHED*/
-}
-
-/**
- * shutdown CPU
- *
- */
-void rt_hw_cpu_shutdown()
-{
- rt_kprintf("shutdown...\n");
-
- RT_ASSERT(0);
-}
-
-/*@}*/
diff --git a/libcpu/arm/lpc1100/fault.c b/libcpu/arm/lpc1100/fault.c
deleted file mode 100644
index d1fe68eefc..0000000000
--- a/libcpu/arm/lpc1100/fault.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * File : fault.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2009, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date Author Notes
- * 2010-01-25 Bernard first version
- */
-#include <rtthread.h>
-
-struct stack_contex
-{
- rt_uint32_t r0;
- rt_uint32_t r1;
- rt_uint32_t r2;
- rt_uint32_t r3;
- rt_uint32_t r12;
- rt_uint32_t lr;
- rt_uint32_t pc;
- rt_uint32_t psr;
-};
-
-extern void rt_hw_interrupt_thread_switch(void);
-extern long list_thread(void);
-extern rt_thread_t rt_current_thread;
-void rt_hw_hard_fault_exception(struct stack_contex* contex)
-{
- rt_kprintf("psr: 0x%08x\n", contex->psr);
- rt_kprintf(" pc: 0x%08x\n", contex->pc);
- rt_kprintf(" lr: 0x%08x\n", contex->lr);
- rt_kprintf("r12: 0x%08x\n", contex->r12);
- rt_kprintf("r03: 0x%08x\n", contex->r3);
- rt_kprintf("r02: 0x%08x\n", contex->r2);
- rt_kprintf("r01: 0x%08x\n", contex->r1);
- rt_kprintf("r00: 0x%08x\n", contex->r0);
-
- rt_kprintf("hard fault on thread: %s\n", rt_current_thread->name);
-#ifdef RT_USING_FINSH
- list_thread();
-#endif
- while (1);
-}
diff --git a/libcpu/arm/lpc1100/fault_rvds.S b/libcpu/arm/lpc1100/fault_rvds.S
deleted file mode 100644
index 4029306400..0000000000
--- a/libcpu/arm/lpc1100/fault_rvds.S
+++ /dev/null
@@ -1,32 +0,0 @@
-;/*
-; * File : fault_rvds.S
-; * This file is part of RT-Thread RTOS
-; * COPYRIGHT (C) 2006, RT-Thread Development Team
-; *
-; * The license and distribution terms for this file may be
-; * found in the file LICENSE in this distribution or at
-; * http://www.rt-thread.org/license/LICENSE
-; *
-; * Change Logs:
-; * Date Author Notes
-; * 2010-01-25 Bernard first version
-; */
-
- AREA |.text|, CODE, READONLY, ALIGN=2
- THUMB
- REQUIRE8
- PRESERVE8
-
- IMPORT rt_hw_hard_fault_exception
-
-rt_hw_hard_fault PROC
- EXPORT rt_hw_hard_fault
-
- ; get current context
- MRS r0, psp ; get fault thread stack pointer
- PUSH {lr}
- BL rt_hw_hard_fault_exception
- POP {pc}
- ENDP
-
- END
diff --git a/libcpu/arm/lpc1100/interrupt.c b/libcpu/arm/lpc1100/interrupt.c
deleted file mode 100644
index ce43a7781a..0000000000
--- a/libcpu/arm/lpc1100/interrupt.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * File : interrupt.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2009, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date Author Notes
- * 2010-01-25 Bernard first version
- */
-
-#include <rtthread.h>
-
-/* exception and interrupt handler table */
-rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread;
-rt_uint8_t rt_thread_switch_interrupt_flag;
-
-/*@}*/
diff --git a/libcpu/arm/lpc1100/stack.c b/libcpu/arm/lpc1100/stack.c
deleted file mode 100644
index 6bfa26b08a..0000000000
--- a/libcpu/arm/lpc1100/stack.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * File : stack.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2009, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date Author Notes
- * 2010-01-25 Bernard first version
- */
-#include <rtthread.h>
-
-/**
- * @addtogroup LPC1100
- */
-/*@{*/
-
-/**
- * This function will initialize thread stack
- *
- * @param tentry the entry of thread
- * @param parameter the parameter of entry
- * @param stack_addr the beginning stack address
- * @param texit the function will be called when thread exit
- *
- * @return stack address
- */
-rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter,
- rt_uint8_t *stack_addr, void *texit)
-{
- unsigned long *stk;
-
- stk = (unsigned long *)stack_addr;
- *(stk) = 0x01000000L; /* PSR */
- *(--stk) = (unsigned long)tentry; /* entry point, pc */
- *(--stk) = (unsigned long)texit; /* lr */
- *(--stk) = 0; /* r12 */
- *(--stk) = 0; /* r3 */
- *(--stk) = 0; /* r2 */
- *(--stk) = 0; /* r1 */
- *(--stk) = (unsigned long)parameter; /* r0 : argument */
- *(--stk) = 0; /* r7 */
- *(--stk) = 0; /* r6 */
- *(--stk) = 0; /* r5 */
- *(--stk) = 0; /* r4 */
-
- /* return task's current stack address */
- return (rt_uint8_t *)stk;
-}
-
-/*@}*/
diff --git a/libcpu/arm/lpc1100/start_rvds.S b/libcpu/arm/lpc1100/start_rvds.S
deleted file mode 100644
index c0f4ef6bc2..0000000000
--- a/libcpu/arm/lpc1100/start_rvds.S
+++ /dev/null
@@ -1,252 +0,0 @@
-;/*****************************************************************************
-; * @file: startup_LPC11xx.s
-; * @purpose: CMSIS Cortex-M0 Core Device Startup File
-; * for the NXP LPC11xx Device Series
-; * @version: V1.0
-; * @date: 25. Nov. 2008
-; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------
-; *
-; * Copyright (C) 2008 ARM Limited. All rights reserved.
-; * ARM Limited (ARM) is supplying this software for use with Cortex-M0
-; * processor based microcontrollers. This file can be freely distributed
-; * within development tools that are supporting such ARM based processors.
-; *
-; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
-; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
-; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
-; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
-; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
-; *
-; *****************************************************************************/
-
-
-; <h> Stack Configuration
-; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
-; </h>
-
-Stack_Size EQU 0x00000100
-
- AREA STACK, NOINIT, READWRITE, ALIGN=3
-Stack_Mem SPACE Stack_Size
-__initial_sp
-
-
-; <h> Heap Configuration
-; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
-; </h>
-
-Heap_Size EQU 0x00000000
-
- AREA HEAP, NOINIT, READWRITE, ALIGN=3
-__heap_base
-Heap_Mem SPACE Heap_Size
-__heap_limit
-
-
- PRESERVE8
- THUMB
-
- IMPORT rt_hw_hard_fault
- IMPORT rt_hw_pend_sv
- IMPORT rt_hw_timer_handler
-
-; Vector Table Mapped to Address 0 at Reset
-
- AREA RESET, DATA, READONLY
- EXPORT __Vectors
-
-__Vectors DCD __initial_sp ; Top of Stack
- DCD Reset_Handler ; Reset Handler
- DCD NMI_Handler ; NMI Handler
- DCD rt_hw_hard_fault ; Hard Fault Handler
- DCD MemManage_Handler ; MPU Fault Handler
- DCD BusFault_Handler ; Bus Fault Handler
- DCD UsageFault_Handler ; Usage Fault Handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD SVC_Handler ; SVCall Handler
- DCD DebugMon_Handler ; Debug Monitor Handler
- DCD 0 ; Reserved
- DCD rt_hw_pend_sv ; PendSV Handler
- DCD rt_hw_timer_handler ; SysTick Handler
-
- ; External Interrupts
- DCD WAKEUP_IRQHandler ; 15 wakeup sources for all the
- DCD WAKEUP_IRQHandler ; I/O pins starting from PIO0 (0:11)
- DCD WAKEUP_IRQHandler ; all 40 are routed to the same ISR
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler
- DCD WAKEUP_IRQHandler ; PIO1 (0:11)
- DCD CAN_IRQHandler ; CAN
- DCD SSP1_IRQHandler ; SSP1
- DCD I2C_IRQHandler ; I2C
- DCD TIMER16_0_IRQHandler ; 16-bit Timer0
- DCD TIMER16_1_IRQHandler ; 16-bit Timer1
- DCD TIMER32_0_IRQHandler ; 32-bit Timer0
- DCD TIMER32_1_IRQHandler ; 32-bit Timer1
- DCD SSP0_IRQHandler ; SSP0
- DCD UART_IRQHandler ; UART
- DCD USB_IRQHandler ; USB IRQ
- DCD USB_FIQHandler ; USB FIQ
- DCD ADC_IRQHandler ; A/D Converter
- DCD WDT_IRQHandler ; Watchdog timer
- DCD BOD_IRQHandler ; Brown Out Detect
- DCD FMC_IRQHandler ; IP2111 Flash Memory Controller
- DCD PIOINT3_IRQHandler ; PIO INT3
- DCD PIOINT2_IRQHandler ; PIO INT2
- DCD PIOINT1_IRQHandler ; PIO INT1
- DCD PIOINT0_IRQHandler ; PIO INT0
-
-
- IF :LNOT::DEF:NO_CRP
- AREA |.ARM.__at_0x02FC|, CODE, READONLY
-CRP_Key DCD 0xFFFFFFFF
- ENDIF
-
-
- AREA |.text|, CODE, READONLY
-
-
-; Reset Handler
-
-Reset_Handler PROC
- EXPORT Reset_Handler [WEAK]
- IMPORT __main
- LDR R0, =__main
- BX R0
- ENDP
-
-
-; Dummy Exception Handlers (infinite loops which can be modified)
-
-NMI_Handler PROC
- EXPORT NMI_Handler [WEAK]
- B .
- ENDP
-HardFault_Handler\
- PROC
- EXPORT HardFault_Handler [WEAK]
- B .
- ENDP
-MemManage_Handler\
- PROC
- EXPORT MemManage_Handler [WEAK]
- B .
- ENDP
-BusFault_Handler\
- PROC
- EXPORT BusFault_Handler [WEAK]
- B .
- ENDP
-UsageFault_Handler\
- PROC
- EXPORT UsageFault_Handler [WEAK]
- B .
- ENDP
-SVC_Handler PROC
- EXPORT SVC_Handler [WEAK]
- B .
- ENDP
-DebugMon_Handler\
- PROC
- EXPORT DebugMon_Handler [WEAK]
- B .
- ENDP
-PendSV_Handler PROC
- EXPORT PendSV_Handler [WEAK]
- B .
- ENDP
-SysTick_Handler PROC
- EXPORT SysTick_Handler [WEAK]
- B .
- ENDP
-
-Default_Handler PROC
-
- EXPORT WAKEUP_IRQHandler [WEAK]
- EXPORT CAN_IRQHandler [WEAK]
- EXPORT SSP1_IRQHandler [WEAK]
- EXPORT I2C_IRQHandler [WEAK]
- EXPORT TIMER16_0_IRQHandler [WEAK]
- EXPORT TIMER16_1_IRQHandler [WEAK]
- EXPORT TIMER32_0_IRQHandler [WEAK]
- EXPORT TIMER32_1_IRQHandler [WEAK]
- EXPORT SSP0_IRQHandler [WEAK]
- EXPORT UART_IRQHandler [WEAK]
-
- EXPORT USB_IRQHandler [WEAK]
- EXPORT USB_FIQHandler [WEAK]
- EXPORT ADC_IRQHandler [WEAK]
- EXPORT WDT_IRQHandler [WEAK]
- EXPORT BOD_IRQHandler [WEAK]
- EXPORT FMC_IRQHandler [WEAK]
- EXPORT PIOINT3_IRQHandler [WEAK]
- EXPORT PIOINT2_IRQHandler [WEAK]
- EXPORT PIOINT1_IRQHandler [WEAK]
- EXPORT PIOINT0_IRQHandler [WEAK]
-
-
-WAKEUP_IRQHandler
-CAN_IRQHandler
-SSP1_IRQHandler
-I2C_IRQHandler
-TIMER16_0_IRQHandler
-TIMER16_1_IRQHandler
-TIMER32_0_IRQHandler
-TIMER32_1_IRQHandler
-SSP0_IRQHandler
-UART_IRQHandler
-USB_IRQHandler
-USB_FIQHandler
-ADC_IRQHandler
-WDT_IRQHandler
-BOD_IRQHandler
-FMC_IRQHandler
-PIOINT3_IRQHandler
-PIOINT2_IRQHandler
-PIOINT1_IRQHandler
-PIOINT0_IRQHandler
-
- B .
-
- ENDP
-
-
- ALIGN
-
-
-; User Initial Stack & Heap
-
- IF :DEF:__MICROLIB
-
- EXPORT __initial_sp
- EXPORT __heap_base
- EXPORT __heap_limit
-
- ELSE
-
- IMPORT __use_two_region_memory
- EXPORT __user_initial_stackheap
-__user_initial_stackheap
-
- LDR R0, = Heap_Mem
- LDR R1, =(Stack_Mem + Stack_Size)
- LDR R2, = (Heap_Mem + Heap_Size)
- LDR R3, = Stack_Mem
- BX LR
-
- ALIGN
-
- ENDIF
-
-
- END
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-30 17:58:04 +0000