diff options
48 files changed, 396 insertions, 377 deletions
diff --git a/bsp/stm32/libraries/templates/stm32f0xx/.config b/bsp/stm32/libraries/templates/stm32f0xx/.config index 28eea196b2..95ba89c2b8 100644 --- a/bsp/stm32/libraries/templates/stm32f0xx/.config +++ b/bsp/stm32/libraries/templates/stm32f0xx/.config @@ -281,6 +281,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_LITTLEVGL2RTT is not set # CONFIG_PKG_USING_CMSIS is not set # CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set # # peripheral libraries and drivers @@ -295,6 +296,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -309,10 +311,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,30 +320,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set - -# -# Privated Packages of RealThread -# -# CONFIG_PKG_USING_CODEC is not set -# CONFIG_PKG_USING_PLAYER is not set -# CONFIG_PKG_USING_PERSIMMON_SRC is not set - -# -# Network Utilities -# -# CONFIG_PKG_USING_WICED is not set -# CONFIG_PKG_USING_CLOUDSDK is not set -# CONFIG_PKG_USING_COREMARK is not set -# CONFIG_PKG_USING_POWER_MANAGER is not set -# CONFIG_PKG_USING_RT_OTA is not set -# CONFIG_PKG_USING_RDBD_SRC is not set -# CONFIG_PKG_USING_RTINSIGHT is not set -# CONFIG_PKG_USING_SMARTCONFIG is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F0=y @@ -361,9 +338,10 @@ CONFIG_SOC_STM32F091RC=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # diff --git a/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig index 766529e3a3..2af0bda763 100644 --- a/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig +++ b/bsp/stm32/libraries/templates/stm32f0xx/board/Kconfig @@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers" select RT_USING_PIN default y - config BSP_USING_UART1 - bool "Enable UART1" - select RT_USING_SERIAL + menuconfig BSP_USING_UART + bool "Enable UART" default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - select RT_USING_SPI - default n - - config BSP_SPI_USING_DMA - bool "Enable SPI DMA support" + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + endif menuconfig BSP_USING_I2C1 bool "Enable I2C1 BUS (software simulation)" diff --git a/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h index bb37c4d3a2..0026ccb4a8 100644 --- a/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h +++ b/bsp/stm32/libraries/templates/stm32f0xx/rtconfig.h @@ -149,19 +149,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - - -/* Privated Packages of RealThread */ - - -/* Network Utilities */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32F0 @@ -174,6 +163,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/libraries/templates/stm32f10x/.config b/bsp/stm32/libraries/templates/stm32f10x/.config index b74dd34859..4d9fc24b34 100644 --- a/bsp/stm32/libraries/templates/stm32f10x/.config +++ b/bsp/stm32/libraries/templates/stm32f10x/.config @@ -296,6 +296,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -310,10 +311,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -322,11 +320,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F1=y @@ -343,9 +338,10 @@ CONFIG_SOC_STM32F103RB=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # diff --git a/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig b/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig index 39a000d371..a8a2e516f2 100644 --- a/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig +++ b/bsp/stm32/libraries/templates/stm32f10x/board/Kconfig @@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers" select RT_USING_PIN default y - config BSP_USING_UART1 - bool "Enable UART1" - select RT_USING_SERIAL + menuconfig BSP_USING_UART + bool "Enable UART" default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - select RT_USING_SPI - default n - - config BSP_SPI_USING_DMA - bool "Enable SPI DMA support" + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + endif menuconfig BSP_USING_I2C1 bool "Enable I2C1 BUS (software simulation)" diff --git a/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h b/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h index 908c0d760d..63450a8a21 100644 --- a/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h +++ b/bsp/stm32/libraries/templates/stm32f10x/rtconfig.h @@ -149,13 +149,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32F1 @@ -168,6 +163,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/libraries/templates/stm32f4xx/.config b/bsp/stm32/libraries/templates/stm32f4xx/.config index ed06540dab..973b093b5b 100644 --- a/bsp/stm32/libraries/templates/stm32f4xx/.config +++ b/bsp/stm32/libraries/templates/stm32f4xx/.config @@ -297,6 +297,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -311,10 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -323,11 +321,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -344,9 +339,10 @@ CONFIG_SOC_STM32F407ZG=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # diff --git a/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig index 5ba6059541..a04f418b5b 100644 --- a/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig +++ b/bsp/stm32/libraries/templates/stm32f4xx/board/Kconfig @@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers" select RT_USING_PIN default y - config BSP_USING_UART1 - bool "Enable UART1" - select RT_USING_SERIAL + menuconfig BSP_USING_UART + bool "Enable UART" default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - select RT_USING_SPI - default n - - config BSP_SPI_USING_DMA - bool "Enable SPI DMA support" + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + endif menuconfig BSP_USING_I2C1 bool "Enable I2C1 BUS (software simulation)" diff --git a/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h index b8700de08d..8e6b709a8a 100644 --- a/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h +++ b/bsp/stm32/libraries/templates/stm32f4xx/rtconfig.h @@ -149,13 +149,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32F4 @@ -168,6 +163,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/libraries/templates/stm32f7xx/.config b/bsp/stm32/libraries/templates/stm32f7xx/.config index 5b2fbd74ae..a594f088db 100644 --- a/bsp/stm32/libraries/templates/stm32f7xx/.config +++ b/bsp/stm32/libraries/templates/stm32f7xx/.config @@ -297,6 +297,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -311,10 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -323,11 +321,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F7=y @@ -344,9 +339,10 @@ CONFIG_SOC_STM32F767IG=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # diff --git a/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig index 02454235c7..bfd687cbc1 100644 --- a/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig +++ b/bsp/stm32/libraries/templates/stm32f7xx/board/Kconfig @@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers" select RT_USING_PIN default y - config BSP_USING_UART1 - bool "Enable UART1" - select RT_USING_SERIAL + menuconfig BSP_USING_UART + bool "Enable UART" default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - select RT_USING_SPI - default n - - config BSP_SPI_USING_DMA - bool "Enable SPI DMA support" + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + endif menuconfig BSP_USING_I2C1 bool "Enable I2C1 BUS (software simulation)" diff --git a/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h index f1dff62d4b..50eb442ed8 100644 --- a/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h +++ b/bsp/stm32/libraries/templates/stm32f7xx/rtconfig.h @@ -149,13 +149,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32F7 @@ -168,6 +163,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/libraries/templates/stm32l4xx/.config b/bsp/stm32/libraries/templates/stm32l4xx/.config index 2ace5a3beb..e29aecd0c8 100644 --- a/bsp/stm32/libraries/templates/stm32l4xx/.config +++ b/bsp/stm32/libraries/templates/stm32l4xx/.config @@ -297,6 +297,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -311,10 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -323,11 +321,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32L4=y @@ -344,9 +339,10 @@ CONFIG_SOC_STM32L475VE=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # diff --git a/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig b/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig index 5d0299fe3b..a06a967059 100644 --- a/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig +++ b/bsp/stm32/libraries/templates/stm32l4xx/board/Kconfig @@ -16,19 +16,41 @@ menu "On-chip Peripheral Drivers" select RT_USING_PIN default y - config BSP_USING_UART1 - bool "Enable UART1" - select RT_USING_SERIAL + menuconfig BSP_USING_UART + bool "Enable UART" default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - select RT_USING_SPI - default n + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + endif - config BSP_SPI_USING_DMA - bool "Enable SPI DMA support" + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + endif menuconfig BSP_USING_I2C1 bool "Enable I2C1 BUS (software simulation)" diff --git a/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h b/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h index 512a1832ce..6ae4a7ba8a 100644 --- a/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h +++ b/bsp/stm32/libraries/templates/stm32l4xx/rtconfig.h @@ -149,13 +149,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32L4 @@ -168,6 +163,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f091-st-nucleo/.config b/bsp/stm32/stm32f091-st-nucleo/.config index 3a0dbd8dc3..0fced6c38b 100644 --- a/bsp/stm32/stm32f091-st-nucleo/.config +++ b/bsp/stm32/stm32f091-st-nucleo/.config @@ -281,6 +281,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_LITTLEVGL2RTT is not set # CONFIG_PKG_USING_CMSIS is not set # CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set # # peripheral libraries and drivers @@ -295,6 +296,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -309,10 +311,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,30 +320,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set - -# -# Privated Packages of RealThread -# -# CONFIG_PKG_USING_CODEC is not set -# CONFIG_PKG_USING_PLAYER is not set -# CONFIG_PKG_USING_PERSIMMON_SRC is not set - -# -# Network Utilities -# -# CONFIG_PKG_USING_WICED is not set -# CONFIG_PKG_USING_CLOUDSDK is not set -# CONFIG_PKG_USING_COREMARK is not set -# CONFIG_PKG_USING_POWER_MANAGER is not set -# CONFIG_PKG_USING_RT_OTA is not set -# CONFIG_PKG_USING_RDBD_SRC is not set -# CONFIG_PKG_USING_RTINSIGHT is not set -# CONFIG_PKG_USING_SMARTCONFIG is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F0=y @@ -356,16 +333,24 @@ CONFIG_SOC_STM32F091RC=y # # Onboard Peripheral Drivers # +CONFIG_BSP_USING_USB_TO_USART=y # # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y # CONFIG_BSP_USING_UART1 is not set CONFIG_BSP_USING_UART2=y -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART2_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set +# CONFIG_BSP_USING_TIM is not set +# CONFIG_BSP_USING_PWM is not set +# CONFIG_BSP_USING_ADC is not set +# CONFIG_BSP_USING_ON_CHIP_FLASH is not set +# CONFIG_BSP_USING_ONCHIP_RTC is not set +# CONFIG_BSP_USING_WDT is not set # # Board extended module Drivers diff --git a/bsp/stm32/stm32f091-st-nucleo/board/Kconfig b/bsp/stm32/stm32f091-st-nucleo/board/Kconfig index 681580fdce..745a331f31 100644 --- a/bsp/stm32/stm32f091-st-nucleo/board/Kconfig +++ b/bsp/stm32/stm32f091-st-nucleo/board/Kconfig @@ -34,7 +34,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART2 bool "Enable UART2" diff --git a/bsp/stm32/stm32f091-st-nucleo/rtconfig.h b/bsp/stm32/stm32f091-st-nucleo/rtconfig.h index 818e2c9cef..dc6298a719 100644 --- a/bsp/stm32/stm32f091-st-nucleo/rtconfig.h +++ b/bsp/stm32/stm32f091-st-nucleo/rtconfig.h @@ -149,19 +149,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - - -/* Privated Packages of RealThread */ - - -/* Network Utilities */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32F0 @@ -171,9 +160,12 @@ /* Onboard Peripheral Drivers */ +#define BSP_USING_USB_TO_USART + /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART2 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f103-atk-nano/.config b/bsp/stm32/stm32f103-atk-nano/.config index 7a673ceb4d..7a4eec1ff9 100644 --- a/bsp/stm32/stm32f103-atk-nano/.config +++ b/bsp/stm32/stm32f103-atk-nano/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F1=y @@ -341,14 +343,14 @@ CONFIG_BSP_USING_USB_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_UART3 is not set # CONFIG_BSP_USING_TIM is not set # CONFIG_BSP_USING_PWM is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_ADC is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set diff --git a/bsp/stm32/stm32f103-atk-nano/board/Kconfig b/bsp/stm32/stm32f103-atk-nano/board/Kconfig index 84ef7224b6..3c49481a23 100644 --- a/bsp/stm32/stm32f103-atk-nano/board/Kconfig +++ b/bsp/stm32/stm32f103-atk-nano/board/Kconfig @@ -42,37 +42,37 @@ menu "On-chip Peripheral Drivers" default y menuconfig BSP_USING_UART - bool "Enable UART" - default y - select RT_USING_SERIAL - if BSP_USING_UART - config BSP_USING_UART1 - bool "Enable UART1" - default y + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_UART1_RX_USING_DMA - bool "Enable UART1 RX DMA" - depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default n + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n - config BSP_USING_UART2 - bool "Enable UART2" - default n + config BSP_USING_UART2 + bool "Enable UART2" + default n - config BSP_UART2_RX_USING_DMA - bool "Enable UART2 RX DMA" - depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA - default n - - config BSP_USING_UART3 - bool "Enable UART3" - default n + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART3 + bool "Enable UART3" + default n - config BSP_UART3_RX_USING_DMA - bool "Enable UART3 RX DMA" - depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA - default n - endif + config BSP_UART3_RX_USING_DMA + bool "Enable UART3 RX DMA" + depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA + default n + endif config BSP_USING_UART1 bool "Enable UART1" @@ -127,40 +127,40 @@ menu "On-chip Peripheral Drivers" endif menuconfig BSP_USING_SPI - bool "Enable SPI BUS" - default n - select RT_USING_SPI - if BSP_USING_SPI - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - default n + bool "Enable SPI BUS" + default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n - config BSP_SPI1_TX_USING_DMA - bool "Enable SPI1 TX DMA" - depends on BSP_USING_SPI1 - default n - - config BSP_SPI1_RX_USING_DMA - bool "Enable SPI1 RX DMA" - depends on BSP_USING_SPI1 - select BSP_SPI1_TX_USING_DMA - default n + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n - config BSP_USING_SPI2 - bool "Enable SPI2 BUS" - default n - - config BSP_SPI2_TX_USING_DMA - bool "Enable SPI2 TX DMA" - depends on BSP_USING_SPI2 - default n - - config BSP_SPI2_RX_USING_DMA - bool "Enable SPI2 RX DMA" - depends on BSP_USING_SPI2 - select BSP_SPI2_TX_USING_DMA - default n - endif + config BSP_USING_SPI2 + bool "Enable SPI2 BUS" + default n + + config BSP_SPI2_TX_USING_DMA + bool "Enable SPI2 TX DMA" + depends on BSP_USING_SPI2 + default n + + config BSP_SPI2_RX_USING_DMA + bool "Enable SPI2 RX DMA" + depends on BSP_USING_SPI2 + select BSP_SPI2_TX_USING_DMA + default n + endif menuconfig BSP_USING_I2C1 bool "Enable I2C1 BUS (software simulation)" diff --git a/bsp/stm32/stm32f103-atk-nano/rtconfig.h b/bsp/stm32/stm32f103-atk-nano/rtconfig.h index 8bae9ebc30..816034b45d 100644 --- a/bsp/stm32/stm32f103-atk-nano/rtconfig.h +++ b/bsp/stm32/stm32f103-atk-nano/rtconfig.h @@ -166,6 +166,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f103-fire-arbitrary/.config b/bsp/stm32/stm32f103-fire-arbitrary/.config index 81ee04aba5..0938feaf7e 100644 --- a/bsp/stm32/stm32f103-fire-arbitrary/.config +++ b/bsp/stm32/stm32f103-fire-arbitrary/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_LIBC=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F1=y @@ -345,14 +347,13 @@ CONFIG_BSP_USING_USB_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_UART3 is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_USING_SPI3 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_TIM is not set # CONFIG_BSP_USING_PWM is not set diff --git a/bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig b/bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig index 2795400969..983ce4bb86 100644 --- a/bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig +++ b/bsp/stm32/stm32f103-fire-arbitrary/board/Kconfig @@ -54,7 +54,6 @@ menu "Onboard Peripheral Drivers" select WIZNET_DEVICE_EXTERN_CONFIG select BSP_USING_SPI2 if BSP_USING_ETH - if WIZNET_DEVICE_EXTERN_CONFIG config WIZ_SPI_DEVICE string @@ -92,37 +91,37 @@ menu "On-chip Peripheral Drivers" default y menuconfig BSP_USING_UART - bool "Enable UART" - default y - select RT_USING_SERIAL - if BSP_USING_UART - config BSP_USING_UART1 - bool "Enable UART1" - default y + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default y - config BSP_UART1_RX_USING_DMA - bool "Enable UART1 RX DMA" - depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default n + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n - config BSP_USING_UART2 - bool "Enable UART2" - default n + config BSP_USING_UART2 + bool "Enable UART2" + default n - config BSP_UART2_RX_USING_DMA - bool "Enable UART2 RX DMA" - depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA - default n - - config BSP_USING_UART3 - bool "Enable UART3" - default n + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART3 + bool "Enable UART3" + default n - config BSP_UART3_RX_USING_DMA - bool "Enable UART3 RX DMA" - depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA - default n - endif + config BSP_UART3_RX_USING_DMA + bool "Enable UART3 RX DMA" + depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA + default n + endif config BSP_USING_ON_CHIP_FLASH bool "Enable on-chip FLASH" diff --git a/bsp/stm32/stm32f103-fire-arbitrary/rtconfig.h b/bsp/stm32/stm32f103-fire-arbitrary/rtconfig.h index b26cc15cae..5a2ac1c53c 100644 --- a/bsp/stm32/stm32f103-fire-arbitrary/rtconfig.h +++ b/bsp/stm32/stm32f103-fire-arbitrary/rtconfig.h @@ -167,6 +167,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f407-atk-explorer/.config b/bsp/stm32/stm32f407-atk-explorer/.config index 8bb6510a75..177d468704 100644 --- a/bsp/stm32/stm32f407-atk-explorer/.config +++ b/bsp/stm32/stm32f407-atk-explorer/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -333,8 +335,9 @@ CONFIG_SOC_STM32F407ZG=y # Onboard Peripheral Drivers # CONFIG_BSP_USING_USB_TO_USART=y -# CONFIG_BSP_USING_SPI_FLASH is not set +# CONFIG_BSP_USING_COM2 is not set # CONFIG_BSP_USING_COM3 is not set +# CONFIG_BSP_USING_SPI_FLASH is not set # CONFIG_BSP_USING_EEPROM is not set # CONFIG_BSP_USING_ETH is not set # CONFIG_BSP_USING_MPU6050 is not set @@ -344,16 +347,14 @@ CONFIG_BSP_USING_USB_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_USING_UART2 is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART3 is not set -# CONFIG_BSP_USING_UART6 is not set # CONFIG_BSP_USING_TIM is not set # CONFIG_BSP_USING_PWM is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_ADC is not set # CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_ONCHIP_RTC is not set diff --git a/bsp/stm32/stm32f407-atk-explorer/board/Kconfig b/bsp/stm32/stm32f407-atk-explorer/board/Kconfig index 41ce192f9e..66d7cf8d0f 100644 --- a/bsp/stm32/stm32f407-atk-explorer/board/Kconfig +++ b/bsp/stm32/stm32f407-atk-explorer/board/Kconfig @@ -81,7 +81,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART3 bool "Enable UART3" diff --git a/bsp/stm32/stm32f407-atk-explorer/rtconfig.h b/bsp/stm32/stm32f407-atk-explorer/rtconfig.h index e628397b54..d35ad8f997 100644 --- a/bsp/stm32/stm32f407-atk-explorer/rtconfig.h +++ b/bsp/stm32/stm32f407-atk-explorer/rtconfig.h @@ -165,6 +165,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f407-st-discovery/.config b/bsp/stm32/stm32f407-st-discovery/.config index 0755a2d357..855a959166 100644 --- a/bsp/stm32/stm32f407-st-discovery/.config +++ b/bsp/stm32/stm32f407-st-discovery/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -337,10 +339,10 @@ CONFIG_SOC_STM32F407VG=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_UART_USING_DMA_RX is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # diff --git a/bsp/stm32/stm32f407-st-discovery/board/Kconfig b/bsp/stm32/stm32f407-st-discovery/board/Kconfig index 1f5bcd321d..cdb1f1ff48 100644 --- a/bsp/stm32/stm32f407-st-discovery/board/Kconfig +++ b/bsp/stm32/stm32f407-st-discovery/board/Kconfig @@ -28,7 +28,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n endif menuconfig BSP_USING_SPI diff --git a/bsp/stm32/stm32f407-st-discovery/rtconfig.h b/bsp/stm32/stm32f407-st-discovery/rtconfig.h index a7d941bd2b..41e6ddedbd 100644 --- a/bsp/stm32/stm32f407-st-discovery/rtconfig.h +++ b/bsp/stm32/stm32f407-st-discovery/rtconfig.h @@ -163,6 +163,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f429-armfly-v6/.config b/bsp/stm32/stm32f429-armfly-v6/.config index 8615848ef0..e3045b305e 100644 --- a/bsp/stm32/stm32f429-armfly-v6/.config +++ b/bsp/stm32/stm32f429-armfly-v6/.config @@ -282,6 +282,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_LITTLEVGL2RTT is not set # CONFIG_PKG_USING_CMSIS is not set # CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set # # peripheral libraries and drivers @@ -296,6 +297,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_MPU6XXX is not set # CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set # # miscellaneous packages @@ -310,10 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set - -# -# sample package -# +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -322,30 +321,8 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# # CONFIG_PKG_USING_HELLO is not set - -# -# Privated Packages of RealThread -# -# CONFIG_PKG_USING_CODEC is not set -# CONFIG_PKG_USING_PLAYER is not set -# CONFIG_PKG_USING_PERSIMMON_SRC is not set - -# -# Network Utilities -# -# CONFIG_PKG_USING_WICED is not set -# CONFIG_PKG_USING_CLOUDSDK is not set -# CONFIG_PKG_USING_COREMARK is not set -# CONFIG_PKG_USING_POWER_MANAGER is not set -# CONFIG_PKG_USING_RT_OTA is not set -# CONFIG_PKG_USING_RDBD_SRC is not set -# CONFIG_PKG_USING_RTINSIGHT is not set -# CONFIG_PKG_USING_SMARTCONFIG is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -369,11 +346,11 @@ CONFIG_BSP_USING_EXT_FMC_IO=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y -# CONFIG_BSP_UART_USING_DMA_RX is not set +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI3 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_TIM is not set # CONFIG_BSP_USING_PWM is not set diff --git a/bsp/stm32/stm32f429-armfly-v6/board/Kconfig b/bsp/stm32/stm32f429-armfly-v6/board/Kconfig index 498495e8d9..ae6e2de2fd 100644 --- a/bsp/stm32/stm32f429-armfly-v6/board/Kconfig +++ b/bsp/stm32/stm32f429-armfly-v6/board/Kconfig @@ -39,11 +39,23 @@ menu "Onboard Peripheral Drivers" config PHY_USING_DM9161CEP bool - config BSP_USING_ETH + + + menuconfig BSP_USING_ETH bool "Enable Ethernet" - default n select RT_USING_LWIP select PHY_USING_DM9161CEP + default n + if BSP_USING_ETH + config PHY_USING_INTERRUPT_MODE + bool "enable phy interrupt mode" + select PHY_INT_PIN + default n + + config PHY_INT_PIN + int + default 118 + endif config BSP_USING_MPU6050 bool "Enable MPU6050(i2c1)" @@ -74,7 +86,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n endif config BSP_USING_ON_CHIP_FLASH diff --git a/bsp/stm32/stm32f429-armfly-v6/rtconfig.h b/bsp/stm32/stm32f429-armfly-v6/rtconfig.h index 11ecaf3496..eb2f4e408c 100644 --- a/bsp/stm32/stm32f429-armfly-v6/rtconfig.h +++ b/bsp/stm32/stm32f429-armfly-v6/rtconfig.h @@ -150,19 +150,8 @@ /* miscellaneous packages */ -/* sample package */ - /* samples: kernel and components samples */ - -/* example package: hello */ - - -/* Privated Packages of RealThread */ - - -/* Network Utilities */ - #define SOC_FAMILY_STM32 #define SOC_SERIES_STM32F4 @@ -178,6 +167,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f429-atk-apollo/.config b/bsp/stm32/stm32f429-atk-apollo/.config index e382919ed4..90c7572d90 100644 --- a/bsp/stm32/stm32f429-atk-apollo/.config +++ b/bsp/stm32/stm32f429-atk-apollo/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -345,14 +347,13 @@ CONFIG_BSP_USING_USB_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_UART3 is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_USING_SPI5 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_TIM is not set # CONFIG_BSP_USING_PWM is not set diff --git a/bsp/stm32/stm32f429-atk-apollo/board/Kconfig b/bsp/stm32/stm32f429-atk-apollo/board/Kconfig index c8529ead4f..916e0844a4 100644 --- a/bsp/stm32/stm32f429-atk-apollo/board/Kconfig +++ b/bsp/stm32/stm32f429-atk-apollo/board/Kconfig @@ -81,7 +81,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART2 bool "Enable UART2" diff --git a/bsp/stm32/stm32f429-atk-apollo/rtconfig.h b/bsp/stm32/stm32f429-atk-apollo/rtconfig.h index f3f451258a..bcf153da33 100644 --- a/bsp/stm32/stm32f429-atk-apollo/rtconfig.h +++ b/bsp/stm32/stm32f429-atk-apollo/rtconfig.h @@ -165,6 +165,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f429-fire-challenger/.config b/bsp/stm32/stm32f429-fire-challenger/.config index 81eb948fb4..c12660c8fe 100644 --- a/bsp/stm32/stm32f429-fire-challenger/.config +++ b/bsp/stm32/stm32f429-fire-challenger/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F4=y @@ -346,14 +348,12 @@ CONFIG_BSP_USING_USB_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART2 is not set -# CONFIG_BSP_USING_UART3 is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_USING_SPI5 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_TIM is not set # CONFIG_BSP_USING_PWM is not set # CONFIG_BSP_USING_ADC is not set diff --git a/bsp/stm32/stm32f429-fire-challenger/board/Kconfig b/bsp/stm32/stm32f429-fire-challenger/board/Kconfig index 2c8d3f10cf..252f188c27 100644 --- a/bsp/stm32/stm32f429-fire-challenger/board/Kconfig +++ b/bsp/stm32/stm32f429-fire-challenger/board/Kconfig @@ -15,7 +15,7 @@ menu "Onboard Peripheral Drivers" config BSP_USING_RS232 bool "Enable RS232" - select BSP_USING_UART + select BSP_USING_UART select BSP_USING_UART2 default n @@ -91,7 +91,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART2 bool "Enable UART2" @@ -101,7 +101,6 @@ menu "On-chip Peripheral Drivers" bool "Enable UART2 RX DMA" depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA default n - endif config BSP_USING_ON_CHIP_FLASH diff --git a/bsp/stm32/stm32f429-fire-challenger/rtconfig.h b/bsp/stm32/stm32f429-fire-challenger/rtconfig.h index 83dbf4c0d3..7e366cf856 100644 --- a/bsp/stm32/stm32f429-fire-challenger/rtconfig.h +++ b/bsp/stm32/stm32f429-fire-challenger/rtconfig.h @@ -166,6 +166,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f767-atk-apollo/.config b/bsp/stm32/stm32f767-atk-apollo/.config index 0e7b661c84..46bbff3a82 100644 --- a/bsp/stm32/stm32f767-atk-apollo/.config +++ b/bsp/stm32/stm32f767-atk-apollo/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F7=y @@ -336,28 +338,31 @@ CONFIG_BSP_USING_USB_TO_USART=y # CONFIG_BSP_USING_RS232 is not set # CONFIG_BSP_USING_SDRAM is not set # CONFIG_BSP_USING_QSPI_FLASH is not set -# CONFIG_BSP_USING_MPU6050 is not set +# CONFIG_BSP_USING_MPU9250 is not set +# CONFIG_BSP_USING_ETH is not set +# CONFIG_BSP_USING_POT is not set +# CONFIG_BSP_USING_SDCARD is not set # # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART2 is not set -# CONFIG_BSP_USING_UART3 is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_USING_SPI5 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_QSPI is not set +# CONFIG_BSP_QSPI_USING_DMA is not set +# CONFIG_BSP_USING_TIM is not set +# CONFIG_BSP_USING_PWM is not set # CONFIG_BSP_USING_ADC is not set # CONFIG_BSP_USING_I2C1 is not set # CONFIG_BSP_USING_I2C2 is not set -# CONFIG_BSP_USING_I2C3 is not set -# CONFIG_BSP_USING_I2C4 is not set # CONFIG_BSP_USING_ONCHIP_RTC is not set # CONFIG_BSP_USING_WDT is not set +# CONFIG_BSP_USING_SDIO is not set # # Board extended module Drivers diff --git a/bsp/stm32/stm32f767-atk-apollo/board/Kconfig b/bsp/stm32/stm32f767-atk-apollo/board/Kconfig index e87dbd896a..7d1273b33f 100644 --- a/bsp/stm32/stm32f767-atk-apollo/board/Kconfig +++ b/bsp/stm32/stm32f767-atk-apollo/board/Kconfig @@ -81,7 +81,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART2 bool "Enable UART2" @@ -98,7 +98,7 @@ menu "On-chip Peripheral Drivers" bool "Enable on-chip FLASH" default n -menuconfig BSP_USING_SPI + menuconfig BSP_USING_SPI bool "Enable SPI BUS" default n select RT_USING_SPI diff --git a/bsp/stm32/stm32f767-atk-apollo/rtconfig.h b/bsp/stm32/stm32f767-atk-apollo/rtconfig.h index 7623c3fda4..23599ade59 100644 --- a/bsp/stm32/stm32f767-atk-apollo/rtconfig.h +++ b/bsp/stm32/stm32f767-atk-apollo/rtconfig.h @@ -165,6 +165,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32f767-fire-challenger/.config b/bsp/stm32/stm32f767-fire-challenger/.config index 90f3a7719a..7d506e7350 100644 --- a/bsp/stm32/stm32f767-fire-challenger/.config +++ b/bsp/stm32/stm32f767-fire-challenger/.config @@ -181,6 +181,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_RT_USING_LOGTRACE is not set # CONFIG_RT_USING_RYM is not set # CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set # # ARM CMSIS @@ -311,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -320,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32F7=y @@ -341,21 +344,15 @@ CONFIG_BSP_USING_USB_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_UART3 is not set -# CONFIG_BSP_UART_USING_DMA_RX is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_USING_SPI5 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_QSPI is not set # CONFIG_BSP_USING_ADC is not set # CONFIG_BSP_USING_I2C1 is not set -# CONFIG_BSP_USING_I2C2 is not set -# CONFIG_BSP_USING_I2C3 is not set -# CONFIG_BSP_USING_I2C4 is not set # CONFIG_BSP_USING_ONCHIP_RTC is not set # CONFIG_BSP_USING_WDT is not set diff --git a/bsp/stm32/stm32f767-fire-challenger/board/Kconfig b/bsp/stm32/stm32f767-fire-challenger/board/Kconfig index 2423430d38..707a0a4746 100644 --- a/bsp/stm32/stm32f767-fire-challenger/board/Kconfig +++ b/bsp/stm32/stm32f767-fire-challenger/board/Kconfig @@ -57,7 +57,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART2 bool "Enable UART2" @@ -74,7 +74,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART3_RX_USING_DMA bool "Enable UART3 RX DMA" - depends on BSP_USING_UART3 && RT_SERIsAL_USING_DMA + depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA default n endif diff --git a/bsp/stm32/stm32f767-fire-challenger/rtconfig.h b/bsp/stm32/stm32f767-fire-challenger/rtconfig.h index d001b714a7..16f05af945 100644 --- a/bsp/stm32/stm32f767-fire-challenger/rtconfig.h +++ b/bsp/stm32/stm32f767-fire-challenger/rtconfig.h @@ -165,6 +165,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ diff --git a/bsp/stm32/stm32l475-atk-pandora/.config b/bsp/stm32/stm32l475-atk-pandora/.config index 5212663f43..630083f09c 100644 --- a/bsp/stm32/stm32l475-atk-pandora/.config +++ b/bsp/stm32/stm32l475-atk-pandora/.config @@ -312,6 +312,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_ZLIB is not set # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # # samples: kernel and components samples @@ -321,6 +322,7 @@ CONFIG_RT_USING_PIN=y # CONFIG_PKG_USING_NETWORK_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set CONFIG_SOC_FAMILY_STM32=y CONFIG_SOC_SERIES_STM32L4=y @@ -340,12 +342,12 @@ CONFIG_BSP_USING_STLINK_TO_USART=y # On-chip Peripheral Drivers # CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y CONFIG_BSP_USING_UART1=y +# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_USING_UART2 is not set # CONFIG_BSP_USING_ON_CHIP_FLASH is not set -# CONFIG_BSP_USING_SPI1 is not set -# CONFIG_BSP_USING_SPI2 is not set -# CONFIG_BSP_SPI_USING_DMA is not set +# CONFIG_BSP_USING_SPI is not set # CONFIG_BSP_USING_QSPI is not set # CONFIG_BSP_QSPI_USING_DMA is not set # CONFIG_BSP_USING_I2C1 is not set diff --git a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig index 538cf8d472..0ec5631f1a 100644 --- a/bsp/stm32/stm32l475-atk-pandora/board/Kconfig +++ b/bsp/stm32/stm32l475-atk-pandora/board/Kconfig @@ -24,7 +24,6 @@ menu "Onboard Peripheral Drivers" bool "Enable SDCARD (spi1)" select BSP_USING_SPI select BSP_USING_SPI1 - select BSP_SPI_USING_DMA select RT_USING_SPI_MSD select RT_USING_DFS select RT_USING_DFS_ELMFAT @@ -51,7 +50,7 @@ menu "On-chip Peripheral Drivers" config BSP_UART1_RX_USING_DMA bool "Enable UART1 RX DMA" depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default y + default n config BSP_USING_UART2 bool "Enable UART2" diff --git a/bsp/stm32/stm32l475-atk-pandora/rtconfig.h b/bsp/stm32/stm32l475-atk-pandora/rtconfig.h index 82891ef0a0..f138878738 100644 --- a/bsp/stm32/stm32l475-atk-pandora/rtconfig.h +++ b/bsp/stm32/stm32l475-atk-pandora/rtconfig.h @@ -165,6 +165,7 @@ /* On-chip Peripheral Drivers */ #define BSP_USING_GPIO +#define BSP_USING_UART #define BSP_USING_UART1 /* Board extended module Drivers */ |