diff options
Diffstat (limited to 'bsp/ra6m4-cpk/script/fsp.ld')
| -rw-r--r-- | bsp/ra6m4-cpk/script/fsp.ld | 585 |
1 files changed, 585 insertions, 0 deletions
diff --git a/bsp/ra6m4-cpk/script/fsp.ld b/bsp/ra6m4-cpk/script/fsp.ld new file mode 100644 index 0000000000..1cb1bb36db --- /dev/null +++ b/bsp/ra6m4-cpk/script/fsp.ld @@ -0,0 +1,585 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = 0x0100A180; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = !DEFINED(PROJECT_NONSECURE) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START; +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +FLASH_ORIGIN = DEFINED(FLASH_IMAGE_START) ? FLASH_IMAGE_START : FLASH_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; + +/* Define memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + + /* TrustZone Secure Gateway Stubs Section. */ + .gnu.sgstubs : ALIGN (1024) + { + . = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); + .qspi_non_retentive : AT (__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); + .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); + .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_N = __ID_Code_End; + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING); + + .option_setting : + { + __OPTION_SETTING_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start; + KEEP(*(.option_setting_dualsel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = OPTION_SETTING_START_NS; + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} |