diff options
Diffstat (limited to 'components/external/SQLite-3.8.1/make')
| -rw-r--r-- | components/external/SQLite-3.8.1/make/Makefile | 996 | ||||
| -rw-r--r-- | components/external/SQLite-3.8.1/make/config.h | 114 | ||||
| -rw-r--r-- | components/external/SQLite-3.8.1/make/config.log | 2646 | ||||
| -rw-r--r-- | components/external/SQLite-3.8.1/make/config.status | 1869 | ||||
| -rw-r--r-- | components/external/SQLite-3.8.1/make/libtool | 8945 | ||||
| -rw-r--r-- | components/external/SQLite-3.8.1/make/sqlite3.pc | 13 |
6 files changed, 14583 insertions, 0 deletions
diff --git a/components/external/SQLite-3.8.1/make/Makefile b/components/external/SQLite-3.8.1/make/Makefile new file mode 100644 index 0000000000..ccf18c35dc --- /dev/null +++ b/components/external/SQLite-3.8.1/make/Makefile @@ -0,0 +1,996 @@ +#!/usr/make +# +# Makefile for SQLITE +# +# This makefile is suppose to be configured automatically using the +# autoconf. But if that does not work for you, you can configure +# the makefile manually. Just set the parameters below to values that +# work well for your system. +# +# If the configure script does not work out-of-the-box, you might +# be able to get it to work by giving it some hints. See the comment +# at the beginning of configure.in for additional information. +# + +# The toplevel directory of the source tree. This is the directory +# that contains this "Makefile.in" and the "configure.in" script. +# +TOP = .. + +# C Compiler and options for use in building executables that +# will run on the platform that is doing the build. +# +BCC = gcc -g + +# C Compile and options for use in building executables that +# will run on the target platform. (BCC and TCC are usually the +# same unless your are cross-compiling.) +# +TCC = arm-none-eabi-gcc -g -O2 -DSQLITE_OS_UNIX=1 -I. -I${TOP}/src -I${TOP}/ext/rtree + +# Define this for the autoconf-based build, so that the code knows it can +# include the generated config.h +# +TCC += -D_HAVE_SQLITE_CONFIG_H -DBUILD_sqlite + +# Define -DNDEBUG to compile without debugging (i.e., for production usage) +# Omitting the define will cause extra debugging code to be inserted and +# includes extra comments when "EXPLAIN stmt" is used. +# +TCC += -DNDEBUG + +# Compiler options needed for programs that use the TCL library. +# +TCC += -I/usr/include + +# The library that programs using TCL must link against. +# +LIBTCL = -L/usr/lib -ltcl8.5 + +# Compiler options needed for programs that use the readline() library. +# +READLINE_FLAGS = -DHAVE_READLINE=0 + +# The library that programs using readline() must link against. +# +LIBREADLINE = + +# Should the database engine be compiled threadsafe +# +TCC += -DSQLITE_THREADSAFE=1 + +# Any target libraries which libsqlite must be linked against +# +TLIBS = + +# Flags controlling use of the in memory btree implementation +# +# SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to +# default to file, 2 to default to memory, and 3 to force temporary +# tables to always be in memory. +# +TEMP_STORE = -DSQLITE_TEMP_STORE=1 + +# Enable/disable loadable extensions, and other optional features +# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*). +# The same set of OMIT and ENABLE flags should be passed to the +# LEMON parser generator and the mkkeywordhash tool as well. +OPT_FEATURE_FLAGS = -DSQLITE_OMIT_LOAD_EXTENSION=1 + +TCC += $(OPT_FEATURE_FLAGS) + +# Add in any optional parameters specified on the make commane line +# ie. make "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1". +TCC += $(OPTS) + +# Version numbers and release number for the SQLite being compiled. +# +VERSION = 3.8 +VERSION_NUMBER = 3008001 +RELEASE = 3.8.1 + +# Filename extensions +# +BEXE = +TEXE = + +# The following variable is "1" if the configure script was able to locate +# the tclConfig.sh file. It is an empty string otherwise. When this +# variable is "1", the TCL extension library (libtclsqlite3.so) is built +# and installed. +# +HAVE_TCL = 1 + +# This is the command to use for tclsh - normally just "tclsh", but we may +# know the specific version we want to use +# +TCLSH_CMD = tclsh8.5 + +# Where do we want to install the tcl plugin +# +TCLLIBDIR = /usr/lib/tcl8.5/sqlite3 + +# The suffix used on shared libraries. Ex: ".dll", ".so", ".dylib" +# +SHLIB_SUFFIX = @TCL_SHLIB_SUFFIX@ + +# If gcov support was enabled by the configure script, add the appropriate +# flags here. It's not always as easy as just having the user add the right +# CFLAGS / LDFLAGS, because libtool wants to use CFLAGS when linking, which +# causes build errors with -fprofile-arcs -ftest-coverage with some GCCs. +# Supposedly GCC does the right thing if you use --coverage, but in +# practice it still fails. See: +# +# http://www.mail-archive.com/[email protected]/msg26197.html +# +# for more info. +# +GCOV_CFLAGS1 = -DSQLITE_COVERAGE_TEST=1 -fprofile-arcs -ftest-coverage +GCOV_LDFLAGS1 = -lgcov +USE_GCOV = 0 +LTCOMPILE_EXTRAS += $(GCOV_CFLAGS$(USE_GCOV)) +LTLINK_EXTRAS += $(GCOV_LDFLAGS$(USE_GCOV)) + + +# The directory into which to store package information for + +# Some standard variables and programs +# +prefix = /usr/local +exec_prefix = ${prefix} +libdir = ${exec_prefix}/lib +pkgconfigdir = $(libdir)/pkgconfig +bindir = ${exec_prefix}/bin +includedir = ${prefix}/include +INSTALL = /usr/bin/install -c +LIBTOOL = ./libtool +ALLOWRELEASE = + +# libtool compile/link/install +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(TCC) $(LTCOMPILE_EXTRAS) +LTLINK = $(LIBTOOL) --mode=link $(TCC) $(LTCOMPILE_EXTRAS) $(LTLINK_EXTRAS) +LTINSTALL = $(LIBTOOL) --mode=install $(INSTALL) + +# nawk compatible awk. +NAWK = gawk + +# You should not have to change anything below this line +############################################################################### + +USE_AMALGAMATION = 1 + +# Object files for the SQLite library (non-amalgamation). +# +LIBOBJS0 = alter.lo analyze.lo attach.lo auth.lo \ + backup.lo bitvec.lo btmutex.lo btree.lo build.lo \ + callback.lo complete.lo ctime.lo date.lo delete.lo \ + expr.lo fault.lo fkey.lo \ + fts3.lo fts3_aux.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo \ + fts3_porter.lo fts3_snippet.lo fts3_tokenizer.lo fts3_tokenizer1.lo \ + fts3_tokenize_vtab.lo \ + fts3_unicode.lo fts3_unicode2.lo fts3_write.lo \ + func.lo global.lo hash.lo \ + icu.lo insert.lo journal.lo legacy.lo loadext.lo \ + main.lo malloc.lo mem0.lo mem1.lo mem2.lo mem3.lo mem5.lo \ + memjournal.lo \ + mutex.lo mutex_noop.lo mutex_unix.lo mutex_w32.lo \ + notify.lo opcodes.lo os.lo os_unix.lo os_win.lo \ + pager.lo parse.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \ + random.lo resolve.lo rowset.lo rtree.lo select.lo status.lo \ + table.lo tokenize.lo trigger.lo \ + update.lo util.lo vacuum.lo \ + vdbe.lo vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbesort.lo \ + vdbetrace.lo wal.lo walker.lo where.lo utf.lo vtab.lo + +# Object files for the amalgamation. +# +LIBOBJS1 = sqlite3.lo + +# Determine the real value of LIBOBJ based on the 'configure' script +# +LIBOBJ = $(LIBOBJS$(USE_AMALGAMATION)) + + +# All of the source code files. +# +SRC = \ + $(TOP)/src/alter.c \ + $(TOP)/src/analyze.c \ + $(TOP)/src/attach.c \ + $(TOP)/src/auth.c \ + $(TOP)/src/backup.c \ + $(TOP)/src/bitvec.c \ + $(TOP)/src/btmutex.c \ + $(TOP)/src/btree.c \ + $(TOP)/src/btree.h \ + $(TOP)/src/btreeInt.h \ + $(TOP)/src/build.c \ + $(TOP)/src/callback.c \ + $(TOP)/src/complete.c \ + $(TOP)/src/ctime.c \ + $(TOP)/src/date.c \ + $(TOP)/src/delete.c \ + $(TOP)/src/expr.c \ + $(TOP)/src/fault.c \ + $(TOP)/src/fkey.c \ + $(TOP)/src/func.c \ + $(TOP)/src/global.c \ + $(TOP)/src/hash.c \ + $(TOP)/src/hash.h \ + $(TOP)/src/hwtime.h \ + $(TOP)/src/insert.c \ + $(TOP)/src/journal.c \ + $(TOP)/src/legacy.c \ + $(TOP)/src/loadext.c \ + $(TOP)/src/main.c \ + $(TOP)/src/malloc.c \ + $(TOP)/src/mem0.c \ + $(TOP)/src/mem1.c \ + $(TOP)/src/mem2.c \ + $(TOP)/src/mem3.c \ + $(TOP)/src/mem5.c \ + $(TOP)/src/memjournal.c \ + $(TOP)/src/mutex.c \ + $(TOP)/src/mutex.h \ + $(TOP)/src/mutex_noop.c \ + $(TOP)/src/mutex_unix.c \ + $(TOP)/src/mutex_w32.c \ + $(TOP)/src/notify.c \ + $(TOP)/src/os.c \ + $(TOP)/src/os.h \ + $(TOP)/src/os_common.h \ + $(TOP)/src/os_unix.c \ + $(TOP)/src/os_win.c \ + $(TOP)/src/pager.c \ + $(TOP)/src/pager.h \ + $(TOP)/src/parse.y \ + $(TOP)/src/pcache.c \ + $(TOP)/src/pcache.h \ + $(TOP)/src/pcache1.c \ + $(TOP)/src/pragma.c \ + $(TOP)/src/prepare.c \ + $(TOP)/src/printf.c \ + $(TOP)/src/random.c \ + $(TOP)/src/resolve.c \ + $(TOP)/src/rowset.c \ + $(TOP)/src/select.c \ + $(TOP)/src/status.c \ + $(TOP)/src/shell.c \ + $(TOP)/src/sqlite.h.in \ + $(TOP)/src/sqlite3ext.h \ + $(TOP)/src/sqliteInt.h \ + $(TOP)/src/sqliteLimit.h \ + $(TOP)/src/table.c \ + $(TOP)/src/tclsqlite.c \ + $(TOP)/src/tokenize.c \ + $(TOP)/src/trigger.c \ + $(TOP)/src/utf.c \ + $(TOP)/src/update.c \ + $(TOP)/src/util.c \ + $(TOP)/src/vacuum.c \ + $(TOP)/src/vdbe.c \ + $(TOP)/src/vdbe.h \ + $(TOP)/src/vdbeapi.c \ + $(TOP)/src/vdbeaux.c \ + $(TOP)/src/vdbeblob.c \ + $(TOP)/src/vdbemem.c \ + $(TOP)/src/vdbesort.c \ + $(TOP)/src/vdbetrace.c \ + $(TOP)/src/vdbeInt.h \ + $(TOP)/src/vtab.c \ + $(TOP)/src/wal.c \ + $(TOP)/src/wal.h \ + $(TOP)/src/walker.c \ + $(TOP)/src/where.c + +# Source code for extensions +# +SRC += \ + $(TOP)/ext/fts1/fts1.c \ + $(TOP)/ext/fts1/fts1.h \ + $(TOP)/ext/fts1/fts1_hash.c \ + $(TOP)/ext/fts1/fts1_hash.h \ + $(TOP)/ext/fts1/fts1_porter.c \ + $(TOP)/ext/fts1/fts1_tokenizer.h \ + $(TOP)/ext/fts1/fts1_tokenizer1.c +SRC += \ + $(TOP)/ext/fts2/fts2.c \ + $(TOP)/ext/fts2/fts2.h \ + $(TOP)/ext/fts2/fts2_hash.c \ + $(TOP)/ext/fts2/fts2_hash.h \ + $(TOP)/ext/fts2/fts2_icu.c \ + $(TOP)/ext/fts2/fts2_porter.c \ + $(TOP)/ext/fts2/fts2_tokenizer.h \ + $(TOP)/ext/fts2/fts2_tokenizer.c \ + $(TOP)/ext/fts2/fts2_tokenizer1.c +SRC += \ + $(TOP)/ext/fts3/fts3.c \ + $(TOP)/ext/fts3/fts3.h \ + $(TOP)/ext/fts3/fts3Int.h \ + $(TOP)/ext/fts3/fts3_aux.c \ + $(TOP)/ext/fts3/fts3_expr.c \ + $(TOP)/ext/fts3/fts3_hash.c \ + $(TOP)/ext/fts3/fts3_hash.h \ + $(TOP)/ext/fts3/fts3_icu.c \ + $(TOP)/ext/fts3/fts3_porter.c \ + $(TOP)/ext/fts3/fts3_snippet.c \ + $(TOP)/ext/fts3/fts3_tokenizer.h \ + $(TOP)/ext/fts3/fts3_tokenizer.c \ + $(TOP)/ext/fts3/fts3_tokenizer1.c \ + $(TOP)/ext/fts3/fts3_tokenize_vtab.c \ + $(TOP)/ext/fts3/fts3_unicode.c \ + $(TOP)/ext/fts3/fts3_unicode2.c \ + $(TOP)/ext/fts3/fts3_write.c +SRC += \ + $(TOP)/ext/icu/sqliteicu.h \ + $(TOP)/ext/icu/icu.c +SRC += \ + $(TOP)/ext/rtree/rtree.h \ + $(TOP)/ext/rtree/rtree.c + + +# Generated source code files +# +SRC += \ + keywordhash.h \ + opcodes.c \ + opcodes.h \ + parse.c \ + parse.h \ + config.h \ + sqlite3.h + +# Source code to the test files. +# +TESTSRC = \ + $(TOP)/src/test1.c \ + $(TOP)/src/test2.c \ + $(TOP)/src/test3.c \ + $(TOP)/src/test4.c \ + $(TOP)/src/test5.c \ + $(TOP)/src/test6.c \ + $(TOP)/src/test7.c \ + $(TOP)/src/test8.c \ + $(TOP)/src/test9.c \ + $(TOP)/src/test_autoext.c \ + $(TOP)/src/test_async.c \ + $(TOP)/src/test_backup.c \ + $(TOP)/src/test_btree.c \ + $(TOP)/src/test_config.c \ + $(TOP)/src/test_demovfs.c \ + $(TOP)/src/test_devsym.c \ + $(TOP)/src/test_fs.c \ + $(TOP)/src/test_func.c \ + $(TOP)/src/test_hexio.c \ + $(TOP)/src/test_init.c \ + $(TOP)/src/test_intarray.c \ + $(TOP)/src/test_journal.c \ + $(TOP)/src/test_malloc.c \ + $(TOP)/src/test_multiplex.c \ + $(TOP)/src/test_mutex.c \ + $(TOP)/src/test_onefile.c \ + $(TOP)/src/test_osinst.c \ + $(TOP)/src/test_pcache.c \ + $(TOP)/src/test_quota.c \ + $(TOP)/src/test_rtree.c \ + $(TOP)/src/test_schema.c \ + $(TOP)/src/test_server.c \ + $(TOP)/src/test_superlock.c \ + $(TOP)/src/test_syscall.c \ + $(TOP)/src/test_stat.c \ + $(TOP)/src/test_tclvar.c \ + $(TOP)/src/test_thread.c \ + $(TOP)/src/test_vfs.c \ + $(TOP)/src/test_wsd.c \ + $(TOP)/ext/fts3/fts3_term.c \ + $(TOP)/ext/fts3/fts3_test.c + +# Statically linked extensions +# +TESTSRC += \ + $(TOP)/ext/misc/amatch.c \ + $(TOP)/ext/misc/closure.c \ + $(TOP)/ext/misc/fuzzer.c \ + $(TOP)/ext/misc/ieee754.c \ + $(TOP)/ext/misc/nextchar.c \ + $(TOP)/ext/misc/percentile.c \ + $(TOP)/ext/misc/regexp.c \ + $(TOP)/ext/misc/spellfix.c \ + $(TOP)/ext/misc/totype.c \ + $(TOP)/ext/misc/wholenumber.c + +# Source code to the library files needed by the test fixture +# +TESTSRC2 = \ + $(TOP)/src/attach.c \ + $(TOP)/src/backup.c \ + $(TOP)/src/bitvec.c \ + $(TOP)/src/btree.c \ + $(TOP)/src/build.c \ + $(TOP)/src/ctime.c \ + $(TOP)/src/date.c \ + $(TOP)/src/expr.c \ + $(TOP)/src/func.c \ + $(TOP)/src/insert.c \ + $(TOP)/src/wal.c \ + $(TOP)/src/main.c \ + $(TOP)/src/mem5.c \ + $(TOP)/src/os.c \ + $(TOP)/src/os_unix.c \ + $(TOP)/src/os_win.c \ + $(TOP)/src/pager.c \ + $(TOP)/src/pragma.c \ + $(TOP)/src/prepare.c \ + $(TOP)/src/printf.c \ + $(TOP)/src/random.c \ + $(TOP)/src/pcache.c \ + $(TOP)/src/pcache1.c \ + $(TOP)/src/select.c \ + $(TOP)/src/tokenize.c \ + $(TOP)/src/utf.c \ + $(TOP)/src/util.c \ + $(TOP)/src/vdbeapi.c \ + $(TOP)/src/vdbeaux.c \ + $(TOP)/src/vdbe.c \ + $(TOP)/src/vdbemem.c \ + $(TOP)/src/vdbetrace.c \ + $(TOP)/src/where.c \ + parse.c \ + $(TOP)/ext/fts3/fts3.c \ + $(TOP)/ext/fts3/fts3_aux.c \ + $(TOP)/ext/fts3/fts3_expr.c \ + $(TOP)/ext/fts3/fts3_term.c \ + $(TOP)/ext/fts3/fts3_tokenizer.c \ + $(TOP)/ext/fts3/fts3_write.c \ + $(TOP)/ext/async/sqlite3async.c + +# Header files used by all library source files. +# +HDR = \ + $(TOP)/src/btree.h \ + $(TOP)/src/btreeInt.h \ + $(TOP)/src/hash.h \ + $(TOP)/src/hwtime.h \ + keywordhash.h \ + $(TOP)/src/mutex.h \ + opcodes.h \ + $(TOP)/src/os.h \ + $(TOP)/src/os_common.h \ + $(TOP)/src/pager.h \ + $(TOP)/src/pcache.h \ + parse.h \ + sqlite3.h \ + $(TOP)/src/sqlite3ext.h \ + $(TOP)/src/sqliteInt.h \ + $(TOP)/src/sqliteLimit.h \ + $(TOP)/src/vdbe.h \ + $(TOP)/src/vdbeInt.h \ + config.h + +# Header files used by extensions +# +EXTHDR += \ + $(TOP)/ext/fts1/fts1.h \ + $(TOP)/ext/fts1/fts1_hash.h \ + $(TOP)/ext/fts1/fts1_tokenizer.h +EXTHDR += \ + $(TOP)/ext/fts2/fts2.h \ + $(TOP)/ext/fts2/fts2_hash.h \ + $(TOP)/ext/fts2/fts2_tokenizer.h +EXTHDR += \ + $(TOP)/ext/fts3/fts3.h \ + $(TOP)/ext/fts3/fts3Int.h \ + $(TOP)/ext/fts3/fts3_hash.h \ + $(TOP)/ext/fts3/fts3_tokenizer.h +EXTHDR += \ + $(TOP)/ext/rtree/rtree.h +EXTHDR += \ + $(TOP)/ext/icu/sqliteicu.h +EXTHDR += \ + $(TOP)/ext/rtree/sqlite3rtree.h + +# This is the default Makefile target. The objects listed here +# are what get build when you type just "make" with no arguments. +# +all: sqlite3.h libsqlite3.la sqlite3$(TEXE) $(HAVE_TCL:1=libtclsqlite3.la) + +Makefile: $(TOP)/Makefile.in + ./config.status + +sqlite3.pc: $(TOP)/sqlite3.pc.in + ./config.status + +libsqlite3.la: $(LIBOBJ) + $(LTLINK) -no-undefined -o $@ $(LIBOBJ) $(TLIBS) \ + ${ALLOWRELEASE} -rpath "$(libdir)" -version-info "8:6:8" + +libtclsqlite3.la: tclsqlite.lo libsqlite3.la + $(LTLINK) -no-undefined -o $@ tclsqlite.lo \ + libsqlite3.la -Wl,-ltclstub8.5 $(TLIBS) \ + -rpath "$(TCLLIBDIR)" \ + -version-info "8:6:8" \ + -avoid-version + +sqlite3$(TEXE): $(TOP)/src/shell.c libsqlite3.la sqlite3.h + $(LTLINK) $(READLINE_FLAGS) \ + -o $@ $(TOP)/src/shell.c libsqlite3.la \ + $(LIBREADLINE) $(TLIBS) -rpath "$(libdir)" + +mptester$(EXE): sqlite3.c $(TOP)/mptest/mptest.c + $(LTLINK) -o $@ -I. $(TOP)/mptest/mptest.c sqlite3.c \ + $(TLIBS) -rpath "$(libdir)" + + +# This target creates a directory named "tsrc" and fills it with +# copies of all of the C source code and header files needed to +# build on the target system. Some of the C source code and header +# files are automatically generated. This target takes care of +# all that automatic generation. +# +.target_source: $(SRC) $(TOP)/tool/vdbe-compress.tcl + rm -rf tsrc + mkdir tsrc + cp -f $(SRC) tsrc + rm tsrc/sqlite.h.in tsrc/parse.y + $(TCLSH_CMD) $(TOP)/tool/vdbe-compress.tcl <tsrc/vdbe.c >vdbe.new + mv vdbe.new tsrc/vdbe.c + touch .target_source + +sqlite3.c: .target_source $(TOP)/tool/mksqlite3c.tcl + $(TCLSH_CMD) $(TOP)/tool/mksqlite3c.tcl + cp tsrc/shell.c tsrc/sqlite3ext.h . + +tclsqlite3.c: sqlite3.c + echo '#ifndef USE_SYSTEM_SQLITE' >tclsqlite3.c + cat sqlite3.c >>tclsqlite3.c + echo '#endif /* USE_SYSTEM_SQLITE */' >>tclsqlite3.c + cat $(TOP)/src/tclsqlite.c >>tclsqlite3.c + +sqlite3-all.c: sqlite3.c $(TOP)/tool/split-sqlite3c.tcl + $(TCLSH_CMD) $(TOP)/tool/split-sqlite3c.tcl + +# Rule to build the amalgamation +# +sqlite3.lo: sqlite3.c + $(LTCOMPILE) $(TEMP_STORE) -c sqlite3.c + +# Rules to build the LEMON compiler generator +# +lemon$(BEXE): $(TOP)/tool/lemon.c $(TOP)/src/lempar.c + $(BCC) -o $@ $(TOP)/tool/lemon.c + cp $(TOP)/src/lempar.c . + +# Rules to build individual *.o files from generated *.c files. This +# applies to: +# +# parse.o +# opcodes.o +# +parse.lo: parse.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c parse.c + +opcodes.lo: opcodes.c + $(LTCOMPILE) $(TEMP_STORE) -c opcodes.c + +# Rules to build individual *.o files from files in the src directory. +# +alter.lo: $(TOP)/src/alter.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/alter.c + +analyze.lo: $(TOP)/src/analyze.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/analyze.c + +attach.lo: $(TOP)/src/attach.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/attach.c + +auth.lo: $(TOP)/src/auth.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/auth.c + +backup.lo: $(TOP)/src/backup.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/backup.c + +bitvec.lo: $(TOP)/src/bitvec.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/bitvec.c + +btmutex.lo: $(TOP)/src/btmutex.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/btmutex.c + +btree.lo: $(TOP)/src/btree.c $(HDR) $(TOP)/src/pager.h + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/btree.c + +build.lo: $(TOP)/src/build.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/build.c + +callback.lo: $(TOP)/src/callback.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/callback.c + +complete.lo: $(TOP)/src/complete.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/complete.c + +ctime.lo: $(TOP)/src/ctime.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/ctime.c + +date.lo: $(TOP)/src/date.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/date.c + +delete.lo: $(TOP)/src/delete.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/delete.c + +expr.lo: $(TOP)/src/expr.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/expr.c + +fault.lo: $(TOP)/src/fault.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/fault.c + +fkey.lo: $(TOP)/src/fkey.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/fkey.c + +func.lo: $(TOP)/src/func.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/func.c + +global.lo: $(TOP)/src/global.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/global.c + +hash.lo: $(TOP)/src/hash.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/hash.c + +insert.lo: $(TOP)/src/insert.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/insert.c + +journal.lo: $(TOP)/src/journal.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/journal.c + +legacy.lo: $(TOP)/src/legacy.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/legacy.c + +loadext.lo: $(TOP)/src/loadext.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/loadext.c + +main.lo: $(TOP)/src/main.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/main.c + +malloc.lo: $(TOP)/src/malloc.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/malloc.c + +mem0.lo: $(TOP)/src/mem0.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mem0.c + +mem1.lo: $(TOP)/src/mem1.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mem1.c + +mem2.lo: $(TOP)/src/mem2.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mem2.c + +mem3.lo: $(TOP)/src/mem3.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mem3.c + +mem5.lo: $(TOP)/src/mem5.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mem5.c + +memjournal.lo: $(TOP)/src/memjournal.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/memjournal.c + +mutex.lo: $(TOP)/src/mutex.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mutex.c + +mutex_noop.lo: $(TOP)/src/mutex_noop.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mutex_noop.c + +mutex_unix.lo: $(TOP)/src/mutex_unix.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mutex_unix.c + +mutex_w32.lo: $(TOP)/src/mutex_w32.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/mutex_w32.c + +notify.lo: $(TOP)/src/notify.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/notify.c + +pager.lo: $(TOP)/src/pager.c $(HDR) $(TOP)/src/pager.h + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pager.c + +pcache.lo: $(TOP)/src/pcache.c $(HDR) $(TOP)/src/pcache.h + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pcache.c + +pcache1.lo: $(TOP)/src/pcache1.c $(HDR) $(TOP)/src/pcache.h + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pcache1.c + +os.lo: $(TOP)/src/os.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os.c + +os_unix.lo: $(TOP)/src/os_unix.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os_unix.c + +os_win.lo: $(TOP)/src/os_win.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/os_win.c + +pragma.lo: $(TOP)/src/pragma.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/pragma.c + +prepare.lo: $(TOP)/src/prepare.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/prepare.c + +printf.lo: $(TOP)/src/printf.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/printf.c + +random.lo: $(TOP)/src/random.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/random.c + +resolve.lo: $(TOP)/src/resolve.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/resolve.c + +rowset.lo: $(TOP)/src/rowset.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/rowset.c + +select.lo: $(TOP)/src/select.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/select.c + +status.lo: $(TOP)/src/status.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/status.c + +table.lo: $(TOP)/src/table.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/table.c + +tokenize.lo: $(TOP)/src/tokenize.c keywordhash.h $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/tokenize.c + +trigger.lo: $(TOP)/src/trigger.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/trigger.c + +update.lo: $(TOP)/src/update.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/update.c + +utf.lo: $(TOP)/src/utf.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/utf.c + +util.lo: $(TOP)/src/util.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/util.c + +vacuum.lo: $(TOP)/src/vacuum.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vacuum.c + +vdbe.lo: $(TOP)/src/vdbe.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbe.c + +vdbeapi.lo: $(TOP)/src/vdbeapi.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbeapi.c + +vdbeaux.lo: $(TOP)/src/vdbeaux.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbeaux.c + +vdbeblob.lo: $(TOP)/src/vdbeblob.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbeblob.c + +vdbemem.lo: $(TOP)/src/vdbemem.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbemem.c + +vdbesort.lo: $(TOP)/src/vdbesort.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbesort.c + +vdbetrace.lo: $(TOP)/src/vdbetrace.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vdbetrace.c + +vtab.lo: $(TOP)/src/vtab.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/vtab.c + +wal.lo: $(TOP)/src/wal.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/wal.c + +walker.lo: $(TOP)/src/walker.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/walker.c + +where.lo: $(TOP)/src/where.c $(HDR) + $(LTCOMPILE) $(TEMP_STORE) -c $(TOP)/src/where.c + +tclsqlite.lo: $(TOP)/src/tclsqlite.c $(HDR) + $(LTCOMPILE) -DUSE_TCL_STUBS=1 -c $(TOP)/src/tclsqlite.c + +tclsqlite-shell.lo: $(TOP)/src/tclsqlite.c $(HDR) + $(LTCOMPILE) -DTCLSH=1 -o $@ -c $(TOP)/src/tclsqlite.c + +tclsqlite-stubs.lo: $(TOP)/src/tclsqlite.c $(HDR) + $(LTCOMPILE) -DUSE_TCL_STUBS=1 -o $@ -c $(TOP)/src/tclsqlite.c + +tclsqlite3$(TEXE): tclsqlite-shell.lo libsqlite3.la + $(LTLINK) -o $@ tclsqlite-shell.lo \ + libsqlite3.la $(LIBTCL) + +# Rules to build opcodes.c and opcodes.h +# +opcodes.c: opcodes.h $(TOP)/mkopcodec.awk + $(NAWK) -f $(TOP)/mkopcodec.awk opcodes.h >opcodes.c + +opcodes.h: parse.h $(TOP)/src/vdbe.c $(TOP)/mkopcodeh.awk + cat parse.h $(TOP)/src/vdbe.c | $(NAWK) -f $(TOP)/mkopcodeh.awk >opcodes.h + +# Rules to build parse.c and parse.h - the outputs of lemon. +# +parse.h: parse.c + +parse.c: $(TOP)/src/parse.y lemon$(BEXE) $(TOP)/addopcodes.awk + cp $(TOP)/src/parse.y . + rm -f parse.h + ./lemon$(BEXE) $(OPT_FEATURE_FLAGS) $(OPTS) parse.y + mv parse.h parse.h.temp + $(NAWK) -f $(TOP)/addopcodes.awk parse.h.temp >parse.h + +sqlite3.h: $(TOP)/src/sqlite.h.in $(TOP)/manifest.uuid $(TOP)/VERSION + $(TCLSH_CMD) $(TOP)/tool/mksqlite3h.tcl $(TOP) >sqlite3.h + +keywordhash.h: $(TOP)/tool/mkkeywordhash.c + $(BCC) -o mkkeywordhash$(BEXE) $(OPT_FEATURE_FLAGS) $(OPTS) $(TOP)/tool/mkkeywordhash.c + ./mkkeywordhash$(BEXE) >keywordhash.h + + + +# Rules to build the extension objects. +# +icu.lo: $(TOP)/ext/icu/icu.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/icu/icu.c + +fts2.lo: $(TOP)/ext/fts2/fts2.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2.c + +fts2_hash.lo: $(TOP)/ext/fts2/fts2_hash.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_hash.c + +fts2_icu.lo: $(TOP)/ext/fts2/fts2_icu.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_icu.c + +fts2_porter.lo: $(TOP)/ext/fts2/fts2_porter.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_porter.c + +fts2_tokenizer.lo: $(TOP)/ext/fts2/fts2_tokenizer.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_tokenizer.c + +fts2_tokenizer1.lo: $(TOP)/ext/fts2/fts2_tokenizer1.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts2/fts2_tokenizer1.c + +fts3.lo: $(TOP)/ext/fts3/fts3.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3.c + +fts3_aux.lo: $(TOP)/ext/fts3/fts3_aux.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_aux.c + +fts3_expr.lo: $(TOP)/ext/fts3/fts3_expr.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_expr.c + +fts3_hash.lo: $(TOP)/ext/fts3/fts3_hash.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_hash.c + +fts3_icu.lo: $(TOP)/ext/fts3/fts3_icu.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_icu.c + +fts3_porter.lo: $(TOP)/ext/fts3/fts3_porter.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_porter.c + +fts3_snippet.lo: $(TOP)/ext/fts3/fts3_snippet.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_snippet.c + +fts3_tokenizer.lo: $(TOP)/ext/fts3/fts3_tokenizer.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenizer.c + +fts3_tokenizer1.lo: $(TOP)/ext/fts3/fts3_tokenizer1.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenizer1.c + +fts3_tokenize_vtab.lo: $(TOP)/ext/fts3/fts3_tokenize_vtab.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_tokenize_vtab.c + +fts3_unicode.lo: $(TOP)/ext/fts3/fts3_unicode.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_unicode.c + +fts3_unicode2.lo: $(TOP)/ext/fts3/fts3_unicode2.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_unicode2.c + +fts3_write.lo: $(TOP)/ext/fts3/fts3_write.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/fts3/fts3_write.c + +rtree.lo: $(TOP)/ext/rtree/rtree.c $(HDR) $(EXTHDR) + $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)/ext/rtree/rtree.c + + +# Rules to build the 'testfixture' application. +# +# If using the amalgamation, use sqlite3.c directly to build the test +# fixture. Otherwise link against libsqlite3.la. (This distinction is +# necessary because the test fixture requires non-API symbols which are +# hidden when the library is built via the amalgamation). +# +TESTFIXTURE_FLAGS = -DTCLSH=1 -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 +TESTFIXTURE_FLAGS += -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE +TESTFIXTURE_FLAGS += -DBUILD_sqlite + +TESTFIXTURE_SRC0 = $(TESTSRC2) libsqlite3.la +TESTFIXTURE_SRC1 = sqlite3.c +TESTFIXTURE_SRC = $(TESTSRC) $(TOP)/src/tclsqlite.c +TESTFIXTURE_SRC += $(TESTFIXTURE_SRC$(USE_AMALGAMATION)) + +testfixture$(TEXE): $(TESTFIXTURE_SRC) + $(LTLINK) -DSQLITE_NO_SYNC=1 $(TEMP_STORE) $(TESTFIXTURE_FLAGS) \ + -o $@ $(TESTFIXTURE_SRC) $(LIBTCL) $(TLIBS) + + +fulltest: testfixture$(TEXE) sqlite3$(TEXE) + ./testfixture$(TEXE) $(TOP)/test/all.test + +soaktest: testfixture$(TEXE) sqlite3$(TEXE) + ./testfixture$(TEXE) $(TOP)/test/all.test -soak=1 + +fulltestonly: testfixture$(TEXE) sqlite3$(TEXE) + ./testfixture$(TEXE) $(TOP)/test/full.test + +test: testfixture$(TEXE) sqlite3$(TEXE) + ./testfixture$(TEXE) $(TOP)/test/veryquick.test + +sqlite3_analyzer.c: sqlite3.c $(TOP)/src/test_stat.c $(TOP)/src/tclsqlite.c $(TOP)/tool/spaceanal.tcl + echo "#define TCLSH 2" > $@ + cat sqlite3.c $(TOP)/src/test_stat.c $(TOP)/src/tclsqlite.c >> $@ + echo "static const char *tclsh_main_loop(void){" >> $@ + echo "static const char *zMainloop = " >> $@ + $(NAWK) -f $(TOP)/tool/tostr.awk $(TOP)/tool/spaceanal.tcl >> $@ + echo "; return zMainloop; }" >> $@ + +sqlite3_analyzer$(TEXE): sqlite3_analyzer.c + $(LTLINK) sqlite3_analyzer.c -o $@ $(LIBTCL) $(TLIBS) + +# Standard install and cleanup targets +# +lib_install: libsqlite3.la + $(INSTALL) -d $(DESTDIR)$(libdir) + $(LTINSTALL) libsqlite3.la $(DESTDIR)$(libdir) + +install: sqlite3$(BEXE) lib_install sqlite3.h sqlite3.pc ${HAVE_TCL:1=tcl_install} + $(INSTALL) -d $(DESTDIR)$(bindir) + $(LTINSTALL) sqlite3$(BEXE) $(DESTDIR)$(bindir) + $(INSTALL) -d $(DESTDIR)$(includedir) + $(INSTALL) -m 0644 sqlite3.h $(DESTDIR)$(includedir) + $(INSTALL) -m 0644 $(TOP)/src/sqlite3ext.h $(DESTDIR)$(includedir) + $(INSTALL) -d $(DESTDIR)$(pkgconfigdir) + $(INSTALL) -m 0644 sqlite3.pc $(DESTDIR)$(pkgconfigdir) + +pkgIndex.tcl: + echo 'package ifneeded sqlite3 $(RELEASE) [list load $(TCLLIBDIR)/libtclsqlite3.so sqlite3]' > $@ +tcl_install: lib_install libtclsqlite3.la pkgIndex.tcl + $(INSTALL) -d $(DESTDIR)$(TCLLIBDIR) + $(LTINSTALL) libtclsqlite3.la $(DESTDIR)$(TCLLIBDIR) + rm -f $(DESTDIR)$(TCLLIBDIR)/libtclsqlite3.la $(DESTDIR)$(TCLLIBDIR)/libtclsqlite3.a + $(INSTALL) -m 0644 pkgIndex.tcl $(DESTDIR)$(TCLLIBDIR) + +clean: + rm -f *.lo *.la *.o sqlite3$(TEXE) libsqlite3.la + rm -f sqlite3.h opcodes.* + rm -rf .libs .deps + rm -f lemon$(BEXE) lempar.c parse.* sqlite*.tar.gz + rm -f mkkeywordhash$(BEXE) keywordhash.h + rm -f *.da *.bb *.bbg gmon.out + rm -rf quota2a quota2b quota2c + rm -rf tsrc .target_source + rm -f tclsqlite3$(TEXE) + rm -f testfixture$(TEXE) test.db + rm -f sqlite3.dll sqlite3.lib sqlite3.exp sqlite3.def + rm -f sqlite3.c + rm -f sqlite3rc.h + rm -f shell.c sqlite3ext.h + rm -f sqlite3_analyzer$(TEXE) sqlite3_analyzer.c + rm -f sqlite-*-output.vsix + rm -f mptester mptester.exe + +distclean: clean + rm -f config.log config.status libtool Makefile sqlite3.pc + +# +# Windows section +# +dll: sqlite3.dll + +REAL_LIBOBJ = $(LIBOBJ:%.lo=.libs/%.o) + +$(REAL_LIBOBJ): $(LIBOBJ) + +sqlite3.def: $(REAL_LIBOBJ) + echo 'EXPORTS' >sqlite3.def + nm $(REAL_LIBOBJ) | grep ' T ' | grep ' _sqlite3_' \ + | sed 's/^.* _//' >>sqlite3.def + +sqlite3.dll: $(REAL_LIBOBJ) sqlite3.def + $(TCC) -shared -o $@ sqlite3.def \ + -Wl,"--strip-all" $(REAL_LIBOBJ) diff --git a/components/external/SQLite-3.8.1/make/config.h b/components/external/SQLite-3.8.1/make/config.h new file mode 100644 index 0000000000..f08f500280 --- /dev/null +++ b/components/external/SQLite-3.8.1/make/config.h @@ -0,0 +1,114 @@ +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the <dlfcn.h> header file. */ +/* #undef HAVE_DLFCN_H */ + +/* Define to 1 if you have the `fdatasync' function. */ +/* #undef HAVE_FDATASYNC */ + +/* Define to 1 if you have the `gmtime_r' function. */ +#define HAVE_GMTIME_R 1 + +/* Define to 1 if the system has the type `int16_t'. */ +#define HAVE_INT16_T 1 + +/* Define to 1 if the system has the type `int32_t'. */ +#define HAVE_INT32_T 1 + +/* Define to 1 if the system has the type `int64_t'. */ +#define HAVE_INT64_T 1 + +/* Define to 1 if the system has the type `int8_t'. */ +#define HAVE_INT8_T 1 + +/* Define to 1 if the system has the type `intptr_t'. */ +#define HAVE_INTPTR_T 1 + +/* Define to 1 if you have the <inttypes.h> header file. */ +#define HAVE_INTTYPES_H 1 + +/* Define to 1 if you have the `localtime_r' function. */ +#define HAVE_LOCALTIME_R 1 + +/* Define to 1 if you have the `localtime_s' function. */ +/* #undef HAVE_LOCALTIME_S */ + +/* Define to 1 if you have the <malloc.h> header file. */ +#define HAVE_MALLOC_H 1 + +/* Define to 1 if you have the `malloc_usable_size' function. */ +#define HAVE_MALLOC_USABLE_SIZE 1 + +/* Define to 1 if you have the <memory.h> header file. */ +/* #undef HAVE_MEMORY_H */ + +/* Define to 1 if you have the <stdint.h> header file. */ +#define HAVE_STDINT_H 1 + +/* Define to 1 if you have the <stdlib.h> header file. */ +#define HAVE_STDLIB_H 1 + +/* Define to 1 if you have the <strings.h> header file. */ +/* #undef HAVE_STRINGS_H */ + +/* Define to 1 if you have the <string.h> header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#define HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the <sys/types.h> header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if the system has the type `uint16_t'. */ +#define HAVE_UINT16_T 1 + +/* Define to 1 if the system has the type `uint32_t'. */ +#define HAVE_UINT32_T 1 + +/* Define to 1 if the system has the type `uint64_t'. */ +#define HAVE_UINT64_T 1 + +/* Define to 1 if the system has the type `uint8_t'. */ +#define HAVE_UINT8_T 1 + +/* Define to 1 if the system has the type `uintptr_t'. */ +#define HAVE_UINTPTR_T 1 + +/* Define to 1 if you have the <unistd.h> header file. */ +#define HAVE_UNISTD_H 1 + +/* Define to 1 if you have the `usleep' function. */ +/* #undef HAVE_USLEEP */ + +/* Define to 1 if you have the utime() library function. */ +/* #undef HAVE_UTIME */ + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#define LT_OBJDIR ".libs/" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "sqlite" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "sqlite 3.8.1" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "sqlite" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "3.8.1" + +/* Define to 1 if you have the ANSI C header files. */ +#define STDC_HEADERS 1 + +/* Number of bits in a file offset, on hosts where this is settable. */ +/* #undef _FILE_OFFSET_BITS */ + +/* Define for large files, on AIX-style hosts. */ +/* #undef _LARGE_FILES */ diff --git a/components/external/SQLite-3.8.1/make/config.log b/components/external/SQLite-3.8.1/make/config.log new file mode 100644 index 0000000000..b16dfa8b86 --- /dev/null +++ b/components/external/SQLite-3.8.1/make/config.log @@ -0,0 +1,2646 @@ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by sqlite configure 3.8.1, which was +generated by GNU Autoconf 2.62. Invocation command line was + + $ ../configure --host=arm-none-eabi + +## --------- ## +## Platform. ## +## --------- ## + +hostname = geniuscode +uname -m = i686 +uname -r = 1.7.25(0.270/5/3) +uname -s = CYGWIN_NT-6.1 +uname -v = 2013-08-31 20:39 + +/usr/bin/uname -p = unknown +/bin/uname -X = unknown + +/bin/arch = i686 +/usr/bin/arch -k = unknown +/usr/convex/getsysinfo = unknown +/usr/bin/hostinfo = unknown +/bin/machine = unknown +/usr/bin/oslevel = unknown +/bin/universe = unknown + +PATH: /usr/local/bin +PATH: /usr/bin +PATH: /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin +PATH: /cygdrive/c/Windows/system32 +PATH: /cygdrive/c/Windows +PATH: /cygdrive/c/Windows/System32/Wbem +PATH: /cygdrive/c/Windows/System32/WindowsPowerShell/v1.0 +PATH: /cygdrive/c/Program Files/CodeBlocks/MinGW/bin +PATH: . +PATH: /cygdrive/c/Program Files/Git/cmd +PATH: /cygdrive/c/Program Files/Git/bin +PATH: /cygdrive/c/Python27 +PATH: /cygdrive/c/Python27/Lib +PATH: /cygdrive/c/Python27/Scripts +PATH: /cygdrive/c/Program Files/TortoiseGit/bin +PATH: . + + +## ----------- ## +## Core tests. ## +## ----------- ## + +configure:2129: checking build system type +configure:2147: result: i686-pc-cygwin +configure:2169: checking host system type +configure:2184: result: arm-none-eabi +configure:2214: checking for arm-none-eabi-gcc +configure:2230: found /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-gcc +configure:2241: result: arm-none-eabi-gcc +configure:2519: checking for C compiler version +configure:2527: arm-none-eabi-gcc --version >&5 +arm-none-eabi-gcc.exe (Sourcery CodeBench Lite 2012.03-56) 4.6.3 +Copyright (C) 2011 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +configure:2531: $? = 0 +configure:2538: arm-none-eabi-gcc -v >&5 +Using built-in specs. +COLLECT_GCC=C:\Program Files\CodeSourcery\Sourcery_CodeBench_Lite_for_ARM_EABI\bin\arm-none-eabi-gcc.exe +COLLECT_LTO_WRAPPER=c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../libexec/gcc/arm-none-eabi/4.6.3/lto-wrapper.exe +Target: arm-none-eabi +Configured with: /scratch/nsidwell/arm/eabi/src/gcc-4.6-2012.03/configure --build=i686-pc-linux-gnu --host=i686-mingw32 --target=arm-none-eabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxxlite-multilibs --with-gnu-as --with-gnu-ld --with-specs='%{save-temps: -fverbose-asm} -D__CS_SOURCERYGXX_MAJ__=2012 -D__CS_SOURCERYGXX_MIN__=3 -D__CS_SOURCERYGXX_REV__=56 %{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --disable-shared --enable-lto --with-newlib --with-pkgversion='Sourcery CodeBench Lite 2012.03-56' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-headers=yes --with-sysroot=/opt/codesourcery/arm-none-eabi --with-build-sysroot=/scratch/nsidwell/arm/eabi/install/host-i686-mingw32/arm-none-eabi --with-libiconv-prefix=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --with-gmp=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --with-mpfr=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --with-mpc=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --with-ppl=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --with-libelf=/scratch/nsidwell/arm/eabi/obj/host-libs-2012.03-56-arm-none-eabi-i686-mingw32/usr --disable-libgomp --enable-poison-system-directories --with-build-time-tools=/scratch/nsidwell/arm/eabi/obj/tools-i686-pc-linux-gnu-2012.03-56-arm-none-eabi-i686-mingw32/arm-none-eabi/bin --with-build-time-tools=/scratch/nsidwell/arm/eabi/obj/tools-i686-pc-linux-gnu-2012.03-56-arm-none-eabi-i686-mingw32/arm-none-eabi/bin +Thread model: single +gcc version 4.6.3 (Sourcery CodeBench Lite 2012.03-56) +configure:2542: $? = 0 +configure:2549: arm-none-eabi-gcc -V >&5 +arm-none-eabi-gcc.exe: error: unrecognized option '-V' +arm-none-eabi-gcc.exe: fatal error: no input files +compilation terminated. +configure:2553: $? = 1 +configure:2576: checking for C compiler default output file name +configure:2598: arm-none-eabi-gcc conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +configure:2602: $? = 0 +configure:2640: result: a.out +configure:2657: checking whether the C compiler works +configure:2667: ./a.out +../configure: line 2669: ./a.out: cannot execute binary file +configure:2671: $? = 126 +configure:2688: result: yes +configure:2695: checking whether we are cross compiling +configure:2697: result: yes +configure:2700: checking for suffix of executables +configure:2707: arm-none-eabi-gcc -o conftest conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +configure:2711: $? = 0 +configure:2735: result: +configure:2741: checking for suffix of object files +configure:2767: arm-none-eabi-gcc -c conftest.c >&5 +configure:2771: $? = 0 +configure:2794: result: o +configure:2798: checking whether we are using the GNU C compiler +configure:2827: arm-none-eabi-gcc -c conftest.c >&5 +configure:2834: $? = 0 +configure:2851: result: yes +configure:2860: checking whether arm-none-eabi-gcc accepts -g +configure:2890: arm-none-eabi-gcc -c -g conftest.c >&5 +configure:2897: $? = 0 +configure:2998: result: yes +configure:3015: checking for arm-none-eabi-gcc option to accept ISO C89 +configure:3089: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:3096: $? = 0 +configure:3119: result: none needed +configure:3137: checking for a sed that does not truncate output +configure:3203: result: /usr/bin/sed +configure:3221: checking for grep that handles long lines and -e +configure:3281: result: /usr/bin/grep +configure:3286: checking for egrep +configure:3350: result: /usr/bin/grep -E +configure:3355: checking for fgrep +configure:3419: result: /usr/bin/grep -F +configure:3454: checking for ld used by arm-none-eabi-gcc +configure:3521: result: c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe +configure:3530: checking if the linker (c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe) is GNU ld +configure:3545: result: no +configure:3557: checking for BSD- or MS-compatible name lister (nm) +configure:3606: result: /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B +configure:3728: checking the name lister (/cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B) interface +configure:3735: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:3738: /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B "conftest.o" +../configure: line 3739: /cygdrive/c/Program: No such file or directory +configure:3741: output +configure:3748: result: BSD nm +configure:3751: checking whether ln -s works +configure:3755: result: yes +configure:3763: checking the maximum length of command line arguments +configure:3883: result: 8192 +configure:3900: checking whether the shell understands some XSI constructs +configure:3910: result: yes +configure:3914: checking whether the shell understands "+=" +configure:3920: result: yes +configure:3955: checking for c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe option to reload object files +configure:3962: result: -r +configure:3991: checking for arm-none-eabi-objdump +configure:4007: found /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-objdump +configure:4018: result: arm-none-eabi-objdump +configure:4094: checking how to recognize dependent libraries +configure:4290: result: unknown +configure:4310: checking for arm-none-eabi-ar +configure:4326: found /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-ar +configure:4337: result: arm-none-eabi-ar +configure:4419: checking for arm-none-eabi-strip +configure:4435: found /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-strip +configure:4446: result: arm-none-eabi-strip +configure:4522: checking for arm-none-eabi-ranlib +configure:4538: found /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-ranlib +configure:4549: result: arm-none-eabi-ranlib +configure:4683: checking command to parse /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B output from arm-none-eabi-gcc object +configure:4801: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:4804: $? = 0 +configure:4808: /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B conftest.o \| sed -n -e 's/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm +../configure: line 4809: /cygdrive/c/Program: No such file or directory +configure:4811: $? = 0 +cannot run sed -n -e 's/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' +configure:4801: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:4804: $? = 0 +configure:4808: /cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B conftest.o \| sed -n -e 's/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p' \> conftest.nm +../configure: line 4809: /cygdrive/c/Program: No such file or directory +configure:4811: $? = 0 +cannot run sed -n -e 's/^.*[ ]\([BCDEGRST][BCDEGRST]*\)[ ][ ]*_\([_A-Za-z][_A-Za-z0-9]*\)$/\1 _\2 \2/p' +configure:4903: result: failed +configure:5793: checking how to run the C preprocessor +configure:5833: arm-none-eabi-gcc -E conftest.c +configure:5840: $? = 0 +configure:5871: arm-none-eabi-gcc -E conftest.c +conftest.c:8:28: fatal error: ac_nonexistent.h: No such file or directory +compilation terminated. +configure:5878: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| /* end confdefs.h. */ +| #include <ac_nonexistent.h> +configure:5911: result: arm-none-eabi-gcc -E +configure:5940: arm-none-eabi-gcc -E conftest.c +configure:5947: $? = 0 +configure:5978: arm-none-eabi-gcc -E conftest.c +conftest.c:8:28: fatal error: ac_nonexistent.h: No such file or directory +compilation terminated. +configure:5985: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| /* end confdefs.h. */ +| #include <ac_nonexistent.h> +configure:6023: checking for ANSI C header files +configure:6053: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6060: $? = 0 +configure:6191: result: yes +configure:6215: checking for sys/types.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6215: checking for sys/stat.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6215: checking for stdlib.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6215: checking for string.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6215: checking for memory.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:47:20: fatal error: memory.h: No such file or directory +compilation terminated. +configure:6243: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| +| #include <memory.h> +configure:6260: result: no +configure:6215: checking for strings.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:47:21: fatal error: strings.h: No such file or directory +compilation terminated. +configure:6243: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| +| #include <strings.h> +configure:6260: result: no +configure:6215: checking for inttypes.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6215: checking for stdint.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6215: checking for unistd.h +configure:6236: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:6243: $? = 0 +configure:6260: result: yes +configure:6277: checking for dlfcn.h +configure:6298: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:50:19: fatal error: dlfcn.h: No such file or directory +compilation terminated. +configure:6305: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| +| #include <dlfcn.h> +configure:6322: result: no +configure:6507: checking for objdir +configure:6522: result: .libs +configure:6814: checking if arm-none-eabi-gcc supports -fno-rtti -fno-exceptions +configure:6832: arm-none-eabi-gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5 +cc1.exe: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default] +configure:6836: $? = 0 +configure:6849: result: no +configure:6869: checking for arm-none-eabi-gcc option to produce PIC +configure:7141: result: -fPIC -DPIC +configure:7153: checking if arm-none-eabi-gcc PIC flag -fPIC -DPIC works +configure:7171: arm-none-eabi-gcc -c -g -O2 -fPIC -DPIC -DPIC conftest.c >&5 +configure:7175: $? = 0 +configure:7188: result: yes +configure:7212: checking if arm-none-eabi-gcc static flag -static works +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +configure:7240: result: yes +configure:7255: checking if arm-none-eabi-gcc supports -c -o file.o +configure:7276: arm-none-eabi-gcc -c -g -O2 -o out/conftest2.o conftest.c >&5 +configure:7280: $? = 0 +configure:7302: result: yes +configure:7310: checking if arm-none-eabi-gcc supports -c -o file.o +configure:7357: result: yes +configure:7390: checking whether the arm-none-eabi-gcc linker (c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe) supports shared libraries +configure:8464: result: no +configure:8703: checking dynamic linker characteristics +configure:9399: result: no +configure:9501: checking how to hardcode library paths into programs +configure:9526: result: unsupported +configure:10359: checking whether stripping libraries is possible +configure:10364: result: yes +configure:10399: checking if libtool supports shared libraries +configure:10401: result: no +configure:10404: checking whether to build shared libraries +configure:10425: result: no +configure:10428: checking whether to build static libraries +configure:10432: result: yes +configure:10481: checking for a BSD-compatible install +configure:10549: result: /usr/bin/install -c +configure:10564: checking for gawk +configure:10580: found /usr/bin/gawk +configure:10591: result: gawk +configure:10613: checking for special C compiler options needed for large files +configure:10708: result: no +configure:10714: checking for _FILE_OFFSET_BITS value needed for large files +configure:10749: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:23:3: warning: left shift count >= width of type [enabled by default] +conftest.c:23:3: warning: left shift count >= width of type [enabled by default] +conftest.c:24:10: warning: left shift count >= width of type [enabled by default] +conftest.c:24:10: warning: left shift count >= width of type [enabled by default] +conftest.c:23:7: error: size of array 'off_t_is_large' is negative +conftest.c:25:9: warning: variably modified 'off_t_is_large' at file scope [enabled by default] +configure:10756: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| /* end confdefs.h. */ +| #include <sys/types.h> +| /* Check that off_t can represent 2**63 - 1 correctly. +| We can't simply define LARGE_OFF_T to be 9223372036854775807, +| since some C++ compilers masquerading as C compilers +| incorrectly reject 9223372036854775807. */ +| #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +| int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 +| && LARGE_OFF_T % 2147483647 == 1) +| ? 1 : -1]; +| int +| main () +| { +| +| ; +| return 0; +| } +configure:10800: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:24:3: warning: left shift count >= width of type [enabled by default] +conftest.c:24:3: warning: left shift count >= width of type [enabled by default] +conftest.c:25:10: warning: left shift count >= width of type [enabled by default] +conftest.c:25:10: warning: left shift count >= width of type [enabled by default] +conftest.c:24:7: error: size of array 'off_t_is_large' is negative +conftest.c:26:9: warning: variably modified 'off_t_is_large' at file scope [enabled by default] +configure:10807: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| /* end confdefs.h. */ +| #define _FILE_OFFSET_BITS 64 +| #include <sys/types.h> +| /* Check that off_t can represent 2**63 - 1 correctly. +| We can't simply define LARGE_OFF_T to be 9223372036854775807, +| since some C++ compilers masquerading as C compilers +| incorrectly reject 9223372036854775807. */ +| #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +| int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 +| && LARGE_OFF_T % 2147483647 == 1) +| ? 1 : -1]; +| int +| main () +| { +| +| ; +| return 0; +| } +configure:10825: result: unknown +configure:10837: checking for _LARGE_FILES value needed for large files +configure:10872: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:23:3: warning: left shift count >= width of type [enabled by default] +conftest.c:23:3: warning: left shift count >= width of type [enabled by default] +conftest.c:24:10: warning: left shift count >= width of type [enabled by default] +conftest.c:24:10: warning: left shift count >= width of type [enabled by default] +conftest.c:23:7: error: size of array 'off_t_is_large' is negative +conftest.c:25:9: warning: variably modified 'off_t_is_large' at file scope [enabled by default] +configure:10879: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| /* end confdefs.h. */ +| #include <sys/types.h> +| /* Check that off_t can represent 2**63 - 1 correctly. +| We can't simply define LARGE_OFF_T to be 9223372036854775807, +| since some C++ compilers masquerading as C compilers +| incorrectly reject 9223372036854775807. */ +| #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +| int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 +| && LARGE_OFF_T % 2147483647 == 1) +| ? 1 : -1]; +| int +| main () +| { +| +| ; +| return 0; +| } +configure:10923: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c:24:3: warning: left shift count >= width of type [enabled by default] +conftest.c:24:3: warning: left shift count >= width of type [enabled by default] +conftest.c:25:10: warning: left shift count >= width of type [enabled by default] +conftest.c:25:10: warning: left shift count >= width of type [enabled by default] +conftest.c:24:7: error: size of array 'off_t_is_large' is negative +conftest.c:26:9: warning: variably modified 'off_t_is_large' at file scope [enabled by default] +configure:10930: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| /* end confdefs.h. */ +| #define _LARGE_FILES 1 +| #include <sys/types.h> +| /* Check that off_t can represent 2**63 - 1 correctly. +| We can't simply define LARGE_OFF_T to be 9223372036854775807, +| since some C++ compilers masquerading as C compilers +| incorrectly reject 9223372036854775807. */ +| #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) +| int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 +| && LARGE_OFF_T % 2147483647 == 1) +| ? 1 : -1]; +| int +| main () +| { +| +| ; +| return 0; +| } +configure:10948: result: unknown +configure:10965: checking for int8_t +configure:10993: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11000: $? = 0 +configure:11027: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:53:21: error: expected expression before ')' token +configure:11034: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((int8_t))) +| return 0; +| ; +| return 0; +| } +configure:11057: result: yes +configure:11067: checking for int16_t +configure:11095: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11102: $? = 0 +configure:11129: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:54:22: error: expected expression before ')' token +configure:11136: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((int16_t))) +| return 0; +| ; +| return 0; +| } +configure:11159: result: yes +configure:11169: checking for int32_t +configure:11197: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11204: $? = 0 +configure:11231: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:55:22: error: expected expression before ')' token +configure:11238: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((int32_t))) +| return 0; +| ; +| return 0; +| } +configure:11261: result: yes +configure:11271: checking for int64_t +configure:11299: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11306: $? = 0 +configure:11333: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:56:22: error: expected expression before ')' token +configure:11340: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((int64_t))) +| return 0; +| ; +| return 0; +| } +configure:11363: result: yes +configure:11373: checking for intptr_t +configure:11401: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11408: $? = 0 +configure:11435: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:57:23: error: expected expression before ')' token +configure:11442: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((intptr_t))) +| return 0; +| ; +| return 0; +| } +configure:11465: result: yes +configure:11475: checking for uint8_t +configure:11503: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11510: $? = 0 +configure:11537: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:58:22: error: expected expression before ')' token +configure:11544: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((uint8_t))) +| return 0; +| ; +| return 0; +| } +configure:11567: result: yes +configure:11577: checking for uint16_t +configure:11605: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11612: $? = 0 +configure:11639: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:59:23: error: expected expression before ')' token +configure:11646: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((uint16_t))) +| return 0; +| ; +| return 0; +| } +configure:11669: result: yes +configure:11679: checking for uint32_t +configure:11707: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11714: $? = 0 +configure:11741: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:60:23: error: expected expression before ')' token +configure:11748: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((uint32_t))) +| return 0; +| ; +| return 0; +| } +configure:11771: result: yes +configure:11781: checking for uint64_t +configure:11809: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11816: $? = 0 +configure:11843: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:61:23: error: expected expression before ')' token +configure:11850: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((uint64_t))) +| return 0; +| ; +| return 0; +| } +configure:11873: result: yes +configure:11883: checking for uintptr_t +configure:11911: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:11918: $? = 0 +configure:11945: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +conftest.c: In function 'main': +conftest.c:62:24: error: expected expression before ')' token +configure:11952: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| int +| main () +| { +| if (sizeof ((uintptr_t))) +| return 0; +| ; +| return 0; +| } +configure:11975: result: yes +configure:11998: checking for sys/types.h +configure:12005: result: yes +configure:11998: checking for stdlib.h +configure:12005: result: yes +configure:11998: checking for stdint.h +configure:12005: result: yes +configure:11998: checking for inttypes.h +configure:12005: result: yes +configure:12009: checking malloc.h usability +configure:12026: arm-none-eabi-gcc -c -g -O2 conftest.c >&5 +configure:12033: $? = 0 +configure:12047: result: yes +configure:12051: checking malloc.h presence +configure:12066: arm-none-eabi-gcc -E conftest.c +configure:12073: $? = 0 +configure:12087: result: yes +configure:12115: checking for malloc.h +configure:12124: result: yes +configure:12152: checking for usleep +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\ccmfmFhK.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:66: undefined reference to `usleep' +collect2: ld returned 1 exit status +configure:12215: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| /* end confdefs.h. */ +| /* Define usleep to an innocuous variant, in case <limits.h> declares usleep. +| For example, HP-UX 11i <limits.h> declares gettimeofday. */ +| #define usleep innocuous_usleep +| +| /* System header to define __stub macros and hopefully few prototypes, +| which can conflict with char usleep (); below. +| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since +| <limits.h> exists even on freestanding compilers. */ +| +| #ifdef __STDC__ +| # include <limits.h> +| #else +| # include <assert.h> +| #endif +| +| #undef usleep +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char usleep (); +| /* The GNU C library defines this for functions which it implements +| to always fail with ENOSYS. Some functions are actually named +| something starting with __ and the normal name is an alias. */ +| #if defined __stub_usleep || defined __stub___usleep +| choke me +| #endif +| +| int +| main () +| { +| return usleep (); +| ; +| return 0; +| } +configure:12237: result: no +configure:12152: checking for fdatasync +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\ccIA003u.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:66: undefined reference to `fdatasync' +collect2: ld returned 1 exit status +configure:12215: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| /* end confdefs.h. */ +| /* Define fdatasync to an innocuous variant, in case <limits.h> declares fdatasync. +| For example, HP-UX 11i <limits.h> declares gettimeofday. */ +| #define fdatasync innocuous_fdatasync +| +| /* System header to define __stub macros and hopefully few prototypes, +| which can conflict with char fdatasync (); below. +| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since +| <limits.h> exists even on freestanding compilers. */ +| +| #ifdef __STDC__ +| # include <limits.h> +| #else +| # include <assert.h> +| #endif +| +| #undef fdatasync +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char fdatasync (); +| /* The GNU C library defines this for functions which it implements +| to always fail with ENOSYS. Some functions are actually named +| something starting with __ and the normal name is an alias. */ +| #if defined __stub_fdatasync || defined __stub___fdatasync +| choke me +| #endif +| +| int +| main () +| { +| return fdatasync (); +| ; +| return 0; +| } +configure:12237: result: no +configure:12152: checking for localtime_r +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +configure:12215: $? = 0 +configure:12237: result: yes +configure:12152: checking for gmtime_r +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +configure:12215: $? = 0 +configure:12237: result: yes +configure:12152: checking for localtime_s +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\ccQgpJ1T.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:68: undefined reference to `localtime_s' +collect2: ld returned 1 exit status +configure:12215: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| /* end confdefs.h. */ +| /* Define localtime_s to an innocuous variant, in case <limits.h> declares localtime_s. +| For example, HP-UX 11i <limits.h> declares gettimeofday. */ +| #define localtime_s innocuous_localtime_s +| +| /* System header to define __stub macros and hopefully few prototypes, +| which can conflict with char localtime_s (); below. +| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since +| <limits.h> exists even on freestanding compilers. */ +| +| #ifdef __STDC__ +| # include <limits.h> +| #else +| # include <assert.h> +| #endif +| +| #undef localtime_s +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char localtime_s (); +| /* The GNU C library defines this for functions which it implements +| to always fail with ENOSYS. Some functions are actually named +| something starting with __ and the normal name is an alias. */ +| #if defined __stub_localtime_s || defined __stub___localtime_s +| choke me +| #endif +| +| int +| main () +| { +| return localtime_s (); +| ; +| return 0; +| } +configure:12237: result: no +configure:12152: checking for utime +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\cc43rkMv.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:68: undefined reference to `utime' +collect2: ld returned 1 exit status +configure:12215: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| /* end confdefs.h. */ +| /* Define utime to an innocuous variant, in case <limits.h> declares utime. +| For example, HP-UX 11i <limits.h> declares gettimeofday. */ +| #define utime innocuous_utime +| +| /* System header to define __stub macros and hopefully few prototypes, +| which can conflict with char utime (); below. +| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since +| <limits.h> exists even on freestanding compilers. */ +| +| #ifdef __STDC__ +| # include <limits.h> +| #else +| # include <assert.h> +| #endif +| +| #undef utime +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char utime (); +| /* The GNU C library defines this for functions which it implements +| to always fail with ENOSYS. Some functions are actually named +| something starting with __ and the normal name is an alias. */ +| #if defined __stub_utime || defined __stub___utime +| choke me +| #endif +| +| int +| main () +| { +| return utime (); +| ; +| return 0; +| } +configure:12237: result: no +configure:12152: checking for malloc_usable_size +configure:12208: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +configure:12215: $? = 0 +configure:12237: result: yes +configure:12263: checking for tclsh8.6 +configure:12293: result: no +configure:12263: checking for tclsh8.5 +configure:12279: found /usr/bin/tclsh8.5 +configure:12290: result: tclsh8.5 +configure:12331: Version set to 3.8 +configure:12335: Release set to 3.8.1 +configure:12341: Version number set to 3008001 +configure:12397: checking for gcc +configure:12413: found /usr/bin/gcc +configure:12424: result: gcc +configure:12452: checking whether to support threadsafe operation +configure:12460: result: yes +configure:12466: checking for library containing pthread_create +configure:12507: arm-none-eabi-gcc -o conftest -g -O2 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\ccucoypj.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:46: undefined reference to `pthread_create' +collect2: ld returned 1 exit status +configure:12514: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char pthread_create (); +| int +| main () +| { +| return pthread_create (); +| ; +| return 0; +| } +configure:12507: arm-none-eabi-gcc -o conftest -g -O2 conftest.c -lpthread >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -lpthread +collect2: ld returned 1 exit status +configure:12514: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char pthread_create (); +| int +| main () +| { +| return pthread_create (); +| ; +| return 0; +| } +configure:12545: result: no +configure:12567: checking whether to allow connections to be shared across threads +configure:12571: result: no +configure:12590: checking whether to support shared library linked as release mode or not +configure:12594: result: no +configure:12613: checking whether to use an in-ram database for temporary tables +configure:12623: result: no +configure:12650: checking if executables have the .exe suffix +configure:12657: result: unknown +configure:12661: checking host system type +configure:12676: result: arm-none-eabi +configure:12751: checking for Tcl configuration +configure:12847: result: found /usr/lib/tclConfig.sh +configure:12850: checking for existence of /usr/lib/tclConfig.sh +configure:12853: result: loading +configure:12938: checking for library containing tgetent +configure:12979: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\cc8HgZuF.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:46: undefined reference to `tgetent' +collect2: ld returned 1 exit status +configure:12986: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char tgetent (); +| int +| main () +| { +| return tgetent (); +| ; +| return 0; +| } +configure:12979: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c -lreadline >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -lreadline +collect2: ld returned 1 exit status +configure:12986: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char tgetent (); +| int +| main () +| { +| return tgetent (); +| ; +| return 0; +| } +configure:12979: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c -lncurses >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -lncurses +collect2: ld returned 1 exit status +configure:12986: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char tgetent (); +| int +| main () +| { +| return tgetent (); +| ; +| return 0; +| } +configure:12979: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c -lcurses >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -lcurses +collect2: ld returned 1 exit status +configure:12986: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char tgetent (); +| int +| main () +| { +| return tgetent (); +| ; +| return 0; +| } +configure:12979: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c -ltermcap >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -ltermcap +collect2: ld returned 1 exit status +configure:12986: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char tgetent (); +| int +| main () +| { +| return tgetent (); +| ; +| return 0; +| } +configure:13017: result: no +configure:13027: checking for readline in -lreadline +configure:13062: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c -lreadline >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -lreadline +collect2: ld returned 1 exit status +configure:13069: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char readline (); +| int +| main () +| { +| return readline (); +| ; +| return 0; +| } +configure:13090: result: no +configure:13123: checking readline.h usability +configure:13140: arm-none-eabi-gcc -c -g -O2 -DSQLITE_OS_UNIX=1 conftest.c >&5 +conftest.c:68:22: fatal error: readline.h: No such file or directory +compilation terminated. +configure:13147: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| #include <stdio.h> +| #ifdef HAVE_SYS_TYPES_H +| # include <sys/types.h> +| #endif +| #ifdef HAVE_SYS_STAT_H +| # include <sys/stat.h> +| #endif +| #ifdef STDC_HEADERS +| # include <stdlib.h> +| # include <stddef.h> +| #else +| # ifdef HAVE_STDLIB_H +| # include <stdlib.h> +| # endif +| #endif +| #ifdef HAVE_STRING_H +| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H +| # include <memory.h> +| # endif +| # include <string.h> +| #endif +| #ifdef HAVE_STRINGS_H +| # include <strings.h> +| #endif +| #ifdef HAVE_INTTYPES_H +| # include <inttypes.h> +| #endif +| #ifdef HAVE_STDINT_H +| # include <stdint.h> +| #endif +| #ifdef HAVE_UNISTD_H +| # include <unistd.h> +| #endif +| #include <readline.h> +configure:13161: result: no +configure:13165: checking readline.h presence +configure:13180: arm-none-eabi-gcc -E conftest.c +conftest.c:35:22: fatal error: readline.h: No such file or directory +compilation terminated. +configure:13187: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| #include <readline.h> +configure:13201: result: no +configure:13229: checking for readline.h +configure:13236: result: no +configure:13306: checking for library containing fdatasync +configure:13347: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: warning: cannot find entry symbol _start; defaulting to 00008018 +C:\cygwin\tmp\ccu5x1pj.o: In function `main': +E:\rt-thread\components\external\SQLite-3.8.1\make/conftest.c:46: undefined reference to `fdatasync' +collect2: ld returned 1 exit status +configure:13354: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char fdatasync (); +| int +| main () +| { +| return fdatasync (); +| ; +| return 0; +| } +configure:13347: arm-none-eabi-gcc -o conftest -g -O2 -DSQLITE_OS_UNIX=1 conftest.c -lrt >&5 +c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/bin/../lib/gcc/arm-none-eabi/4.6.3/../../../../arm-none-eabi/bin/ld.exe: cannot find -lrt +collect2: ld returned 1 exit status +configure:13354: $? = 1 +configure: failed program was: +| /* confdefs.h. */ +| #define PACKAGE_NAME "sqlite" +| #define PACKAGE_TARNAME "sqlite" +| #define PACKAGE_VERSION "3.8.1" +| #define PACKAGE_STRING "sqlite 3.8.1" +| #define PACKAGE_BUGREPORT "" +| #define STDC_HEADERS 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_SYS_STAT_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STRING_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_UNISTD_H 1 +| #define LT_OBJDIR ".libs/" +| #define HAVE_INT8_T 1 +| #define HAVE_INT16_T 1 +| #define HAVE_INT32_T 1 +| #define HAVE_INT64_T 1 +| #define HAVE_INTPTR_T 1 +| #define HAVE_UINT8_T 1 +| #define HAVE_UINT16_T 1 +| #define HAVE_UINT32_T 1 +| #define HAVE_UINT64_T 1 +| #define HAVE_UINTPTR_T 1 +| #define HAVE_SYS_TYPES_H 1 +| #define HAVE_STDLIB_H 1 +| #define HAVE_STDINT_H 1 +| #define HAVE_INTTYPES_H 1 +| #define HAVE_MALLOC_H 1 +| #define HAVE_LOCALTIME_R 1 +| #define HAVE_GMTIME_R 1 +| #define HAVE_MALLOC_USABLE_SIZE 1 +| /* end confdefs.h. */ +| +| /* Override any GCC internal prototype to avoid an error. +| Use char because int might match the return type of a GCC +| builtin and then its argument prototype would still apply. */ +| #ifdef __cplusplus +| extern "C" +| #endif +| char fdatasync (); +| int +| main () +| { +| return fdatasync (); +| ; +| return 0; +| } +configure:13385: result: no +configure:13707: creating ./config.status + +## ---------------------- ## +## Running config.status. ## +## ---------------------- ## + +This file was extended by sqlite config.status 3.8.1, which was +generated by GNU Autoconf 2.62. Invocation command line was + + CONFIG_FILES = + CONFIG_HEADERS = + CONFIG_LINKS = + CONFIG_COMMANDS = + $ ./config.status + +on geniuscode + +config.status:995: creating Makefile +config.status:995: creating sqlite3.pc +config.status:995: creating config.h +config.status:1222: executing libtool commands + +## ---------------- ## +## Cache variables. ## +## ---------------- ## + +ac_cv_build=i686-pc-cygwin +ac_cv_c_compiler_gnu=yes +ac_cv_c_tclconfig=/usr/lib +ac_cv_env_CC_set= +ac_cv_env_CC_value= +ac_cv_env_CFLAGS_set= +ac_cv_env_CFLAGS_value= +ac_cv_env_CPPFLAGS_set= +ac_cv_env_CPPFLAGS_value= +ac_cv_env_CPP_set= +ac_cv_env_CPP_value= +ac_cv_env_LDFLAGS_set= +ac_cv_env_LDFLAGS_value= +ac_cv_env_LIBS_set= +ac_cv_env_LIBS_value= +ac_cv_env_TCLLIBDIR_set= +ac_cv_env_TCLLIBDIR_value= +ac_cv_env_build_alias_set= +ac_cv_env_build_alias_value= +ac_cv_env_host_alias_set=set +ac_cv_env_host_alias_value=arm-none-eabi +ac_cv_env_target_alias_set= +ac_cv_env_target_alias_value= +ac_cv_func_fdatasync=no +ac_cv_func_gmtime_r=yes +ac_cv_func_localtime_r=yes +ac_cv_func_localtime_s=no +ac_cv_func_malloc_usable_size=yes +ac_cv_func_usleep=no +ac_cv_func_utime=no +ac_cv_header_dlfcn_h=no +ac_cv_header_inttypes_h=yes +ac_cv_header_malloc_h=yes +ac_cv_header_memory_h=no +ac_cv_header_readline_h=no +ac_cv_header_stdc=yes +ac_cv_header_stdint_h=yes +ac_cv_header_stdlib_h=yes +ac_cv_header_string_h=yes +ac_cv_header_strings_h=no +ac_cv_header_sys_stat_h=yes +ac_cv_header_sys_types_h=yes +ac_cv_header_unistd_h=yes +ac_cv_host=arm-none-eabi +ac_cv_lib_readline_readline=no +ac_cv_objext=o +ac_cv_path_EGREP='/usr/bin/grep -E' +ac_cv_path_FGREP='/usr/bin/grep -F' +ac_cv_path_GREP=/usr/bin/grep +ac_cv_path_SED=/usr/bin/sed +ac_cv_path_install='/usr/bin/install -c' +ac_cv_prog_AR=arm-none-eabi-ar +ac_cv_prog_AWK=gawk +ac_cv_prog_BUILD_CC=gcc +ac_cv_prog_CC=arm-none-eabi-gcc +ac_cv_prog_CPP='arm-none-eabi-gcc -E' +ac_cv_prog_OBJDUMP=arm-none-eabi-objdump +ac_cv_prog_RANLIB=arm-none-eabi-ranlib +ac_cv_prog_STRIP=arm-none-eabi-strip +ac_cv_prog_TCLSH_CMD=tclsh8.5 +ac_cv_prog_cc_c89= +ac_cv_prog_cc_g=yes +ac_cv_search_fdatasync=no +ac_cv_search_pthread_create=no +ac_cv_search_tgetent=no +ac_cv_sys_file_offset_bits=unknown +ac_cv_sys_large_files=unknown +ac_cv_sys_largefile_CC=no +ac_cv_type_int16_t=yes +ac_cv_type_int32_t=yes +ac_cv_type_int64_t=yes +ac_cv_type_int8_t=yes +ac_cv_type_intptr_t=yes +ac_cv_type_uint16_t=yes +ac_cv_type_uint32_t=yes +ac_cv_type_uint64_t=yes +ac_cv_type_uint8_t=yes +ac_cv_type_uintptr_t=yes +lt_cv_deplibs_check_method=unknown +lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_ld_reload_flag=-r +lt_cv_nm_interface='BSD nm' +lt_cv_objdir=.libs +lt_cv_path_LD='c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe' +lt_cv_path_NM='/cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B' +lt_cv_prog_compiler_c_o=yes +lt_cv_prog_compiler_pic_works=yes +lt_cv_prog_compiler_rtti_exceptions=no +lt_cv_prog_compiler_static_works=yes +lt_cv_prog_gnu_ld=no +lt_cv_sys_global_symbol_pipe= +lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' +lt_cv_sys_global_symbol_to_cdecl= +lt_cv_sys_max_cmd_len=8192 + +## ----------------- ## +## Output variables. ## +## ----------------- ## + +ALLOWRELEASE='' +AR='arm-none-eabi-ar' +AWK='gawk' +BUILD_CC='gcc' +BUILD_CFLAGS=' -g' +BUILD_EXEEXT='' +CC='arm-none-eabi-gcc' +CFLAGS=' -g -O2 -DSQLITE_OS_UNIX=1' +CPP='arm-none-eabi-gcc -E' +CPPFLAGS='' +DEFS='-DHAVE_CONFIG_H' +DSYMUTIL='' +DUMPBIN='' +ECHO_C='' +ECHO_N='-n' +ECHO_T='' +EGREP='/usr/bin/grep -E' +EXEEXT='' +FGREP='/usr/bin/grep -F' +GREP='/usr/bin/grep' +HAVE_TCL='1' +INSTALL_DATA='${INSTALL} -m 644' +INSTALL_PROGRAM='${INSTALL}' +INSTALL_SCRIPT='${INSTALL}' +LD='c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe' +LDFLAGS='' +LIBOBJS='' +LIBS='' +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +LIPO='' +LN_S='ln -s' +LTLIBOBJS='' +NM='/cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B' +NMEDIT='' +OBJDUMP='arm-none-eabi-objdump' +OBJEXT='o' +OPT_FEATURE_FLAGS='-DSQLITE_OMIT_LOAD_EXTENSION=1' +OTOOL64='' +OTOOL='' +PACKAGE_BUGREPORT='' +PACKAGE_NAME='sqlite' +PACKAGE_STRING='sqlite 3.8.1' +PACKAGE_TARNAME='sqlite' +PACKAGE_VERSION='3.8.1' +PATH_SEPARATOR=':' +RANLIB='arm-none-eabi-ranlib' +RELEASE='3.8.1' +SED='/usr/bin/sed' +SHELL='/bin/sh' +SQLITE_OS_UNIX='1' +SQLITE_OS_WIN='0' +SQLITE_THREADSAFE='1' +STRIP='arm-none-eabi-strip' +TARGET_DEBUG='-DNDEBUG' +TARGET_EXEEXT='' +TARGET_HAVE_READLINE='0' +TARGET_READLINE_INC='' +TARGET_READLINE_LIBS='' +TCLLIBDIR='/usr/lib/tcl8.5/sqlite3' +TCLSH_CMD='tclsh8.5' +TCL_BIN_DIR='/usr/lib' +TCL_INCLUDE_SPEC='-I/usr/include' +TCL_LIB_FILE='libtcl8.5.dll' +TCL_LIB_FLAG='-ltcl8.5' +TCL_LIB_SPEC='-L/usr/lib -ltcl8.5' +TCL_SRC_DIR='/usr/include/tcl8.5' +TCL_STUB_LIB_FILE='libtclstub8.5.a' +TCL_STUB_LIB_FLAG='-ltclstub8.5' +TCL_STUB_LIB_SPEC='-Wl,-ltclstub8.5' +TCL_VERSION='8.5' +TEMP_STORE='1' +USE_AMALGAMATION='1' +USE_GCOV='0' +VERSION='3.8' +VERSION_NUMBER='3008001' +XTHREADCONNECT='' +ac_ct_CC='' +ac_ct_DUMPBIN='' +bindir='${exec_prefix}/bin' +build='i686-pc-cygwin' +build_alias='' +build_cpu='i686' +build_os='cygwin' +build_vendor='pc' +datadir='${datarootdir}' +datarootdir='${prefix}/share' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +dvidir='${docdir}' +exec_prefix='${prefix}' +host='arm-none-eabi' +host_alias='arm-none-eabi' +host_cpu='arm' +host_os='eabi' +host_vendor='none' +htmldir='${docdir}' +includedir='${prefix}/include' +infodir='${datarootdir}/info' +libdir='${exec_prefix}/lib' +libexecdir='${exec_prefix}/libexec' +localedir='${datarootdir}/locale' +localstatedir='${prefix}/var' +lt_ECHO='echo' +mandir='${datarootdir}/man' +oldincludedir='/usr/include' +pdfdir='${docdir}' +prefix='/usr/local' +program_prefix='' +program_transform_name='s,x,x,' +psdir='${docdir}' +sbindir='${exec_prefix}/sbin' +sharedstatedir='${prefix}/com' +sysconfdir='${prefix}/etc' +target_alias='' + +## ----------- ## +## confdefs.h. ## +## ----------- ## + +#define PACKAGE_NAME "sqlite" +#define PACKAGE_TARNAME "sqlite" +#define PACKAGE_VERSION "3.8.1" +#define PACKAGE_STRING "sqlite 3.8.1" +#define PACKAGE_BUGREPORT "" +#define STDC_HEADERS 1 +#define HAVE_SYS_TYPES_H 1 +#define HAVE_SYS_STAT_H 1 +#define HAVE_STDLIB_H 1 +#define HAVE_STRING_H 1 +#define HAVE_INTTYPES_H 1 +#define HAVE_STDINT_H 1 +#define HAVE_UNISTD_H 1 +#define LT_OBJDIR ".libs/" +#define HAVE_INT8_T 1 +#define HAVE_INT16_T 1 +#define HAVE_INT32_T 1 +#define HAVE_INT64_T 1 +#define HAVE_INTPTR_T 1 +#define HAVE_UINT8_T 1 +#define HAVE_UINT16_T 1 +#define HAVE_UINT32_T 1 +#define HAVE_UINT64_T 1 +#define HAVE_UINTPTR_T 1 +#define HAVE_SYS_TYPES_H 1 +#define HAVE_STDLIB_H 1 +#define HAVE_STDINT_H 1 +#define HAVE_INTTYPES_H 1 +#define HAVE_MALLOC_H 1 +#define HAVE_LOCALTIME_R 1 +#define HAVE_GMTIME_R 1 +#define HAVE_MALLOC_USABLE_SIZE 1 + +configure: exit 0 diff --git a/components/external/SQLite-3.8.1/make/config.status b/components/external/SQLite-3.8.1/make/config.status new file mode 100644 index 0000000000..b208fd861b --- /dev/null +++ b/components/external/SQLite-3.8.1/make/config.status @@ -0,0 +1,1869 @@ +#! /bin/sh +# Generated by configure. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=${CONFIG_SHELL-/bin/sh} +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by sqlite $as_me 3.8.1, which was +generated by GNU Autoconf 2.62. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +# Files that config.status was made for. +config_files=" Makefile sqlite3.pc" +config_headers=" config.h" +config_commands=" libtool" + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to <[email protected]>." + +ac_cs_version="\ +sqlite config.status 3.8.1 +configured by ../configure, generated by GNU Autoconf 2.62, + with options \"'--host=arm-none-eabi' 'host_alias=arm-none-eabi'\" + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='/cygdrive/e/rt-thread/components/external/SQLite-3.8.1/make' +srcdir='..' +INSTALL='/usr/bin/install -c' +AWK='gawk' +test -n "$AWK" || AWK=awk +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +if $ac_cs_recheck; then + set X '/bin/sh' '../configure' '--host=arm-none-eabi' 'host_alias=arm-none-eabi' $ac_configure_extra_args --no-create --no-recursion + shift + $as_echo "running CONFIG_SHELL=/bin/sh $*" >&6 + CONFIG_SHELL='/bin/sh' + export CONFIG_SHELL + exec "$@" +fi + +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +# +# INIT-COMMANDS +# + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +double_quote_subst='s/\(["`\\]\)/\\\1/g' +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +macro_version='2.2.6' +macro_revision='1.3012' +enable_shared='no' +enable_static='yes' +pic_mode='default' +enable_fast_install='yes' +host_alias='arm-none-eabi' +host='arm-none-eabi' +host_os='eabi' +build_alias='' +build='i686-pc-cygwin' +build_os='cygwin' +SED='/usr/bin/sed' +Xsed='/usr/bin/sed -e 1s/^X//' +GREP='/usr/bin/grep' +EGREP='/usr/bin/grep -E' +FGREP='/usr/bin/grep -F' +LD='c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe' +NM='/cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B' +LN_S='ln -s' +max_cmd_len='8192' +ac_objext='o' +exeext='' +lt_unset='unset' +lt_SP2NL='tr \040 \012' +lt_NL2SP='tr \015\012 \040\040' +reload_flag=' -r' +reload_cmds='$LD$reload_flag -o $output$reload_objs' +OBJDUMP='arm-none-eabi-objdump' +deplibs_check_method='unknown' +file_magic_cmd='$MAGIC_CMD' +AR='arm-none-eabi-ar' +AR_FLAGS='cru' +STRIP='arm-none-eabi-strip' +RANLIB='arm-none-eabi-ranlib' +old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib' +old_postuninstall_cmds='' +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib' +CC='arm-none-eabi-gcc' +CFLAGS=' -g -O2 -DSQLITE_OS_UNIX=1' +compiler='arm-none-eabi-gcc' +GCC='yes' +lt_cv_sys_global_symbol_pipe='' +lt_cv_sys_global_symbol_to_cdecl='' +lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' +objdir='.libs' +SHELL='/bin/sh' +ECHO='echo' +MAGIC_CMD='file' +lt_prog_compiler_no_builtin_flag=' -fno-builtin' +lt_prog_compiler_wl='-Wl,' +lt_prog_compiler_pic=' -fPIC -DPIC' +lt_prog_compiler_static='-static' +lt_cv_prog_compiler_c_o='yes' +need_locks='no' +DSYMUTIL='' +NMEDIT='' +LIPO='' +OTOOL='' +OTOOL64='' +libext='a' +shrext_cmds='.so' +extract_expsyms_cmds='' +archive_cmds_need_lc='yes' +enable_shared_with_static_runtimes='no' +export_dynamic_flag_spec='' +whole_archive_flag_spec='' +compiler_needs_object='no' +old_archive_from_new_cmds='' +old_archive_from_expsyms_cmds='' +archive_cmds='' +archive_expsym_cmds='' +module_cmds='' +module_expsym_cmds='' +with_gnu_ld='no' +allow_undefined_flag='' +no_undefined_flag='' +hardcode_libdir_flag_spec='' +hardcode_libdir_flag_spec_ld='' +hardcode_libdir_separator='' +hardcode_direct='no' +hardcode_direct_absolute='no' +hardcode_minus_L='no' +hardcode_shlibpath_var='unsupported' +hardcode_automatic='no' +inherit_rpath='no' +link_all_deplibs='unknown' +fix_srcfile_path='' +always_export_symbols='no' +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' +include_expsyms='' +prelink_cmds='' +file_list_spec='' +variables_saved_for_relink='PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH' +need_lib_prefix='unknown' +need_version='unknown' +version_type='none' +runpath_var='' +shlibpath_var='' +shlibpath_overrides_runpath='unknown' +libname_spec='lib$name' +library_names_spec='' +soname_spec='' +postinstall_cmds='' +postuninstall_cmds='' +finish_cmds='' +finish_eval='' +hardcode_into_libs='no' +sys_lib_search_path_spec='' +sys_lib_dlsearch_path_spec='/lib /usr/lib' +hardcode_action='unsupported' +enable_dlopen='unknown' +enable_dlopen_self='unknown' +enable_dlopen_self_static='unknown' +old_striplib='arm-none-eabi-strip --strip-debug' +striplib='arm-none-eabi-strip --strip-unneeded' + +LTCC='arm-none-eabi-gcc' +LTCFLAGS='-g -O2' +compiler='arm-none-eabi-gcc' + +# Quote evaled strings. +for var in SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib; do + case `eval \\$ECHO "X\\$$var"` in + *[\\\`\"\$]*) + eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\$$var\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; do + case `eval \\$ECHO "X\\$$var"` in + *[\\\`\"\$]*) + eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\$$var\\\"" + ;; + esac +done + +# Fix-up fallback echo if it was mangled by the above quoting rules. +case $lt_ECHO in +*'\$0 --fallback-echo"') lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; +esac + +ac_aux_dir='..' +xsi_shell='yes' +lt_shell_append='yes' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='' + VERSION='3.8' + TIMESTAMP='' + RM='rm -f' + ofile='libtool' + + + + + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "sqlite3.pc") CONFIG_FILES="$CONFIG_FILES sqlite3.pc" ;; + + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr='
' +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$tmp/subs1.awk" && +cat >>"$tmp/subs1.awk" <<\_ACAWK && +S["SHELL"]="/bin/sh" +S["PATH_SEPARATOR"]=":" +S["PACKAGE_NAME"]="sqlite" +S["PACKAGE_TARNAME"]="sqlite" +S["PACKAGE_VERSION"]="3.8.1" +S["PACKAGE_STRING"]="sqlite 3.8.1" +S["PACKAGE_BUGREPORT"]="" +S["exec_prefix"]="${prefix}" +S["prefix"]="/usr/local" +S["program_transform_name"]="s,x,x," +S["bindir"]="${exec_prefix}/bin" +S["sbindir"]="${exec_prefix}/sbin" +S["libexecdir"]="${exec_prefix}/libexec" +S["datarootdir"]="${prefix}/share" +S["datadir"]="${datarootdir}" +S["sysconfdir"]="${prefix}/etc" +S["sharedstatedir"]="${prefix}/com" +S["localstatedir"]="${prefix}/var" +S["includedir"]="${prefix}/include" +S["oldincludedir"]="/usr/include" +S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}" +S["infodir"]="${datarootdir}/info" +S["htmldir"]="${docdir}" +S["dvidir"]="${docdir}" +S["pdfdir"]="${docdir}" +S["psdir"]="${docdir}" +S["libdir"]="${exec_prefix}/lib" +S["localedir"]="${datarootdir}/locale" +S["mandir"]="${datarootdir}/man" +S["DEFS"]="-DHAVE_CONFIG_H" +S["ECHO_C"]="" +S["ECHO_N"]="-n" +S["ECHO_T"]="" +S["LIBS"]="" +S["build_alias"]="" +S["host_alias"]="arm-none-eabi" +S["target_alias"]="" +S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool" +S["build"]="i686-pc-cygwin" +S["build_cpu"]="i686" +S["build_vendor"]="pc" +S["build_os"]="cygwin" +S["host"]="arm-none-eabi" +S["host_cpu"]="arm" +S["host_vendor"]="none" +S["host_os"]="eabi" +S["CC"]="arm-none-eabi-gcc" +S["CFLAGS"]=" -g -O2 -DSQLITE_OS_UNIX=1" +S["LDFLAGS"]="" +S["CPPFLAGS"]="" +S["ac_ct_CC"]="" +S["EXEEXT"]="" +S["OBJEXT"]="o" +S["SED"]="/usr/bin/sed" +S["GREP"]="/usr/bin/grep" +S["EGREP"]="/usr/bin/grep -E" +S["FGREP"]="/usr/bin/grep -F" +S["LD"]="c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe" +S["DUMPBIN"]="" +S["ac_ct_DUMPBIN"]="" +S["NM"]="/cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B" +S["LN_S"]="ln -s" +S["OBJDUMP"]="arm-none-eabi-objdump" +S["AR"]="arm-none-eabi-ar" +S["STRIP"]="arm-none-eabi-strip" +S["RANLIB"]="arm-none-eabi-ranlib" +S["lt_ECHO"]="echo" +S["DSYMUTIL"]="" +S["NMEDIT"]="" +S["LIPO"]="" +S["OTOOL"]="" +S["OTOOL64"]="" +S["CPP"]="arm-none-eabi-gcc -E" +S["INSTALL_PROGRAM"]="${INSTALL}" +S["INSTALL_SCRIPT"]="${INSTALL}" +S["INSTALL_DATA"]="${INSTALL} -m 644" +S["AWK"]="gawk" +S["TCLSH_CMD"]="tclsh8.5" +S["TCLLIBDIR"]="/usr/lib/tcl8.5/sqlite3" +S["program_prefix"]="" +S["VERSION"]="3.8" +S["RELEASE"]="3.8.1" +S["VERSION_NUMBER"]="3008001" +S["BUILD_CC"]="gcc" +S["SQLITE_THREADSAFE"]="1" +S["XTHREADCONNECT"]="" +S["ALLOWRELEASE"]="" +S["TEMP_STORE"]="1" +S["BUILD_EXEEXT"]="" +S["SQLITE_OS_UNIX"]="1" +S["SQLITE_OS_WIN"]="0" +S["TARGET_EXEEXT"]="" +S["TCL_VERSION"]="8.5" +S["TCL_BIN_DIR"]="/usr/lib" +S["TCL_SRC_DIR"]="/usr/include/tcl8.5" +S["TCL_INCLUDE_SPEC"]="-I/usr/include" +S["TCL_LIB_FILE"]="libtcl8.5.dll" +S["TCL_LIB_FLAG"]="-ltcl8.5" +S["TCL_LIB_SPEC"]="-L/usr/lib -ltcl8.5" +S["TCL_STUB_LIB_FILE"]="libtclstub8.5.a" +S["TCL_STUB_LIB_FLAG"]="-ltclstub8.5" +S["TCL_STUB_LIB_SPEC"]="-Wl,-ltclstub8.5" +S["HAVE_TCL"]="1" +S["TARGET_READLINE_LIBS"]="" +S["TARGET_READLINE_INC"]="" +S["TARGET_HAVE_READLINE"]="0" +S["TARGET_DEBUG"]="-DNDEBUG" +S["USE_AMALGAMATION"]="1" +S["OPT_FEATURE_FLAGS"]="-DSQLITE_OMIT_LOAD_EXTENSION=1" +S["USE_GCOV"]="0" +S["BUILD_CFLAGS"]=" -g" +S["LIBOBJS"]="" +S["LTLIBOBJS"]="" +_ACAWK +cat >>"$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +D["PACKAGE_NAME"]=" \"sqlite\"" +D["PACKAGE_TARNAME"]=" \"sqlite\"" +D["PACKAGE_VERSION"]=" \"3.8.1\"" +D["PACKAGE_STRING"]=" \"sqlite 3.8.1\"" +D["PACKAGE_BUGREPORT"]=" \"\"" +D["STDC_HEADERS"]=" 1" +D["HAVE_SYS_TYPES_H"]=" 1" +D["HAVE_SYS_STAT_H"]=" 1" +D["HAVE_STDLIB_H"]=" 1" +D["HAVE_STRING_H"]=" 1" +D["HAVE_INTTYPES_H"]=" 1" +D["HAVE_STDINT_H"]=" 1" +D["HAVE_UNISTD_H"]=" 1" +D["LT_OBJDIR"]=" \".libs/\"" +D["HAVE_INT8_T"]=" 1" +D["HAVE_INT16_T"]=" 1" +D["HAVE_INT32_T"]=" 1" +D["HAVE_INT64_T"]=" 1" +D["HAVE_INTPTR_T"]=" 1" +D["HAVE_UINT8_T"]=" 1" +D["HAVE_UINT16_T"]=" 1" +D["HAVE_UINT32_T"]=" 1" +D["HAVE_UINT64_T"]=" 1" +D["HAVE_UINTPTR_T"]=" 1" +D["HAVE_SYS_TYPES_H"]=" 1" +D["HAVE_STDLIB_H"]=" 1" +D["HAVE_STDINT_H"]=" 1" +D["HAVE_INTTYPES_H"]=" 1" +D["HAVE_MALLOC_H"]=" 1" +D["HAVE_LOCALTIME_R"]=" 1" +D["HAVE_GMTIME_R"]=" 1" +D["HAVE_MALLOC_USABLE_SIZE"]=" 1" + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ { + line = $ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + prefix = substr(line, 1, index(line, defundef) - 1) + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", line, "*/" + next + } + } +} +{ print } +_ACAWK + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + ac_datarootdir_hack=' + s&@datadir@&${datarootdir}&g + s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g + s&@infodir@&${datarootdir}/info&g + s&@localedir@&${datarootdir}/locale&g + s&@mandir@&${datarootdir}/man&g + s&\${datarootdir}&${prefix}/share&g' ;; +esac +ac_sed_extra=" + +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } + fi + ;; + + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + + esac +done # for ac_tag + + +{ (exit 0); exit 0; } diff --git a/components/external/SQLite-3.8.1/make/libtool b/components/external/SQLite-3.8.1/make/libtool new file mode 100644 index 0000000000..4e58260c5e --- /dev/null +++ b/components/external/SQLite-3.8.1/make/libtool @@ -0,0 +1,8945 @@ +#! /bin/sh + +# libtool - Provide generalized library-building support services. +# Generated automatically by config.status () 3.8 +# Libtool was configured on host geniuscode: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=2.2.6 +macro_revision=1.3012 + +# Whether or not to build shared libraries. +build_libtool_libs=no + +# Whether or not to build static libraries. +build_old_libs=yes + +# What type of objects to build. +pic_mode=default + +# Whether or not to optimize for fast installation. +fast_install=yes + +# The host system. +host_alias=arm-none-eabi +host=arm-none-eabi +host_os=eabi + +# The build system. +build_alias= +build=i686-pc-cygwin +build_os=cygwin + +# A sed program that does not truncate output. +SED="/usr/bin/sed" + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP="/usr/bin/grep" + +# An ERE matcher. +EGREP="/usr/bin/grep -E" + +# A literal string matcher. +FGREP="/usr/bin/grep -F" + +# A BSD- or MS-compatible name lister. +NM="/cygdrive/c/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin/arm-none-eabi-nm -B" + +# Whether we need soft or hard links. +LN_S="ln -s" + +# What is the maximum length of a command? +max_cmd_len=8192 + +# Object file suffix (normally "o"). +objext=o + +# Executable file suffix (normally ""). +exeext= + +# whether the shell understands "unset". +lt_unset=unset + +# turn spaces into newlines. +SP2NL="tr \\040 \\012" + +# turn newlines into spaces. +NL2SP="tr \\015\\012 \\040\\040" + +# How to create reloadable object files. +reload_flag=" -r" +reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" + +# An object symbol dumper. +OBJDUMP="arm-none-eabi-objdump" + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method="unknown" + +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd="\$MAGIC_CMD" + +# The archiver. +AR="arm-none-eabi-ar" +AR_FLAGS="cru" + +# A symbol stripping program. +STRIP="arm-none-eabi-strip" + +# Commands used to install an old-style archive. +RANLIB="arm-none-eabi-ranlib" +old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib" +old_postuninstall_cmds="" + +# A C compiler. +LTCC="arm-none-eabi-gcc" + +# LTCC compiler flags. +LTCFLAGS=" -g -O2 -DSQLITE_OS_UNIX=1" + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe="" + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl="" + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (void *) 0},/p' -e 's/^[BCDEGRST]* \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (void *) \\&\\2},/p'" + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (void *) 0},/p' -e 's/^[BCDEGRST]* \\([^ ]*\\) \\(lib[^ ]*\\)\$/ {\"\\2\", (void *) \\&\\2},/p' -e 's/^[BCDEGRST]* \\([^ ]*\\) \\([^ ]*\\)\$/ {\"lib\\2\", (void *) \\&\\2},/p'" + +# The name of the directory that contains temporary libtool files. +objdir=.libs + +# Shell to use when invoking shell scripts. +SHELL="/bin/sh" + +# An echo program that does not interpret backslashes. +ECHO="echo" + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=file + +# Must we lock files when doing compilation? +need_locks="no" + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL="" + +# Tool to change global to local symbols on Mac OS X. +NMEDIT="" + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO="" + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL="" + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64="" + +# Old archive suffix (normally "a"). +libext=a + +# Shared library suffix (normally ".so"). +shrext_cmds=".so" + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds="" + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink="PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + +# Do we need the "lib" prefix for modules? +need_lib_prefix=unknown + +# Do we need a version for libraries? +need_version=unknown + +# Library versioning type. +version_type=none + +# Shared library runtime path variable. +runpath_var= + +# Shared library path variable. +shlibpath_var= + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=unknown + +# Format of library name prefix. +libname_spec="lib\$name" + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec="" + +# The coded name of the library, if different from the real name. +soname_spec="" + +# Command to use after installation of a shared archive. +postinstall_cmds="" + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds="" + +# Commands used to finish a libtool library installation in a directory. +finish_cmds="" + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval="" + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=no + +# Compile-time system search path for libraries. +sys_lib_search_path_spec="" + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec="/lib /usr/lib" + +# Whether dlopen is supported. +dlopen_support=unknown + +# Whether dlopen of programs is supported. +dlopen_self=unknown + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=unknown + +# Commands to strip libraries. +old_striplib="arm-none-eabi-strip --strip-debug" +striplib="arm-none-eabi-strip --strip-unneeded" + + +# The linker used to build libraries. +LD="c:/program files/codesourcery/sourcery_codebench_lite_for_arm_eabi/arm-none-eabi/bin/ld.exe" + +# Commands used to build an old-style archive. +old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib" + +# A language specific compiler. +CC="arm-none-eabi-gcc" + +# Is the compiler the GNU compiler? +with_gcc=yes + +# Compiler flag to turn off builtin functions. +no_builtin_flag=" -fno-builtin" + +# How to pass a linker flag through the compiler. +wl="-Wl," + +# Additional compiler flags for building library objects. +pic_flag=" -fPIC -DPIC" + +# Compiler flag to prevent dynamic linking. +link_static_flag="-static" + +# Does compiler simultaneously support -c and -o options? +compiler_c_o="yes" + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=yes + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=no + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec="" + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec="" + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object="no" + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds="" + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds="" + +# Commands used to build a shared archive. +archive_cmds="" +archive_expsym_cmds="" + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds="" +module_expsym_cmds="" + +# Whether we are building with GNU ld or not. +with_gnu_ld="no" + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag="" + +# Flag that enforces no undefined symbols. +no_undefined_flag="" + +# Flag to hardcode $libdir into a binary during linking. +# This must work even if $libdir does not exist +hardcode_libdir_flag_spec="" + +# If ld is used when linking, flag to hardcode $libdir into a binary +# during linking. This must work even if $libdir does not exist. +hardcode_libdir_flag_spec_ld="" + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator="" + +# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=no + +# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting ${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=no + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=no + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=unsupported + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=no + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=no + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=unknown + +# Fix the shell variable $srcfile for the compiler. +fix_srcfile_path="" + +# Set to "yes" if exported symbols are required. +always_export_symbols=no + +# The commands to list exported symbols. +export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols" + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*" + +# Symbols that must always be exported. +include_expsyms="" + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds="" + +# Specify filename containing input files. +file_list_spec="" + +# How to hardcode a shared library path into an executable. +hardcode_action=unsupported + +# ### END LIBTOOL CONFIG + +# Generated from ltmain.m4sh. + +# ltmain.sh (GNU libtool) 2.2.6 +# Written by Gordon Matzigkeit <[email protected]>, 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to <[email protected]>. + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=2.2.6 +TIMESTAMP="" +package_revision=1.3012 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done + +$lt_unset CDPATH + + + + + +: ${CP="cp -f"} +: ${ECHO="echo"} +: ${EGREP="/usr/bin/grep -E"} +: ${FGREP="/usr/bin/grep -F"} +: ${GREP="/usr/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/opt/local/bin/gsed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + +# Generated shell functions inserted here. + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +# Generated shell functions inserted here. + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: +func_dirname_and_basename "$progpath" +progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=: + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname${mode+: }$mode: $*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` + done + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "X$my_tmpdir" | $Xsed +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "X$1" | $Xsed \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + + + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/# -h/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + $ECHO + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help +# Echo long help message to standard output and exit. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + exit $? +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1" + exit_cmd=exit +} + +exit_cmd=: + + + + + +# Check that we have a working $ECHO. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi +# Same for EGREP, and just to be sure, do LTCC as well +if test "x$EGREP" = x ; then + EGREP=egrep +fi +if test "x$LTCC" = x ; then + LTCC=${CC-gcc} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit $EXIT_SUCCESS +fi + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +# $mode is unset +nonopt= +execute_dlfiles= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +opt_dry_run=false +opt_duplicate_deps=false +opt_silent=false +opt_debug=: + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + $ECHO "host: $host" + if test "$build_libtool_libs" = yes; then + $ECHO "enable shared libraries" + else + $ECHO "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $ECHO "enable static libraries" + else + $ECHO "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac + + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift + + case $opt in + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done + + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac + + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +$opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} + + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + case "$@ " in + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T <<EOF +# $write_libobj - a libtool object file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +pic_object=$write_lobj + +# Name of the non-PIC object +non_pic_object=$write_oldobj + +EOF + $MV "${write_libobj}T" "${write_libobj}" + } +} + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + pie_flag="$pie_flag $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.obj | *.sx) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + removelist="$removelist $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + removelist="$removelist $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { +test "$mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac + + $ECHO + $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? +} + + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + $ECHO "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS +} + +test "$mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + $ECHO >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + $ECHO >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + + +# func_emit_wrapper_part1 [arg=no] +# +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () +{ + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $ECHO "\ + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "$SHELL $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. +*/ +EOF + cat <<"EOF" +#include <stdio.h> +#include <stdlib.h> +#ifdef _MSC_VER +# include <direct.h> +# include <process.h> +# include <io.h> +# define setmode _setmode +#else +# include <unistd.h> +# include <stdint.h> +# ifdef __CYGWIN__ +# include <io.h> +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +# endif +#endif +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> +#include <string.h> +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <sys/stat.h> + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} +#else +# define LTWRAPPER_DEBUGPRINTF(args) +#endif + +const char *program_name = NULL; + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_fatal (const char *message, ...); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <<EOF + +static const char *script_text_part2 = +EOF + func_emit_wrapper_part2 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + + cat <<EOF +const char * MAGIC_EXE = "$magic_exe"; +const char * LIB_PATH_VARNAME = "$shlibpath_var"; +EOF + + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + func_to_host_pathlist "$temp_rpath" + cat <<EOF +const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; +EOF + else + cat <<"EOF" +const char * LIB_PATH_VALUE = ""; +EOF + fi + + if test -n "$dllsearchpath"; then + func_to_host_pathlist "$dllsearchpath:" + cat <<EOF +const char * EXE_PATH_VARNAME = "PATH"; +const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; +EOF + else + cat <<"EOF" +const char * EXE_PATH_VARNAME = ""; +const char * EXE_PATH_VALUE = ""; +EOF + fi + + if test "$fast_install" = yes; then + cat <<EOF +const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ +EOF + else + cat <<EOF +const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ +EOF + fi + + + cat <<"EOF" + +#define LTWRAPPER_OPTION_PREFIX "--lt-" +#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 + +static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; +static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; + +static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; + +static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; +static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; + /* argument is putenv-style "foo=bar", value of foo is set to bar */ + +static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; +static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; + /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ + +static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; +static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; + /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ + +int +main (int argc, char *argv[]) +{ + char **newargz; + int newargc; + char *tmp_pathspec; + char *actual_cwrapper_path; + char *actual_cwrapper_name; + char *target_name; + char *lt_argv_zero; + intptr_t rval = 127; + + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); + LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); + + /* very simple arg parsing; don't want to rely on getopt */ + for (i = 1; i < argc; i++) + { + if (strcmp (argv[i], dumpscript_opt) == 0) + { +EOF + case "$host" in + *mingw* | *cygwin* ) + # make stdout use "unix" line endings + echo " setmode(1,_O_BINARY);" + ;; + esac + + cat <<"EOF" + printf ("%s", script_text_part1); + printf ("%s", script_text_part2); + return 0; + } + } + + newargz = XMALLOC (char *, argc + 1); + tmp_pathspec = find_executable (argv[0]); + if (tmp_pathspec == NULL) + lt_fatal ("Couldn't find %s", argv[0]); + LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", + tmp_pathspec)); + + actual_cwrapper_path = chase_symlinks (tmp_pathspec); + LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", + actual_cwrapper_path)); + XFREE (tmp_pathspec); + + actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); + strendzap (actual_cwrapper_path, actual_cwrapper_name); + + /* wrapper name transforms */ + strendzap (actual_cwrapper_name, ".exe"); + tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); + XFREE (actual_cwrapper_name); + actual_cwrapper_name = tmp_pathspec; + tmp_pathspec = 0; + + /* target_name transforms -- use actual target program name; might have lt- prefix */ + target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); + strendzap (target_name, ".exe"); + tmp_pathspec = lt_extend_str (target_name, ".exe", 1); + XFREE (target_name); + target_name = tmp_pathspec; + tmp_pathspec = 0; + + LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", + target_name)); +EOF + + cat <<EOF + newargz[0] = + XMALLOC (char, (strlen (actual_cwrapper_path) + + strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); + strcpy (newargz[0], actual_cwrapper_path); + strcat (newargz[0], "$objdir"); + strcat (newargz[0], "/"); +EOF + + cat <<"EOF" + /* stop here, and copy so we don't have to do this twice */ + tmp_pathspec = xstrdup (newargz[0]); + + /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ + strcat (newargz[0], actual_cwrapper_name); + + /* DO want the lt- prefix here if it exists, so use target_name */ + lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); + XFREE (tmp_pathspec); + tmp_pathspec = NULL; +EOF + + case $host_os in + mingw*) + cat <<"EOF" + { + char* p; + while ((p = strchr (newargz[0], '\\')) != NULL) + { + *p = '/'; + } + while ((p = strchr (lt_argv_zero, '\\')) != NULL) + { + *p = '/'; + } + } +EOF + ;; + esac + + cat <<"EOF" + XFREE (target_name); + XFREE (actual_cwrapper_path); + XFREE (actual_cwrapper_name); + + lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ + lt_setenv ("DUALCASE", "1"); /* for MSK sh */ + lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); + lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); + + newargc=0; + for (i = 1; i < argc; i++) + { + if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) + { + if (argv[i][env_set_opt_len] == '=') + { + const char *p = argv[i] + env_set_opt_len + 1; + lt_opt_process_env_set (p); + } + else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) + { + lt_opt_process_env_set (argv[++i]); /* don't copy */ + } + else + lt_fatal ("%s missing required argument", env_set_opt); + continue; + } + if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) + { + if (argv[i][env_prepend_opt_len] == '=') + { + const char *p = argv[i] + env_prepend_opt_len + 1; + lt_opt_process_env_prepend (p); + } + else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) + { + lt_opt_process_env_prepend (argv[++i]); /* don't copy */ + } + else + lt_fatal ("%s missing required argument", env_prepend_opt); + continue; + } + if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) + { + if (argv[i][env_append_opt_len] == '=') + { + const char *p = argv[i] + env_append_opt_len + 1; + lt_opt_process_env_append (p); + } + else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) + { + lt_opt_process_env_append (argv[++i]); /* don't copy */ + } + else + lt_fatal ("%s missing required argument", env_append_opt); + continue; + } + if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) + { + /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX + namespace, but it is not one of the ones we know about and + have already dealt with, above (inluding dump-script), then + report an error. Otherwise, targets might begin to believe + they are allowed to use options in the LTWRAPPER_OPTION_PREFIX + namespace. The first time any user complains about this, we'll + need to make LTWRAPPER_OPTION_PREFIX a configure-time option + or a configure.ac-settable value. + */ + lt_fatal ("Unrecognized option in %s namespace: '%s'", + ltwrapper_option_prefix, argv[i]); + } + /* otherwise ... */ + newargz[++newargc] = xstrdup (argv[i]); + } + newargz[++newargc] = NULL; + + LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); + for (i = 0; i < newargc; i++) + { + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); + } + +EOF + + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac + + cat <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal ("Could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} + +void +lt_setenv (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : "<NULL>"), + (value ? value : "<NULL>"))); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : "<NULL>"), + (value ? value : "<NULL>"))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : "<NULL>"), + (value ? value : "<NULL>"))); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + + +EOF +} +# end: func_emit_cwrapperexe_src + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + weak_libs="$weak_libs $arg" + prev= + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_duplicate_deps ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $ECHO + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + $ECHO + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $ECHO + $ECHO "*** Warning: This system can not link to static lib archive $lib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_dirname "$deplib" "" "." + dir="$func_dirname_result" + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + $ECHO + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c <<EOF + int main() { return 0; } +EOF + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then + ldd_output=`ldd conftest` + for i in $deplibs; do + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $ECHO + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which I believe you do not have" + $ECHO "*** because a test_compile did reveal that the linker did not use it for" + $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." + fi + fi + ;; + *) + newdeplibs="$newdeplibs $i" + ;; + esac + done + else + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $i; then + ldd_output=`ldd conftest` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $ECHO + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because a test_compile did reveal that the linker did not use this one" + $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." + fi + fi + else + droppeddeps=yes + $ECHO + $ECHO "*** Warning! Library $i is needed by this library but I was not able to" + $ECHO "*** make it link in! You will probably need to install it or some" + $ECHO "*** library that it depends on before this library will be fully" + $ECHO "*** functional. Installing it before continuing would be even better." + fi + ;; + *) + newdeplibs="$newdeplibs $i" + ;; + esac + done + fi + ;; + file_magic*) + set dummy $deplibs_check_method; shift + file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $ECHO + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + done + fi + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO + if test "X$deplibs_check_method" = "Xnone"; then + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." + else + $ECHO "*** Warning: inter-library dependencies are not known to be supported." + fi + $ECHO "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + $ECHO 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + $ECHO ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + $ECHO "$obj" >> $output + done + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + delfiles="$delfiles $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $ECHO "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + if test "x$EGREP" = x ; then + EGREP=egrep + fi + # We do not want portage's install root ($D) present. Check only for + # this if the .la is being installed. + if test "$installed" = yes && test "$D"; then + eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` + else + mynewdependency_lib="$libdir/$name" + fi + # Do not add duplicates + if test "$mynewdependency_lib"; then + my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` + if test -z "$my_little_ninja_foo_1"; then + newdependency_libs="$newdependency_libs $mynewdependency_lib" + fi + fi + ;; + *) + if test "$installed" = yes; then + # Rather use S=WORKDIR if our version of portage supports it. + # This is because some ebuild (gcc) do not use $S as buildroot. + if test "$PWORKDIR"; then + S="$PWORKDIR" + fi + # We do not want portage's build root ($S) present. + my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$S"` + # We do not want portage's install root ($D) present. + my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$D"` + if test -n "$my_little_ninja_foo_2" && test "$S"; then + mynewdependency_lib="" + elif test -n "$my_little_ninja_foo_3" && test "$D"; then + eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` + else + mynewdependency_lib="$deplib" + fi + else + mynewdependency_lib="$deplib" + fi + # Do not add duplicates + if test "$mynewdependency_lib"; then + my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` + if test -z "$my_little_ninja_foo_4"; then + newdependency_libs="$newdependency_libs $mynewdependency_lib" + fi + fi + ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + # Do not add duplicates + if test "$installed" = yes && test "$D"; then + install_libdir=`echo "$install_libdir" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` + fi + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/components/external/SQLite-3.8.1/make/sqlite3.pc b/components/external/SQLite-3.8.1/make/sqlite3.pc new file mode 100644 index 0000000000..78cd06c175 --- /dev/null +++ b/components/external/SQLite-3.8.1/make/sqlite3.pc @@ -0,0 +1,13 @@ +# Package Information for pkg-config + +prefix=/usr/local +exec_prefix=${prefix} +libdir=${exec_prefix}/lib +includedir=${prefix}/include + +Name: SQLite +Description: SQL database engine +Version: 3.8.1 +Libs: -L${libdir} -lsqlite3 +Libs.private: +Cflags: -I${includedir} |