1 files changed, 144 insertions, 144 deletions
diff --git a/examples/kernel/thread_delete.c b/examples/kernel/thread_delete.c
index 4c8336ca5d..6bae53994e 100644
--- a/examples/kernel/thread_delete.c
+++ b/examples/kernel/thread_delete.c
@@ -1,144 +1,144 @@
-/*
- * 程序清单：删除线程
- *
- * 这个例子会创建两个线程，在一个线程中删除另外一个线程。
- */
-#include <rtthread.h>
-#include "tc_comm.h"
-
-/*
- * 线程删除(rt_thread_delete)函数仅适合于动态线程，为了在一个线程
- * 中访问另一个线程的控制块，所以把线程块指针声明成全局类型以供全
- * 局访问
- */
-static rt_thread_t tid1 = RT_NULL, tid2 = RT_NULL;
-/* 线程1的入口函数 */
-static void thread1_entry(void* parameter)
-{
-	rt_uint32_t count = 0;
-
-	while (1)
-	{
-		/* 线程1采用低优先级运行，一直打印计数值 */
-		// rt_kprintf("thread count: %d\n", count ++);
-		count ++;
-	}
-}
-static void thread1_cleanup(struct rt_thread *tid)
-{
-	if (tid != tid1)
-	{
-		tc_stat(TC_STAT_END | TC_STAT_FAILED);
-		return ;
-	}
-	rt_kprintf("thread1 end\n");
-	tid1 = RT_NULL;
-}
-
-/* 线程2的入口函数 */
-static void thread2_entry(void* parameter)
-{
-	/* 线程2拥有较高的优先级，以抢占线程1而获得执行 */
-
-	/* 线程2启动后先睡眠10个OS Tick */
-	rt_thread_delay(10);
-
-	/*
-	 * 线程2唤醒后直接删除线程1，删除线程1后，线程1自动脱离就绪线程
-	 * 队列
-	 */
-	rt_thread_delete(tid1);
-
-	/*
-	 * 线程2继续休眠10个OS Tick然后退出，线程2休眠后应切换到idle线程
-	 * idle线程将执行真正的线程1控制块和线程栈的删除
-	 */
-	rt_thread_delay(10);
-}
-
-static void thread2_cleanup(struct rt_thread *tid)
-{
-	/*
-	 * 线程2运行结束后也将自动被删除(线程控制块和线程栈在idle线
-	 * 程中释放)
-	 */
-
-	if (tid != tid2)
-	{
-		tc_stat(TC_STAT_END | TC_STAT_FAILED);
-		return ;
-	}
-	rt_kprintf("thread2 end\n");
-	tid2 = RT_NULL;
-	tc_done(TC_STAT_PASSED);
-}
-
-/* 线程删除示例的初始化 */
-int thread_delete_init()
-{
-	/* 创建线程1 */
-	tid1 = rt_thread_create("t1", /* 线程1的名称是t1 */
-		thread1_entry, RT_NULL,   /* 入口是thread1_entry，参数是RT_NULL */
-		THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
-	if (tid1 != RT_NULL) /* 如果获得线程控制块，启动这个线程 */
-	{
-		tid1->cleanup = thread1_cleanup;
-		rt_thread_startup(tid1);
-	}
-	else
-		tc_stat(TC_STAT_END | TC_STAT_FAILED);
-
-	/* 创建线程1 */
-	tid2 = rt_thread_create("t2", /* 线程1的名称是t2 */
-		thread2_entry, RT_NULL,   /* 入口是thread2_entry，参数是RT_NULL */
-		THREAD_STACK_SIZE, THREAD_PRIORITY - 1, THREAD_TIMESLICE);
-	if (tid2 != RT_NULL) /* 如果获得线程控制块，启动这个线程 */
-	{
-		tid2->cleanup = thread2_cleanup;
-		rt_thread_startup(tid2);
-	}
-	else
-		tc_stat(TC_STAT_END | TC_STAT_FAILED);
-
-	return 0;
-}
-
-#ifdef RT_USING_TC
-static void _tc_cleanup()
-{
-	/* lock scheduler */
-	rt_enter_critical();
-
-	/* delete thread */
-	if (tid1 != RT_NULL)
-	{
-		rt_kprintf("tid1 is bad\n");
-		tc_stat(TC_STAT_FAILED);
-	}
-	if (tid2 != RT_NULL)
-	{
-		rt_kprintf("tid2 is bad\n");
-		tc_stat(TC_STAT_FAILED);
-	}
-
-	/* unlock scheduler */
-	rt_exit_critical();
-}
-
-int _tc_thread_delete()
-{
-	/* set tc cleanup */
-	tc_cleanup(_tc_cleanup);
-	thread_delete_init();
-
-	return 27;
-}
-FINSH_FUNCTION_EXPORT(_tc_thread_delete, a thread delete example);
-#else
-int rt_application_init()
-{
-	thread_delete_init();
-
-	return 0;
-}
-#endif
+/*
+ * 程序清单：删除线程
+ *
+ * 这个例子会创建两个线程，在一个线程中删除另外一个线程。
+ */
+#include <rtthread.h>
+#include "tc_comm.h"
+
+/*
+ * 线程删除(rt_thread_delete)函数仅适合于动态线程，为了在一个线程
+ * 中访问另一个线程的控制块，所以把线程块指针声明成全局类型以供全
+ * 局访问
+ */
+static rt_thread_t tid1 = RT_NULL, tid2 = RT_NULL;
+/* 线程1的入口函数 */
+static void thread1_entry(void* parameter)
+{
+	rt_uint32_t count = 0;
+
+	while (1)
+	{
+		/* 线程1采用低优先级运行，一直打印计数值 */
+		// rt_kprintf("thread count: %d\n", count ++);
+		count ++;
+	}
+}
+static void thread1_cleanup(struct rt_thread *tid)
+{
+	if (tid != tid1)
+	{
+		tc_stat(TC_STAT_END | TC_STAT_FAILED);
+		return ;
+	}
+	rt_kprintf("thread1 end\n");
+	tid1 = RT_NULL;
+}
+
+/* 线程2的入口函数 */
+static void thread2_entry(void* parameter)
+{
+	/* 线程2拥有较高的优先级，以抢占线程1而获得执行 */
+
+	/* 线程2启动后先睡眠10个OS Tick */
+	rt_thread_delay(10);
+
+	/*
+	 * 线程2唤醒后直接删除线程1，删除线程1后，线程1自动脱离就绪线程
+	 * 队列
+	 */
+	rt_thread_delete(tid1);
+
+	/*
+	 * 线程2继续休眠10个OS Tick然后退出，线程2休眠后应切换到idle线程
+	 * idle线程将执行真正的线程1控制块和线程栈的删除
+	 */
+	rt_thread_delay(10);
+}
+
+static void thread2_cleanup(struct rt_thread *tid)
+{
+	/*
+	 * 线程2运行结束后也将自动被删除(线程控制块和线程栈在idle线
+	 * 程中释放)
+	 */
+
+	if (tid != tid2)
+	{
+		tc_stat(TC_STAT_END | TC_STAT_FAILED);
+		return ;
+	}
+	rt_kprintf("thread2 end\n");
+	tid2 = RT_NULL;
+	tc_done(TC_STAT_PASSED);
+}
+
+/* 线程删除示例的初始化 */
+int thread_delete_init()
+{
+	/* 创建线程1 */
+	tid1 = rt_thread_create("t1", /* 线程1的名称是t1 */
+		thread1_entry, RT_NULL,   /* 入口是thread1_entry，参数是RT_NULL */
+		THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
+	if (tid1 != RT_NULL) /* 如果获得线程控制块，启动这个线程 */
+	{
+		tid1->cleanup = thread1_cleanup;
+		rt_thread_startup(tid1);
+	}
+	else
+		tc_stat(TC_STAT_END | TC_STAT_FAILED);
+
+	/* 创建线程1 */
+	tid2 = rt_thread_create("t2", /* 线程1的名称是t2 */
+		thread2_entry, RT_NULL,   /* 入口是thread2_entry，参数是RT_NULL */
+		THREAD_STACK_SIZE, THREAD_PRIORITY - 1, THREAD_TIMESLICE);
+	if (tid2 != RT_NULL) /* 如果获得线程控制块，启动这个线程 */
+	{
+		tid2->cleanup = thread2_cleanup;
+		rt_thread_startup(tid2);
+	}
+	else
+		tc_stat(TC_STAT_END | TC_STAT_FAILED);
+
+	return 0;
+}
+
+#ifdef RT_USING_TC
+static void _tc_cleanup()
+{
+	/* lock scheduler */
+	rt_enter_critical();
+
+	/* delete thread */
+	if (tid1 != RT_NULL)
+	{
+		rt_kprintf("tid1 is bad\n");
+		tc_stat(TC_STAT_FAILED);
+	}
+	if (tid2 != RT_NULL)
+	{
+		rt_kprintf("tid2 is bad\n");
+		tc_stat(TC_STAT_FAILED);
+	}
+
+	/* unlock scheduler */
+	rt_exit_critical();
+}
+
+int _tc_thread_delete()
+{
+	/* set tc cleanup */
+	tc_cleanup(_tc_cleanup);
+	thread_delete_init();
+
+	return 27;
+}
+FINSH_FUNCTION_EXPORT(_tc_thread_delete, a thread delete example);
+#else
+int rt_application_init()
+{
+	thread_delete_init();
+
+	return 0;
+}
+#endif