| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2023-09-08 | [ci]change cmd to install.sh (#8018) | Supper Thomas | |
| 2023-09-07 | [ci] use env install script (#8010) | Meco Man | |
| Co-authored-by: Supper Thomas <[email protected]> | |||
| 2023-08-29 | [bsp][stm32]: add NUCLEO-H563ZI (#7987) | yuanzihao | |
| 2023-08-02 | [bsp] phytium e2000 update (#7900) | zhangyan | |
| Co-authored-by: zhugengyu <[email protected]> | |||
| 2023-07-25 | 更新瑞萨相关 bsp (#7858) | guo | |
| 2023-07-25 | [bsp][esp32-c3] Realization of scons compilation of ESP32-C3 | ↵ | WCX | |
| 实现ESP32-C3的scons编译 (#7821) Co-authored-by: Supper Thomas <[email protected]> | |||
| 2023-07-22 | [debug] 整理debug宏并增加RT_DEBUGING_CONTEXT (#7805) | Man, Jianting (Meco) | |
| 2023-07-17 | [add] add msp432e401y-LaunchPad BSP v0.1 | yby | |
| 2023-07-14 | [libcpu]fix RT_ASSERT undefine (#7816) | Supper Thomas | |
| 2023-07-11 | [bsp][stm32] add B-U585I-IOT02A BSP (#7778) | Zheng-Bicheng | |
| B-U585I-IOT02A芯片为STM32U585AIIxQ，与stm32u575-st-nucleo板卡接近，因此参考stm32u575-st-nucleo对B-U585I-IOT02A板卡的BSP进行了实现 | |||
| 2023-07-05 | [bsp][acm32] 修复 acm32 并添加 ci (#7783) | zhkag | |
| 2023-07-05 | [bsp][renesas] 修复 renesas 部分 bsp 并添加 ci (#7782) | zhkag | |
| 2023-07-01 | [ci] Add the exp_STM32 scons | supperthomas | |
| 2023-06-16 | [menuconfig] 修复 menuconfig 相关问题 (#7686) | zhkag | |
| Co-authored-by: supperthomas <[email protected]> | |||
| 2023-06-13 | [simulator] 添加 simulator in Linux ci (#7664) | zhkag | |
| 2023-06-05 | [bsp][stm32] add STM32F334 NUCLEO BSP (#7600) | tangzz98 | |
| 2023-05-25 | [bsp][ra6m3-hmi-board] support gcc and llvm-arm toolchain. (#7553) | guo | |
| Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2023-05-23 | [bsp][yichip] add yc3122-pos (#7526) | zhiqiandeng | |
| Co-authored-by: supperthomas <[email protected]> | |||
| 2023-05-22 | [bsp][stm32][stm32l496-st-discovery] add stm32l496G DISCO bsp (#7544) | Rain Park | |
| Signed-off-by: spencergotowork <[email protected]> | |||
| 2023-05-20 | [atomic] add stdc atomic detection. (#7536) | Bernard Xiong | |
| 2023-05-18 | [action][ci] add maxim/max32660 (#7532) | supperthomas | |
| 2023-05-17 | [add] llvm-arm workflows | guozhanxin | |
| 2023-05-15 | [action] add ra6m3-hmi-board (#11) (#7508) | supperthomas | |
| 2023-05-12 | [CI][action] optimize the action view (#7480) | supperthomas | |
| 2023-04-30 | [libc] support external third pary libc software package (#7425) | Man, Jianting (Meco) | |
| 2023-04-26 | [CI] ci 编译时先执行 scons --pyconfig-silent 后进行编译 (#7383) | zhkag | |
| 2023-04-24 | [Renesas]Add HMI-Board bsp | Rbb666 | |
| 2023-04-07 | [bsp/at32] add at32f423-start to auto check workflows | sheltonyu | |
| 2023-04-07 | [action][github] Add the index and rebuild company list | supperthomas | |
| 2023-04-05 | add apm32 can driver and add apm32e1/s1 rtt driver support (#7170) | luobeihai | |
| * add apm32 can driver and add apm32e1/s1 rtt driver support * format some files * modified action.yml file and modified bsp picture and add bsp README.md | |||
| 2023-04-01 | [action][github] Optimize the action time (#7140) | supperthomas | |
| optmize the action yml | |||
| 2023-03-26 | [bsp][stm32] add stm32h750-fk750m1-vbt6 bsp | NU-LL | |
| 2023-03-25 | [bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097) | flyingcys | |
| * update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action | |||
| 2023-03-10 | [GD32]add gd32470z-lckfb (#7022) | yuanzihao | |
| * --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植 * -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。 -重新用ENV生成编译固件 片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。 * -修改IAR编译的链接脚本 * --修改Flash和RAM大小 -RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配 * -修改MDK链接脚本 * -修改board.h * -修改MCU型号 * -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0 -Scons正常生成工程 * -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04 * -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件 * -修改led1和change logs * -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程 * -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。 * -使用formatting源码格式化工具跑一边gd32470z-lckfb目录 * -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c] -三个月前的提交多了几个空格 | |||
| 2023-03-06 | 新增stm32f401-weact-blackpill BSP（STM32F401CCU6最小系统板） (#6973) | Misthao | |
| * 新增stm32f401-weact-blackpill | |||
| 2023-03-02 | [bsp][lpc55sxx] add CPU define for S06/S16/S29/S36 make GCC comiple pass | 杨熙 | |
| 2023-03-01 | [STM32]Add STM32F723E-DISCO bsp support | Rbb666 | |
| 2023-02-03 | [IFX]Add psoc6 bsp | Rbb666 | |
| 2023-02-01 | fixed format error, add auto compile check | sheltonyu | |
| 2023-02-01 | [Renesas]Fix ra6m3 build error | Rbb666 | |
| 2023-01-15 | add some apm32 bsp and fix apm32f0/apm32f1 gcc startup assembly file bug and ↵ | luobeihai | |
| fix apm32 drv_eth.c bug (#6855) * add some apm32 bsp and fix apm32f0/apm32f4 gcc startup assembly file bug and fix drv_eth.c bug * fix apm32f103xe-minibroard and apm32f407ig-minibroard link.lds file error * replace apm32f051r8-evalboard picture * fix apm32f1 gcc assembly startup file suffix name * renamed startup_apm32f10x_md.s/startup_apm32f10x_hd.s file and modify apm32f103xe-minibroard/board SConscript file | |||
| 2023-01-05 | [BSP] Add n32g4frml-stb bsp (#6773) | BruceOu | |
| 新增n32g4frml-stb bsp，在n32g4frml-stb 开发板上测试通过。 Add n32g4frml-stb bsp. passed the test on the n32g4frml-stb board. | |||
| 2023-01-05 | add apm32F0 serie MCU support (#6789) | luobeihai | |
| * add apm32F0 serie MCU support add apm32f072vb-miniboard bsp update F103/F407 bsp * replace apm32f072vb picture * Update action.yml | |||
| 2022-12-27 | [bsp] add air32f103 (#6785) | 打盹的消防车 | |
| 2022-12-20 | [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for ↵ | ANDREW LI-Nordic | |
| 5340 (#6754) * add nrf5340 bsp,add uarte and gpio drv for 5340 * [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340 Co-authored-by: andrew li <[email protected]> | |||
| 2022-12-07 | Add Infineon BSP production document | Rbb666 | |
| 2022-12-06 | fix ci install libsdl-dev error | guozhanxin | |
| 2022-12-03 | sync branch rt-smart. (#6641) | guo | |
| * Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <[email protected]> Co-authored-by: zhkag <[email protected]> | |||
| 2022-11-12 | [stm32 f411] rename stm32f411-weact-blackpill | Meco Man | |
| 2022-10-20 | [ci] add new bsp to ci | NU-LL | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |