summaryrefslogtreecommitdiff
path: root/.github
AgeCommit message (Collapse)Author
2023-03-26[bsp][stm32] add stm32h750-fk750m1-vbt6 bspNU-LL
2023-03-25[bsp]add bl808 uart2 driver && add bl60x/bl70x bsp to ci-action (#7097)flyingcys
* update bl_mcu_sdk SConscript && add bl808 uart2 driver * add bl60x/bl70x bsp to ci-action
2023-03-23[atomic]添加arm与risc-v下的常用原子操作函数 (#7053)Yaochenger
* Update Kconfig * Update trap_gcc.S * Update bsp/hifive1/drivers/SConscript Co-authored-by: Man, Jianting (Meco) <[email protected]> * Update SConscript * [atomic]提交一份arm与risc-v架构下的常用原子操作函数 * 修改变量类型 * 更新rtatomic.h与atomic_port.c * 更新rt-thread\libcpu\arm\common\atomic_port.c * 更新include/rtatomic.h与libcpu/arm/common/SConscript * 更新include/rtatomic.h * 修正格式与Kconfig * 修正格式与文件结构 * 规范文件格式与文件重命名 * 添加测试用例与CI * 添加函数声明 * 修改virt64/SConscript 添加atomic_riscv.c * 1.规范代码风格 * 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误 * 添加C11标准库原子操作测试 --------- Co-authored-by: Man, Jianting (Meco) <[email protected]>
2023-03-10[GD32]add gd32470z-lckfb (#7022)yuanzihao
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植 * -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。 -重新用ENV生成编译固件 片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。 * -修改IAR编译的链接脚本 * --修改Flash和RAM大小 -RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配 * -修改MDK链接脚本 * -修改board.h * -修改MCU型号 * -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0 -Scons正常生成工程 * -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04 * -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件 * -修改led1和change logs * -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程 * -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。 * -使用formatting源码格式化工具跑一边gd32470z-lckfb目录 * -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c] -三个月前的提交多了几个空格
2023-03-06新增stm32f401-weact-blackpill BSP（STM32F401CCU6最小系统板） (#6973)Misthao
* 新增stm32f401-weact-blackpill
2023-03-02[bsp][lpc55sxx] add CPU define for S06/S16/S29/S36 make GCC comiple pass杨熙
2023-03-01[STM32]Add STM32F723E-DISCO bsp supportRbb666
2023-02-13[ci]add aarch64 smart ciguozhanxin
2023-02-13add rt-smart risv64 ciguozhanxin
2023-02-13[ci] utest add --strictguozhanxin
2023-02-13add rtsmart ciguozhanxin
2023-02-03[IFX]Add psoc6 bspRbb666
2023-02-01fixed format error, add auto compile checksheltonyu
2023-02-01[Renesas]Fix ra6m3 build errorRbb666
2023-01-15add some apm32 bsp and fix apm32f0/apm32f1 gcc startup assembly file bug and ↵luobeihai
fix apm32 drv_eth.c bug (#6855) * add some apm32 bsp and fix apm32f0/apm32f4 gcc startup assembly file bug and fix drv_eth.c bug * fix apm32f103xe-minibroard and apm32f407ig-minibroard link.lds file error * replace apm32f051r8-evalboard picture * fix apm32f1 gcc assembly startup file suffix name * renamed startup_apm32f10x_md.s/startup_apm32f10x_hd.s file and modify apm32f103xe-minibroard/board SConscript file
2023-01-05[BSP] Add n32g4frml-stb bsp (#6773)BruceOu
新增n32g4frml-stb bsp，在n32g4frml-stb 开发板上测试通过。 Add n32g4frml-stb bsp. passed the test on the n32g4frml-stb board.
2023-01-05add apm32F0 serie MCU support (#6789)luobeihai
* add apm32F0 serie MCU support add apm32f072vb-miniboard bsp update F103/F407 bsp * replace apm32f072vb picture * Update action.yml
2022-12-27[bsp] add air32f103 (#6785)打盹的消防车
2022-12-20[bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for ↵ANDREW LI-Nordic
5340 (#6754) * add nrf5340 bsp,add uarte and gpio drv for 5340 * [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340 Co-authored-by: andrew li <[email protected]>
2022-12-07Add Infineon BSP production documentRbb666
2022-12-06fix ci install libsdl-dev errorguozhanxin
2022-12-03sync branch rt-smart. (#6641)guo
* Synchronize the code of the rt mart branch to the master branch. * TTY device * Add lwP code from rt-smart * Add vnode in DFS, but DFS will be re-write for rt-smart * There are three libcpu for rt-smart: * arm/cortex-a, arm/aarch64 * riscv64 Co-authored-by: Rbb666 <[email protected]> Co-authored-by: zhkag <[email protected]>
2022-11-12[stm32 f411] rename stm32f411-weact-blackpillMeco Man
2022-10-31update PR templateMeco Man
2022-10-20[ci] add new bsp to ciNU-LL
2022-10-20[pr-template] 修正PR模板的链接路径错误Meco Man
2022-10-19[n32] add CI queueMeco Man
2022-10-11[ci]add ft2004 (#6503)Man, Jianting (Meco)
2022-10-10修改英飞凌BSP名称Rbb666
2022-09-29GitHub Workflows security hardening (#6472)Alex
* build: harden action_tools.yml permissions Signed-off-by: Alex <[email protected]> * build: harden action.yml permissions Signed-off-by: Alex <[email protected]> * build: harden action_utest.yml permissions Signed-off-by: Alex <[email protected]> Signed-off-by: Alex <[email protected]>
2022-09-28[GD32][BSP]添加GD32303C-START开发板 (#6465)liYangYang
* first copy * [GD32][BSP]添加GD32303C-START开发板 * 更新yml文件 * 更新scons脚本
2022-09-02更正stm32/stm32f103-100ask-mini和pro的默认下载器为st-link，添加 ↵slhuan
基于mm32f3270系列由百问网自主设计的火龙果开发板的bsp
2022-08-24[scons] 使用target=mdk5 和 iar时，打印IDE版本号 (#6315)Man, Jianting (Meco)
* [scons] 使用target=mdk5 和 iar时，打印IDE版本号 * 移除对keil iar生成功能的检查 1.这些工程是否可以生成是BSP可选项，不是每个BSP都支持 2.CI环境中并没有安转IAR和Keil环境，导致直接获取IDE版本失败 * MDKProject函数重命名为MDK2Project
2022-08-16将swm320和swm341整合进synwit (#6290)woody
* 将swm320和swm341整合进synwit
2022-08-14ci: restrict rt-thread organizationMan, Jianting (Meco)
2022-08-13add synwit swm341 bsp (#6235)woody
华芯微特SWM341芯片的bsp支持包 * 修改dac.c函数名称错误 * delete swm320-lq100 bsp * 修复sdio读写块的地址偏移问题 * add synwit swm341 bsp * 修复gcc下启动文件错误 * 为测试用例添加说明
2022-08-09【BSP】CY8CKIT-062S2-43012 (#6237)Rbb666
英飞凌 CY8CKIT-062S2-43012 BSP
2022-06-28[bsp/gd32]Optimize GD32 bsp architecture (#6108)BruceOu
* [bsp/gd32]Optimize GD32 bsp architecture
2022-06-14[bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with ↵100ask-Alen
other bsp and commit a bug for drv_adc,c (#6068) * [bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with other bsp and commit a bug for drv_adc,c (#6068)
2022-06-08[bsp][100ask]: create two new bsp for 100ask stm32f103 boards and commit ↵100ask-Alen
them (#6045) * 重新pull后上传bsp和action * remove the file named main.c in cubemx prj and add enter at last in the file named user_key.c * remove personal project environment file project.uvguix.slhuan in rtt/bsp/stm32/stm32f103_100ask_mini * remove system_stmf1xx.c in bsp/stm32/stm32f103-100ask_pro/mini * modify stm32f1xx_it.c code to conform to the specification Co-authored-by: slhuan <[email protected]>
2022-06-06HC32 configuration file revise (#6015)levizhxl
* fixed some configuration errors.
2022-05-25[bsp] rename qemu-riscv-virt64 to qemu-virt64-riscvrewine
2022-05-20updateMeco Man
2022-05-20update stm32 ci checking listMeco Man
2022-05-13[bsp/at32] add at32f413 and at32f415 seriessheltonyu
2022-05-13[nxp] add ci checkMeco Man
2022-04-21[utestcases] add cpp11 base testcase.guozhanxin
2022-04-18update for cisheltonyu
2022-04-14Add Microchip SAM series MCU support for RT-Thread (#5771)Kevin Liu
* Add Microchip SAM series MCU support for RT-Thread Add Microchip SAM series MCU support for RT-Thread, including SAM Cortex-M0+, M4F and M7. * Add bsp directory to ignored check list Add bsp directory to ignored check list, add microchip /samc21/same54/same70 to workflows list * remove STDIO definition and bug fix 1. remove STDIO code from Microchip official BSP. 2. bug fix of SAME70 hpl/hpl_usart.c, samc21&same54 hpl/hpl_sercom.c baudrate update interface. 3. Add RT-Thread standard STDIO implementation on Microchip SAM MCU. * add CAN driver & example and script fix Add CAN driver and example for SAMC21/SAME5x/SAME70 and fix rtconfig.py issue(unused space might result link error) * Add Chinese version README Add Chinese version README for SAMC21/E54/E70
2022-04-01[ci] update action use python@v3 (#5756)guo
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-23 20:26:33 +0000