| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* legacy fdt
* update fdt
|
|
sal_get_socket((int)file->vnode->data); (#9065)
* [components][drivers] added sensor device lookup function
* [components][drivers] modified the format
* [components][drivers] modified 'sensor.c' file format
* Update af_inet_at.c
|
|
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <[email protected]>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <[email protected]>
|
|
|
|
整理 components/drivers 的 Kconfig
|
|
* GPIO驱动与QSPI驱动适配
* C++支持
* update
---------
Co-authored-by: 张衍 <[email protected]>
|
|
Update sd.c
|
|
fix shutdown log
|
|
[feat] Enhance support for backtrace service
rt_backtrace_formatted_print() and rt_backtrace_to_buffer() to help
debug routines.
Also, following modification are included:
- make rt_backtrace_frame patchable with weak attr
- replace lwp backtrace with sync output
Signed-off-by: Shell <[email protected]>
|
|
* first
* second
* thrid
* Update SConscript
* tmpfs testcase default n
* Update dfs_tmpfs.c
* format document
---------
Co-authored-by: zhujiale <[email protected]>
|
|
* Update mnt.c
* Update mnt.c
* Update mnt.c
* Add files via upload
* Update mnt.c
* Update mnt.c
|
|
|
|
* [utest] remove delay for on thread testing
The delay is introduced from 0dc7b9a5a26030a945723569c64f5be46bd70ae1.
Though this is unnecessary for on sync utest.
So this is removed by a new entry and delay for asynchronous utest only.
Signed-off-by: Shell <[email protected]>
* fixup: msh cmd prototype
---------
Signed-off-by: Shell <[email protected]>
|
|
Update sd.c
|
|
|
|
[BSP] HC32F460 工程中增加几个源文件
|
|
|
|
Update drv_smc911x.c
代码中用到udelay和mdelay函数，但是没有包含头文件
|
|
* [smart] fixup: precise mm fault type
Also, fixup arm64 read access fault
* arm64: using meaningful macro on trap
* fixup: renaming macro
|
|
|
|
|
|
There is no next-level directory under the components/mm/
directory. Do not need to enter the next-level directory
to process the SConscript file.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
- removed invalid reference in board KConfig
Signed-off-by: Fan YANG <[email protected]>
|
|
* [smart] add CPU usage tracing config
This patch introduces following features:
- Added CPU usage tracing functionality, enabled by default, for
applications like 'top'
- update time as smart independent
Signed-off-by: Shell <[email protected]>
* fixup: add ump idle thread
---------
Signed-off-by: Shell <[email protected]>
|
|
hpm_sdk
- added new boards: hpm5300evk, hpm5301evklite and hpm6800evk
- upgaded hpm_sdk
- driver updates and bugfixes
- add hpmicro BSPs to CI
Signed-off-by: Fan YANG <[email protected]>
|
|
|
|
|
|
�� (#9021)
解决pull_request_template.md不小心移动到了issue_template目录
|
|
* [DM/feature] Implement PIC irq state { get; set }
There are some common state for irq:
1. Pending: IRQ was triggered, but software not ACK.
2. Active: IRQ was ACK, but not EOI.
3. Masked: IRQ was masked or umasked.
Signed-off-by: GuEe-GUI <[email protected]>
* [DM/pic] Support IRQ state { get; set } for ARM GICv2/v3
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
fix compile err in pic-gic
|
|
更新issue模板，采用议题表单模式
|
|
This patch fixup the script execution capabilities on argv passing
and adds support for arguments larger than 4k.
According to POSIX, the script parameter is quiet different
from the current implementation. Especially on the way it inserts
the path of executables. At the end, when you execute a script
from `$PATH`, it always fails.
For the script, interpreter will be invoked with the following
arguments: `{interpreter [optional-arg] pathname arg...}`
where pathname is the pathname of the file specified as the first
argument of execve(), and arg... is the series of words pointed
to by the argv argument of execve(), starting at argv[1]. Note that
there is no way to get the argv[0] that was passed to the
execve() call.
The changes include:
- Separating argument, environment variable, and auxiliary vector
processing into a new lwp_args.c file.
- Fixing bugs in script argument processing and supporting arguments
larger than 4k.
- Updating lwp_execve to use the new argscopy function and removing
the old lwp_argscopy function.
- Making various modifications to lwp_load and elf_aux_fill to work
with the new argument processing.
- Removing unnecessary code related to dynamic loading and interpreter
scripts.
Signed-off-by: Shell <[email protected]>
|
|
* list_process can print tid
* fix-ci
* update list_process
* Update lwp_pid.c
|
|
|
|
* [Feature] Power domain for device
1.Support device power on/off.
2.Support attach/detach device.
3.Support power domain driver api.
Signed-off-by: GuEe-GUI <[email protected]>
* [DM/platform] Enhanced platform bus
1.Add power domain for device.
2.Support `remove` and `shutdown` bus interface.
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* 解决ktime部分函数计算时unsigned long溢出
* 恢复部分不需要ktime中部分rt_uint64_t类型的为unsigned long
|
|
- add parameter phy to specify multiple-phy instance
Signed-off-by: Jiading Xu <[email protected]>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
