| Age | Commit message (Collapse) | Author |
|
(#7091)
|
|
|
|
* [components/drivers][touch]删除多余的touch.h
* 将touc.h替换为rtdevice.h
|
|
|
|
【修改】为README.md开发文档修改了Hifive为sifive描述
|
|
* Update Kconfig
* Update trap_gcc.S
* Update bsp/hifive1/drivers/SConscript
Co-authored-by: Man, Jianting (Meco) <[email protected]>
* Update SConscript
* [atomic]提交一份arm与risc-v架构下的常用原子操作函数
* 修改变量类型
* 更新rtatomic.h与atomic_port.c
* 更新rt-thread\libcpu\arm\common\atomic_port.c
* 更新include/rtatomic.h与libcpu/arm/common/SConscript
* 更新include/rtatomic.h
* 修正格式与Kconfig
* 修正格式与文件结构
* 规范文件格式与文件重命名
* 添加测试用例与CI
* 添加函数声明
* 修改virt64/SConscript 添加atomic_riscv.c
* 1.规范代码风格
* 2.添加RISC-V64原子指令支持 解决在RV64下编译器将32-bit运算结果扩展为64-bit 导致判断错误
* 添加C11标准库原子操作测试
---------
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
【修改】为README.md开发文档修改了[Kendryte]为[Canaan Kendryte]描述
【修改】为README_zh.md开发文档修改了Hifive为sifive描述
【修改】为README_zh.md开发文档修改了[Kendryte]为[嘉楠Kendryte]描述
|
|
|
|
|
|
* [errno code]fix that use RT_ENOSYS without -
* Update bsp/airm2m/air32f103/libraries/rt_drivers/drv_hwtimer.c
---------
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
* add uart6 support
* [ifx] add rw007 support
* [ifx] add spi6 support
* [ifx] fix rw007 cs pin
* [ifx] change default console to uart6
|
|
like:scons --dist --target=mdk5 --project-name=hello --project-path=C:\Users\xxx\Desktop\test
scons --dist [--target=xxx] [--project-name=xxx] [--project-path=xxx]
支持在dist之后,将dist出来的工程直接生成为目标工程,相当于自动执行scons --target=xxx
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* add rtt sdio/flash/sdram driver
* formatting rtt drivers
|
|
|
|
|
|
* Add riscv_32e support
* add bl808 lp core
* update README.md
|
|
|
|
过时代码
|
|
|
|
* [mm] mmu operations should be wrapped by _aspace_bst_insert & _aspace_bst_remove to avoid competition on page table
* [lwp] may not return null on failed
|
|
Co-authored-by: flyingcys <flyingcys!163.com>
|
|
* [syscall] move sys_cacheflush to lwp_syscall.c
* [syscall] improve assertion
* [format] rename to rt_ctassert
* [debug] modified ct assertion on mm_page.c
|
|
|
|
|
|
|
|
|
|
|
|
* [libcpu/risc-v] support noncached normal memory
* [mm] check before dereference in _fetch_page
* [mm] add comments on ioremap
* [ioremap] report more info on failed
|
|
|
|
rt_spi_bus_attach_device_cspin function
|
|
* [fix] reinsert should not suspend twice
* [mutex] fix prioceiling
* [mutex] fix prioceiling
|
|
* [timer] fix sys return value to avoid outdated errno
* [rtdef] add wrap to stringify
* [syscall] return value in rt errno should be recycle immediately after call to posix layer
* [syscall] return type of syscall should be long
errno should be recycle immediately after call to rt posix layer to avoid
outdated value
* [format] move prototype to header file
* [fix] futex definition conflict
|
|
|
|
|
|
|
|
|
|
* [i2c] fix the i2c device return error code
|
|
|
|
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植
* -修改模板keil工程的配置,IROM需要注意总共为1024k,分为Code area 和Data area ,IRAM1为 : 512K-64K=448K=458752=0x70000。
-重新用ENV生成编译固件
片上SRAM可分为4块,分别为SRAM0(112KB)、SRAM1(16KB)、SRAM2(64KB)和TCMSRAM(64KB)。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问,然而,TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问。BKPSRAM(备份SRAM)应用于备份域,即使当VDD供电电源掉电时,该SRAM仍可保持其内容。附加SRAM(ADDSRAM)只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵,上述SRAM块可以同时被不同的AHB主机访问,例如,即使CPU正在访问SRAM0,USBHS也可以访问SRAM1。
* -修改IAR编译的链接脚本
* --修改Flash和RAM大小
-RAM大小为448k是因为512K-64K=448K,其中后面的64K为TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问,先不要乱分配
* -修改MDK链接脚本
* -修改board.h
* -修改MCU型号
* -Finsh控制台和LED1闪灯程序工作正常,串口控制台名称错误,从uart改为uart0
-Scons正常生成工程
* -发现GD32固件库当前没有240Mhz的时钟配置,将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04
* -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件
* -修改led1和change logs
* -按照提交规范使能 One ELF Section per Function(MDK) 并用scons重新生成工程
* -发现整个GD32的IAR模板工程template.eww 是没有的,所以当前是不支持IAR开发的,需要后面学习一下IAR使用再实现了。
* -使用formatting源码格式化工具跑一边gd32470z-lckfb目录
* -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c]
-三个月前的提交多了几个空格
|
|
|
|
* fix LWIP_HOOK_IP4_ROUTE_SRC.
* fix netdev ping select network card.
|