| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
|
|
Fixes: 3b97667323 ("utest: serial: move from examples to components/drivers/serial")
Signed-off-by: Chen Wang <[email protected]>
|
|
In 66448d9e96 "utest: smp_call: move from example to components/drivers/smp_call"
UTEST_SMP_CALL_FUNC was replaced with RT_UTEST_SMP_CALL_FUNC.
However, some files are forgot to do this replacement, so this patch address
this.
Note: In .config, lines like "# CONFIG_XXX is not set" do not need
to be modified; they are comments. Furthermore, for BSPs, running
"scons --menuconfig" and save the config will automatically replace
them. Therefore, no modification is necessary in this case.
Signed-off-by: Chen Wang <[email protected]>
|
|
In 01e015450f, "utest: move driver-related case under to drivers,"
UTEST_DEVICE_TC was replaced with RT_UTEST_DRIVERS_CORE. However,
some files are forgot to do this replacement, so this patch address
this.
Note: In .config, lines like "# CONFIG_XXX is not set" do not need
to be modified; they are comments. Furthermore, for BSPs, running
"scons --menuconfig" and save the config will automatically replace
them. Therefore, no modification is necessary in this case.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
|
|
|
|
__sdidinit (#10791)
|
|
remove auto generated cconfig.h
|
|
Also:
- Add "RT_" prefix for utest config options.
- Rename the case names to following the naming rule.
Signed-off-by: Chen Wang <[email protected]>
|
|
Also:
- Add "RT_" prefix for the UTEST config options.
- Follow the naming rules to update the case name.
Signed-off-by: Chen Wang <[email protected]>
|
|
Also,
- Rename UTEST_SMP_CALL_FUNC to RT_UTEST_SMP_CALL_FUNC.
- Add depends on RT_USING_SMP in Kconfig for RT_UTEST_SMP_CALL_FUNC
- Follow the naming rules of utest case to update the cases' name.
Signed-off-by: Chen Wang <[email protected]>
|
|
Follow the naming rules of utest-cases.
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
|
|
[cpp_check.py 80 INFO] bsp/w60x/drivers/drv_rtc.c:58:11: error: Syntax Error: AST broken, binary operator '&=' doesn't have two operands. [internalAstError]
[cpp_check.py 80 INFO] libcpu/arm/s3c24x0/rtc.c:34:12: error: Expression 'RTCCON|=RTCCON|=0x01' depends on order of evaluation of side effects [unknownEvaluationOrder]
|
|
Add dependent of RT_USING_SERIAL_V2 in Kconfig to
make sure utest for serial_v2 is only available
when RT_USING_SERIAL_V2 is enabled.
Otherwise menuconfig allow people enable UTEST_SERIAL_TC
but building of utestcases failed. It looks weird and
better to be fixed.
Signed-off-by: Chen Wang <[email protected]>
|
|
Add dependent of RT_USING_SERIAL_BYPASS in Kconfig to
make sure utest for serial-bypass is only available
when RT_USING_SERIAL_BYPASS is enabled.
Otherwise building of utestcases failed when UTEST_SERIAL_BYPASS
is enabled.
Signed-off-by: Chen Wang <[email protected]>
|
|
next_delay should be rt_tick_t
Use time_t for RT_DEVICE_CTRL_RTC_GET_TIME
|
|
The current test environment is mainly based on Ubuntu
22.04 LTS and doxygen version is 1.9.1.
But when we switch to Ubuntu 24.04, the default Doxygen
version on Ubuntu 24.04 is 1.9.8.
The supported configuration and layout file formats
differ from those in 1.9.1 (Ubuntu 22.04).
In particular, the layout XML file format of 1.9.8 is
incompatible with the older format(1.9.1). Therefore,
to support Doxygen on Ubuntu 24.04, we need to load
different configuration and layout files. (The layout
file is specified using the LAYOUT_FILE parameter in
the configuration file.)
Solution: Provide corresponding configuration and layout
files for different Doxygen versions, distinguished by
the Doxygen version number.
Currently, only Doxygen versions 1.9.1 and above are supported.
If the doxygen version is >= 1.9.1 but < 1.9.8, the 1.9.1
configuration and layout are used by default. If the doxygen
version is >= 1.9.8, the 1.9.8 configuration and layout are used.
Only 1.9.1 and 1.9.8 have been tested, as these are the
default doxygen versions on Ubuntu 22.04 LTS and Ubuntu
24.04. Other versions have not been tested yet. If
necessary, we will change the configuration based on
the same approach in the future.
Signed-off-by: Chen Wang <[email protected]>
|
|
针对不同的 Aarch64 BSP 针对 KERNEL_VADDR_START 宏定义进行区分
|
|
|
|
* doxygen: remove @return command if function return void
When doxygen is upgraded to v1.9.8 (on ubuntu 24.04), doxygen
reports: "doxygen error: found documented return type for xxx
that does not return anything" for those functions which return
void but declare "@return" in doxygen comment.
Solution: remove "@return" for those cases, and update
guide document for how to write doxgen comment for functions.
Signed-off-by: Chen Wang <[email protected]>
* doxygen: fixed a minor typo for uart doc
This error is found when building with doxygen 1.9.8, but not
detecetd on 1.9.1.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
|
|
|
|
|
|
ci: add concurrency control to GitHub Actions
|
|
The cleanup involved three parts:
- Merging the standalone "/**@{*/" into
"@addtogroup group_thread_management"
- Changing "/**@}*/" to "/** @} group_thread_management */",
adding the group name makes it easier to find the matching "@{" part.
- Deleting the "@addtogroup" directive in "include/rtthread.h"
because this header file doesn't have doxygen comments.
All doxygen comments for function bodies are defined in other .c files.
Note, we remian two doxygen comments for rt_thread_inited_hookproto_t
and rt_thread_idle_sethook in the "include/rtthread.h".
rt_thread_inited_hookproto_t is really defined here.
For rt_thread_idle_sethook, please see FIXME comment for reason.
Signed-off-by: Chen Wang <[email protected]>
|
|
The cleanup involved three parts:
- Merging the standalone "/**@{*/" into
"@addtogroup group_object_management"
- Changing "/**@}*/" to "/** @} group_object_management */",
adding the group name makes it easier to find the matching "@{" part.
- Deleting the "@addtogroup" directive in "include/rtthread.h"
because this header file doesn't have doxygen comments.
All doxygen comments for function bodies are defined in "src/object.c".
Plus minor cleanup for group_hook in src/object.c.
Signed-off-by: Chen Wang <[email protected]>
|
|
The names and number of macro parameters in doxygen comments
must match the actual macro definition; otherwise, a warning
will be generated.
Our goal is to eliminate all warnings.
Signed-off-by: Chen Wang <[email protected]>
|
|
键的支持，改进输入模式处理 (#10595)
|
|
* [fix] 更新e906的以BSP导入RT-Studio相关文件
|
|
|
|
|
|
functionality
- Added support for non-blocking mode CAN message sending, including software ring buffer management and dynamic memory allocation options.
- Improved related comments and error handling.
- Updated example code to demonstrate the usage of both blocking and non-blocking sending modes, and corrected some structure field naming and macro definitions.
|
|
|
|
|
|
|
