| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2022-11-20 | [stm32f410][RTduino] 修改pins_arduino.c和Kconfig (#6629) | lpy | |
| 2022-11-20 | 修改ch32v307软件spi的宏 | Harrypotter-zhs | |
| 2022-11-18 | [arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件 (#6614) | 螺丝松掉的人 | |
| * [arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件 Signed-off-by: 褚仕成 <[email protected]> * [arduino][f411-blackpill] 完善cubeMX配置 * 编辑 Kconfig 文件 * 完善Kconfig文件中PWM的配置 * 将rtduino的配置移至Onboard Peripheral Drivers * 使能SPI * Update Sconscript Signed-off-by: 褚仕成 <[email protected]> Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2022-11-19 | add rt_sensor_float_t | Meco Man | |
| 2022-11-19 | [sensor] 传感器数据类型使用float代替rt_uint32_t类型 | Meco Man | |
| 2022-11-17 | use rt_memcpy/rt_memset to replace memcpy/memset | Meco Man | |
| 2022-11-17 | format imxrt drver files | Meco Man | |
| 2022-11-17 | 修复rtc驱动，实现掉电能保存时钟数据(硬件外接电池) | xjy | |
| 2022-11-14 | [imxrt1176]Fix usb (#6589) | xiao xie | |
| 修复USB驱动，实现imxrt1176平台usb host，支持usb3.0读写 | |||
| 2022-11-14 | 【修复】工作目录下，当某一目录下的源文件都不需要添� ↵ | guozhanxin | |
| ��到工程时，此目录不会被屏蔽的问题。 | |||
| 2022-11-14 | Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c | myshow2258 | |
| Modified components/drivers/usb/usbdevice/class/cdc_vcom.c 修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备. | |||
| 2022-11-14 | [kernel] 优化Sconscript脚本 | Meco Man | |
| 2022-11-14 | [sensor] use arg to replace user_data | Meco Man | |
| 2022-11-14 | c28x scons | Yunjie Gu | |
| 2022-11-14 | Update netdev.c | Yohozzy | |
| 2022-11-14 | [kernel] 修正复制name字段时潜在的内存踩踏问题 | Meco Man | |
| 2022-11-13 | 添加STM32F410 NUCLEO RTDUINO (#6613) | lpy | |
| * 添加STM32F410 NUCLEO RTDUINO * 修改stm32f410 nuleco RTDUINO * 修改stm32f410 nuleco RTDUINO * Update Sconscript Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2022-11-12 | 修复SPI驱动不能使用RT_SPI_MODE_0与RT_SPI_MODE_2的错误。CLKPHA� ↵ | HEYAHONG | |
| �设置工作模式时已设置,后面出现重复设置。 | |||
| 2022-11-12 | [stm32 f411] rename stm32f411-weact-blackpill | Meco Man | |
| 2022-11-10 | [bsp/phytium] add phytium bsp to support e2000 bootup with smp (#6566) | zhugengyu | |
| add phytium board (E2000) bsp support usart support SMP with demo | |||
| 2022-11-09 | replace `rt_enter_critical` with `dfs_lock` for list_fd | a1012112796 | |
| I found that if use mutex in `rt_kprintf`, the `rt_enter_critical` will create a assert error later. after chehcking,I found all operation with fd_table has using `dfs_lock/unlock` to protect. so I think using `dfs_lock` is enough. thanks. Signed-off-by: a1012112796 <[email protected]> | |||
| 2022-11-09 | [sensor] 修改fetch_data方法的参数数据类型为rt_sensor_data_t | Meco Man | |
| 2022-11-09 | [sensor]修改传感器设备名称前缀 | Meco Man | |
| 2022-11-09 | [sensor] use rt_ssize_t as the return value data type | Meco Man | |
| 2022-11-08 | [sensor] 统一数据结构名称和函数命名 | Meco Man | |
| 2022-11-08 | 修复flexspi配置语法错误 | xjy | |
| 2022-11-08 | [imxrt1170]修复SD卡作为引导器后，系统无法挂载SD卡的问题 ↵ | xiao xie | |
| (#6600) * 修复SD卡作为引导器后，系统无法挂载SD卡的问题 * Update Kconfig Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2022-11-08 | [sdio] remove mmcsd_delay_ms | xiao xie | |
| 修改SD检测线程函数里面的延时实现，将mmcsd_delay_ms改为rt_thread_mdelay. mmcsd_delay_ms过时且延时计算错误。 | |||
| 2022-11-07 | 修改I2C0_BUS_CONFIG定义错误 | xiaoxiaolisunny | |
| 修改drv_soft_i2c.h中I2C0_BUS_CONFIG定义错误问题。 | |||
| 2022-11-06 | [sensors] remvoe useless sensor.h | Meco Man | |
| 2022-11-06 | [Kconfig] remove PKG_USING_SENSORS_DRIVERS and PKG_USING_TOUCH_DRIVERS | Meco Man | |
| 2022-11-06 | [stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575) | Man, Jianting (Meco) | |
| * [stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 * Update drv_tim.c | |||
| 2022-11-06 | Merge pull request #6523 from BernardXiong/nested_mutex | Bernard Xiong | |
| [Kernel] Add nested mutex feature | |||
| 2022-11-05 | [rtduino] 修正pinout_arduino文件所在Group名称 | Meco Man | |
| 2022-11-05 | [update]更正 RT_MEMHEAP_BSET_MODE -> RT_MEMHEAP_BEST_MODE 拼写错误。 | liangyingjian | |
| 2022-11-04 | [Tools] add armclangMDK) get version support | wdfk-prog | |
| 2022-11-03 | Merge pull request #6583 from mxgsgtc/bugfix-remove-sdcard-blockdev | Bernard Xiong | |
| [components/sdio] bugfix: remove sdcard block dev may cause a infinite loop. | |||
| 2022-11-02 | bugfix: remove sdcard block dev may cause a constant loop. | xiaoguang_ma | |
| 2022-10-31 | update PR template | Meco Man | |
| 2022-10-30 | Modified bsp/stm32/libraries/HAL_Drivers/config/f4/dma_config.h | myshowtogo | |
| Modified bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c 修复stm32的串口 dma配置 | |||
| 2022-10-30 | 删除对pwm_config的判断，并初始化channel 为RT_NULL | linshire | |
| 2022-10-30 | [bsp] fix the return of the function(drv_pwm_control) in stm32 drv_pwm | linshire | |
| 2022-10-28 | Revert "提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)" | linshire | |
| This reverts commit a4eb5a5399068bc3e2a7548de26d1e54b203f828. | |||
| 2022-10-28 | 提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517) | 100ask-Alen | |
| 在使用stm32的pwm驱动时，发现其初始化channel的时候是根据device->channel这个值去初始化的，device->channel这个值是在pwm_configh.h里面定义设置的，又根据rtt的pwm例程，和常规习惯，应该大多数人会更喜欢设置channel=1/2/3/4，而不是在pwm_configh.h中将channel设置为TIM_CHANNEL_1/2/3/4，因此建议drv_pwm.c做出PR中的修改。 在实际开发中，因pwm_configh.h的示例均是.channel=0，又没有做出解释说明要让.channel=TIM_CHANNEL_1/2/3/4的值，容易误操作导致没有成功输出PWM，这是我在实际开发中遇到的现实问题，因而提出此建议。 | |||
| 2022-10-28 | [libc][time] ↵ | Meco Man | |
| 解决部分编译平台CLOCKS_PER_SEC无法被重新定义的问题 | |||
| 2022-10-27 | expand mq test stack size to fix overstack problem during utest. | fan.ji | |
| Signed-off-by: fan.ji <[email protected]> | |||
| 2022-10-27 | fix test_thread_yield fail bug in multiple utest loop case. | fan.ji | |
| Signed-off-by: fan.ji <[email protected]> | |||
| 2022-10-27 | 将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框� ↵ | linshire | |
| �层与驱动层的混用 | |||
| 2022-10-27 | [net/lwip] Fix ppp retry assert error when tcp is connect. | 朱天龙 (Armink) | |
| 2022-10-26 | [ch32v307] support c++ | Meco Man | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |