summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-23完善 Ifx bsp (#7078)guo
* add uart6 support * [ifx] add rw007 support * [ifx] add spi6 support * [ifx] fix rw007 cs pin * [ifx] change default console to uart6
2023-03-22[tools] support scons --dist --target=xxxMeco Man
like:scons --dist --target=mdk5 --project-name=hello --project-path=C:\Users\xxx\Desktop\test scons --dist [--target=xxx] [--project-name=xxx] [--project-path=xxx] 支持在dist之后，将dist出来的工程直接生成为目标工程，相当于自动执行scons --target=xxx
2023-03-22[errno code][-RT_EBUSY] fix that use RT_EBUSY without -Meco Man
2023-03-22[errno code][-RT_ETIMEOUT] fix that use RT_ETIMEOUT without -Meco Man
2023-03-20[device]修改mtd_nor读写函数返回类型为rt_ssize_twdfk-prog
2023-03-20Update RISC-V descriptionflyingcys
2023-03-20[errno code][-RT_ERROR] fix that use RT_ERROR without -Meco Man
2023-03-20[stm32][drv_tim.c] enable timer clockMeco Man
2023-03-20[stm32][pwm] fix the timer clock enable problemMeco Man
2023-03-20format .icf, .lds, .sctMeco Man
2023-03-20add apm32 rtt sdio/flash/sdram driver (#7065)luobeihai
* add rtt sdio/flash/sdram driver * formatting rtt drivers
2023-03-19[stm32][adc] add error code returnMeco Man
2023-03-19[stm32][pin] 修复GPIO驱动警告Meco Man
2023-03-19[bsp] add bl808 lp core (#7069)flyingcys
* Add riscv_32e support * add bl808 lp core * update README.md
2023-03-19[mm32] add drv_adc to mm32f327x (#7061)letian
2023-03-19[tools] remove auto-ci.py (#7070)Man, Jianting (Meco)
过时代码
2023-03-19format sconscript Kconfig filesMeco Man
2023-03-19[rt-smart] fix competition on aspace (#7064)Shell
* [mm] mmu operations should be wrapped by _aspace_bst_insert & _aspace_bst_remove to avoid competition on page table * [lwp] may not return null on failed
2023-03-19add bl60x/bl70x/bl61x/bl808 (#7063)flyingcys
Co-authored-by: flyingcys <flyingcys!163.com>
2023-03-17[rt-smart] move sys_cacheflush to lwp_syscall.c (#7048)Shell
* [syscall] move sys_cacheflush to lwp_syscall.c * [syscall] improve assertion * [format] rename to rt_ctassert * [debug] modified ct assertion on mm_page.c
2023-03-16[errno code][-RT_EINVAL] fix that use RT_EINVAL without -Meco Man
2023-03-16[error code][RT_EOK] fix RT_EOK with -Meco Man
2023-03-16[RT_ALIGN_SIZE] set RT_ALIGN_SIZE as 8 by defaultMeco Man
2023-03-16[error code][-RT_EIO] fix that use RT_EIO without -Meco Man
2023-03-16[components][mm] add ioremap for normal memory api (#7050)张世争
2023-03-16[libcpu/risc-v] support noncached normal memory (#7051)Shell
* [libcpu/risc-v] support noncached normal memory * [mm] check before dereference in _fetch_page * [mm] add comments on ioremap * [ioremap] report more info on failed
2023-03-15[bsp] Add company readme.mdsupperthomas
2023-03-14[Renesas]Add ra6m4-cpk lvgl for spi-lcd support and update ↵Rbb666
rt_spi_bus_attach_device_cspin function
2023-03-13[mutex] mutex may suspend a thread already suspended & fix ceilingprio (#7046)Shell
* [fix] reinsert should not suspend twice * [mutex] fix prioceiling * [mutex] fix prioceiling
2023-03-13[rt-smart] Fix return value in syscall (#7045)Shell
* [timer] fix sys return value to avoid outdated errno * [rtdef] add wrap to stringify * [syscall] return value in rt errno should be recycle immediately after call to posix layer * [syscall] return type of syscall should be long errno should be recycle immediately after call to rt posix layer to avoid outdated value * [format] move prototype to header file * [fix] futex definition conflict
2023-03-11[format]wangxiaoyao
2023-03-11[lwp] clear vnode in fd after freewangxiaoyao
2023-03-11[bsp/qemu-virt64-aarch64] enable fdt by defaultwangxiaoyao
2023-03-11[lwp] arch should recycle resource it allocatedwangxiaoyao
2023-03-10[i2c] fix the i2c device return error code (#7035)Man, Jianting (Meco)
* [i2c] fix the i2c device return error code
2023-03-11[libcpu/riscv/virt64] fix (#5979) (#7040)zilong
2023-03-10[GD32]add gd32470z-lckfb (#7022)yuanzihao
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植 * -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。 -重新用ENV生成编译固件 片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。 * -修改IAR编译的链接脚本 * --修改Flash和RAM大小 -RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配 * -修改MDK链接脚本 * -修改board.h * -修改MCU型号 * -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0 -Scons正常生成工程 * -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04 * -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件 * -修改led1和change logs * -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程 * -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。 * -使用formatting源码格式化工具跑一边gd32470z-lckfb目录 * -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c] -三个月前的提交多了几个空格
2023-03-10[net] fix LWIP_HOOK_IP4_ROUTE_SRC defineguozhanxin
2023-03-10Fix net (#7034)geniusgogo
* fix LWIP_HOOK_IP4_ROUTE_SRC. * fix netdev ping select network card.
2023-03-09[device]修改i2c读写函数返回类型为rt_ssize_t (#7029)Zxy
2023-03-09[libcpu/riscv/c906] fix "next_asid" type error (#7031)chenhy0106
MAX_ASID最大为0x10000，在next_asid==MAX_ASID时进入下一个generation。因此next_asid不能只有16位，否则将不能进入下一个generation。修改rt_uint16_t为rt_uint32_t。
2023-03-08[ch32]修正接口数据类型 (#7025)charlown
2023-03-07[libcpu/risc-v]更新移植readmeYaochenger
2023-03-07修改doc文件夹下pwm例程中将led的io设置为输出模式后再使� ↵slhuan
�PWM控制LED，经验证使用这样是无法正常输出PWM的
2023-03-06Remove redundant 'extern' in function declarationcyyang
2023-03-05[bsp][rtduino] update arduino_main.cppMeco Man
2023-03-06新增stm32f401-weact-blackpill BSP（STM32F401CCU6最小系统板） (#6973)Misthao
* 新增stm32f401-weact-blackpill
2023-03-05[libcpu/risc-v]迁移libcpu/risc-v/e310与rv32m1文件中内容至bsp (#7015)Yaochenger
2023-03-04[tools][vsc] Add the workspace of vscode (#7017)supperthomas
2023-03-03[Fix]:fix at_server.c link failed when using ac6betesla
use __ARMCC_VERSION to replace __CC_ARM
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-23 23:50:21 +0000