summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-25[rtduino] 对接STM32F412 NUCLEO (#6461)Man, Jianting (Meco)
2022-09-23RTC STM32F1 Enable PWR and BKP clocks in the same timeYangZhongQing
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。 STM32F10x要求： 写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE（详见：stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####） 问题分析： 1、RTC首次上电时：由于HAL_RTC_Init初始化之前没有使能BKP时钟，所以对RTC registers的初始化无效。 2、然后用date命令设置时间，调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE，所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP，重启后就丢失。 最终导致：对于RTC首次上电的情况，每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA，导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。 解决办法： 参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
2022-09-23[bsp][nrf52840]Add segger rtt function (#6460)supperthomas
* fix project to AC6 * add the segger_rtt function * move Kconfig
2022-09-22添加了 rtc 驱动hg0720
2022-09-22[usbhost] List keyboard option. (#6456)Wayne
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. * [usbhost] List keyboard and update driver. * Enlarge to reasonable thread stack size. * Do indent.. * Keep private. Co-authored-by: Wayne Lin <[email protected]>
2022-09-22[tools] 增加scons --exec-path=xxx命令 用于动态设置编译链路径Meco Man
scons --target=iar --exec-path=xxxx scons --exec-path=xxxx
2022-09-22[bsp/stm32] 简化drv_usart中的DMA接收逻辑 (#6357)BreederBai
2022-09-22bsp beaglebone: add IAR support (#6443)YangZhongQing
* bsp beaglebone: add IAR template files and fix it's build error ATTENTION: project.* was generated by scons, so I add it to gitignore. rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong. （我只是从STM32里面抄来，然后根据自己的理解改了一下，并没有验证这些参数的正确性， 我也不知道怎么用命令行调用这些参数来编译） * bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds, the difference will easy cause later developer got below error: => go 0x80200000 ## Starting application at 0x80200000 ... undefined instruction pc : [<8200956c>] lr : [<8ff62497>] reloc pc : [<728a956c>] lr : [<80802497>] sp : 8df37358 ip : 00000000 fp : 00000002 r10: 8df4d448 r9 : 8df3feb8 r8 : 8ffd30f8 r7 : 8ff78089 r6 : 00000002 r5 : 80200000 r4 : 8df4d44c r3 : 80200000 r2 : 8df4d44c r1 : 8df4d44c r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf) Resetting CPU ... resetting ... * libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support IAR new project defualt Processor mode is Thumb, this will cause user easy occur the following error: ... msh />Execption: r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000 r08:0x00000000 r09:0x00000000 r10:0x0000000a fp :0x0000000a ip :0x65687374 sp :0x00006c6c lr :0x0000008a pc :0x88008be0 cpsr:0x880001bc software interrupt shutdown... (0) assertion failed at function:rt_hw_cpu_shutdown, line number:160 * bsp beaglebone: change IAR template.ewp code use Arm mode Arm mode bin size will bigger than Thumb mode * libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable Reviewer mysterywolf say: 麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
2022-09-20[stm32f401 nucleo] update main.c revert blinking LEDMeco Man
2022-09-20[RTduino]更新stm32f469的对接文件liyangyang
2022-09-20修改Ymodem组件中MSH的ry命令，已便于自定义保存路径 (#6433)wdfk-prog
* 修改ry命令，已便于自定义保存路径 * modified: components/utilities/ymodem/ry_sy.c
2022-09-20[fix] Fix simulator compilation warnings (#6438)Tangyuxin
* [fix] Fix simulator compilation warnings * Update bsp/simulator/rtconfig_project.h Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-09-20[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448)Wayne
Co-authored-by: Wayne Lin <[email protected]>
2022-09-19[RTduino]stm32f103-blue-pill更新对接文件liyangyang
2022-09-19[memheap] Fix the Oz optimization problem of AC6 compilertangyuxin
2022-09-19[ch32v307v-r1] 添加了模拟iic驱动 (#6447)hg0720
2022-09-19[imxrt1170-m7]Adjust pro dir structure (#6446)xiao xie
2022-09-18[rtduino]重新整理pinout (#6445)Man, Jianting (Meco)
* [rtduino][stm32l475-pandora] 重新整理pinout * [rtduino][bluepill] 整理pinout * [rtduino][stm32-f401nucleo]整理pinout * [rtduino][stm32-pandora] 整理pinout * [rtduino][stm32f072]整理pinout
2022-09-18[tools][iar] 将IARPath作为独立函数Meco Man
2022-09-18[RTduino]stm32f401-st-nucleo 更新对接文件liyangyang
2022-09-18[ch32v307v-r1] 添加dac驱动 (#6440)hg0720
2022-09-16[BSP] CH32V307 add drv_adc (#6431)linshire
添加了ch32v307的adc驱动，已在ch32v307评估班上对adc1ch5进行了验证，并修改了kconfig以及scons脚本，可以成功编译以及使用
2022-09-16Modified bsp/stm32/libraries/HAL_Drivers/drv_can.cmyshowtogo
修复字符串比较错误
2022-09-16使用 __ARMCC_VERSION 代替 __CC_ARM 用以支持AC6编译 (#6436)charlown
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译，通过gd32f303测试。
2022-09-16[kernel] add rt_ssize_t data structureMeco Man
2022-09-15完善bsp beaglebone的基本使用 (#6434)Man, Jianting (Meco)
* bsp beaglebone: rerun menuconfg * bsp beaglebone: add uart0 support * bsp beaglebone: use uart0 as console * bsp beaglebone: add heap init fix rt_application_init() error: (m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288 * bsp beaglebone: add mmu & interrupt init must init mmu, otherwise no interrupt is generated, cause scheduler can't work. I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c * libcpu am335x: reset interrupt controller before init vector I think reset before init is more better AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c IntAINTCInit() * bsp beaglebone: full gpio driver support * bsp beaglebone: add tftpboot way to uboot_cmd.txt * bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one Co-authored-by: YangZhongQing <[email protected]>
2022-09-15[iar] 修正IAR编译链名称Meco Man
2022-09-16fix:The directory "sdkdir" is set incorrectlyDozingfiretruck
2022-09-15[stm32][bluepill] update readmeMeco Man
2022-09-15[imxrt 1170]add flexspi support (#6429)xiao xie
* [imxrt 1170]add flexspi support * format file * format file * update flexspi serial root clk to 80MHz * format file
2022-09-14[rtduino][bluepill] 增加英语readme (#6425)Man, Jianting (Meco)
* [rtduino][bluepill] update readme
2022-09-14ESP32_C3 migrate to ESP-IDF package (#6427)tangzz98
2022-09-13[imxrt 1170]Support us delay (#6424)xiao xie
* add us delay * formating file
2022-09-12[修订]修改许可协议CaiYiming0503
2022-09-12[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416)Wayne
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. Co-authored-by: Wayne Lin <[email protected]>
2022-09-11完善README文件的格式Harrypotter-zhs
2022-09-11[tools/link-order] Sort objects so that compilation can be done in a fixed ↵childerxxx
link order.
2022-09-09Revert "[tools/link-orger]Sort objects before generate building target to ↵Man, Jianting (Meco)
get same link-order/map files/BIN files from the same source files." This reverts commit 0cb62113729b1dde7d1898b759f435f8173b7b40.
2022-09-09[imxrt1170]update sdk files (#6405)xiao xie
* update sdk files * add dcd config * format files * formating file
2022-09-09A comment has been added (#6398)lpy
2022-09-09[tools/link-orger]Sort objects before generate building target to get same ↵lanyang
link-order/map files/BIN files from the same source files.
2022-09-09对README文件中的大小写和文章格式修改Harrypotter-zhs
2022-09-09[modify]修改components/drivers/spi/sfud/README.md文件lhylhylhy6
2022-09-08add sdio support (#6385)xiao xie
* add sdio support * update board kconfig * 优化SD卡挂载文件系统 * 使用通用接口实现led的闪烁操作
2022-09-08[RTduino]更新blue-pill引脚分布 (#6400)liYangYang
* [RTduino]更新引脚分布 * update * update readme
2022-09-09[rtduino] [stm32f072] update i2c device readmeMeco Man
2022-09-08修改了ch32 的 readme 文件hg0720
2022-09-08Modify error annotations小李憨憨
2022-09-08更新了README.md和README_zh.md文件中软件包的数量 (#6393)CaiYiming0503
2022-09-08Remove duplicate initialization codeliyangyang
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-29 11:22:15 +0000