| Age | Commit message (Collapse) | Author |
|---|
|
Co-authored-by: BernardXiong <[email protected]>
|
|
* 更新国民技术BSP架构，添加N32H7xx系列BSP
* 修改clang_format-ignore文件,根据反馈修改n32h7xxx/libraries/N32_Drivers/nano/*下的文件格式，修改n32h7xxx/n32/n32hxxx/n32h760zil7-stb/applications/main.c文件，区别处理Nano下头文件包含
* 将N32 BSP的.clang-format-ignore文件放入libraries同级目录
* 忽略库文件格式检查
* 解决N32 BSP project.ewp和project.uvprojx冲突
* 更新RTT最新同步
|
|
|
|
during shift pending
Use the generic SecondFraction/SubSeconds formula when SSR/PRER are available.
If SHPF is present and a shift is pending, keep tv_usec at 0.
Platforms without SSR/PRER (e.g. F1) default to 0.
|
|
|
|
overruns
- Add CAN_ISR_DRAIN_LIMIT (default 3) to cap ISR work
- Drain multiple frames per RX0/RX1 interrupt to reduce FIFO FULL/OVERRUN
|
|
|
|
|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
Signed-off-by: sakumisu <[email protected]>
|
|
|
|
(#11158)
|
|
Signed-off-by: sakumisu <[email protected]>
|
|
[tools][cmake] fix type handling when generating CMake targets
[Root Cause]
Unexpected macro definition types during `scons --target=cmake`
could trigger a TypeError and abort CMakeLists.txt generation.
[Solution]
Add support for handling different macro definition types.
[Affect Area]
cmake.py
[Test Suggestion]
Run `scons --target=cmake` and verify CMakeLists.txt is generated
successfully with different macro definition formats.
|
|
|
|
|
|
Problem:
When enumerating device tree nodes, platform bus and native buses (I2C/SPI)
may create duplicate devices for the same OFW node, causing cross-bus conflicts.
This triggers assertion failure '(dev->bus != new_bus)' in
rt_bus_reload_driver_device() during boot on minimal DM-enabled systems.
Root Cause:
1. Platform bus tries to reload devices that already belong to other buses
by calling rt_bus_reload_driver_device(dev->bus, dev), which violates
the API contract (requires dev->bus != new_bus).
2. Native buses (I2C/SPI) do not mark OFW nodes as occupied, so platform
bus creates duplicate platform devices for I2C/SPI client nodes.
Solution:
1. components/drivers/core/platform_ofw.c: Return RT_EOK when np->dev exists,
letting the native bus handle device lifecycle instead of cross-bus reload.
2. components/drivers/i2c/dev_i2c_bus.c: Mark i2c_client_np->dev during scan
to prevent platform bus from duplicating I2C client devices.
3. components/drivers/spi/dev_spi_bus.c: Mark spi_dev_np->dev during scan
to prevent platform bus from duplicating SPI devices.
Tested on Spacemit K1 RISC-V platform with minimal DM configuration.
Signed-off-by: lhxj <[email protected]>
|
|
|
|
(#11138)
[tool] tools/targets/vsc.py : improve compile_commands handling and workspace excludes
- broaden source file extension detection to include C++ and asm
- resolve compile_commands path to absolute and pass its directory to clangd
- limit excludes scan to rt-thread/packages and always include board/linker_scripts
|
|
Fix & Improve: fix touch event bug with LVGL
Fix touch event bug with LVGL.
Improve the touch sliding experience of resistive screens.
[ci][stm32f407] add lcd attach config CI check
Fix: minor modification
Fix format issue.
Fix Ci attach file.
|
|
different thread priorities
|
|
|
|
|
|
|
|
Add sdcard detect before mount in case auto mount failed.
|
|
|
|
definition with RT_USING_DM (#11100)
* Initial plan
* [risc-v][common64] Make rt_hw_cpu_shutdown weak to fix multiple definition error
Co-authored-by: BernardXiong <[email protected]>
---------
Co-authored-by: copilot-swe-agent[bot] <[email protected]>
Co-authored-by: BernardXiong <[email protected]>
|
|
|
|
Correct the starting virtual address of _reset alignment to 16MB
|
|
|
|
|
|
RK3588/RK3576/RK356x/RK3308
Signed-off-by: GuEe-GUI <[email protected]>
|
|
新增 ft32f407xe-starter 板级支持
|
|
|
|
* [FIX][fal]补充缺失的入参，适配DFSv2框架
* [FIX][fal]正确声明入参的数据类型
* [chg]按审查建议修改变量类型和代码格式。
|
|
|
|
|
|
dentry functions.
|
|
* add mcxa346-RTduino
|
|
|
|
- Add RT_USING_SPI_BITOPS as a separate configurable option
- Make RT_USING_SOFT_SPI depend on RT_USING_SPI_BITOPS
- Adjust build order in SConscript for proper com
Signed-off-by: Runcheng Lu <[email protected]>
|
|
* [docs][libcpu][arm][cortex-a] add comment for mmu.h
* [docs][libcpu][arm][cortex-a] beautify comment for mmu.h
* [docs][libcpu][arm][cortex-a] delete extra space at the end of lines
|
|
virtio_queue_destroy #11114
|
|
|
|
便于 git管理
|
|
revise the README.md
|
|
引用未定义变量导致编译报错的问题
|
|
|
|
* [sdio][dm] import Kconfig for DM
Signed-off-by: GuEe-GUI <[email protected]>
* [sdio] fixup IRQ and mmcsd threads' stack size default
Signed-off-by: GuEe-GUI <[email protected]>
* [sdio][dm] Support DM mode
1. Support features read by DM.
2. Support regulator API in drivers.
3. Support send tuning option CMD.
4. Replace `switch_uhs_voltage` by `signal_voltage_switch`.
Signed-off-by: GuEe-GUI <[email protected]>
* [dm][sdhci] Cleanup the SDHCI
Signed-off-by: GuEe-GUI <[email protected]>
* [sdio][dm] add new SDIO/SDHCI drivers
1. SDHCI support on PCI bus
2. Synopsys DesignWare MMC Family(MMIO/PCI)
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
