| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Fixed #9968
1.Using scripts in rttpkgtool to make firmware.
2.Deleted duplicate prebuild files.
3.Modify README.md
Signed-off-by: YunZhan Huang <[email protected]>
|
|
In actual operation, we often forget how to connect
the wires, so we just put the schematic diagram in
the readme document for quick recall.
Signed-off-by: Chen Wang <[email protected]>
|
|
This patch fixed the error "bash: mksdimg.sh: No such file
or directory" when building cv18xx_aarch64.
The issue is introduced by commit "bsp: cvitek: removed
useless files after using rttpkgtool".
In addition, in order to unify the logic with riscv as much
as possible, the name of the "milkv-duo256m" directory under
cv18xx_aarch64 is uniformly changed to "duo256m".
This patch also improve the README, adding instructions to
install xz-utils.
Signed-off-by: Chen Wang <[email protected]>
|
|
For bsp/cvitek, duo256m, the operation process is
slightly different when building images for riscv
and arm64.
To improve the user experience, unify the building
process and steps of the two as follows:
- Enter c906_little and execute `scons`
- Enter cv18xx_riscv/cv18xx_aarch64 and execute `scons`
That's all. Finally, we can get `fip.bin` and
`boot.sd` under `bsp/cvitek/output/milkv-duo256m`.
Update the README.md accordingly.
Signed-off-by: Chen Wang <[email protected]>
|
|
Duo's CPU combination is more complicated:
| BSP | B/L core| ISA | UART |
| ------------- | ------- |---------------- |-------|
| cv18xx_risc-v | Big | RISC-V C906 | UART0 |
| c906-little | Littel | RISC-V C906 | UART1 |
| cv18xx_aarch64| Big | ARM Cortex A53 | UART0 |
Printing ISA and big and small core information
during the boot process helps developers/testers
determine the CPU and serial port corresponding to
the current console.
In addition, the RTT logo printing has already
distinguished whether it is smart, so the bsp
printing no longer distinguishes.
Updated README to sync with this change.
Signed-off-by: Chen Wang <[email protected]>
|
|
Confirmed with milkv, only the sd card version is sold
by default for duo in the market. The spi pins are
provided through stamp holes, so that users can solder
the corresponding components on their baseboard during
secondary development.
In order to simplify maintenance work, the mainline
will only support the sd-card version and no longer
support spinor/spinand.
Updated config files the same in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
duo is a real hardware, no need for virtio.
Disable RT_USING_VIRTIO and update configuration to latest.
Signed-off-by: Chen Wang <[email protected]>
|
|
Re-write README.md for aarch64.
Signed-off-by: Chen Wang <[email protected]>
|
|
Move the combine.sh to under cv18xx_aarch64, so we can
run this script the same as scons and no need to change
cwd.
Rename the folder boot to prebuild just becuase all the
files under boot are prebuild binaries.
Move the prebuilt fip.bin to under prebuild/milkv-duo256m
because it's only for 256.
Update combine.sh accordingly and output fip.bin to the output
folder where we create fip.bin/boot.sd as other bsp.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
Analysis: Some macro definition names are not standardized
and lack prefixes.
Solution: Add BSP_ prefix to GPIO_IRQ_BASE SYS_GPIO_IRQ_BASE
PLIC_PHY_ADDR TIMER_CLK_FREQ UART_IRQ_BASE I2C_IRQ_BASE.
Signed-off-by: Shicheng Chu <[email protected]>
|
|
For bsp/cvitek, all drivers related files are moved to the directory
bsp/cvitek/drivers, so the drivers_path_prefix processing in the
SConstruct of the three bsp projects can be simplified.
Signed-off-by: Chen Wang <[email protected]>
|
|
The aarch64 core of duo on the master cannot enter the
console interface. It can only print the RT flag and hold it.
Analysis: The latest commit that can work is ae6a328 ("Add
psoc62, 61 config"). This phenomenon will occur after adding
754c59a ("[Feature] DFS mount auto by kernel parameters").
The specific reason is that when aarch bsp enables the device
tree, the current u-boot will pass in bootargs, which contains
"root=/dev/mmcblk0p2 rootwait rw", which means that the
kernel is required to wait until the rootfs in /dev/mmcblk0p2
loaded successfully. However, the current aarch64 bsp default
does not implement sdmmc device mounting, causing the
kernel file system mounting module (rootfs_mnt_init() of
components/drivers/core/mnt.c) to enter an infinite loop waiting.
Solution: At present, we do not plan to modify the startup
parameters of u-boot. The temporary solution adopted is to
create a pseudo /dev/mmcblk0p2 device during the board
initialization process, and then cancel the pseudo device
after mnt is completed. This allows the kernel boot to be
completed successfully.
Signed-off-by: Shicheng Chu <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
|
|
bsp: cvitek: add missing soc type for aarch64
|
|
When compiling CV18xx_arch64, have a error:
can not find "rt_fdt_commit_memregion_early"
Analysis: b785ef9 ("[libcpu][aarch64]memory setup using memblock ")
no longer support "rt_fdt_commit_memregion_early", become use
"rt_memblock_reserve_memory"
Solution: Refer to the bsp/qemu-virt64-aarch64/drivers/board.c
delete "rt_fdt_commit_memregion_early"
Signed-off-by: Shicheng Chu <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
|
|
When compiling CV18xx_arch64, there are the following errors:
1. missing soc type for aarch64
2. uart device objects defined but not used
Analysis: a63c07f ("bsp: cvitek: new design for pinmux") and
114e143("bsp:cvitek: add pinmux for uart"), CV18xx_arch64 is not
considered.
Solution: Refer to the cv18xx_riscv format to add the corresponding
chip type SOC_Type_SG2002, as well as the corresponding macro
for the serial port pins and interrupts
Signed-off-by: Shicheng Chu <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
|
|
|
|
|
|
|
|
Initialize the board using the device tree
|
|
small core
支持将rtthread.bin和dtb文件合成boot.sd文件，使用uboot直接通过bootcmd命令启动rtthread内核。
支持构建带有小核riscv程序的fip.bin文件，保证在运行arm大核的同时运行小核的riscv程序。
|
|
256M开发板中支持ARM核运行RT-Thread标准版和Smart版内核 (#8800)
* Supports ARM core of Milk-V Duo 256M development board
* add fip.bin(arm)
|
