| Age | Commit message (Collapse) | Author |
|---|
|
Confirmed with milkv, only the sd card version is sold
by default for duo in the market. The spi pins are
provided through stamp holes, so that users can solder
the corresponding components on their baseboard during
secondary development.
In order to simplify maintenance work, the mainline
will only support the sd-card version and no longer
support spinor/spinand.
Updated config files the same in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
1. switches memory management to SLA
2. use ioremap modification driver
Signed-off-by: flyingcys [email protected]
|
|
Some drivers use INIT_BOARD_EXPORT, it is not necessary,
it is enough to use INIT_DEVICE_EXPORT for genearl drivers.
Signed-off-by: Chen Wang <[email protected]>
|
|
Board level pin available info is summarized and list here for memo:
Duo:
NAME PWM CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
PWM-1
GP9 PWM4 PWR_GPIO[18] SD1_D3__PWM_4
GP12 PWM4 XGPIOA[16] UART0_TX__PWM_4
GP4 PWM5 PWR_GPIO[19] SD1_D2__PWM_5
GP13 PWM5 XGPIOA[17] UART0_RX__PWM_5
GP5 PWM6 PWR_GPIO[20] SD1_D1__PWM_6
GP8 PMW7 PWR_GPIO[21] SD1_D0__PWM_7
PWM-2
GP7 PWM8 PWR_GPIO[22] SD1_CMD__PWM_8
GP6 PWM9 PWR_GPIO[23] SD1_CLK__PWM_9
GP2 PWM10 PWR_GPIO[26] SD1_GPIO1__PWM_10
GP3 PWM11 PWR_GPIO[25] SD1_GPIO0__PWM_11
Duo256:
NAME PWM CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
PWM-1
GP9 PWM4 PWR_GPIO[18] SD1_D3__PWM_4
GP12 PWM4 XGPIOA[16] UART0_TX__PWM_4
GP4 PWM5 PWR_GPIO[19] SD1_D2__PWM_5
GP13 PWM5 XGPIOA[17] UART0_RX__PWM_5
GP3 PWM6 XGPIOA[18] JTAG_CPU_TCK__PWM_6
GP5 PWM6 PWR_GPIO[20] SD1_D1__PWM_6
GP2 PWM7 XGPIOA[19] JTAG_CPU_TMS__PWM_7
GP8 PMW7 PWR_GPIO[21] SD1_D0__PWM_7
PWM-2
GP7 PWM8 PWR_GPIO[22] SD1_CMD__PWM_8
GP6 PWM9 PWR_GPIO[23] SD1_CLK__PWM_9
GP10 PWM10 XGPIOC[14] PAD_MIPI_TXM1__PWM_10
GP11 PWM11 XGPIOC[15] PAD_MIPI_TXP1__PWM_11
Signed-off-by: Chen Wang <[email protected]>
|
|
* bsp: cvitek: kconfig: add wdt for cv18xx_riscv
Add Watchdog timer in Kconfig.
Signed-off-by: Chen Wang <[email protected]>
* drv: cvitek: remove using macro from source file
Building of source file should be controlled by SConscript,
but not in source file itself.
Signed-off-by: Chen Wang <[email protected]>
* bsp: cvitek: kconfig: add i2c for cv18xx_riscv
Add I2C in Kconfig for c906B.
Note, the IRQ# is different from that of c906L.
Signed-off-by: Chen Wang <[email protected]>
* bsp: cvitek: kconfig: add rtc for cv18xx_riscv
Add RTC in Kconfig for c906B.
Signed-off-by: Chen Wang <[email protected]>
* bsp: cvitek: fix channel issue for pwm driver
The original code confuses the concepts of controllers and channels.
Fixed it and do some code cleanup.
Signed-off-by: Chen Wang <[email protected]>
* bsp:cvitek: add i2c pinmux config for cv18xx_riscv
Pinmux in driver code is controlled by SOC type, bcos driver
code should be general and support all pins defined by SoC.
Pinmux configuration in Kconfig is controlled by BOARD type,
bcos when we operate on board, it does not expose all chip-level
pin signals and we can only use part of them.
Following is I2C signals exported by duo family. Details see
https://milkv.io/docs/duo/overview.
Note: we have not added support for duo-S.
Duo
===
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL
GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo 256m
========
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL
GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo S
=====
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL
J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL
J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA
J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL
J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL
J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA
J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA
J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL
J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL
J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA
J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA
Signed-off-by: Chen Wang <[email protected]>
Signed-off-by: flyingcys <[email protected]>
* bsp:cvitek: remove using macro from source file for i2c
Signed-off-by: Chen Wang <[email protected]>
* bsp:cvitek: unify menu message text for i2c as other drivers
Other dirvers has no extra word "HW".
Signed-off-by: Chen Wang <[email protected]>
* bsp:cvitek: add i2c pinmux config for c906_little
Porting what we have done in commit "bsp:cvitek: add i2c pinmux config
for cv18xx_riscv" to c906_little.
Signed-off-by: Chen Wang <[email protected]>
---------
Signed-off-by: Chen Wang <[email protected]>
Signed-off-by: flyingcys <[email protected]>
Co-authored-by: flyingcys <[email protected]>
|
|
Signed-off-by: Jingbao Qiu <[email protected]>
|
|
|
