| Age | Commit message (Collapse) | Author |
|---|
|
Confirmed with milkv, only the sd card version is sold
by default for duo in the market. The spi pins are
provided through stamp holes, so that users can solder
the corresponding components on their baseboard during
secondary development.
In order to simplify maintenance work, the mainline
will only support the sd-card version and no longer
support spinor/spinand.
Updated config files the same in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
1. switches memory management to SLA
2. use ioremap modification driver
Signed-off-by: flyingcys [email protected]
|
|
After first called from uart open, the dw8250_uart_configure
API cannot be called again. Otherwise, this will mess up the
device, and uart will not act properly to interrupt again.
Analysis: Configure uart device will close recive interrupte,
causing uart device to malfunction.
Solution: After configure uart device, enable the device's
recive interrupte.
Signed-off-by: Shicheng Chu <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
|
|
Supports both big and little cores of RISC-V C906,
but does not support ARM cores. Currently, only UART
drivers are supported on the peripherals.
Signed-off-by: Shicheng Chu <[email protected]>
|
|
Board level UART pinmux summary, following capability
should be controlled by pinname whitelist.
Duo:
NAME UART CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP13 UART0_RX XGPIOA[17] UART0_RX__UART0_RX
GP12 UART0_TX XGPIOA[16] UART0_TX__UART0_TX
GP1 UART1_RX XGPIOA[29] IIC0_SDA__UART1_RX
GP13 UART1_RX XGPIOA[17] UART0_RX__UART1_RX
GP0 UART1_TX XGPIOA[28] IIC0_SCL__UART1_TX
GP12 UART1_TX XGPIOA[16] UART0_TX__UART1_TX
GP1 UART2_RX XGPIOA[29] IIC0_SDA__UART2_RX
GP5 UART2_RX PWR_GPIO[20] SD1_D1__UART2_RX
GP0 UART2_TX XGPIOA[28] IIC0_SCL__UART2_TX
GP4 UART2_TX PWR_GPIO[19] SD1_D2__UART2_TX
GP5 UART3_RX PWR_GPIO[20] SD1_D1__UART3_RX
GP4 UART3_TX PWR_GPIO[19] SD1_D2__UART3_TX
GP3 UART4_RX PWR_GPIO[25] SD1_GPIO0__UART4_RX
GP2 UART4_TX PWR_GPIO[26] SD1_GPIO1__UART4_TX
Duo 256m:
NAME UART CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP13 UART0_RX XGPIOA[17] UART0_RX__UART0_RX
GP12 UART0_TX XGPIOA[16] UART0_TX__UART0_TX
GP1 UART1_RX XGPIOA[29] IIC0_SDA__UART1_RX
GP3 UART1_RX XGPIOA[18] JTAG_CPU_TCK__UART1_RX
GP13 UART1_RX XGPIOA[17] UART0_RX__UART1_RX
GP0 UART1_TX XGPIOA[28] IIC0_SCL__UART1_TX
GP2 UART1_TX XGPIOA[19] JTAG_CPU_TMS__UART1_TX
GP12 UART1_TX XGPIOA[16] UART0_TX__UART1_TX
GP1 UART2_RX XGPIOA[29] IIC0_SDA__UART2_RX
GP5 UART2_RX PWR_GPIO[20] SD1_D1__UART2_RX
GP0 UART2_TX XGPIOA[28] IIC0_SCL__UART2_TX
GP4 UART2_TX PWR_GPIO[19] SD1_D2__UART2_TX
GP5 UART3_RX PWR_GPIO[20] SD1_D1__UART3_RX
GP4 UART3_TX PWR_GPIO[19] SD1_D2__UART3_TX
Note: this patch also update the .config and rtconfig.h
because this patch modify some configuration items's name,
for example: RT_USIMG_UART0 -> BSP_USING_UART0.
FIXME: only handle RISC-V related, no ARM.
Signed-off-by: Chen Wang <[email protected]>
|
|
Initialize the board using the device tree
|
|
256M开发板中支持ARM核运行RT-Thread标准版和Smart版内核 (#8800)
* Supports ARM core of Milk-V Duo 256M development board
* add fip.bin(arm)
|
|
|
