| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2025-03-17 | [fix][bsp] GD32: fixed SPI adn SPI flash drivers | Dmitriy | |
| 2024-11-13 | [bsp][gd32][fix rtc clock selection] | WwWangGuan | |
| 2024-11-02 | [BSP][GD32]add gd32e503v-eval | zhangjianwu | |
| 2024-09-13 | [drivers] Specifies the name of the drivers driver file | CXSforHPU | |
| https://github.com/RT-Thread/rt-thread/pull/9420 | |||
| 2024-09-13 | [bsp][gd32]Fix the problem that uartv2 does not enable dma compilation error. | Rbb666 | |
| 2024-07-29 | fix: remove extra space at the end of files | wirano | |
| 2024-07-29 | uart: add support for gd32h7xx | wirano | |
| 2024-07-29 | gpio: add gd32h7xx support | wirano | |
| 2024-07-29 | add GD32H7xx library | wirano | |
| 2024-05-02 | [bsp][gd32] ↵ | Junjie Wang | |
| 修复串口驱动中由于可能的中断嵌套而导致RB索引异常的问题 | |||
| 2024-04-29 | [i2c] adjust the timing for I2C initialization | LZerro | |
| 2024-03-24 | [bsp] format drivers code | Meco Man | |
| 2024-03-24 | [bsp][drv_gpio] fix the error code return when pin number is illegal | Meco Man | |
| 2024-03-23 | [pin] pin_read/write rt_uint8_t to rt_ssize_t | kk | |
| 2024-03-20 | [bsp][gd32][drivers] add serial v2 and dma driver support | Evlers | |
| 2024-03-20 | [bsp][gd32]Update mdk project | Yaochenger | |
| 2024-02-19 | [GD32_ARM] Fix bugs in drv_adc when enable multiple channel. | Jiangrunnan | |
| 2024-01-21 | [BSP][GD32]add gd32407v-lckfb (#8496) | yuanzihao | |
| 2024-01-18 | [bsp][renesas] RTduino configuration update | kurisaw | |
| sync update some optimize [bsp][driver] Updates the naming convention of the i2c configuration item | |||
| 2023-08-20 | [bsp][gd32]添加 立创开发板 GD32F470 的 ↵ | yuanzihao | |
| SDRAM驱动，从STM32的drv_sdram.c修改而来 | |||
| 2023-06-06 | [bsp][gd32]添加 GD32F303 的 pwm 驱动 | ZengJianwei | |
| 2023-06-03 | [bsp][gd32]fixed sf probe error | JasonCang | |
| 2023-05-17 | [gd32][spi] add spi3\spi4 support and rt_hw_spi_device_attach | forest-rain | |
| 2023-05-08 | [bsp] fix mismatched function types in rt_pin_ops for all drv_gpio.c (#7457) | Placebo27 | |
| 2023-04-17 | [HUST CSE] Fix many abnormal symbols in annotations and format code | 7YZ7 | |
| 2023-03-20 | [errno code][-RT_ERROR] fix that use RT_ERROR without - | Meco Man | |
| 2023-03-16 | [error code][-RT_EIO] fix that use RT_EIO without - | Meco Man | |
| 2023-03-10 | [GD32]add gd32470z-lckfb (#7022) | yuanzihao | |
| * --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植 * -修改模板keil工程的配置，IROM需要注意总共为1024k，分为Code area 和Data area ，IRAM1为 ： 512K-64K=448K=458752=0x70000。 -重新用ENV生成编译固件 片上SRAM可分为4块，分别为SRAM0（112KB）、SRAM1（16KB）、SRAM2（64KB）和TCMSRAM（64KB）。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问，然而，TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问。BKPSRAM（备份SRAM）应用于备份域，即使当VDD供电电源掉电时，该SRAM仍可保持其内容。附加SRAM（ADDSRAM）只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵，上述SRAM块可以同时被不同的AHB主机访问，例如，即使CPU正在访问SRAM0，USBHS也可以访问SRAM1。 * -修改IAR编译的链接脚本 * --修改Flash和RAM大小 -RAM大小为448k是因为512K-64K=448K，其中后面的64K为TCMSRAM（紧耦合存储器SRAM）只可被Cortex ® -M4内核的数据总线访问，先不要乱分配 * -修改MDK链接脚本 * -修改board.h * -修改MCU型号 * -Finsh控制台和LED1闪灯程序工作正常，串口控制台名称错误，从uart改为uart0 -Scons正常生成工程 * -发现GD32固件库当前没有240Mhz的时钟配置，将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04 * -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件 * -修改led1和change logs * -按照提交规范使能 One ELF Section per Function（MDK） 并用scons重新生成工程 * -发现整个GD32的IAR模板工程template.eww 是没有的，所以当前是不支持IAR开发的，需要后面学习一下IAR使用再实现了。 * -使用formatting源码格式化工具跑一边gd32470z-lckfb目录 * -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c] -三个月前的提交多了几个空格 | |||
| 2023-02-07 | rt_device_write/read return data type as rt_ssize_t | Meco Man | |
| rt_ssize_t can give negative error code, which follows the unix style correctly | |||
| 2023-01-08 | format Kconfig and sconscript | Meco Man | |
| 2022-11-24 | [GD32] fix bug on spi driver (#6636) | ccx-lan | |
| * fix bug on spi driver * [gd32] fix bugs on spi driver | |||
| 2022-11-07 | 修改I2C0_BUS_CONFIG定义错误 | xiaoxiaolisunny | |
| 修改drv_soft_i2c.h中I2C0_BUS_CONFIG定义错误问题。 | |||
| 2022-07-25 | [gd32/arm/libraries]: correct pin number in drv_gpio.c; fix compile error if ↵ | charlown | |
| use rtc in gd32 f1~f4 (#6172) * [gd32/libraries]: fix compile error in rtc: "pmu_backup_write_enable" was not found. * [gd32/arm/libraries/gd32_drivers/drv_gpio.c] correct gpio number. | |||
| 2022-07-23 | feat(bsp/gd32f1-f4/drv_sdio):增加gd32下sdio驱动 (#6176) | jiezhi320 | |
| 2022-07-20 | fix(bsp gd32f450 ↵ | jiezhi320 | |
| gcc):修复中断向量表缺失相关定义导致中断异常的问题 (#6174) | |||
| 2022-06-28 | [bsp/gd32]Optimize GD32 bsp architecture (#6108) | BruceOu | |
| * [bsp/gd32]Optimize GD32 bsp architecture | |||
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |