| Age | Commit message (Collapse) | Author |
|---|
|
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <[email protected]>
* update
Signed-off-by: Fan YANG <[email protected]>
Co-authored-by: Meco Man <[email protected]>
|
|
* 添加hc32f460系列外设WDT驱动
* format kconfig
* Update drv_wdt.c
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
|
|
/* Enable error interrupt */
NVIC_EnableIRQ(uart->config->rxerr_irq.irq_config.irq_num);
上述代码使能错误接收中断后需要使能串口的接收中断`USART_INT_RX`才可以正常触发中断
|
|
off状态时死机问题，修复can滤波器设置失效问题 (#6083)
* [bsp][hc32]fix can bus driver bug.
1. 更改硬件滤波器数量为8，和手册描述一致。
2. 修复_can_control()函数，RT_CAN_CMD_SET_FILTER指令，当应用层ID超出29bit时导致滤波器失效的问题。
3. 修改_can_control()函数，RT_CAN_CMD_SET_FILTER指令，
可同时支持标准帧和扩展帧。
4. 修复can总线故障关闭时，程序一直卡在中断中无法退出的问题。
5. 针对can收发器硬件STB引脚，增加宏定义CAN1_STB_FUNC_ENABLE，适配没有STB引脚的收发器。
This reverts commit 7fcd8e9afc68eecf5fecc4cb6f9acc4fe76c2796.
|
|
* 添加HC32F460系列RTC外设驱动
|
|
* fix bugs of hc32 driver adc and can
|
|
* 添加HC32F460系列ADC外设驱动支持
|
|
|
|
[bsp][HC32] 修复使用多串口的描述符被覆盖的问题
|
|
|
|
* HC32F460 supported
Co-authored-by: JamieTx <[email protected]>
Co-authored-by: Jamie <[email protected]>
|
|
* Unified management interrupt vector table.
|
|
* Add the BSP of HC32 series.
|
