| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2018-05-21 | Merge pull request #1442 from qgyhd1234/phy_fire | Bernard Xiong | |
| [网络驱动]：优化 phy_init() 函数 | |||
| 2018-05-21 | [网络驱动]：优化 phy_init() 函数 | zylx | |
| 2018-05-13 | Merge pull request #1427 from qgyhd1234/eth_fire | Tanek | |
| [驱动]：添加野火1052 drv_eth.c 和phy.c 文件 | |||
| 2018-05-11 | [驱动]：添加野火1052 drv_eth.c 和phy.c 文件 | zylx | |
| 2018-05-11 | [修改]:修改HyperFlash启动文件 | zylx | |
| 2018-05-10 | [BSP][RT1050] improve sdio stability and speed. | ↵ | liu2guang | |
| 优化SDIO接口稳定性和速度. 1.格式化代码. 2.优化SDIO接口稳定性和速度: 将SDIO时钟树中分频数增大, 提高内部时钟的稳定性, 同时SDIO速度提高到30M. 并且通过USB拷贝12M MP3文件测试, 多次拷贝数据稳定. | |||
| 2018-05-09 | Merge pull request #1414 from liu2guang/master | Tanek | |
| [BSP][RT1050] Fix RT1050 PIN 125~127 reg addr error. | 修复PIN驱动125~127… | |||
| 2018-05-08 | Merge pull request #1322 from heyuanjie87/imx1050 | Tanek | |
| Imx1050 | |||
| 2018-05-08 | [BSP][RT1050] Fix RT1050 PIN 125~127 reg addr error. | ↵ | liu2guang | |
| 修复PIN驱动125~127引脚寄存器地址错误. | |||
| 2018-05-05 | add Seeed Studio RT-M7 board support.|添加Seeed Studio RT-M7开发板支持 | guozhanxin | |
| 2018-05-04 | add ATK board support. | guozhanxin | |
| 2018-05-04 | 修正数据大小导致assert | heyuanjie | |
| 2018-05-02 | [bsp][imxrt1052-evk] change sdio default speed to 25M | liang yongxiang | |
| 2018-05-02 | [bsp][imxrt1052-evk] update enet driver: revert all change for fsl_enet.c | liang yongxiang | |
| 2018-05-02 | 刷新cache | heyuanjie | |
| 2018-05-02 | Merge branch 'master' of https://github.com/RT-Thread/rt-thread into imx1050 | heyuanjie | |
| 2018-04-26 | Merge pull request #1377 from balanceTWK/master | Tanek | |
| [BSP][imxrt1052] add baudrate options, Delete simulate i2c . | |||
| 2018-04-23 | [Bsp][i.mx rt] SDIO Upper speed | zyh | |
| 2018-04-23 | [Bsp][i.mx rt]USB device support HS | zyh | |
| 2018-04-23 | [BSP][imxrt1052] add baudrate options, Delete simulate i2c . | balanceTWK | |
| 2018-04-21 | Merge pull request #1375 from uestczyh222/master | Bernard Xiong | |
| Add USB driver to fire | |||
| 2018-04-20 | Add USB driver to fire | zyh | |
| 2018-04-20 | [imx rt]mdk memcpy导致基地址崩溃 | heyuanjie | |
| 2018-04-17 | Add drv_hwtimer | wbhb1234 | |
| 2018-04-13 | [BSP][imxrt1052-evk] fix rt_i2c_transfer bug. | zylx | |
| 2018-04-13 | [BSP][RT1050] fix rt1050 bsp bug and update code. | 修复RT1050 BSP ↵ | liu2guang | |
| bug并更新代码. 修复以下问题: 1. 修复当配置BSP为野火开发板时, 编译无法通过问题.。 2. 修复ft5406驱动挂载i2c总线到i2c1 bus。 3. 修复spibus时钟分频数错误，并修复所有spi bus都关闭时编译警告。 更新代码: 1. 移除rtgui相关初始化代码.。 2. 导出lcd相关配置参数：HSW/HFP/HBP/VSW/VFP/VBP/Backlight pin/Reset pin/width pixel/height pixel。 3. 当配置BSP为野火板子时, 默认添加sdio驱动。 | |||
| 2018-04-08 | [bsp][imxrt1052-evk] update eth driver | liang yongxiang | |
| - fixed eth send frame bug - code clean | |||
| 2018-04-06 | [bsp][imxrt1052] add hardware i2c | balanceTWK | |
| 2018-04-04 | [bsp][imxrt1052] add cache interface support | liang yongxiang | |
| 2018-04-01 | 修正iis驱动 | heyuanjie | |
| 2018-03-31 | [BSP][RT1050] Optimized spi bus driver. | 优化spi驱动. | liu2guang | |
| 1. menuconfig中导出spi总线IO选择配置. 2. menuconfig中导出spi总线时钟源配置. 3. 限制spibus总线速度最大为40MHz. | |||
| 2018-03-30 | [BSP] add spi bus driver. | 添加spi总线驱动. | liu2guang | |
| 2018-03-29 | [BSP][i.mxrt1052] fix uart | balanceTWK | |
| 2018-03-29 | Merge pull request #1328 from SummerGGift/2018329 | Tanek | |
| [bsp][imxrt1052-evk]: fix parameter type incompatible error | |||
| 2018-03-29 | [bsp][imxrt1052-evk]: fix parameter type incompatible error | SummerGift | |
| 2018-03-28 | 添加iis驱动 | xx | |
| 2018-03-27 | [BSP] add fire board support and optimize ↵ | liuguang | |
| bsp.|添加野火开发板支持并优化bsp. 1. 添加env menuconfig可以选择nxp官方或者野火开发板. 2. 修改drv_hp_rtc名称为drv_rtc. | |||
| 2018-03-23 | Merge remote-tracking branch 'upstream/master' | liuguang | |
| 2018-03-23 | [BSP] delete rtc driver error message. | 删除RTC驱动的错误信息. | liuguang | |
| 2018-03-23 | Merge remote-tracking branch 'upstream/master' | ZYH | |
| 2018-03-23 | [Bsp][i.mxrt]Add USB Drivers support HS | ZYH | |
| 2018-03-20 | [BSP] fix pin drive bug and add interrupt mode. | ↵ | liuguang | |
| 修复PIN驱动BUG并添加中断模式. 更新如下: 1. 修复GPIO5_0~2管脚复用调用错误(错误情况会影响SDRAM正常工作)。 2. 添加中断模式，支持上升沿、下降沿、双边沿、高电平、低电平触发中断模式。 3. 移除C99特性。 | |||
| 2018-03-19 | [BSP] add other uart|添加其他串口 | balanceTWK | |
| 2018-03-18 | [bsp]add other uart | 添加其他串口支持 | balanceTWK | |
| 2018-03-18 | drv_uart | balanceTWK | |
| 2018-03-18 | del usart.c usart.h | balanceTWK | |
| 2018-03-18 | add drv_uart.c drv_uart.h | balanceTWK | |
| 2018-03-16 | [BSP] fix uart driver bug. | 修复串口驱动BUG. | liuguang | |
| 2018-03-16 | [BSP] add rt1050 hp rtc driver.| 添加RT1050 高功耗RTC驱动. | liuguang | |
| 2018-03-15 | [BSP] add rt1050 pin driver code. | 添加rt1050 PIN驱动代码. | liuguang | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |