summaryrefslogtreecommitdiff
path: root/bsp/imxrt
AgeCommit message (Collapse)Author
2020-12-28resolve Conflictsyangjie
bsp/nrf52832/board/Sconscript bsp/nrf52832/startups/Sconscript bsp/raspberry-pi/raspi4-32/driver/SConscript
2020-11-23Update drv_can.hDavid Lin
2020-11-20[SConscript]rename group nameyangjie11
2020-10-14修改了一些文件头的copyright信息和Change LogWangQiang
2020-10-12修改了README文件WangQiang
2020-10-121. 去掉了多余的测试打印信息WangQiang
2. 恢复了1052的BSP的初始配置
2020-10-12修改了imxrt1052-nxp-evk的BSP的以太网相关配置，用于适配PHY模型WangQiang
2020-10-121. ↵WangQiang
抽象了PHY的设备模型，在components中增加了PHY设备的相关代码以及KCONFIG配置和SConscript脚本 2. 在IMXRT的Libraries中增加了peripherals目录，用于具体型号的设备驱动相关的代码的实现，不应与MCU的平台相关，实现PHY的设备对象中的相关接口。 3. 修改了BSP中的Sconstruct文件，增加了peripherals目录的构建 4. 修改了KEIL环境的SCT文件，用于实现以太网功能
2020-10-12增加了imxrt1064-nxp-evk的BSP的以太网功能WangQiang
2020-09-11Merge pull request #3897 from yangjie11/yj_dev1Bernard Xiong
[components][driver/pin.c]pin 框架增加 rt_pin_get
2020-09-11[bsp][driver] 初始化 BSP 中的 rt_pin_opsyangjie
2020-09-09Update BSP README with EN Version.Cathy Li
2020-09-04Merge pull request #3853 from xfwangqiang/gcc-fixBernard Xiong
[BSP][imxrt]fixed ethernet driver bug for imxrt
2020-09-03fixed SConstruct file spell error in imxrt1064-nxp-evkWangQiang
2020-08-27fixed ethernet driver bug for imxrtWangQiang
2020-08-06fixed gcc assembly option and objcopy option in rtconfig.py for ↵WangQiang
imxrt1052-nxp-evk
2020-07-30fixed gcc assembly option in rtconfig.py for imxrt1064-nxp-evkWangQiang
2020-06-15修复了imxrt下imxrt1052-atk-commander, imxrt1052-fire-pro, ↵WangQiang
imxrt1052-nxp-evk等BSP的scons --dist失败的问题
2020-06-15优化了sdk_dist.py中的dist_do_building函数，不会影响其他BSP的� ↵WangQiang
��用
2020-06-12修复了imxrt1064-nxp-evk的BSP使用scons ↵WangQiang
--dist生成的工程目录中没有libraries的问题
2020-06-06[bsp][imxrt] fix the gpio drivers warning,'int_mode' may be used uninitialized.nongxiaoming
2020-06-05[bsp][imxrt] fix docs and templates errtyustli
2019-12-27remote host configtyustli
2019-12-26solve gcc build errtyustli
2019-12-21[bsp] Remove unnecessary files.Bernard Xiong
2019-10-22[add] default environmentErnest
2019-09-29Merge pull request #3006 from jiezhi320/masterBernard Xiong
fix bug when use HWTIMER_MODE_PERIOD
2019-09-26[bsp] update project configure file for finsh component changechenyong
Signed-off-by: chenyong <[email protected]>
2019-09-21[bsp/imxrt] Remove the use of device user data on uart driver.armink
2019-09-19imxrt:enet: Support imxrt ethernet interfaceGavin Liu
1. Add "drv_eth.c" for all imxrt platforms. 2. Add ksz8081 phy driver for imxrt1052-nxp-evk board. 3. Disable the LED demo in main.c file if enable the ENET and ksz8081 phy, because the PINs of LED and ksz8081 reset are from the same GPIO. 4. Update the relevant Kconfig and Sconscript files. Signed-off-by: Gavin Liu <[email protected]>
2019-09-19imxrt:app: Support ramfs for imxrt1052-nxp-evkGavin Liu
Add ramfs (8MB size) support for imxrt1052-nxp-evk board. Signed-off-by: Gavin Liu <[email protected]>
2019-09-19imxrt:sdram: Add sdram support for imxrt1052-nxp-evkGavin Liu
1. Add sdram item in bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig 2. Add sdram configuration header file for imxrt1052-nxp-evk 3. Update the sdram space assignment for memheap Signed-off-by: Gavin Liu <[email protected]>
2019-09-19imxrt:board: Add LPUART3 item for imxrt1052-nxp-evkGavin Liu
Add LPUART3 item in imxrt1052-nxp-evk Kconfig file to support Arduino UART interface. Signed-off-by: Gavin Liu <[email protected]>
2019-09-19imxrt:uart: Add PINs init for each uart portGavin Liu
Add PINs init function based on the selected UART port. In general, user should configure all necessary PINs based on the specific imxrt board in: bsp/imxrt/xxxx/board/MCUX_Config/pin_mux.c There is a convenient GUI tool named MCUXpresso Config Tools, it's free and can be obtained from NXP offical website. Open the file: bsp/imxrt/imxrt1052-nxp-evk/board/MCUX_Config/MCUX_Config.mex with MCUXpresso Config Tools, set the necessary PINs (or clocks) and generate the new code of pin_mux.c (or clock_config.c), the project can get right configurations based on specific imxrt board. But, there is no relation between RT-Thread Kconfig and MCUXpresso Config Tools. User selects one driver in RT-Thread menuconfig, then the ping_mux.c should be udpated by MCUXpresso Config Tools to set the right PIN configurations for the selected driver. It's clear but a little complex. We add the PIN init functions for some drivers in the board.c file, 1. It's convenient to usr a driver in RT-Thread. Just select the driver, then the code will include all necessary parts, and the driver can work well. 2. User can also configure the PINs with MCUXpresso Config Tools. 3. The drivers in bsp/imxrt/libraries/drivers are common for all imxrt boards. They may have different PIN configurations based on different hardware design. So we put the PIN init functions in each board.c file following each different imxrt board. Signed-off-by: Gavin Liu <[email protected]>
2019-09-11[bsp][Kconfig]在bsp的Kconfig中select组件初始化与user main的选项yangjie
2019-09-05fix spelling mistake for "RT_IDEL_HOOK_LIST_SIZE"LinJieqiang
2019-09-03fix docs link errtyustli
2019-08-271、[bsp] [imxrt] rename docs imxrt -> i.MX RTtyustli
2、[bsp] [stm32] fix drv_can assert bug
2019-08-25fix bug when use HWTIMER_MODE_PERIODjiezhi320
2019-08-11change Libraries->librariesSummerGift
2019-07-19修正了dist命令对imxrt系列bsp包的支持，修改前的dist命令生 ↵yaomo718
成的工程缺少了Libraries。
2019-07-06Merge pull request #2786 from xfwangqiang/masterBernard Xiong
[BSP][NXP]MIMXRT1064-EVK
2019-07-051. 删除了多余的文件wangqiang
2. 修改README.md中错误的描述
2019-07-051. 修改了MIMXRT1064EVK-TOP.jpg的位置wangqiang
2. 去掉了一些不用的文件 3. 修复了board下SConscript脚本中不合理的地方
2019-07-05去掉了多余的宏定义wangqiang
2019-07-05Board.c增加了DMA初始化相关设置wangqiang
2019-07-05去掉DSP_Lib，暂时不用wangqiang
2019-06-28[bsp/imxrt]add can drivermisonyo
2019-06-23修改了BSP包中不合理的地方和不符合RTThread规范的地方wangqiang
2019-06-17删除了一些不用的文件wangqiang
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-26 08:06:42 +0000