| Age | Commit message (Collapse) | Author |
|---|
|
Requirement: The BSP for the k230 platform in the RT-Thread repository
does not yet have an RTC driver.
Solution: Provide RTC drivers for the k230 platform in the RT-Thread
repository, implementing timekeeping and alarm functionalities,
with interrupt support for the alarm feature.
Signed-off-by: Ze-Hou <[email protected]>
|
|
Added pdma support for uart driver and a test file test_uart.c.
The test uses pdma to improve uart send speed,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
Added a temperature sensor driver and a test file test_ts.c.
The test uses temperature sensor to measure the chip temperature,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
Originally, the interrupt definitions of various peripherals
were distributed in various peripheral drivers, resulting
in duplicate definitions. Now they are defined in one place.
Signed-off-by: Chen Wang <[email protected]>
|
|
This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC,
providing essential DMA capabilities for peripheral data transfers.
Key features implemented:
1. PDMA channel request/release management
2. Channel start/stop control
3. Interrupt callback registration
4. Data transfer between device ports and DDR memory
The driver includes:
- Core driver implementation (drv_pdma.c/h)
- Build system support (SConscript)
- Basic test cases (test_pdma.c)
Tested with:
- PDMA channel request/release
- DDR to UART TX FIFO transfers
- UART RX FIFO to DDR transfers
Signed-off-by: eatvector <[email protected]>
|
|
Added a PWM driver and a test file test_pwm.c.
The test uses PWM to control the LED brightness,
to check if the driver works correctly.
Signed-off-by: XU HU <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
K230 supports 3 GPIO groups:
group0: GPIO0 ~ GPIO31, support i/o and irq
group1: GPIO32 ~ GPIO63, support i/o and irq
group2: GPIO64 ~ GPIO71, only support i/o.
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
K230 support 6 general hardware timers and 3 stc timers.
This patch only implement drivers for general hw timers.
Signed-off-by: Chen Wang <[email protected]>
|
|
K230 has two watchdog timers.
Add unit tests based on utest framework.
Watchdog and test are both configuable, disabled by default.
Signed-off-by: Chen Wang <[email protected]>
|
|
Support sdio work for 01Studio board.
01Studio connect TF socket with sdio0, which is
different from standard canmv v1.0/v1.1 board
(which uses sdio1).
Updated configuration menu,
- SDIO devices are now a choice of two.
- Root file system types are also a choice of multiple.
Currently only cromfs and elmFAT are supported.
- Modified the default mount partition of the root file
system to sd0p1
Deleted the configuration BSP_SD_SDIO_DEV, and now
directly set mmcsd_change according to the selection of
the SDIO device.
Eliminated the warning of the drv_sdhci.c and
egularized the code format. The logic of this file
has not been essentially modified.
Sync and update the .config/rtconfig.h to the latest.
Signed-off-by: Chen Wang <[email protected]>
|
|
SystemCtrl includes:
- boot
- clock
- power
- reset
These drivers are built-in by default.
Signed-off-by: Wang Chen <[email protected]>
|
|
This hardlock is required by some other drivers, such
as sysctl power.
This driver can be enable/disabled by configuration.
Signed-off-by: Wang Chen <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Wang Chen <[email protected]>
|
|
|
