summaryrefslogtreecommitdiff
path: root/bsp/ls1cdev/drivers
AgeCommit message (Collapse)Author
2021-04-09[bsp]update GPL license to Apache-2.0, and format filesyangjie
2021-02-07localtim改为gmtimeMeco Man
2021-02-07解决底层驱动格林威治时间与当地时间胡乱使用的问题 ↵Meco Man
mktime函数改为timegm函数
2020-09-11[bsp][driver] 初始化 BSP 中的 rt_pin_opsyangjie
2019-12-17[bsp] Adapt ls{1b,1c}dev to new mips common codeJiaxun Yang
LS1C selfboot feature have been rewiritten, and we changed bare boot base to 0x80000000 to better utilize memory. Signed-off-by: Jiaxun Yang <[email protected]>
2019-08-21实现网络稳定传输以及ADB正常传输文件liufeilong
2019-08-21新增sd初始化以及spi03设备liufeilong
2019-08-21更正gpio框架中断方式宏定义与1c底层中断方式宏定义不一� ↵liufeilong
��问题
2019-05-08[bsp][ls1c] Add watchdog library function and driver .sundm75
2019-04-26[bsp][ls1c] add uart3 driver; fix net driver for lwip2.1.0; fix drv_t ouch ↵sundm75
driver; fix display driver; fix can driver.
2018-12-24[BSP][all ls1c]change license to Apache-2.0sundm75
[BSP][ls1c] add rtc library [BSP][ls1c] add pwm ,touch , rtc driver
2018-08-26Merge pull request #1738 from zhuangwei123/masterBernard Xiong
[bsp/ls1cdev]修复以太网驱动发送字节丢失问题
2018-08-26[bsp/ls1cdev]astyle格式化zhuangwei123
2018-08-26[bsp/ls1cdev]修复以太网驱动发送字节丢失问题zhuangwei123
2018-06-26[components][drivers][pin module]:typo fix for pin_detach_irqluo jiao
2018-06-10[bsp/ls1cdev]drv_spi.c astyle格式化代码zhuangwei123
2018-06-09[bsp/ls1cdev]SPI0添加CS0支持，移除drv_spi.c中的msd_init。SPI00可� ↵zhuangwei123
��于注册NORFLASH驱动
2018-05-12[bsp/ls1cdev]添加自引导特性，添加配置选项zhuangwei123
1、添加自引导特性，添加配置选项 2、修复cpuport.c的bug 3、修复ls1c_pin.c不能默认复用的bug
2018-05-11[bsp/ls1cdev]drv_gpio add interrupt opszhuangwei123
2018-05-11[bsp/ls1cdev]zhuangwei123
1、astyle格式化drv_uart代码 2、修改drv_uart.h头文件声明
2018-05-10[bsp/ls1cdev]zhuangwei123
1、uart驱动重写，采用uart驱动框架 2、添加并修改勤为本ls1c_uart 3、开启main为用户程序入口，删除application.c和startup.c,并对初始化部分做相应调整更新。 4、开启dhcp
2018-03-18[bsp][ls1c] delete msd driver, use SD/TF card driver with spi in componentssundm75
2018-03-18[bsp][ls1c] modify file formatsundm75
2018-03-17[bsp][ls1c] modify "RT_USING_UART" to "RT_USING_SERIAL"sundm75
2018-03-17[bsp][ls1c] add the condition for use touchsundm75
2018-03-17[bsp][ls1c] add ls1c_hw_i2c_initsundm75
2018-03-17[bsp][ls1c] add ls1c_hw_spi_initsundm75
2018-03-17[bsp][ls1c] add rtgui_lcd_initsundm75
2018-03-17[bsp][ls1c]change RT_USING_UART to RT_USING_SERIAL;remove some device initsundm75
2018-02-09[BSP][ls1c]Fix drv_can.c: No such file or directory(ls1c_can.h)sundm75
2018-02-09[BSP][ls1c]Fix drv_can.c: No such file or directory(Drv_can.h)sundm75
2018-02-09[BSP][ls1c]Add some code in board init.sundm75
2018-02-09[BSP][ls1c]Add can driver and libsundm75
2018-01-15[bsp] Add SmartloongV3 display,touch,msd, hw_i2c driversundm75
2018-01-15删除上次提交sundm75
2018-01-15修改touchsundm75
2018-01-14[bsp] Add display,sd,touch,hw_i2c driversundm75
2017-11-24[BSP][ls1c]新增PIN接口勤为本
将龙芯1c库中的gpio接口重新封装为RTT统一标准的pin接口
2017-11-22龙芯1c平台的rtt统一标准的I2C接口勤为本
2017-11-08把龙芯1c的SPI接口改为RTT统一的SPI接口勤为本
2017-10-17清理编译告警和错误。编译告警和错误的原因是删除了头� ↵勤为本
��件“components.h”
2017-10-16[BSP] remove components.h file.bernard
2017-10-16[BSP] change the type of cmd.bernard
1. Change the type of cmd to 'int'; 2. Remove RT_LWIP_USING_RT_MEM macro;
2017-09-13在配置文件“rtconfig.h”中增加硬浮点FPU的配置项，勤为本
浮点经常会用到，所以默认使用硬浮点。
2017-08-25再次修改源文件开头的license，清理网卡代码中的#if 0和#if 1勤为本
2017-08-24清理龙芯1c片内网卡驱动的冗余代码，给没有license的源码� ↵勤为本
��件增加license
2017-08-23添加龙芯1C片内网卡的驱动（原创作者是chinesebear，https://g ↵勤为本
ithub.com/chinesebear/rtt-net）
2017-08-10增加龙芯1c硬浮点的支持（可以使用硬浮点了）勤为本
2017-07-18将“龙芯1c库”中的GPIO相关接口移植到RT-Thread勤为本
2015-10-15[BSP] remove display_controller.h/c from ls1cdev bspBernard Xiong
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-24 19:53:59 +0000