summaryrefslogtreecommitdiff
path: root/bsp/nuvoton/libraries
AgeCommit message (Collapse)Author
2024-11-27[sscanf] use rt_sscanf to replace sscanfMeco Man
2024-10-23[kernel] Specification interrupt nested level variable declaration type (#9568)Yuqiang Wang
2024-10-19feat: bsp: fit into the new thread contextShell
2024-09-29[bsp][nuvoton][rsoc] Fix compilation issues with bsp of nuvoton serieshydevcode
2024-09-13[drivers] Specifies the name of the drivers driver fileCXSforHPU
https://github.com/RT-Thread/rt-thread/pull/9420
2024-03-24[bsp] format drivers codeMeco Man
2024-03-24[bsp][drv_gpio] fix the error code return when pin number is illegalMeco Man
2024-03-23[pin] pin_read/write rt_uint8_t to rt_ssize_tkk
2023-10-11[fix][usb]return data type as rt_ssize_tZ8MAN8
rt_ssize_t can give negative error code, which follows the unix style correctly
2023-08-24Update NuMaker-M2354 BSP building.Wayne Lin
1. Remove rt_hw_cpu_reset implementation in libcpu. 2. Update configuration. 3. Add drv_log.h for building. 4. Fix warnings.
2023-07-28[debug] use LOG_D instead RT_DEBUG_LOGMeco Man
related: https://github.com/RT-Thread/rt-thread/pull/7799
2023-07-13[components][i2c] 优化 controt 接口格式，增加可用命令 (#7806)sp-cai
原来 rt_i2c_control 只能执行 RT_I2C_DEV_CTRL_CLK 单一命令，通过此修改可以支持更多可用命令
2023-06-18[sensor-v2]将当前sensor框架revert回v1版本并独立为v2 (#7698)Man, Jianting (Meco)
2023-04-04[HUST CSE IoTS&P Lab] [fix] check rt_mutex_create return value (#7169)Sparks-Pion
2023-03-31Update fix warnings and builds.Wayne Lin
2023-03-24[components/drivers][touch]删除多余的touch.h (#7090)yangjie11
* [components/drivers][touch]删除多余的touch.h * 将touc.h替换为rtdevice.h
2023-03-22[errno code][-RT_EBUSY] fix that use RT_EBUSY without -Meco Man
2023-03-20[errno code][-RT_ERROR] fix that use RT_ERROR without -Meco Man
2023-03-19format sconscript Kconfig filesMeco Man
2023-03-16[errno code][-RT_EINVAL] fix that use RT_EINVAL without -Meco Man
2023-03-16[error code][-RT_EIO] fix that use RT_EIO without -Meco Man
2023-03-06Remove redundant 'extern' in function declarationcyyang
2023-02-07rt_device_write/read return data type as rt_ssize_tMeco Man
rt_ssize_t can give negative error code, which follows the unix style correctly
2023-01-11Fix building issue of Nuvoton porting. (#6833)Wayne
* Fix building issue of Nuvoton porting. 1. Change thread priority of lwip-tcpip and erx. 2. Remove '')' garbage symbols. 3. mm driver issues. Co-authored-by: Wayne Lin <[email protected]>
2023-01-08format Kconfig and sconscriptMeco Man
2022-12-29[bsp][nuvoton] modify RT_WEAK as rt_weakMeco Man
2022-12-29Sync upstream (#6793)Wayne
Co-authored-by: Wayne Lin <[email protected]>
2022-12-11[rtdef] use lower-case to define attributes (#6728)Man, Jianting (Meco)
* [rtdef] rename RT_WEAK attribute as rt_weak * [rtdef] rename RT_USED attribute as rt_used * [rtdef] rename RT_SECTION attribute as rt_section * [rtdef] rename ALIGN attribute as rt_align * [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-11-21[CAN]update struct can_filter_item and rt_can_msg (#6556)wdfk-prog
* 修改ry命令，已便于自定义保存路径 * modified: components/utilities/ymodem/ry_sy.c * 修复从被动错误恢复后发送返回异常 * 修复在自动重传模式下,ACK异常阻塞线程 - 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断 - 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。 * 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数 * formatting格式化代码 * update struct can_filter_item and rt_can_msg 1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index, 以便准确区分.采用宏定义兼容以前变量名. 2. 添加接收标识rxfifo,已指明是哪个RXFIFO. * 更正42M下的波特率 * 修复接收获取索引号错误 * 添加接收标识 * 更新注释 * 取消CANFD限制 * update struct can_filter_item and rt_can_msg
2022-10-10[bsp/nuvoton] Remove local libcpu cortex-a driver (#6504)Wayne
2022-10-11Remove aarch64 CPU driver.Wayne Lin
2022-10-11Add NuMaker-HMI-MA35D1 and RTP porting.Wayne Lin
2022-09-20[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448)Wayne
Co-authored-by: Wayne Lin <[email protected]>
2022-09-12[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416)Wayne
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. * Format files. Co-authored-by: Wayne Lin <[email protected]>
2022-09-07[kernel][version] 采用新的版本宏定义Meco Man
版本控制规范：https://semver.org/ 目前的版本子号不是很规范，其中RT_VERSION甚至和VS那边造成了冲突 ```c /* RT-Thread version information */ #define RT_VERSION 4L /**< major version number */ #define RT_SUBVERSION 1L /**< minor version number */ #define RT_REVISION 1L /**< revise version number */ ``` 参考ESP32： ```c /** Major version number (X.x.x) */ #define ESP_ARDUINO_VERSION_MAJOR 2 /** Minor version number (x.X.x) */ #define ESP_ARDUINO_VERSION_MINOR 0 /** Patch version number (x.x.X) */ #define ESP_ARDUINO_VERSION_PATCH 3 ``` 建议改成： ```c /* Major version number (X.x.x) */ #define RT_VERSION_MAJOR 4 /* Minor version number (x.X.x) */ #define RT_VERSION_MINOR 2 /* Patch version number (x.x.X) */ #define RT_VERSION_PATCH 0 ```
2022-09-06fix: Fix accidentally close PDMA used by other devices when close the serial ↵Freey0
port
2022-08-13[DeviceDriver] Add CANFD support and correct typos (#5912)Fan Yang
* Add CANFD support and correct typos - Added CANFD required fields to can.h - Fixed typos in can.h and can.c - Corrected all the projects affected by the typo - Fixed wrong line-ending in some affected can driver files Signed-off-by: Fan YANG <[email protected]> * update Signed-off-by: Fan YANG <[email protected]> Co-authored-by: Meco Man <[email protected]>
2022-06-22[rtc] use gmtime_r to replace gmtime (#6012)Man, Jianting (Meco)
* [rtc] use gmtime_r to replace gmtime
2022-06-13[bsp/nuvoton] Upload missing files. (#6052)Wayne
* [bsp/nuvoton] Upload missing files. Co-authored-by: Wayne Lin <[email protected]>
2022-06-09[Scons][iar][iccarm] ↵Meco Man
IAR统一使用iccarm作为判断条件而不是是用IDE的名字来进行判断 因为不确定后续IAR是否会像Keil一样内含有不同的编译工具链 此外，将判断条件改为列表方式，这样更方便后续增加其他可能的IAR编译链
2022-06-09[Scons] ↵Meco Man
将GCC判断条件改为列表方式，方便后续增加新的编译工具链
2022-06-03[bsp/nuvoton] Update. (#6022)Wayne
1. Sync 4.1.1+. 2. Add SDIO drivers for M480/M2354 platforms. 3. Update LVGL porting. 4. Add N9H30 FMI NAND driver. Co-authored-by: Wayne Lin <[email protected]>
2022-05-28Fix bug when restarting and getting interrupts that are not processed. (#5997)Freey0
Reason: Interrupts were not cleaned up during initialization
2022-04-22[bsp/gd32] bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin ↵Forest-Rain
(#5729) * bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin * feature,add gd32_spi's alt_func_num member for different spi periph's gpio * feature,add spi3,spi4,and support multi spi devices * feature,add rt_hw_spi_device_attach api * tested on the gd32f450i-eval board
2022-04-20[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM (#5802)Man, Jianting (Meco)
* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
2022-03-29[nuvoton] Update drivers and project setting. (#5726)Wayne
2022-03-15[update] add fal component. (#5662)LiuKang
* [update] add fal component. * [update] format code. * [update] change PKG_USING_FAL to RT_USING_FAL * [update] format code. * [update] fal * [update] delete FAL_SW_VERSION
2022-03-12Nuvoton drivers updating and more LVGL supporting. (#5647)Wayne
2022-02-08[nuvoton] Update configuration files and fix issue. (#5588)Wayne
1. Add default rtconfig.h header. 2. Fix IP reset issue. Co-authored-by: Wayne Lin <[email protected]>
2022-01-26Update RT_USING_DFS options and sync new USB host API.Wayne Lin
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-23 23:02:04 +0000