| Age | Commit message (Collapse) | Author |
|---|
|
1.Add the necessary function declarations for SMP enablement and implement the corresponding
functionalities, including rt_hw_secondary_cpu_up, secondary_cpu_entry, rt_hw_local_irq_disable,
rt_hw_local_irq_enable, rt_hw_secondary_cpu_idle_exec, rt_hw_spin_lock_init, rt_hw_spin_lock,
rt_hw_spin_unlock, rt_hw_ipi_send, rt_hw_interrupt_set_priority, rt_hw_interrupt_get_priority,
rt_hw_ipi_init, rt_hw_ipi_handler_install, and rt_hw_ipi_handler.
2.In the two functions (rt_hw_context_switch_to and rt_hw_context_switch) in context_gcc.S,
add a call to rt_cpus_lock_status_restore to update the scheduler information.
3.If the MMU is enabled, use the .percpu section and record different hartids by configuring
special page tables; if the MMU is not enabled, record them directly in the satp register.
Additionally, add dynamic startup based on core configuration.The .percpu section is only used
when both ARCH_MM_MMU and RT_USING_SMP are enabled. However, there is a certain amount of space
waste since no macro guard is added for it in the link script currently.
4.The physical memory of QEMU started in CI is 128MB, so RT_HW_PAGE_END is modified from the
original +256MB to +128MB. Modify the SConscript file under the common64 directory to include
common/atomic_riscv.c in the compilation process.
Signed-off-by: Mengchen Teng <[email protected]>
|
|
RISCV_S_MODE configuration only affects the code in
libcpu/risc-v/virt64, and the only bsp using this
libcpu is qemu-virt64-riscv.
Considering s-mode is the default mode RT-Thread
running on virt64 machine, it seems unnecessary to
make RISCV_S_MODE a Kconfig option.
Solution: Remove RISCV_S_MODE from Kconfig and define
it as a macro in the code in libcpu/risc-v/virt64.
Plus, due to this macro is only related to virt64, rename
RISCV_S_MODE to RISCV_VIRT64_S_MODE.
Update the .config/rtconfig.h in this patch.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
There is problem in the Kconfig of qemu-virt64-riscv.
RT_USING_VIRTIO is already defined in components/drivers/virtio/Kconfig,
so it should not be defined again in the BSP kconfig.
The solution is to rename RT_USING_VIRTIO to BSP_USING_VIRTIO.
Also, refer to the configuration method for virtio device drivers in
bsp/qemu-virt64-aarch64/drivers/Kconfig to rewrite the configuration
of BSP_USING_VIRTIO_xxx.
Updated default .config/rtconfig.h at the same time.
Signed-off-by: Chen Wang <[email protected]>
|
|
Kconfig
|
|
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <[email protected]>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
* [rt-smart/mem] remove pv_offset
* [rt-smart] list kernel space command
* [rt-smart] restore ioremap region
* [revert] restore kernel space isolation
* [rt-smart/pv_off] code format
* [rt-smart] add get_pvoff()
* [pvoffset] pvoff as constant for C codes
* [pvoff] pvoff as interfaces
|
|
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
|
|
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
|
|
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
|
|
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
|
|
|
|
