| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2024-08-12 | modify heap to zero | yekai | |
| as mysterywolf do in commit https://github.com/RT-Thread/rt-thread/commit/698569c3ca1d1413fe610f5421eaf549cb0016b7 | |||
| 2024-08-12 | update `STM32Cube MCU Package for STM32H7 Series` to 1.11.2 | yekai | |
| 2024-07-19 | 删除stm32/drv_pm.c不必要的头文件 | Rbb666 | |
| 2024-07-19 | [stm32][pm]lptimer is supported | wdfk-prog | |
| 2024-07-19 | [stm32][lptim]lptimer is register with hwtimer, only supports pm calls,the ↵ | wdfk-prog | |
| timer function is not supported | |||
| 2024-07-12 | [STM32][SPI]移除内部编写的延时函数使用统一延时接口 | wdfk-prog | |
| 2024-07-04 | [bsp][stm32]Increase the serial_v1 tx timeout. | Rbb666 | |
| 2024-07-02 | [bsp][stm32]fix stm32h7 spi transmit fail probelm. | Rbb666 | |
| 2024-06-27 | [bsp][stm32][uart V1]优化驱动实现 | wdfk-prog | |
| * 增加putc超时处理机制,防止死循环 * 优化TX中断初始化与卸载 * 添加TX中断方式实现 | |||
| 2024-06-26 | [bsp][stm32]Optimize ADCs and fix some bugs | yiyi | |
| 2024-06-25 | [chip flash] add drv_flash_l1.c for stm32l1xxx (#9077) | Chasel | |
| * [chip flash] add drv_flash_l1.c for stm32l1xxx * [fix] Modified the SConscript file to support building for STM32L1xxx. | |||
| 2024-06-20 | bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句 | latercomer | |
| 2024-05-06 | [stm32l4] select PKG_USING_STM32L4_HAL_DRIVER | Meco Man | |
| 2024-05-06 | [stm32l4] remove HAL | Meco Man | |
| 2024-05-06 | [stm32l4] remove STM32L4xx_HAL/CMSIS | Meco Man | |
| 2024-05-05 | [stm32] 调整CMSIS-Core软件包宏 | Meco Man | |
| 2024-05-04 | [stm32] i2c hard driver fixup：增加硬件I2C传输超时等待时间 | SCZeiDan | |
| 问题： 在使用硬件 I2C 驱动进行音频模块 WM8978 配置时，发现连续 rt_i2c_transfer 进行 I2C 传输时发现，连续多次调用 rt_i2c_transfer 会出现丢包现象；溯源发现是每次使用 rt_i2c_transfer 传输2字节，传输频率过高导致底层 HAL_I2C_Master_Seq_Transmit_DMA 报错 HAL_BUSY； 现象： rt_completion_wait超时等待完成之后，I2C仍处于HAL_I2C_STATE_BUSY_TX状态，且后续第二次运行至HAL_I2C_Master_Seq_Transmit_DMA时会直接返回HAL_BUSY，从而直接 goto out; 退出而不会再次进行超时等待； * drv_hard_i2c.c: 修复325行缺失'}'语法错误;更改HAL_I2C_xx_Transimt_xx调用中目标设备地址值;i2c_hard_config.h: 添加STM32F系列芯片xx_DMA_CONFIG宏定义; * 回溯I2C设备地址传参处(msg->addr<<1)修改； * fixup: 增加硬件I2C传输延时，解决连续传输导致HAL_BUSY状态； | |||
| 2024-04-29 | [i2c] adjust the timing for I2C initialization | LZerro | |
| 2024-04-29 | [spi] soft_spi_pin_init loop variable is initialized to 0 | LZerro | |
| The loop variable in the function 'drv_soft_spi:xx_pin_init()' is initialized to 0. | |||
| 2024-04-24 | [bsp][stm32] fix bugs of i2c hardware drivers | SCZeiDan | |
| 在STM32F429IGTx设备上使用硬件i2c驱动程序师遇到以下几个问题： 语法错误：drv_hard_i2c.c 行67、68中i2c_handle未正常替换过来，估计是上个版本对变量重命名后因为宏定义忽略了此处修改； 语法错误：drv_hard_i2c.c 行326中缺少一个"}"导致编译出错； 初始化i2c设备过程中对双地址选项进行设置时（i2c_handle->Init.OwnAddress2Masks = I2C_OA2_NOMASK），STM32F4系列SOC没有这个配置定义，于是我直接将双地址模式关闭了（i2c_handle->Init.DualAddressMode = I2C_DUALADDRESS_DISABLE）； 初始化i2c设备（DMA方式）过程中发现i2c_hard_config.h文件中未定义DMA通道配置； 主要补丁如下： 修复硬件i2c驱动代码中语法错误（drv_hard_i2c.c行67、68、326）； 关闭默认i2c双地址模式（drv_hard_i2c.c行75：I2C_DUALADDRESS_DISABLE）； 添加硬件i2c驱动配置文件DMA相关配置项，增加对SOC_SERIES_STM32F2、SOC_SERIES_STM32F4、SOC_SERIES_STM32F7系列芯片配置DMA_CHANNEL的适配 | |||
| 2024-04-22 | [STM32][SPI-DMA]特定条件下接收错误 | wdfk-prog | |
| 2024-04-12 | bsp/stm32: remove duplicate if condition | wirano | |
| 2024-04-11 | [SBP] Stm32F407-rt-spark adapts to RTduino | LZerro | |
| 2024-04-10 | [fix] fixup spaces and add in ci. | StackYuan | |
| 2024-04-10 | [BSP] add bsp for st's new platform stm32h7s7-st-disco. | StackYuan | |
| [drv] STM32H7RSxx_HAL bsp fixed and update. [add] bsp stm32h7s7-dk README.md | |||
| 2024-04-09 | [driver][soft-spi] spi device driver framework adds pin init function function | Yuqiang Wang | |
| 为什么提交这份PR (why to submit this PR) ps：在设备初始化阶段不应该存在对硬件的操作 你的解决方案是什么 (what is your solution) ps：添加一个pin_init函数，在spi设备使用时调用该函数来完成硬件引脚的状态初始化，而不是在设备初始化阶段对硬件进行操作，已经在瑞萨HMI上通过验证 | |||
| 2024-04-01 | [bsp][stm32] fix hardware i2c driver bug | Dyyt587 | |
| 2024-03-31 | [bsp][stm32][spi] 优化H7 DMA数据非字节对齐的处理流程 | wdfk-prog | |
| 2024-03-26 | [bsp][stm32] drv_rtc.c中包含drv_common.h 避免找不到 ↵ | Shicheng Chu | |
| error_handle实现 (#8676) | |||
| 2024-03-24 | [bsp][drv_gpio] fix the error code return when pin number is illegal | Meco Man | |
| 2024-03-23 | [pin] pin_read/write rt_uint8_t to rt_ssize_t | kk | |
| 2024-03-15 | [bsp][stm32] eth driver support phy YT8512C | 刘伟 | |
| 2024-03-08 | [bsp][stm32] format code of i2c hardware drivers | Meco Man | |
| 2024-03-07 | [bsp][stm32] add hardware i2c driver | Dyyt587 | |
| 2024-03-08 | [stm32][tim-config] fix F4 TIM6's IRQ source in STM32F412 | Meco Man | |
| 2024-01-27 | [bsp][stm32]完善stm32g0系列部分外设中断处理 (#8509) | yangpengya | |
| 2024-01-20 | [bsp][stm32]: Add ADC and PWM support for H5 (#8495) | Shicheng Chu | |
| 2024-01-18 | [bsp][renesas] RTduino configuration update | kurisaw | |
| sync update some optimize [bsp][driver] Updates the naming convention of the i2c configuration item | |||
| 2024-01-11 | [bsp][stm32]fix stm32f2 usart driver | yangpeng | |
| 2024-01-10 | [bsp][stm32]fix stm32f469 sdram not enable problem. | Rbb666 | |
| 2024-01-08 | [stm32] fix missing headfer files | Meco Man | |
| 2024-01-07 | [stm32] fxi gpio header files included | Meco Man | |
| 2023-12-28 | [stm32][rt-spark] support nano version | Meco Man | |
| 2023-12-26 | [ci][stm32f407] add attach config CI check | Meco Man | |
| 2023-12-26 | [bsp][stm32]eth driver support phy YT8512C | yangpengya | |
| 2023-12-25 | [stm32][ci] add RTduino CI checking | Meco Man | |
| 2023-12-24 | [stm32][drv_tim.c] fix errors when TIMx doesn't exist | Meco Man | |
| 2023-12-18 | add tim8 | Supper Thomas | |
| 2023-12-18 | [bsp][stm32] add board identification macros | Meco Man | |
| 2023-12-17 | [BSP/STM32] add support of RTC in g491 (#8377) | Supper Thomas | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |