summaryrefslogtreecommitdiff
path: root/bsp/stm32/libraries
AgeCommit message (Collapse)Author
2025-03-19log: automatic update and deployment before version releasev5.2.0kurisaw
2025-03-17[bsp][stm32][artpi]:add artpi eth ciCYFS
2025-03-17[bsp][stm32][artpi]:fix artpi ethCYFS
2025-03-17[bsp/stm32]fix compile warning (#10108)dongly
* [bsp/stm32]fix compile warning
2025-03-10[bsp][stm32][uart]:fix stm32 uart timout (#10022)CYFS
fix:stm32 uart timout
2025-03-10fix:[stm32][lcd]Error in control call of lcd test function (#10040)wdfk-prog
* Optimize the lcd_test function to call it in thread to prevent the CLI environment from being unavailable after execution.
2025-03-07fix: 修复星火一号看门狗驱动使能失败问题Li-Dongze
fix: 修复星火一号看门狗驱动使能失败问题
2025-02-09[drivers/spi]统一软件SPI配置Rbb666
2025-01-04Fix: [CAN][STM32] GCC compile errorsGibby
error: a label can only be part of a statement and a declaration is not a statement 459 | rt_uint32_t errtype;
2024-12-21[opt][SDIO_MAX_FREQ redundant define del]Gaogao
2024-12-13[bsp][stm32] hardware i2c driver add support for STM32F1 serieszzk597
2024-11-13fix:[CAN][STM32]open时立刻启动can_start,还未完成其他配置,可能 ↵wdfk-prog
导致异常
2024-10-19[bsp][stm32][rsoc]串口超时判断逻辑有问题CYFS
[bsp][stm32]fix uart bug
2024-10-14[bsp][stm32] fix variable initMeco Man
fix https://github.com/RT-Thread/rt-thread/pull/9525
2024-10-12move `GPIO_InitStruct` variable inside to `PIN_IRQ_ENABLE`. thanks to ↵Diamond Rivero
@mysterywolf
2024-10-12call `HAL_GPIO_Init()` by defaultDiamond Rivero
2024-09-13[drivers] Specifies the name of the drivers driver fileCXSforHPU
https://github.com/RT-Thread/rt-thread/pull/9420
2024-08-23[device] add dev_ prefix for file namesCXSforHPU
2024-08-12modify startup to call entry after startyekai
2024-08-12modify heap to zeroyekai
as mysterywolf do in commit https://github.com/RT-Thread/rt-thread/commit/698569c3ca1d1413fe610f5421eaf549cb0016b7
2024-08-12update `STM32Cube MCU Package for STM32H7 Series` to 1.11.2yekai
2024-07-19删除stm32/drv_pm.c不必要的头文件Rbb666
2024-07-19[stm32][pm]lptimer is supportedwdfk-prog
2024-07-19[stm32][lptim]lptimer is register with hwtimer, only supports pm calls,the ↵wdfk-prog
timer function is not supported
2024-07-12[STM32][SPI]移除内部编写的延时函数使用统一延时接口wdfk-prog
2024-07-04[bsp][stm32]Increase the serial_v1 tx timeout.Rbb666
2024-07-02[bsp][stm32]fix stm32h7 spi transmit fail probelm.Rbb666
2024-06-27[bsp][stm32][uart V1]优化驱动实现wdfk-prog
* 增加putc超时处理机制,防止死循环 * 优化TX中断初始化与卸载 * 添加TX中断方式实现
2024-06-26[bsp][stm32]Optimize ADCs and fix some bugsyiyi
2024-06-25[chip flash] add drv_flash_l1.c for stm32l1xxx (#9077)Chasel
* [chip flash] add drv_flash_l1.c for stm32l1xxx * [fix] Modified the SConscript file to support building for STM32L1xxx.
2024-06-20bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句latercomer
2024-05-06[stm32l4] select PKG_USING_STM32L4_HAL_DRIVERMeco Man
2024-05-06[stm32l4] remove HALMeco Man
2024-05-06[stm32l4] remove STM32L4xx_HAL/CMSISMeco Man
2024-05-05[stm32] 调整CMSIS-Core软件包宏Meco Man
2024-05-04[stm32] i2c hard driver fixup：增加硬件I2C传输超时等待时间SCZeiDan
问题： 在使用硬件 I2C 驱动进行音频模块 WM8978 配置时，发现连续 rt_i2c_transfer 进行 I2C 传输时发现，连续多次调用 rt_i2c_transfer 会出现丢包现象；溯源发现是每次使用 rt_i2c_transfer 传输2字节，传输频率过高导致底层 HAL_I2C_Master_Seq_Transmit_DMA 报错 HAL_BUSY； 现象： rt_completion_wait超时等待完成之后，I2C仍处于HAL_I2C_STATE_BUSY_TX状态，且后续第二次运行至HAL_I2C_Master_Seq_Transmit_DMA时会直接返回HAL_BUSY，从而直接 goto out; 退出而不会再次进行超时等待； * drv_hard_i2c.c: 修复325行缺失'}'语法错误;更改HAL_I2C_xx_Transimt_xx调用中目标设备地址值;i2c_hard_config.h: 添加STM32F系列芯片xx_DMA_CONFIG宏定义; * 回溯I2C设备地址传参处(msg->addr<<1)修改； * fixup: 增加硬件I2C传输延时，解决连续传输导致HAL_BUSY状态；
2024-04-29[i2c] adjust the timing for I2C initializationLZerro
2024-04-29[spi] soft_spi_pin_init loop variable is initialized to 0LZerro
The loop variable in the function 'drv_soft_spi:xx_pin_init()' is initialized to 0.
2024-04-24[bsp][stm32] fix bugs of i2c hardware driversSCZeiDan
在STM32F429IGTx设备上使用硬件i2c驱动程序师遇到以下几个问题： 语法错误：drv_hard_i2c.c 行67、68中i2c_handle未正常替换过来，估计是上个版本对变量重命名后因为宏定义忽略了此处修改； 语法错误：drv_hard_i2c.c 行326中缺少一个"}"导致编译出错； 初始化i2c设备过程中对双地址选项进行设置时（i2c_handle->Init.OwnAddress2Masks = I2C_OA2_NOMASK），STM32F4系列SOC没有这个配置定义，于是我直接将双地址模式关闭了（i2c_handle->Init.DualAddressMode = I2C_DUALADDRESS_DISABLE）； 初始化i2c设备（DMA方式）过程中发现i2c_hard_config.h文件中未定义DMA通道配置； 主要补丁如下： 修复硬件i2c驱动代码中语法错误（drv_hard_i2c.c行67、68、326）； 关闭默认i2c双地址模式（drv_hard_i2c.c行75：I2C_DUALADDRESS_DISABLE）； 添加硬件i2c驱动配置文件DMA相关配置项，增加对SOC_SERIES_STM32F2、SOC_SERIES_STM32F4、SOC_SERIES_STM32F7系列芯片配置DMA_CHANNEL的适配
2024-04-22[STM32][SPI-DMA]特定条件下接收错误wdfk-prog
2024-04-12bsp/stm32: remove duplicate if conditionwirano
2024-04-11[SBP] Stm32F407-rt-spark adapts to RTduinoLZerro
2024-04-10[fix] fixup spaces and add in ci.StackYuan
2024-04-10[BSP] add bsp for st's new platform stm32h7s7-st-disco.StackYuan
[drv] STM32H7RSxx_HAL bsp fixed and update. [add] bsp stm32h7s7-dk README.md
2024-04-09[driver][soft-spi] spi device driver framework adds pin init function functionYuqiang Wang
为什么提交这份PR (why to submit this PR) ps：在设备初始化阶段不应该存在对硬件的操作 你的解决方案是什么 (what is your solution) ps：添加一个pin_init函数，在spi设备使用时调用该函数来完成硬件引脚的状态初始化，而不是在设备初始化阶段对硬件进行操作，已经在瑞萨HMI上通过验证
2024-04-01[bsp][stm32] fix hardware i2c driver bugDyyt587
2024-03-31[bsp][stm32][spi] 优化H7 DMA数据非字节对齐的处理流程wdfk-prog
2024-03-26[bsp][stm32] drv_rtc.c中包含drv_common.h 避免找不到 ↵Shicheng Chu
error_handle实现 (#8676)
2024-03-24[bsp][drv_gpio] fix the error code return when pin number is illegalMeco Man
2024-03-23[pin] pin_read/write rt_uint8_t to rt_ssize_tkk
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-26 17:03:03 +0000