| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2019-06-25 | [bsp][stm32] drv_wdt.c | 完善 stm32 看门狗驱动 | tangweikang | |
| 2019-06-24 | [bsp][stm32][libraries][HAL_Drivers] update drv_can.c | 杨连钊 | |
| adapt to new HAL_lib | |||
| 2019-06-21 | Merge pull request #2800 from misonyo/rttdev | Bernard Xiong | |
| [bsp/stm32]add stm32f2xx template | |||
| 2019-06-19 | Merge pull request #2791 from balanceTWK/gpio_pr | Bernard Xiong | |
| [bsp][stm32] fix drv_gpio.c 直接将特殊引脚删除,不再作为 pin 设备 | |||
| 2019-06-19 | [update][bsp][stm32] drv_gpio.c | tangweikang | |
| 2019-06-18 | [bsp/stm32]add stm32f2xx template | misonyo | |
| 2019-06-18 | [update] drv_gpio.c | tangweikang | |
| 2019-06-18 | [add] stm32 SDIO_MAX_FREQ option.If not defined, the default minimum value ↵ | tangweikang | |
| is 1000000 . | |||
| 2019-06-17 | 如果开启了RT_CAN_USING_HDR,则提示该驱动不支持硬件过滤器 ↵ | zhangjun1996 | |
| ,请取消RT_CAN_USING_HDR。 | |||
| 2019-06-15 | 重新配置CAN之前,关闭CAN,配置完再打开。 | zhangjun1996 | |
| 2019-06-15 | 头文件缩进 | zhangjun1996 | |
| 2019-06-15 | 1,修复由于stm32系列的hal库升级导致stm32f1和stm32f4平台的ca ↵ | zhangjun1996 | |
| n驱动编译错误 2,关闭components/drivers/Kconfig中默认打开的can硬件滤波器选项 3,为了让can波特率设置匹配stm32f429的时钟,给stm32f429增加波特率表 4,以上修复在stm32f103-fire-arbitrary,stm32f407-atk-explorer,stm32f429-atk-apollo三个bsp中测试通过 | |||
| 2019-06-13 | Merge pull request #2760 from HubertXie/master | Bernard Xiong | |
| [bsp][stm32]修复RTC选用LSI时不工作问题 | |||
| 2019-06-12 | Merge pull request #2770 from willianchanlovegithub/469 | Bernard Xiong | |
| [bsp][stm32][f469-disco]Add SD card hot plug detection | |||
| 2019-06-12 | [bsp][stm32][f469-disco]Add SD card hot plug detection | Willian Chan | |
| Signed-off-by: Willian Chan <[email protected]> | |||
| 2019-06-12 | Merge pull request #2762 from SummerGGift/phy_check | Bernard Xiong | |
| [stm32][driver] Fix the problems of PHY status examination mentioned in issue #2756 | |||
| 2019-06-10 | 【修改】HAL_ETH_RxCpltCallback 提示等级由 error 修改为 ↵ | SummerGift | |
| info,因为这是一个非致命的问题 | |||
| 2019-06-10 | 【优化】PHY 状态检测流程 | SummerGift | |
| 2019-06-10 | 【修改】changelog for PHY state detection process | SummerGift | |
| 2019-06-10 | 【完善】PHY 状态检测驱动 | SummerGift | |
| 2019-06-10 | 【修复】恢复更新 F1 HAL 库错误删除的代码 | 我夏了夏天 | |
| 2019-06-10 | 【更新】f1 系列 HAL 库到 1.1.3 版本,主要更新了 can 相关驱动 | SummerGift | |
| 2019-06-10 | 【更新】HAL CMSIS 到 4.3.0 版本 | SummerGift | |
| 2019-06-10 | 【修复】PHY 状态查询过程中的 bug | SummerGift | |
| 2019-06-09 | Update drv_rtc.c | HubretXie | |
| rtc选用lsi时不工作 | |||
| 2019-06-05 | [bsp][stm32h743-atk-apollo]add rtc | whj4674672 | |
| 2019-05-29 | [bsp][stm32] Add usb configuration for L4 series | guozhanxin | |
| 2019-05-28 | Update Kconfig | HubretXie | |
| 2019-05-27 | [BSP][STM32] 增加RT_USING_CPU_FFS配置选项 | HubretXie | |
| kconfig中增加RT_USING_CPU_FFS配置选项,并且默认开启 | |||
| 2019-05-26 | Merge pull request #2717 from willianchanlovegithub/469 | Bernard Xiong | |
| [bsp][stm32][f469-disco]Separation of MIPI-LTCDC and LCD Configuration | |||
| 2019-05-25 | Merge pull request #2718 from whj4674672/master | Bernard Xiong | |
| [stm32][stm32h7]修复H7 spi依赖文件路径错误的BUG | |||
| 2019-05-24 | 【修复】由于添加串口 DMA 发送对串口 DMA ↵ | SummerGift | |
| 接收配置造成的影响 | |||
| 2019-05-24 | Fix comment random code | Willian Chan | |
| Signed-off-by: Willian Chan <[email protected]> | |||
| 2019-05-24 | [stm32][stm32h7]修复H7 spi依赖文件路径错误的BUG | whj4674672 | |
| 2019-05-24 | 分离MIPI-LTDC和LCD配置 | Willian Chan | |
| Signed-off-by: Willian Chan <[email protected]> | |||
| 2019-05-23 | Merge pull request #2645 from zhouchuanfu/stm32_uart_tx_dma | Bernard Xiong | |
| [bsp][stm32] 增加uart的DMA发送功能 | |||
| 2019-05-22 | Update drv_usart.c | 周传福 | |
| 2019-05-22 | Update drv_usart.c | 周传福 | |
| 修复dma_config里面rcc的bug。 | |||
| 2019-05-21 | 修改systick初始化,由于STM32H7系列与STM32F系列时钟架构不� ↵ | lizhen9880 | |
| �导致 STM32H7系列与STM32F系列时钟架构不同 STM32F系列systick时钟源来自HCLK STM32H7系列systick时钟源来自SystemCoreClock 因此增加SOC_SERIES_STM32H7作为编译条件 | |||
| 2019-05-20 | Merge pull request #2704 from Guozhanxin/iot_board | Bernard Xiong | |
| [bsp][stm32]修复 w5500 和 drv_eth.c 依赖的问题 | |||
| 2019-05-20 | [bsp][stm32]修复 w5500 和 drv_eth.c 依赖的问题 | guozhanxin | |
| 2019-05-20 | Update drv_usart.c | 周传福 | |
| 2019-05-20 | Update drv_usart.c | 周传福 | |
| 2019-05-20 | Update drv_usart.c | 周传福 | |
| 2019-05-19 | Update drv_usart.c | 周传福 | |
| 2019-05-19 | Merge branch 'master' into stm32_uart_tx_dma | 周传福 | |
| 2019-05-18 | Merge pull request #2644 from zhouchuanfu/stm32_uart | Bernard Xiong | |
| [bsp][stm32] 增加uart的dma半中断接收方式。 | |||
| 2019-05-17 | Update drv_usart.c | 周传福 | |
| 添加部分空行 | |||
| 2019-05-16 | Update drv_usart.c | 周传福 | |
| 添加函数说明 | |||
| 2019-05-16 | Merge branch 'master' into stm32_uart_tx_dma | 周传福 | |
