| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2023-02-21 | add init ops (stm32 serialX) | thewon86 | |
| 2023-02-20 | implement serialX UART device framework | thewon86 | |
| 2023-02-11 | [spi]添加rt_spi_bus_attach_device_cspin 函数 (#6916) | liYangYang | |
| 这个函数实现了原先的挂载功能，并且调用pin框架，初始化cs引脚，是一个功能相对完善的挂载函数。用户也能更简单的使用。 该函数取代rt_spi_bus_attach_device，后续rt_spi_bus_attach_device会被逐渐淘汰掉。新的BSP以及软件包应当使用rt_spi_bus_attach_device_cspin新函数。 STM32L475潘多拉测试通过。 | |||
| 2023-02-07 | rt_device_write/read return data type as rt_ssize_t | Meco Man | |
| rt_ssize_t can give negative error code, which follows the unix style correctly | |||
| 2023-01-22 | [stm32] sconscript typo | Meco Man | |
| 2023-01-18 | [stm32][qspi] qspi attach 函数问题解决方案 (#6867) | liYangYang | |
| * [qspi] qspi attach 函数解决方案 * pin * 更改函数名字 | |||
| 2023-01-18 | [stm32][softspi]soft spi attach函数问题解决方案 (#6868) | liYangYang | |
| * [softspi]soft spi attach函数问题解决方案 * 更改函数名 | |||
| 2023-01-18 | [stm32][spi] spi attach函数问题解决方案 (#6864) | liYangYang | |
| attach #6819 | |||
| 2023-01-17 | [bsp/stm32wle5-yizhilian-lm402]修复scons --dist缺失大量文件 | 会飞的猪 | |
| 2023-01-17 | [bsp/stm32wle5-yizhilian-lm401]修复scons --dist缺失大量文件 | 会飞的猪 | |
| 2023-01-16 | [BSP][stm32] fix the compile error | Zxy | |
| 2023-01-12 | modify RT_ALIGN_SIZE as 8 by default | Meco Man | |
| 2023-01-13 | [RTduino][stm32f469-disco][readme] fix typo | Meco Man | |
| 2023-01-13 | [RTduino][stm32f411-nucleo] add English readme | Meco Man | |
| 2023-01-13 | [RTduino][stm32f410-nucleo] add English readme | Meco Man | |
| 2023-01-13 | [RTduino][readme] correct grammar | Meco Man | |
| 2023-01-12 | [env] add scons --strict | Meco Man | |
| 此commit意图在脚本中增加 scons --strict命令，使用该命令编译工程时，会自动将CFLAGS CXXFLAGS设置为 Werrors，即较为严格的编译模式，任何警告都会当做错误来处理。 该命令主要用于CI，在CI执行bsp编译时，可以使用 scons --strict命令。现在QEMU的rtconfig.py 为了CI检查，直接将CFLAGS加上了Werrors，导致正常编译过程中也把警告当做了错误，对日常使用该bsp造成了影响。 | |||
| 2023-01-10 | [RTduino][stm32f410-nucleo] ↵ | lpy | |
| 添加readme，在pins_arduino.c和pins_arduino.h添加了USER_KEY引脚编号 (#6838) * 添加readme * 更改pins_arduino.h引脚编号 Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2023-01-08 | format stm32 drivers | Meco Man | |
| 2023-01-08 | format link scripts | Meco Man | |
| 2023-01-08 | format Kconfig and sconscript | Meco Man | |
| 2023-01-08 | improve sensor framework (#6784) | Man, Jianting (Meco) | |
| * [stm32l475-pandora] rename sensor_port.c as drv_sensors.c * [sensor][cmd] add enter critical section protection * [sensor] add sensor reset command | |||
| 2023-01-07 | [STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 (#6819) | liYangYang | |
| * [spi]attach 片选引脚依赖pin框架 * 修改attach函数 | |||
| 2023-01-02 | [stm32][adc]更改配置通道与校准函数顺序 (#6758) | wdfk-prog | |
| * [stm32][adc]更改配置通道与校准函数顺序 * 添加16位与14位分辨率配置 * 添加内部参考电压与温度,电池电压通道配置 * [stm32][adc]修改返回参考电压函数 * 返回准确的参考电压值 * 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确 * 删除多余代码 * 规划代码格式 * 更新支持其余芯片 * 已测试F429 | |||
| 2023-01-01 | [rtduino]:add README for stm32f411-weact-blackpill pinout (#6807) | 螺丝松掉的人 | |
| * [rtduino]:add README for stm32f411-weact-blackpill pinout | |||
| 2023-01-01 | [rtduino]: fix README | 褚仕成 | |
| 2022-12-31 | [bsp][stm32f407-RoboMaster-C]Enable TIM5_CH1/2/3 | goldengrandpa | |
| 2022-12-30 | [rtduino] : fix arduino_pinout and README | 褚仕成 | |
| 2022-12-26 | use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE | Meco Man | |
| 2022-12-26 | [stm32][pandora] add ap3216c sensor support | Meco Man | |
| 2022-12-24 | [stm32][spic]修改SPI TX DMA中断优先级 | wdfk-prog | |
| * 原先中断优先级不生效 | |||
| 2022-12-22 | [STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时 | wdfk-prog | |
| * 未判断设置延时数是否会溢出 | |||
| 2022-12-21 | [sensor] draft new sensor-hal framework (#6746) | Man, Jianting (Meco) | |
| * [sensor] new sensor framework 针对老版本sensor框架的诸多不合理设计进行重构 之前的PR中已经重构了浮点数相关的问题 本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除 * [sensor] 增加can modbus总线类型 * [stm32l745] 完善sensor对接 * [sensor] fix the onchip ID print | |||
| 2022-12-21 | [stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765) | Zxy | |
| 并确认并列出已经在什么情况或板卡上进行了测试。 And confirm in which case or board has been tested. --> STM32F103ZET6 为什么提交这份PR (why to submit this PR) 使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。 你的解决方案是什么 (what is your solution) 修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。 在什么测试环境下测试通过 (what is the test environment) rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能 | |||
| 2022-12-21 | [arduino][stm32f427-robomaster-a] : 对接RTduino (#6767) | 螺丝松掉的人 | |
| * [arduino][stm32f427-robomaster-a] : 对接RTduino * Update README.md * Update pins_arduino.c Co-authored-by: Man, Jianting (Meco) <[email protected]> | |||
| 2022-12-20 | [bsp] [stm32F401] Enable PA11 for TIM1_CH4 (#6756) | Stanley Lwin | |
| 2022-12-20 | [arduino][stm32f407-robomaster-c] 对接RTduino (#6759) | 螺丝松掉的人 | |
| 2022-12-16 | [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 (#6745) | wdfk-prog | |
| * [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 * 规范代码格式 | |||
| 2022-12-15 | [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA� ↵ | wdfk-prog | |
| �动 (#6741) * [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动 * H7下SPI时钟不再为外设总线时钟频率 * H7下DMA驱动需要进行CacheLine对齐 | |||
| 2022-12-11 | [rtdef] use lower-case to define attributes (#6728) | Man, Jianting (Meco) | |
| * [rtdef] rename RT_WEAK attribute as rt_weak * [rtdef] rename RT_USED attribute as rt_used * [rtdef] rename RT_SECTION attribute as rt_section * [rtdef] rename ALIGN attribute as rt_align * [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support | |||
| 2022-12-09 | [bug] fix tim bug | liYony | |
| 2022-12-06 | [STM32][SPI]优化APBx时钟配置代码 (#6698) | liYangYang | |
| * [STM32][SPI]优化APBx时钟配置代码 | |||
| 2022-12-06 | 添加判断当前使用定时器是否可配置为主从定时器模式 | wdfk-prog | |
| 2022-12-06 | 修改串口V2的putc顺序 | 少年老王 | |
| 1.顺序修改回V1,保证每次都是当前数据发送完才跳出 | |||
| 2022-12-06 | some errors | liYony | |
| 2022-12-06 | tim_clock_get | liYony | |
| 2022-12-06 | tim clk config fix | liYony | |
| 2022-12-05 | [fix][stm32]修复输出高电平异常的问题 | wdfk-prog | |
| 2022-12-05 | [stm32l475-pandora] update readme | Meco Man | |
| 2022-12-04 | [RTduino][STM32]为stm32l431-BearPi开发板对接RTduino软件包 (#6688) | liYangYang | |
 |
index : rt-thread.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |