summaryrefslogtreecommitdiff
path: root/bsp
AgeCommit message (Collapse)Author
2022-07-04[bsp/esp32c3] add Kconfigsupperthomas
2022-07-04[BSP][STM32] RTC Alarm驱动适配张世争
2022-07-01[qemu] update qemu projectMeco Man
2022-07-01chore: improve qemu readme (#6131)Man, Jianting (Meco)
2022-06-30Docking lvgl for stm32f469-st-disco bsp using ft6336 touch chip (#6121)solar_li
* Add touch V2 version * Added touch driver ft6336 for stm32f469 bsp
2022-06-29Add lvgl adaptation of touch screen xpt2046 for BSP (#6114)solar_li
* lvgl adaptation to resistive touch screen xpt2046 * some bug * canonical code * canonical code * fix * Modify the calibration section * Modify the calibration section * fix
2022-06-29支持只运行在安全模式下 (#6115)Tangyuxin
* [cpu][cm33] Support running in secure mode * [bsp][lpc55sxx] Using the cortex cm33
2022-06-28[bsp/gd32]Optimize GD32 bsp architecture (#6108)BruceOu
* [bsp/gd32]Optimize GD32 bsp architecture
2022-06-27[docs] bsp/qemu_vexpress_a9 update README.md (#6109)陈迎春
* [docs] bsp/qemu_vexpress_a9 update README.md
2022-06-23[arduino][stm32l475] support wireless module pinoutMeco Man
2022-06-23Implement api docking of rt_pin_get. (#6102)solar_li
* Implement api docking of rt_pin_get.
2022-06-22[rtc] use gmtime_r to replace gmtime (#6012)Man, Jianting (Meco)
* [rtc] use gmtime_r to replace gmtime
2022-06-22update rt1170n menuconfig (#6085)xinyigao
* updata rt1170 menuconfig
2022-06-22delet old HC32F460 bsp and modify README.md (#6100)levizhxl
2022-06-21接收错误中断未触发的问题ueJone
/* Enable error interrupt */ NVIC_EnableIRQ(uart->config->rxerr_irq.irq_config.irq_num); 上述代码使能错误接收中断后需要使能串口的接收中断`USART_INT_RX`才可以正常触发中断
2022-06-21[bsp/qemu-virt64-aarch64] Fixup VirtIO queue align size (#6096)GUI
2022-06-21修复hc32f460的can总线在bus ↵梁生
off状态时死机问题，修复can滤波器设置失效问题 (#6083) * [bsp][hc32]fix can bus driver bug. 1. 更改硬件滤波器数量为8，和手册描述一致。 2. 修复_can_control()函数，RT_CAN_CMD_SET_FILTER指令，当应用层ID超出29bit时导致滤波器失效的问题。 3. 修改_can_control()函数，RT_CAN_CMD_SET_FILTER指令， 可同时支持标准帧和扩展帧。 4. 修复can总线故障关闭时，程序一直卡在中断中无法退出的问题。 5. 针对can收发器硬件STB引脚，增加宏定义CAN1_STB_FUNC_ENABLE，适配没有STB引脚的收发器。 This reverts commit 7fcd8e9afc68eecf5fecc4cb6f9acc4fe76c2796.
2022-06-18[bsp/qemu-virt64-aarch64] Add more VirtIO drivers (#6091)GUI
2022-06-17[arduino] use perf_counter to instead of hwtimer (#6089)Man, Jianting (Meco)
移除硬件定时器依赖 取消stm32f401 spi的支持 更换f401 arduino默认例程
2022-06-16修复sdio读写块的地址偏移问题 (#6082)woody
* 修复sdio读写块的地址偏移问题
2022-06-16[bsp][hc32]support MDK AC6 compiler (#6087)梁生
2022-06-16[stm32][soft spi] implement soft spi (#6078)solar_li
* [stm32][soft spi] implement soft spi
2022-06-16[simulator] improve init processMeco Man
2022-06-15添加HC32F460系列RTC外设驱动 (#6069)xiaoxiaolisunny
* 添加HC32F460系列RTC外设驱动
2022-06-15fix bugs of hc32 driver adc and can (#6077)cmbjxxiao
* fix bugs of hc32 driver adc and can
2022-06-14[bsp][stm32]：修复UART6 DMA分配有可能冲突的BUGbreederbai
用户自己可以添加DMA分配文件，所以这里的DMA分配有可能和用户自定义的冲突
2022-06-14[stm32][hwtimer] add H7 supportMeco Man
2022-06-14[bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with ↵100ask-Alen
other bsp and commit a bug for drv_adc,c (#6068) * [bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with other bsp and commit a bug for drv_adc,c (#6068)
2022-06-13[bsp/qemu-virt64-riscv]: dont use sbi in m-moderewine
2022-06-13[bsp/nuvoton] Upload missing files. (#6052)Wayne
* [bsp/nuvoton] Upload missing files. Co-authored-by: Wayne Lin <[email protected]>
2022-06-13[bsp/stm32l496_ali] add the on-chip flash (#6061)supperthomas
* [bsp/stm32l496_ali] add the on-chip flash * [bsp/stm32l496_ali]add Kconfig Co-authored-by: Meco Man <[email protected]>
2022-06-13添加HC32F460系列ADC外设驱动支持 (#6067)xiaoxiaolisunny
* 添加HC32F460系列ADC外设驱动支持
2022-06-13修改格式xiaoxiaolisunny
2022-06-13[bsp][hc32]添加HC32F460系列模拟I2C外设驱动支持xiaoxiaolisunny
2022-06-09[docs] add nrfx docschenyingchun0312
2022-06-09修复多串口的描述符被覆盖的问题 (#6051)ueJone
[bsp][HC32] 修复使用多串口的描述符被覆盖的问题
2022-06-09[bsp][stm32l496zg] add on-chip feature (#6056)supperthomas
* [bsp][stm32l496zg] add on-chip feature
2022-06-09[bsp][rockchip][rk2108]: add rk2108 base support. (#6040)Steven-LiuSF
* [bsp][rockchip][rk2108]: add rk2108 base support. Signed-off-by: Steven Liu <[email protected]>
2022-06-09修改USART2_RX_PINxiaoxiaolisunny
2022-06-09添加HC32F460系列CAN设备驱动支持xiaoxiaolisunny
2022-06-09[scons][iar] 将IAR的PLATFORM字段由iar调整为iccarmMeco Man
将路径更新为IAR最新版本的路径
2022-06-09[Scons][iar][iccarm] ↵Meco Man
IAR统一使用iccarm作为判断条件而不是是用IDE的名字来进行判断 因为不确定后续IAR是否会像Keil一样内含有不同的编译工具链 此外，将判断条件改为列表方式，这样更方便后续增加其他可能的IAR编译链
2022-06-09[Scons] ↵Meco Man
将GCC判断条件改为列表方式，方便后续增加新的编译工具链
2022-06-08添加USART1/2/3的管脚配置操作 (#6039)xiaoxiaolisunny
2022-06-08[bsp][100ask]: create two new bsp for 100ask stm32f103 boards and commit ↵100ask-Alen
them (#6045) * 重新pull后上传bsp和action * remove the file named main.c in cubemx prj and add enter at last in the file named user_key.c * remove personal project environment file project.uvguix.slhuan in rtt/bsp/stm32/stm32f103_100ask_mini * remove system_stmf1xx.c in bsp/stm32/stm32f103-100ask_pro/mini * modify stm32f1xx_it.c code to conform to the specification Co-authored-by: slhuan <[email protected]>
2022-06-08[bsp][stm32] fix stm32f767-st-nucleo console device nameluhuadong
2022-06-08[bsp][stm32h750-artpi] Modify the content of flash algorithms in README.mdYanlineng
2022-06-08[bsp][stm32h750-artpi] add bootloader.bin, add the description of the ↵Yanlineng
bootloader in README.md.(#5923)
2022-06-08[bsp][stm32] 增加uart7和uart8的DMA配置breederbai
2022-06-06[bsp][essemi] update es32f36xx libraries.liuhy
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-30 03:58:27 +0000