summaryrefslogtreecommitdiff
path: root/bsp
AgeCommit message (Collapse)Author
2025-12-27add i2c,timer,pwm supportDailingxiang1
revise the README.md
2025-12-26feat[nxp][can]：add mcxa346 can deviceCYFS
2025-12-26[sdio][dm] update for DM (#11078)GUI
* [sdio][dm] import Kconfig for DM Signed-off-by: GuEe-GUI <[email protected]> * [sdio] fixup IRQ and mmcsd threads' stack size default Signed-off-by: GuEe-GUI <[email protected]> * [sdio][dm] Support DM mode 1. Support features read by DM. 2. Support regulator API in drivers. 3. Support send tuning option CMD. 4. Replace `switch_uhs_voltage` by `signal_voltage_switch`. Signed-off-by: GuEe-GUI <[email protected]> * [dm][sdhci] Cleanup the SDHCI Signed-off-by: GuEe-GUI <[email protected]> * [sdio][dm] add new SDIO/SDHCI drivers 1. SDHCI support on PCI bus 2. Synopsys DesignWare MMC Family(MMIO/PCI) Signed-off-by: GuEe-GUI <[email protected]> --------- Signed-off-by: GuEe-GUI <[email protected]>
2025-12-26[bsp][k230]:add gnne driverChuan
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have a gnne driver. Solution: Provide gnne driver for the k230 platform in the RT-Thread repository. - Implements mutex lock mechanism for AI2D and GNNE modules. - Adds HARDLOCK_AI2D support in hardlock driver for mutual exclusion. - Implements poll operation for device status monitoring. - Updates documentation in bsp/README.md. Signed-off-by: ChuanN-sudo <[email protected]>
2025-12-26bsp: stm32f407-micu: add RTC support (#11086)DaiLingxiang
bsp: [stm32] add stm32f407-micu RTC support
2025-12-25[nxp/mcxa156] Fix the low-frequency PWM outputCXSforHPU
2025-12-24bsp: stm32f407-micu: add SDIO support (#11081)DaiLingxiang
Update bsp/stm32/stm32f407-micu/board/Kconfig Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/board/Kconfig
2025-12-22bsp: stm32f407-micu: add onboard spi flash support (#11065)DaiLingxiang
* bsp: stm32f407-micu: add onboard spi flash support * bsp(stm32f407-micu): cleanup SConscript formatting and dead code
2025-12-17fix: resolve QSPI compilation error and add CI guard for stm32l475-atk-pandoraEric Chan
- Fix function pointer type mismatch between drv_qspi.h and rt_qspi_device - Add qspi-flash.attach file for CI compilation guard - Optimize code with macros and inline adapter - Include all related bug fixes and configuration updates Fixes: #11036
2025-12-15[add] add gd32w553h-eval bspYaochenger
2025-12-15[finsh][cmd] add 'console' command to config consoleGuEe-GUI
Signed-off-by: GuEe-GUI <[email protected]>
2025-12-12[bsp][nxp][imx] Add FRDM-i.MX91 bsp #10570Siwei Xu
2025-12-04[libcpu-riscv]: [surpport SMP]: Add SMP support for qemu-virt64-riscvTm-C-mT
1.Add the necessary function declarations for SMP enablement and implement the corresponding functionalities, including rt_hw_secondary_cpu_up, secondary_cpu_entry, rt_hw_local_irq_disable, rt_hw_local_irq_enable, rt_hw_secondary_cpu_idle_exec, rt_hw_spin_lock_init, rt_hw_spin_lock, rt_hw_spin_unlock, rt_hw_ipi_send, rt_hw_interrupt_set_priority, rt_hw_interrupt_get_priority, rt_hw_ipi_init, rt_hw_ipi_handler_install, and rt_hw_ipi_handler. 2.In the two functions (rt_hw_context_switch_to and rt_hw_context_switch) in context_gcc.S, add a call to rt_cpus_lock_status_restore to update the scheduler information. 3.If the MMU is enabled, use the .percpu section and record different hartids by configuring special page tables; if the MMU is not enabled, record them directly in the satp register. Additionally, add dynamic startup based on core configuration.The .percpu section is only used when both ARCH_MM_MMU and RT_USING_SMP are enabled. However, there is a certain amount of space waste since no macro guard is added for it in the link script currently. 4.The physical memory of QEMU started in CI is 128MB, so RT_HW_PAGE_END is modified from the original +256MB to +128MB. Modify the SConscript file under the common64 directory to include common/atomic_riscv.c in the compilation process. Signed-off-by: Mengchen Teng <[email protected]>
2025-12-03[bsp][renesas] Add ra8p1-titan-board BSP.yans
2025-12-03[bsp/renesas][drivers] Added adaptation for ra8p1.yans
2025-12-01[bsp][stm32]:remove duplicated header includes for drv_stdio.hCYFS
2025-12-01[bsp][spi flash]: 优化GD32F470 SPI Flash初始化和UART0配置 (#10983)godmial
* feat(gd32): 优化GD32F470 SPI Flash初始化和UART0配置 主要修改： 1. SPI Flash初始化优化 - 添加可配置的SPI Flash自动初始化选项(BSP_USING_SPI_FLASH) - 支持按SPI总线独立配置Flash初始化(BSP_USING_SPIx_FLASH) - 避免SPI Flash初始化与其他SPI设备(如OLED、WIFI)冲突 - 添加SPI5 Flash支持 - 修改drv_spi_flash.c，仅在明确配置的SPI总线上初始化Flash 2. UART0配置修复 - 将UART0的AFIO默认值从AF1改为AF7 - 修复串口无响应问题 这些修改使得用户可以更灵活地配置SPI Flash初始化，避免自动初始化导致的设备冲突问题。 * feat(gd32): 解耦SPI Flash与SFUD的依赖关系
2025-11-30[bsp][hpm]:fix scons --distCYFS
2025-11-26[gd32/arm][bsp]: synchronous kconfig updatekurisaw
2025-11-26[gd32/arm][drivers]: general GD serial driver adapterkurisaw
2025-11-26[gd32/arm][drivers]: add support for the H7 series and optimize the GPIO driverkurisaw
2025-11-25bsp: k230: add dma support to the i2c driverZe-Hou
1. add dma support to the I2C driver to improve efficiency. Signed-off-by: Ze-Hou <[email protected]>
2025-11-22docs:[STM32][drv_gpio] Add detailed Doxygen comments for GET_PIN macrowdfk-prog
2025-11-22fix:[STM32][drv_can] Suppress unused variable warning in send error pathwdfk-prog
2025-11-16bsp: k230: add spi driverChuan
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an spi driver. Solution: Provide spi driver for the k230 platform in the RT-Thread repository. - Supports SPI0(OSPI) controller with 1/2/4/8 data lines. - Supports SPI1(QSPI0) and SPI2(QSPI1) controllers with 1/2/4 data lines. - Implements DMA-based transfers for OSPI, QSPI, and DSPI modes. - Falls back to standard IRQ-driven transfers for legacy SPI mode (single line). - Updates documentation in bsp/README.md Signed-off-by: ChuanN-sudo <[email protected]>
2025-11-13[bsp/xuantie][fix] 修正Bsp Kconfig配置MuChenger
2025-11-13feat:[stm32][can]: enhance control logic and refactor sendmsgwdfk-prog
2025-11-13clang format ignore migrationwestcity-YOLO
2025-11-13[BSP][Documentation] Add comprehensive BSP driver support summary table (#10925)R b b666
* List of RT-Thread BSP Support Additions.
2025-11-11bsp: add stm32f407-micu supportDailingxiang1
Update bsp/stm32/stm32f407-micu/rtconfig.py Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/rtconfig.h Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/project.uvproj Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/project.uvproj Co-authored-by: Copilot <[email protected]> Update bsp/stm32/stm32f407-micu/board/board.h Co-authored-by: Copilot <[email protected]> add ci Delete bsp/stm32/stm32f407-micu/project.uvgui.dlx modified: MAINTAINERS deleted: bsp/stm32/stm32f407-micu/figures/board.png.png deleted: bsp/stm32/stm32f407-micu/project.uvopt modified: bsp/stm32/stm32f407-micu/project.uvoptx modified: bsp/stm32/stm32f407-micu/project.uvprojx
2025-11-08[bsp][gd32] 串口 tx buf应该可以设置为0 (#10908)RyanCW
2025-11-08fix:stm32 can build error (#10909)CYFS
2025-11-07[Components] Remove vbus component and realview-a8-vmm libcpu (#10863)Copilot
* Initial plan * Remove vbus component and related code Co-authored-by: BernardXiong <[email protected]> --------- Co-authored-by: copilot-swe-agent[bot] <[email protected]> Co-authored-by: BernardXiong <[email protected]>
2025-11-07[bsp] [stm32] 添加鹿小班STM32H723开发板的BSP (#10842)Pcb-yun
* [bsp] [stm32] 添加鹿小班STM32H723开发板的BSP * fix(bsp): 修正链接脚本中的拼写错误并启用环境变量配置 修复链接脚本中'excetion'拼写错误为'execution' 启用rtconfig.py中的环境变量配置选项 * fix(bsp): 重新添加开发板IAR、GCC链接脚本 链接脚本中包含了所有寄存器，除flash与主sarm外其余寄存器已注释 * refactor(bsp): 移除冗余的SOC_STM32H723ZGT6配置选项
2025-11-07utilize the clang-format-ignore mechanism in bsp/nxpthomax2
2025-11-07[bsp][gd32][serial_v2] 增加GD32F5支持 (#10840)RyanCW
[bsp][gd32][serial_v2] 增加 GD32F5 支持
2025-10-30feature: k230: Add other existing drivers to the ci.attachconfig.yml file ↵Ze-Hou
(#10869) Resolve issue #10857 Signed-off-by: Ze-Hou <[email protected]>
2025-10-29[bsp/stm32h7]: Add STM32H7 fdcan driver. #10767PandaFeng
2025-10-29bsp: k230: add i2c driverZe-Hou
Requirement: The BSP for the k230 platform in the RT-Thread repository does not yet have an I2C driver. Solution: Provide I2C driver for the k230 platform in the RT-Thread repository. 1. support i2c master mode Signed-off-by: Ze-Hou <[email protected]>
2025-10-29[bsp/xuantie] 添加E901BSP #10836WangShun
2025-10-28移除HAL_Drivers/config/ra2a1HZY0117
2025-10-28feat:clang format ignore migrationache
2025-10-28[bsp][renesas]:pwm_config里新增对BSP_USING_PWM10到BSP_USING_PWM12的定 ↵hzy0117
义 (#10859) * [BSP][renesas][rsoc][fix]:移除HAL_Drivers/config/ra2a1,add pwm configuration items * 在pwm_config里新增对BSP_USING_PWM10到BSP_USING_PWM12的定义
2025-10-27修复gd32f5系列adc问题增加条件编译westcity-YOLO
2025-10-27cherryusb:Add the missing header files for bsp/frdm-mcxa156.rbb666
2025-10-27Fixed: ci build errors for hpm* bsp. (#10854)R b b666
2025-10-23[format][version]: synchronize bsp version configurationkurisaw
2025-10-21[BSP] xmc7100外设适配和RTDuino适配hydevcode
2025-10-21[bsp/nxp/mcx/mcxa] Fix UART clock configuration type mismatchYucai Liu
Fixed implicit type conversion warning in UART driver by correctly separating clock_name_t and clock_attach_id_t enum types. Changes: - Use kCLOCK_Fro12M (clock_name_t) for clock_src field - Keep kFRO12M_to_LPUARTx (clock_attach_id_t) for clock_attach_id field - Fix mcx_getc() to use correct status flag kLPUART_RxDataRegFullFlag This resolves the compiler warning: "implicit conversion from 'int' to 'clock_name_t' changes value from 16777216 to 0" Signed-off-by: Yucai Liu [email protected]
2025-10-21Remove rt_ktime_hrtimer_getcnt for hrtimerYonggang Luo
There is no user of it and also the return type is mismatch
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-24 00:46:17 +0000