| Age | Commit message (Collapse) | Author |
|---|
|
* add EK-RA2E2 support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Added pdma support for uart driver and a test file test_uart.c.
The test uses pdma to improve uart send speed,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
移除BSP软件I2C相关配置，软件I2C以集成至I2C设备驱动框架
|
|
|
|
statically created.
|
|
* [bsp/gd32] add gd32h759i-eval bsp
* [fix] Update gd32h759i-start config
* 添加BSP CI看护
* Apply suggestions from code review
Co-authored-by: Copilot <[email protected]>
* Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c
Co-authored-by: Copilot <[email protected]>
* Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c
Co-authored-by: Copilot <[email protected]>
* add .gitignore
---------
Co-authored-by: Copilot <[email protected]>
|
|
* bsp: all Renesas bsp support the nano one-click switch.
* fix pr conflicts.
|
|
|
|
[bsp/xuantie] E902 BSP适配生成CDK工程
[bsp/xuantie] E907 BSP适配生成CDK工程
[bsp/xuantie] C906 BSP适配生成CDK工程
[bsp/xuantie] C907 BSP适配生成CDK工程
[bsp/xuantie] C908 BSP适配生成CDK工程
[bsp/xuantie] C910 BSP适配生成CDK工程
[bsp/xuantie] R908 BSP适配生成CDK工程
[bsp/xuantie] R910 BSP适配生成CDK工程
[bsp/xuantie] R920 BSP适配生成CDK工程
|
|
|
|
|
|
* update nxp mcxa driver to support frdm-mcxa346
* update NXP bsp README
* update frdm-mcxa346 project
|
|
#10594#10602
|
|
Added a temperature sensor driver and a test file test_ts.c.
The test uses temperature sensor to measure the chip temperature,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
|
|
Originally, the interrupt definitions of various peripherals
were distributed in various peripheral drivers, resulting
in duplicate definitions. Now they are defined in one place.
Signed-off-by: Chen Wang <[email protected]>
|
|
Fixes: 62f3fb4ce550: fix(kernel)/improve(utest):fix the legacy issue related to the length of the object name version #10537
After this patch, if length of object name exceeds (RT_NAME_MAX - 1),
RTT will assert and oops when runing, but not in period of building.
Though I don't think it's a good solution, but don't want to argue more
about this.
Old RT_NAME_MAX is 8 for k230, and some object names, such as
"hwtimer0", which name length is 8, breaking the new rule.
Just update configuration of k230 bsp and increase RT_NAME_MAX from
8 to 16, which should be long enough for k230.
Signed-off-by: Chen Wang <[email protected]>
|
|
This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC,
providing essential DMA capabilities for peripheral data transfers.
Key features implemented:
1. PDMA channel request/release management
2. Channel start/stop control
3. Interrupt callback registration
4. Data transfer between device ports and DDR memory
The driver includes:
- Core driver implementation (drv_pdma.c/h)
- Build system support (SConscript)
- Basic test cases (test_pdma.c)
Tested with:
- PDMA channel request/release
- DDR to UART TX FIFO transfers
- UART RX FIFO to DDR transfers
Signed-off-by: eatvector <[email protected]>
|
|
* 添加了spim的底层驱动和设备驱动
* 添加了nrf52840 的spim底层驱动和设备驱动
* 添加了spim的底层驱动和设备驱动
* 添加了spim的底层驱动和设备驱动
* 代码规范
* 1. 在rt-thread\bsp\nrf5x\nrf52840\.ci\attachconfig\ci.attachconfig.yml中添加了spim的相关设置。
devices.spim:
kconfig:
- CONFIG_RT_USING_SPIM=y
- CONFIG_BSP_USING_SPIM=y
2. nrfx_dpim.h 注释中纠正了错误的拼写
3. 多个文件中：nrfx_spim.c drv_spim.c drv_spim.h 删减了多余的宏定义：USING_SPI_DMA
4. nrfx_spim.c中删除了DMA_TRANS_MIN_LEN，该宏定义定义了spi+dma最小传输字节，直接定义20。
|
|
* [bsp][stm32][drv_usart_v2] uart_isr不再使用链式调用，RXNE内循环读空，一些细节优化
* [componnents][drivers][serial_v2] 增加获取config接口，使用rt_tick_get_delta替代内部的时间绕回判断，写满丢弃策略rx接收数据错乱修复，clang-tidy和cppcheck审查优化
* [utest][drivers][serial_v2] 测试例程进行优化
* [bsp][stm32][drv_usart_v2] 撤回DMAMUX1修改
* [componnents][drivers][serial_v2] read和write不再返回-RT_ETIMEOUT改为已发送或读取的字节数，细节优化
* [utest][drivers][serial_v2] 增加单独的timeout测试，减少测试中的硬延时
* [utest][drivers][serial_v2] 漏提交的posix下标志位
* [utest][drivers][serial_v2] 优化测试例程
* [bsp][stm32][drv_usart_v2] transmit返回错误值，RXNE增加超时逻辑
* [componnents][drivers][serial_v2] 增加transmit错误处理，增加超时退出机制显式的避免死循环
* [componnents][drivers][serial_v2] 适配serial_v2和posix非libc标准库下的console和shell
|
|
* inital commit for FRDM-MCXA346 support
* format file
* add frdm-mcxa456 into bsp comople ci
* add some file according to copliot commments
|
|
|
|
适配Phytium开发板
|
|
|
|
|
|
|
|
Solution: gd32_uart_gpio_init 不开中断
等驱动框架初始化好fifo后通过 device_control 开中断
Signed-off-by: Yucai Liu <[email protected]>
|
|
issue (#10524)
* Modify the reference path of the header file in the middle section
* format
* Fix smart serial_v2 bypass compile error issue
* add allwinner/d1s ci
|
|
|
|
* rk3566 bsp:
* Add RK3566 Code (Forked from rt-thread/tree/master/bsp/rockchip/rk3500).
* Added to the original RK3566 documentation, more detailed usage instructions.
Signed-off-by: lipeng <[email protected]>
|
|
object name version #10537
|
|
Added a PWM driver and a test file test_pwm.c.
The test uses PWM to control the LED brightness,
to check if the driver works correctly.
Signed-off-by: XU HU <[email protected]>
|
|
|
|
[bsp][wch]:adapt wch risc serial_v2
|
|
|
|
|
|
|
|
|
|
Co-authored-by: wdfk-prog <[email protected]>
|
|
|
|
|
|
fix wch scons --dist
|
|
Initialization
Co-authored-by: wdfk-prog <[email protected]>
|
