| Age | Commit message (Collapse) | Author |
|---|
|
The names of the utest cases defined in their respective
modules have been updated.
Some utest case names are not yet in their respective modules
because their paths need to be finalized before their unique
names can be determined. Currently, these names do not
appear to conflict with the unified names. These include:
- utest cases still in examples
- bsp/qemu-virt64-riscv/applications/test/test_vector/test_vector.c.
The entire test case should probably be placed in libcpu/risc-v
rather than bsp.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
* add EK-RA2E2 support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Added pdma support for uart driver and a test file test_uart.c.
The test uses pdma to improve uart send speed,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
移除BSP软件I2C相关配置，软件I2C以集成至I2C设备驱动框架
|
|
|
|
statically created.
|
|
* [bsp/gd32] add gd32h759i-eval bsp
* [fix] Update gd32h759i-start config
* 添加BSP CI看护
* Apply suggestions from code review
Co-authored-by: Copilot <[email protected]>
* Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c
Co-authored-by: Copilot <[email protected]>
* Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c
Co-authored-by: Copilot <[email protected]>
* add .gitignore
---------
Co-authored-by: Copilot <[email protected]>
|
|
* bsp: all Renesas bsp support the nano one-click switch.
* fix pr conflicts.
|
|
|
|
[bsp/xuantie] E902 BSP适配生成CDK工程
[bsp/xuantie] E907 BSP适配生成CDK工程
[bsp/xuantie] C906 BSP适配生成CDK工程
[bsp/xuantie] C907 BSP适配生成CDK工程
[bsp/xuantie] C908 BSP适配生成CDK工程
[bsp/xuantie] C910 BSP适配生成CDK工程
[bsp/xuantie] R908 BSP适配生成CDK工程
[bsp/xuantie] R910 BSP适配生成CDK工程
[bsp/xuantie] R920 BSP适配生成CDK工程
|
|
|
|
|
|
* update nxp mcxa driver to support frdm-mcxa346
* update NXP bsp README
* update frdm-mcxa346 project
|
|
#10594#10602
|
|
Added a temperature sensor driver and a test file test_ts.c.
The test uses temperature sensor to measure the chip temperature,
to check if the driver works correctly.
Signed-off-by: XU HU [email protected]
|
|
|
|
Originally, the interrupt definitions of various peripherals
were distributed in various peripheral drivers, resulting
in duplicate definitions. Now they are defined in one place.
Signed-off-by: Chen Wang <[email protected]>
|
|
Fixes: 62f3fb4ce550: fix(kernel)/improve(utest):fix the legacy issue related to the length of the object name version #10537
After this patch, if length of object name exceeds (RT_NAME_MAX - 1),
RTT will assert and oops when runing, but not in period of building.
Though I don't think it's a good solution, but don't want to argue more
about this.
Old RT_NAME_MAX is 8 for k230, and some object names, such as
"hwtimer0", which name length is 8, breaking the new rule.
Just update configuration of k230 bsp and increase RT_NAME_MAX from
8 to 16, which should be long enough for k230.
Signed-off-by: Chen Wang <[email protected]>
|
|
This commit introduces the PDMA (Peripheral DMA) driver for K230 SoC,
providing essential DMA capabilities for peripheral data transfers.
Key features implemented:
1. PDMA channel request/release management
2. Channel start/stop control
3. Interrupt callback registration
4. Data transfer between device ports and DDR memory
The driver includes:
- Core driver implementation (drv_pdma.c/h)
- Build system support (SConscript)
- Basic test cases (test_pdma.c)
Tested with:
- PDMA channel request/release
- DDR to UART TX FIFO transfers
- UART RX FIFO to DDR transfers
Signed-off-by: eatvector <[email protected]>
|
|
* 添加了spim的底层驱动和设备驱动
* 添加了nrf52840 的spim底层驱动和设备驱动
* 添加了spim的底层驱动和设备驱动
* 添加了spim的底层驱动和设备驱动
* 代码规范
* 1. 在rt-thread\bsp\nrf5x\nrf52840\.ci\attachconfig\ci.attachconfig.yml中添加了spim的相关设置。
devices.spim:
kconfig:
- CONFIG_RT_USING_SPIM=y
- CONFIG_BSP_USING_SPIM=y
2. nrfx_dpim.h 注释中纠正了错误的拼写
3. 多个文件中：nrfx_spim.c drv_spim.c drv_spim.h 删减了多余的宏定义：USING_SPI_DMA
4. nrfx_spim.c中删除了DMA_TRANS_MIN_LEN，该宏定义定义了spi+dma最小传输字节，直接定义20。
|
|
* [bsp][stm32][drv_usart_v2] uart_isr不再使用链式调用，RXNE内循环读空，一些细节优化
* [componnents][drivers][serial_v2] 增加获取config接口，使用rt_tick_get_delta替代内部的时间绕回判断，写满丢弃策略rx接收数据错乱修复，clang-tidy和cppcheck审查优化
* [utest][drivers][serial_v2] 测试例程进行优化
* [bsp][stm32][drv_usart_v2] 撤回DMAMUX1修改
* [componnents][drivers][serial_v2] read和write不再返回-RT_ETIMEOUT改为已发送或读取的字节数，细节优化
* [utest][drivers][serial_v2] 增加单独的timeout测试，减少测试中的硬延时
* [utest][drivers][serial_v2] 漏提交的posix下标志位
* [utest][drivers][serial_v2] 优化测试例程
* [bsp][stm32][drv_usart_v2] transmit返回错误值，RXNE增加超时逻辑
* [componnents][drivers][serial_v2] 增加transmit错误处理，增加超时退出机制显式的避免死循环
* [componnents][drivers][serial_v2] 适配serial_v2和posix非libc标准库下的console和shell
|
|
* inital commit for FRDM-MCXA346 support
* format file
* add frdm-mcxa456 into bsp comople ci
* add some file according to copliot commments
|
|
|
|
适配Phytium开发板
|
|
|
|
|
|
|
|
Solution: gd32_uart_gpio_init 不开中断
等驱动框架初始化好fifo后通过 device_control 开中断
Signed-off-by: Yucai Liu <[email protected]>
|
|
issue (#10524)
* Modify the reference path of the header file in the middle section
* format
* Fix smart serial_v2 bypass compile error issue
* add allwinner/d1s ci
|
|
|
|
* rk3566 bsp:
* Add RK3566 Code (Forked from rt-thread/tree/master/bsp/rockchip/rk3500).
* Added to the original RK3566 documentation, more detailed usage instructions.
Signed-off-by: lipeng <[email protected]>
|
|
object name version #10537
|
|
Added a PWM driver and a test file test_pwm.c.
The test uses PWM to control the LED brightness,
to check if the driver works correctly.
Signed-off-by: XU HU <[email protected]>
|
|
|
|
[bsp][wch]:adapt wch risc serial_v2
|
|
|
|
|
|
|
|
|
|
Co-authored-by: wdfk-prog <[email protected]>
|
|
|
|
|
