| Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
|
|
|
|
基于mm32f3270系列由百问网自主设计的火龙果开发板的bsp
|
|
* Update drv_usart.h
CH32V307的串口1外设是对接在APB2桥上,其他串口均对接在APB1桥上
已完全测试,并发现一个问题,已修正。
|
|
* add ignore files and directories
* 消除编译警告;修正板级配置信息
|
|
* [pwm]Improve the code
* 将与bsp无关的代码移植到框架部分
* 添加注释
|
|
update README
|
|
* add ignore files and directories
* add flexcan support;fix build problem
* 优化格式,消除编译警告
* 增加can引脚分配;支持imxrt1170
* 优化格式
|
|
|
|
|
|
|
|
|
|
1、修复ksz8081.c编译错误;
2、修复rt1170网络驱动问题
|
|
解决 tms320f28379d bsp 启动的问题。主要改动如下。
修正context.s中汇编代码错误。在旧版的代码中,操作数为32位而汇编命令却使用了针对16位数据的命令MOV,导致程序在某些情况无法正常启动线程。
由于C28x的平台下,SP只支持16bit寻址,所以用于线程空间存放的heap以及ebss段都需要放在低16位的空间,针对这个问题修改了CMD文件。此外还增加基于CMD文件基于RAM的支持,方便调试。
新增rtdef.h中RT_SECTION,RT_USED,ALIGN和RT_WEAK的定义。旧版bsp中这些定义为空,导致INIT_EXPORT注册的函数失效。
修改程序启动代码,在程序入口直接调用原生启动代码
以上改动在LAUNCHXL-F28379D 通过了测试。
|
|
|
|
UART_FLAG_TC 不能在中断里CLEAR;
因为函数 static int stm32_putc(struct rt_serial_device *serial, char c)里发送完成后
while 循环等这个标志退出,中断服务函数CLEAR后,此处进入死循环
|
|
* 修改Kconfig的不足
* update gpio driver
* formatting code
|
|
增加ROMFS,FATFS和未来的LittleFS将挂载在ROMFS上
初步增加littlefs文件系统,尚未完全实现一键化配置
|
|
ch569w-evt: add usbhs device mode driver
* usbd driver tested with cdc_vcom, internal loopback
(can't run both MSH & usbd due to 16KB RAM limitation)
* reduce usrstack & main thread stack size for usbd test
* ch56x_uart.c : iron out UART0_PIN_ALT assignment
|
|
|
|
* add ch32v307 lib
* fix scons
|
|
[bsp][tms320f28379d] libc compatible
|
|
|
|
* Update README.md
* rename as max32660-evsys
Co-authored-by: Meco Man <[email protected]>
|
|
|
|
|
|
|
|
|
|
* compile_ok
Issues fixed:
(1) update .config: select FINSH_USING_SYMTAB
(2) add rt_size_t in rtconfig_project.h
(3) fix finsh problems of using sym table
(4) update .project to include ipc source codes.
Todo list:
(1) automate the build source selection of ccs and reconcile it with scons
* change compiler
* msh can run now
the key step is to swap the order of rt_interrupt_nest -- and RT_OBJECT_HOOK_CALL(rt_interrupt_leave_hook,()) in irq.c. This is an improvised solution and an issue has been raised.
* Update 2837x_FLASH_lnk_cpu1.cmd
The original one is also fine. Just to make it more rigorous since FSymTab is in data section.
* update readme.md
Complier selection and maintainer update.
Co-authored-by: YuQi <[email protected]>
|
|
* 完善can驱动中断处理
优化can波特率采样率,采样点在75%以上
增加新的can驱动宏定义支持,避免编译错误
* Update drv_can.c
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
* 增加千兆网络配置
* 适配最新1170SDK2.12版本
* 增加MAC层驱动配置
|
|
* 增加1170可操作的gpio数
* 修改默认引脚配置
* 增加千兆网络引脚配置
|
|
|
|
* 将swm320和swm341整合进synwit
|
|
|
|
|
|
attach https://github.com/RT-Thread/rt-thread/pull/5451
|
|
Fix BSP bug:
-Function naming conflict in drv_rtc.c, rename get/set_timestamp to imxrt_hp_get/set_timestamp, which conflicted with rtc.c/.h framework.
|
|
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md
* Update Captouch板载触摸按键配置说明.md
* [renesas/drv_wdt.c] Fix error code issues
[renesas/drv_i2c.c] add hardware i2c driver
* [update] drv_wdt.c,drv_i2c.c
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
增加1170系列SDRAM时钟配置
修复sdram中memheap自动初始化时机错误导致被assert的情况
Co-authored-by: Meco Man <[email protected]>
|
|
* Update Kconfig
增加RT1170双路网络选项
* Update SConscript
增加RTL8211F驱动选项支持
* Update SConstruct
去掉外设目录
* Add files via upload
增加PHY芯片RTL8211F驱动
* Update drv_rtl8211f.c
* format code
Co-authored-by: Meco Man <[email protected]>
|
|
|
|
|
|
|
|
report in slack group
|