| Age | Commit message (Collapse) | Author |
|---|
|
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <[email protected]>
* update
Signed-off-by: Fan YANG <[email protected]>
Co-authored-by: Meco Man <[email protected]>
|
|
华芯微特SWM341芯片的bsp支持包
* 修改dac.c函数名称错误
* delete swm320-lq100 bsp
* 修复sdio读写块的地址偏移问题
* add synwit swm341 bsp
* 修复gcc下启动文件错误
* 为测试用例添加说明
|
|
report in #4184
|
|
Co-authored-by: xinyi.gao <[email protected]>
|
|
failure
Some users' computer cannot find the path of VS and will cause failure. Just skip this step.
|
|
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes
* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566
|
|
this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).
- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
|
|
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md
* Update Captouch板载触摸按键配置说明.md
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
|
|
英飞凌 CY8CKIT-062S2-43012 BSP
|
|
|
|
add PWM driver, output checked with logic analyzer
spi_xfer() bug fix for cs_pin and message looping
uart pin_mode init moved to uart driver
|
|
https://club.rt-thread.org/ask/question/32d3a440402902f7.html
|
|
|
|
按照pinout布局图重新设计Arduino引脚布局和功能
- 目前PB0（D12, PWM）和PA15（D5，PWM）测试不通过
参考：https://github.com/stm32duino/Arduino_Core_STM32/issues/1082#issuecomment-634027716
|
|
of reset because INT pin could not be driven low or high.
|
|
* 优化imxrt的BSP下面的applications的Sconsript脚本
* add import os for sconscript in imxrt
|
|
* Use FreeRTOS wrapper
* Add console driver
* Add patch, .config. Update readme.
* Change date
|
|
* 对接RTdunio
|
|
https://github.com/RT-Thread/rt-thread/issues/6106
https://github.com/RT-Thread/rt-thread/issues/4467#issuecomment-850814143
|
|
|
|
|
|
[fix]mimxrt1170 Qspi flash bootup problems by loss of external flash conf and ivt header.
[add]green light instead printf on main.c.
|
|
|
|
* [simulator] fix some warnings
comes from https://github.com/RT-Thread/rt-thread/pull/5791
* [simulator] update kconfig
Co-authored-by: guozhanxin <[email protected]>
|
|
* 添加hc32f460系列外设WDT驱动
* format kconfig
* Update drv_wdt.c
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <[email protected]>
|
|
* [bsp/raspi3-32] fix some bug of funtion '__rt_ffs'
* Update trap.c
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
|
|
* ch569w-evt : add spi master driver, SPI0 tested
* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig
* Update bsp/wch/risc-v/ch569w-evt/board/Kconfig
Co-authored-by: Man, Jianting (Meco) <[email protected]>
|
|
pwm默认配置 (#6201)
* [bsp][stm32] f407-robomaster-c板, 添加stm32定时器8pwm默认配置
* tab -> space
* 取消DFS选定
Co-authored-by: Meco Man <[email protected]>
|
|
修改 F1/F4 配置文件uart改为uart1。
修改 F1/F4 main 打印内容。
|
|
|
|
|
|
WCH CH569W-R0-1v0 evt board bsp port, first version
dev/test under Ubuntu 20.04
toolchain from MounRiver_Studio_Community_Linux_x64_V120
tested drivers : SysTick, gpio, gpio interrupt, uart1 (RX interrupt, TX polling)
libcpu/risc-v/SConscript :
group includes rtconfig.CPU only if folder exists
libcpu/risc-v/common/cpuport.c/rt_hw_context_switch_interrupt() :
make it RT_WEAK for customization
|
|
Fix BSP bugs:
-Added Touch INT GPIO Init code to pin_mux.c
-Added new delay code for touch/video driver, using the rt-thread delay, in touchpad.c/.h
|
|
* [bsp/qemu-virt64-aarch64] RTC add hard alarm support
* [bsp/qemu-virt64-aarch64] Fixup VirtIO-GPU init buffer fail by cpu out-of-order execution
* [bsp/qemu-virt64-aarch64] Fixup VirtIO-NET transmit payload split
Add Virtio-GPU cursor demo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
