summaryrefslogtreecommitdiff
path: root/bsp
AgeCommit message (Collapse)Author
2022-11-21增加野火 启明6M5板级支持包 (#6616)ShaquilleLiu
* 增加 野火 启明6M5 板级支持包 * 修复串口引脚描述错误 * 上一版提交，UART端口改了，但是uart编号漏改 Co-authored-by: Liuxiequan <[email protected]>
2022-11-21[CAN]update struct can_filter_item and rt_can_msg (#6556)wdfk-prog
* 修改ry命令，已便于自定义保存路径 * modified: components/utilities/ymodem/ry_sy.c * 修复从被动错误恢复后发送返回异常 * 修复在自动重传模式下,ACK异常阻塞线程 - 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断 - 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。 * 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数 * formatting格式化代码 * update struct can_filter_item and rt_can_msg 1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index, 以便准确区分.采用宏定义兼容以前变量名. 2. 添加接收标识rxfifo,已指明是哪个RXFIFO. * 更正42M下的波特率 * 修复接收获取索引号错误 * 添加接收标识 * 更新注释 * 取消CANFD限制 * update struct can_filter_item and rt_can_msg
2022-11-21[stm32] 解决Error_Handler()函数在*_msp.c文件下报错的问题Meco Man
在用户头文件区增加#include <drv_common.h>即可
2022-11-21[stm32l475-pandora] select AHT10_USING_SENSOR_DEVICEMeco Man
2022-11-20[stm32f410][RTduino] 修改pins_arduino.c和Kconfig (#6629)lpy
2022-11-20修改ch32v307软件spi的宏Harrypotter-zhs
2022-11-18[arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件 (#6614)螺丝松掉的人
* [arduino][f411-blackpill] 已配置cubeMX，并生成pinout文件 Signed-off-by: 褚仕成 <[email protected]> * [arduino][f411-blackpill] 完善cubeMX配置 * 编辑 Kconfig 文件 * 完善Kconfig文件中PWM的配置 * 将rtduino的配置移至Onboard Peripheral Drivers * 使能SPI * Update Sconscript Signed-off-by: 褚仕成 <[email protected]> Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-11-17use rt_memcpy/rt_memset to replace memcpy/memsetMeco Man
2022-11-17format imxrt drver filesMeco Man
2022-11-17修复rtc驱动，实现掉电能保存时钟数据(硬件外接电池)xjy
2022-11-14[imxrt1176]Fix usb (#6589)xiao xie
修复USB驱动，实现imxrt1176平台usb host，支持usb3.0读写
2022-11-14Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.cmyshow2258
Modified components/drivers/usb/usbdevice/class/cdc_vcom.c 修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
2022-11-14[sensor] use arg to replace user_dataMeco Man
2022-11-14c28x sconsYunjie Gu
2022-11-13添加STM32F410 NUCLEO RTDUINO (#6613)lpy
* 添加STM32F410 NUCLEO RTDUINO * 修改stm32f410 nuleco RTDUINO * 修改stm32f410 nuleco RTDUINO * Update Sconscript Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-11-12修复SPI驱动不能使用RT_SPI_MODE_0与RT_SPI_MODE_2的错误。CLKPHA� ↵HEYAHONG
�设置工作模式时已设置,后面出现重复设置。
2022-11-12[stm32 f411] rename stm32f411-weact-blackpillMeco Man
2022-11-10[bsp/phytium] add phytium bsp to support e2000 bootup with smp (#6566)zhugengyu
add phytium board (E2000) bsp support usart support SMP with demo
2022-11-08修复flexspi配置语法错误xjy
2022-11-08[imxrt1170]修复SD卡作为引导器后，系统无法挂载SD卡的问题 ↵xiao xie
(#6600) * 修复SD卡作为引导器后，系统无法挂载SD卡的问题 * Update Kconfig Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-11-07修改I2C0_BUS_CONFIG定义错误xiaoxiaolisunny
修改drv_soft_i2c.h中I2C0_BUS_CONFIG定义错误问题。
2022-11-06[Kconfig] remove PKG_USING_SENSORS_DRIVERS and PKG_USING_TOUCH_DRIVERSMeco Man
2022-11-06[stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 (#6575)Man, Jianting (Meco)
* [stm32][tim/pwm] 抽出公共代码，防止日后演进出现分歧 * Update drv_tim.c
2022-11-05[rtduino] 修正pinout_arduino文件所在Group名称Meco Man
2022-10-30Modified bsp/stm32/libraries/HAL_Drivers/config/f4/dma_config.hmyshowtogo
Modified bsp/stm32/libraries/HAL_Drivers/drv_usart_v2.c 修复stm32的串口 dma配置
2022-10-30删除对pwm_config的判断，并初始化channel 为RT_NULLlinshire
2022-10-30[bsp] fix the return of the function(drv_pwm_control) in stm32 drv_pwmlinshire
2022-10-28Revert "提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)"linshire
This reverts commit a4eb5a5399068bc3e2a7548de26d1e54b203f828.
2022-10-28提交stm32 bsp drv_pwm.c里面的一个小建议 (#6517)100ask-Alen
在使用stm32的pwm驱动时，发现其初始化channel的时候是根据device->channel这个值去初始化的，device->channel这个值是在pwm_configh.h里面定义设置的，又根据rtt的pwm例程，和常规习惯，应该大多数人会更喜欢设置channel=1/2/3/4，而不是在pwm_configh.h中将channel设置为TIM_CHANNEL_1/2/3/4，因此建议drv_pwm.c做出PR中的修改。 在实际开发中，因pwm_configh.h的示例均是.channel=0，又没有做出解释说明要让.channel=TIM_CHANNEL_1/2/3/4的值，容易误操作导致没有成功输出PWM，这是我在实际开发中遇到的现实问题，因而提出此建议。
2022-10-27将驱动文件中判断RT_USING_XXX改为BSP_USING_XXX,解决了部分框� ↵linshire
�层与驱动层的混用
2022-10-26[ch32v307] support c++Meco Man
2022-10-25[compiler] 增加SConscript依赖标志 AddDepend (#6534)Man, Jianting (Meco)
* [compiler] 增加SConscript依赖标志 AddDepend * RT_USING_NEWLIB->RT_USING_NEWLIBC RT_USING_ARM_LIBC->RT_USING_ARMLIBC * 删除过时的板载测试例程 * [gd32] 移除无用的反汇编文件 * [bsp]移除老旧bsp中对RT_USING_NEWLIBC的手动宏定义
2022-10-24[ch32v307] 删掉无意义的memset重载 (#6561)linshire
2022-10-23replaced the judgement of RT_USING_XXX with BSP_USING, and add some… (#6554)linshire
* replaced the judgement of RT_USING_XXX with BSP_USING, and add some tips in Konfig about soft_i2c
2022-10-23FIX: [bsp][stm32]CAN从ACK错误恢复后发送异常 (#6511)wdfk-prog
* 修改ry命令，已便于自定义保存路径 * modified: components/utilities/ymodem/ry_sy.c * 修复从被动错误恢复后发送返回异常 * 修复在自动重传模式下,ACK异常阻塞线程 - 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断 - 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。 * 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数 * formatting格式化代码
2022-10-24[bug] 修复drv_usart_v2.cKurisaW
2022-10-22Update drv_usart.cItsGettingWorse
修复RX DMA 第一包收不到的bug
2022-10-22[bsp][ch32v307]补全PWM设备，并为每个PWM设备添加条件编译，� ↵self-confident neko
��少代码量 (#6548) * 新增硬件定时器功能 * 新增定时器功能 * Update Kconfig * Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_hwtimer.h Co-authored-by: Man, Jianting (Meco) <[email protected]> * Update Kconfig * 添加剩余的PWM设备，并为每个PWM设备添加条件编译，减少代码量 * Update drv_pwm.c * 根据建议进行修改 * 已根据建议修改 * Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c Co-authored-by: Man, Jianting (Meco) <[email protected]> * Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.h Co-authored-by: Man, Jianting (Meco) <[email protected]> * Update bsp/wch/risc-v/Libraries/ch32_drivers/drv_pwm.c Co-authored-by: Man, Jianting (Meco) <[email protected]> Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-10-21新增CH32V307的硬件定时器功能 (#6545)self-confident neko
新增CH32V307的硬件定时器功能，并在CH32V307V-R1-1V0板卡上进行了测试。
2022-10-20[stm32-artpi-h750]去除冗余代码 与本文件36行重复 (#6522)spaceman
2022-10-20[stm32f103-fire-arbitrary] support nandflash K9F1G08U0E && LPM init && ↵mingmiaojing
partition create && partition read/write
2022-10-20[bsp/stm32] format codeNU-LL
2022-10-20[bsp/stm32] upgrade to rt-thread 5.0NU-LL
2022-10-20[bsp/stm32] add weact mini stm32h7xx board bspNU-LL
2022-10-19[bsp][c28x] add support to not disable global interrupt in context-switch to ↵Yunjie Gu
enable zero-latency isr for critical interrupts.
2022-10-19[n32] add CI queueMeco Man
2022-10-19[n32] 增加多个BSP支持 (#6543)NationsHuanghanbin
add bsp n32g43xcl-stb,n32g45xcl-stb,n32g45xml-stb,n32g45xrl-stb,n32g457qel-stb,n32l40xcl-stb,n32l43xml-stb,n32l43xrl-stb,n32l436_evb,n32wb45xl-evb
2022-10-19[bsp][ch32v307]增加软件spi驱动 (#6532)zhaohaisheng
2022-10-18[ch32v307][readme] 增加vscode编译介绍 (#6540)Man, Jianting (Meco)
2022-10-17[ch32v307] update readme (#6529)Man, Jianting (Meco)
* [ch32v307] update Chinese readme * add English readme
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-29 15:43:49 +0000