summaryrefslogtreecommitdiff
path: root/bsp
AgeCommit message (Collapse)Author
2022-08-30修复imxrt除1170系列外bsp网络驱动编译错误xjy
2022-08-29 修复imxrt1170网络驱动问题 (#6342)xjy198903
1、修复ksz8081.c编译错误； 2、修复rt1170网络驱动问题
2022-08-29tms320f28379d fix init (#6343)YuQi
解决 tms320f28379d bsp 启动的问题。主要改动如下。 修正context.s中汇编代码错误。在旧版的代码中，操作数为32位而汇编命令却使用了针对16位数据的命令MOV，导致程序在某些情况无法正常启动线程。 由于C28x的平台下，SP只支持16bit寻址，所以用于线程空间存放的heap以及ebss段都需要放在低16位的空间，针对这个问题修改了CMD文件。此外还增加基于CMD文件基于RAM的支持，方便调试。 新增rtdef.h中RT_SECTION，RT_USED，ALIGN和RT_WEAK的定义。旧版bsp中这些定义为空，导致INIT_EXPORT注册的函数失效。 修改程序启动代码，在程序入口直接调用原生启动代码 以上改动在LAUNCHXL-F28379D 通过了测试。
2022-08-27[drv_usart]完善ch32的串口驱动。 (#6336)liYang~
2022-08-25bug：winfenggao
UART_FLAG_TC 不能在中断里CLEAR; 因为函数 static int stm32_putc(struct rt_serial_device *serial, char c)里发送完成后 while 循环等这个标志退出，中断服务函数CLEAR后，此处进入死循环
2022-08-25[drv_gpio]为ch32完善gpio驱动 (#6334)liYang~
* 修改Kconfig的不足 * update gpio driver * formatting code
2022-08-24[stm32l4-pandora] 整理文件系统Meco Man
增加ROMFS，FATFS和未来的LittleFS将挂载在ROMFS上 初步增加littlefs文件系统，尚未完全实现一键化配置
2022-08-24ch569w-evt: add usbhs device mode driver (#6330)emuzit
ch569w-evt: add usbhs device mode driver * usbd driver tested with cdc_vcom, internal loopback (can't run both MSH & usbd due to 16KB RAM limitation) * reduce usrstack & main thread stack size for usbd test * ch56x_uart.c : iron out UART0_PIN_ALT assignment
2022-08-23[bsp]添加ch32v307vct6 (#6331)liYang~
2022-08-23[bsp]添加ch32v307需要的库文件 (#6329)liYang~
* add ch32v307 lib * fix scons
2022-08-22Merge pull request #6326 from OpenPowerware/masterMan, Jianting (Meco)
[bsp][tms320f28379d] libc compatible
2022-08-22libc compatibleYunjie Gu
2022-08-22[bsp/maxium/max3660]Update README.md (#6323)supperthomas
* Update README.md * rename as max32660-evsys Co-authored-by: Meco Man <[email protected]>
2022-08-22[bsp] update esp32 Kconfig (#6218)Man, Jianting (Meco)
2022-08-22[rtduino] remove libraries dependenciesMeco Man
2022-08-22[stm32f407-explorer][fs] 优化文件系统选项配置Meco Man
2022-08-22[fal] PKG_USING_FAL -> RT_USING_FALMeco Man
2022-08-20[bsp][tms320f28379d] Fix compile ti (#6254)Yunjie Gu
* compile_ok Issues fixed: (1) update .config: select FINSH_USING_SYMTAB (2) add rt_size_t in rtconfig_project.h (3) fix finsh problems of using sym table (4) update .project to include ipc source codes. Todo list: (1) automate the build source selection of ccs and reconcile it with scons * change compiler * msh can run now the key step is to swap the order of rt_interrupt_nest -- and RT_OBJECT_HOOK_CALL(rt_interrupt_leave_hook,()) in irq.c. This is an improvised solution and an issue has been raised. * Update 2837x_FLASH_lnk_cpu1.cmd The original one is also fine. Just to make it more rigorous since FSymTab is in data section. * update readme.md Complier selection and maintainer update. Co-authored-by: YuQi <[email protected]>
2022-08-20[n32g45x] bsp 完善can驱动中断处理 (#6313)chenbin
* 完善can驱动中断处理 优化can波特率采样率，采样点在75%以上 增加新的can驱动宏定义支持，避免编译错误 * Update drv_can.c Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-08-17[nxp][imxrt1170] format filesMeco Man
2022-08-17[nxp 1170] Update network (#6299)v4.1.1-betaxjy198903
* 增加千兆网络配置 * 适配最新1170SDK2.12版本 * 增加MAC层驱动配置
2022-08-17Update 1170 gpios (#6298)xjy198903
* 增加1170可操作的gpio数 * 修改默认引脚配置 * 增加千兆网络引脚配置
2022-08-17[nxp][imxrt1170]Fix building problem (#6297)xjy198903
2022-08-16将swm320和swm341整合进synwit (#6290)woody
* 将swm320和swm341整合进synwit
2022-08-16update the project for RT-Thread_V4.1.1liuxianliang
2022-08-16[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORMMeco Man
2022-08-16[armclang] 使用__clang__代替__CLANG_ARMMeco Man
attach https://github.com/RT-Thread/rt-thread/pull/5451
2022-08-15Fix BSP/imxrt/imxrt1060-nxp-evk: RTC Driver issue (#6283)Not Black Magic
Fix BSP bug: -Function naming conflict in drv_rtc.c, rename get/set_timestamp to imxrt_hp_get/set_timestamp, which conflicted with rtc.c/.h framework.
2022-08-15[[renesas/drivers] Fix error code issues 6183.Add hardware i2c driver. (#6279)Sherman
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md * Update Captouch板载触摸按键配置说明.md * [renesas/drv_wdt.c] Fix error code issues [renesas/drv_i2c.c] add hardware i2c driver * [update] drv_wdt.c,drv_i2c.c Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-08-15[imxrt] 消除编译警告xjy198903
2022-08-15Update sdram (#6280)xjy198903
增加1170系列SDRAM时钟配置 修复sdram中memheap自动初始化时机错误导致被assert的情况 Co-authored-by: Meco Man <[email protected]>
2022-08-14增加双网口配置选项，增加phy8211F 驱动 (#6278)xjy198903
* Update Kconfig 增加RT1170双路网络选项 * Update SConscript 增加RTL8211F驱动选项支持 * Update SConstruct 去掉外设目录 * Add files via upload 增加PHY芯片RTL8211F驱动 * Update drv_rtl8211f.c * format code Co-authored-by: Meco Man <[email protected]>
2022-08-14[nxp] move phy driver into drivers folderMeco Man
2022-08-14[stm32] add missing voidMeco Man
2022-08-14[simulator] exit()函数改为exit(1)Meco Man
2022-08-14[nxp][link script] format issueMeco Man
report in slack group
2022-08-13[DeviceDriver] Add CANFD support and correct typos (#5912)Fan Yang
* Add CANFD support and correct typos - Added CANFD required fields to can.h - Fixed typos in can.h and can.c - Corrected all the projects affected by the typo - Fixed wrong line-ending in some affected can driver files Signed-off-by: Fan YANG <[email protected]> * update Signed-off-by: Fan YANG <[email protected]> Co-authored-by: Meco Man <[email protected]>
2022-08-13add synwit swm341 bsp (#6235)woody
华芯微特SWM341芯片的bsp支持包 * 修改dac.c函数名称错误 * delete swm320-lq100 bsp * 修复sdio读写块的地址偏移问题 * add synwit swm341 bsp * 修复gcc下启动文件错误 * 为测试用例添加说明
2022-08-13[imxrt] fix gpio interrupt bug in drv_gpio.cMeco Man
report in #4184
2022-08-13[imxrt1170] update enet (#6244)Man, Jianting (Meco)
Co-authored-by: xinyi.gao <[email protected]>
2022-08-13[simulator][rtconfig.py] fix the problem of path cannot be find and cause ↵Meco Man
failure Some users' computer cannot find the path of VS and will cause failure. Just skip this step.
2022-08-13[lvgl] remove suareline studio specific support for imxrt1060 (#6261)Man, Jianting (Meco)
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes * [lvgl] remove specific suppport for imxrt1060 https://github.com/lvgl/lvgl/pull/3566
2022-08-13[imxrt1060] fix a tiny problmeMeco Man
this is report in slack group: - I had to do a small fix in board/linker_scripts/link.lds file. line 81, should be: ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data); (add a space between ivt_begin and "=“). - For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
2022-08-13[renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md (#6227)Sherman
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md * Update Captouch板载触摸按键配置说明.md Co-authored-by: Man, Jianting (Meco) <[email protected]>
2022-08-13[NXP]升级RT1170-EVK开发板SDK2.12版本(#6264)xjy198903
2022-08-11[bsp]stm32l475-atk-pandora update readme, .gitignorechinky
2022-08-09【BSP】CY8CKIT-062S2-43012 (#6237)Rbb666
英飞凌 CY8CKIT-062S2-43012 BSP
2022-08-09add hwtimer device (#6230)qipingqiu
2022-08-09ch569w-evt : add pwm driver, and spi_xfer bug fix (#6240)emuzit
add PWM driver, output checked with logic analyzer spi_xfer() bug fix for cs_pin and message looping uart pin_mode init moved to uart driver
2022-08-08[gd32] 修复串口引脚定义错误的问题Meco Man
https://club.rt-thread.org/ask/question/32d3a440402902f7.html
generated by cgit v1.3.1 (git 2.54.0) at 2026-10-29 21:06:59 +0000