| Age | Commit message (Collapse) | Author |
|---|
|
|
|
- 硬件i2c主机接收驱动采用方案B，但不支持接收小于3字节，现修复该问题
- 增加方案A。
|
|
- 在Kconfig中添加BSP_USING_PWM和BSP_USING_HWTIMER配置项
- 修正PWM时钟获取逻辑，使其能正确得到APB1/APB2上的定时器时钟源频率，添加在pwm结构体通道引脚资源配置项
- 修改硬件定时器初始化逻辑，修正定时器中断处理函数，适配GD32F4xx系列
- 在main.c中添加hwtimer_test和pwm_test测试函数
- 修复PWM和硬件定时器的依赖关系配置
|
|
|
|
|
|
Requirement: The BSP for the k230 platform in the RT-Thread repository
does not yet have an I2C driver.
Solution: Provide I2C driver for the k230 platform in the RT-Thread
repository.
1. support i2c master mode
Signed-off-by: Ze-Hou <[email protected]>
|
|
|
|
|
|
|
|
义 (#10859)
* [BSP][renesas][rsoc][fix]:移除HAL_Drivers/config/ra2a1,add pwm configuration items
* 在pwm_config里新增对BSP_USING_PWM10到BSP_USING_PWM12的定义
|
|
|
|
|
|
|
|
|
|
|
|
Fixed implicit type conversion warning in UART driver by correctly
separating clock_name_t and clock_attach_id_t enum types.
Changes:
- Use kCLOCK_Fro12M (clock_name_t) for clock_src field
- Keep kFRO12M_to_LPUARTx (clock_attach_id_t) for clock_attach_id field
- Fix mcx_getc() to use correct status flag kLPUART_RxDataRegFullFlag
This resolves the compiler warning:
"implicit conversion from 'int' to 'clock_name_t' changes value from 16777216 to 0"
Signed-off-by: Yucai Liu [email protected]
|
|
There is no user of it and also the return type is mismatch
|
|
|
|
|
|
|
|
* [bsp][renesas][ra4m1-ek] add a new bsp for ra4m1-ek board
* [bsp][renesas][ra4m1-ek] fix can driver compile problem
* [bsp][renesas][ra4m1-ek] bsp code format
* [bsp][renesas][ra4m1-ek] reset file status to original generated by RASC
* [bsp][renesas][ra4m1-ek] support RT-Thread Nano
* [bsp][renesas][ra4m1-ek] make it mini support for GPIO && USART
* [bsp][renesas][ra4m1-ek] make it compilable under the GCC compiler
* [bsp][renesas][ra4m1-ek] remove component RT_USING_CPLUSPLUS
* [bsp][renesas][ra4m1-ek] reduce bsp peripheral device driver
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
In 66448d9e96 "utest: smp_call: move from example to components/drivers/smp_call"
UTEST_SMP_CALL_FUNC was replaced with RT_UTEST_SMP_CALL_FUNC.
However, some files are forgot to do this replacement, so this patch address
this.
Note: In .config, lines like "# CONFIG_XXX is not set" do not need
to be modified; they are comments. Furthermore, for BSPs, running
"scons --menuconfig" and save the config will automatically replace
them. Therefore, no modification is necessary in this case.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
remove auto generated cconfig.h
|
|
|
|
|
|
[cpp_check.py 80 INFO] bsp/w60x/drivers/drv_rtc.c:58:11: error: Syntax Error: AST broken, binary operator '&=' doesn't have two operands. [internalAstError]
[cpp_check.py 80 INFO] libcpu/arm/s3c24x0/rtc.c:34:12: error: Expression 'RTCCON|=RTCCON|=0x01' depends on order of evaluation of side effects [unknownEvaluationOrder]
|
|
next_delay should be rt_tick_t
Use time_t for RT_DEVICE_CTRL_RTC_GET_TIME
|
|
针对不同的 Aarch64 BSP 针对 KERNEL_VADDR_START 宏定义进行区分
|
|
|
|
|
|
* [fix] 更新e906的以BSP导入RT-Studio相关文件
|
|
functionality
- Added support for non-blocking mode CAN message sending, including software ring buffer management and dynamic memory allocation options.
- Improved related comments and error handling.
- Updated example code to demonstrate the usage of both blocking and non-blocking sending modes, and corrected some structure field naming and macro definitions.
|
|
|
|
|
|
Many modules' utests currently don't support enabling all
tests at once. Furthermore, some modules' tests are complex,
for example due to their numerous dependencies on other
modules. This makes it nearly impossible to enable all
tests with a single global switch. Consequently, the
previously defined `RT_UTEST_USING_ALL_CASES` has lost
its original meaning.
We recommend deprecating this configuration switch. If a
module needs to enable a group of functional tests through
its own configuration, this local enable all switch should
be implemented by the module itself, and a global RTT enable
switch will no longer be provided.
If such a requirement arises in the future, we recommend
careful design, especially considering how to ensure that
turning on a single switch enables all dependencies for
all involved modules for ease of use.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
Otherwise report runtime error:
[E/kernel.obj] Object name sys workq exceeds RT_NAME_MAX=8, consider increasing RT_NAME_MAX.
(obj_name_len <= RT_NAME_MAX - 1) assertion failed at function:rt_object_allocate, line number:520
Increase the value of RT_NAME_MAX to 16 for c906B.
The value of RT_NAME_MAX for BSP of C906L and ARM core already meet
the requirement of more than 8.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
int/rt_int32_t
|
|
bsp/allwinner/libraries/sunxi-hal/hal/source/sdmmc/osal/os/RT-Thread/os_timer.c call to RT_TIMER_CTRL_SET_TIME
RT_TIMER_CTRL_SET_TIME expects a pointer to rt_tick_t (ticks).
period_tick is derived from periodMS (milliseconds) via rt_tick_from_millisecond
to ensure correct units are passed.
|
|
|
|
- upgraded bsp to v1.10.0
- moved hpm_sdk to rt-thread package
- added support for hpm6p00evk and hpm5e00evk
Signed-off-by: Fan YANG <[email protected]>
|
|
|
|
|
