| Age | Commit message (Collapse) | Author |
|---|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
* [sdio][dm] import Kconfig for DM
Signed-off-by: GuEe-GUI <[email protected]>
* [sdio] fixup IRQ and mmcsd threads' stack size default
Signed-off-by: GuEe-GUI <[email protected]>
* [sdio][dm] Support DM mode
1. Support features read by DM.
2. Support regulator API in drivers.
3. Support send tuning option CMD.
4. Replace `switch_uhs_voltage` by `signal_voltage_switch`.
Signed-off-by: GuEe-GUI <[email protected]>
* [dm][sdhci] Cleanup the SDHCI
Signed-off-by: GuEe-GUI <[email protected]>
* [sdio][dm] add new SDIO/SDHCI drivers
1. SDHCI support on PCI bus
2. Synopsys DesignWare MMC Family(MMIO/PCI)
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
1. Board level reset or poweroff
2. Power supply class
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Some ARCH not has std cache ops, such as RISC-V
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Hardware spinlock modules provide hardware assistance for
synchronization and mutual exclusion between heterogeneous processors
and those not operating under a single, shared operating system.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
Signed-off-by: GuEe-GUI <[email protected]>
|
|
issue (#10524)
* Modify the reference path of the header file in the middle section
* format
* Fix smart serial_v2 bypass compile error issue
* add allwinner/d1s ci
|
|
|
|
|
|
1. Add PCI include in rtdevice.h
2. Fixup `RT_KEY_ENABLED` loss.
3. remove waring type of `dw_pcie_ep_get_func_from_ep` return.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Thermal drivers offer a generic mechanism for thermal management.
Usually it's made up of one or more thermal zones and cooling devices.
Each thermal zone contains its own temperature, trip points, and cooling devices.
All platforms with ACPI or OFW thermal support can use this driver.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Provides general LED control API and drivers.
It can work on PWM, GPIO and Syscon...
Signed-off-by: GuEe-GUI <[email protected]>
|
|
1. Add the regulator driver framework.
2. Add the generic voltage and current regulator API support
for drivers.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Add ACHI drivers to support some old platform
driver such as SATA.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support reset controller
Reset controllers are central units that control
the reset signals to multiple peripherals.
The reset controller API is split into two parts:
1. The consumer driver interface, which allows
peripheral drivers to request control over
their reset input signals
2. The reset controller driver interface
which is used by drivers for reset controller devices to
register their reset controls to provide them to the consumers.
* [RESET/SIMPLE] Support simple reset
Currently this driver supports:
- Altera SoCFPGAs
- ASPEED BMC SoCs
- Bitmain BM1880 SoC
- Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- SiFive FU740 SoCs
- Sophgo SoCs
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support hardware mailbox
* [MAILBOX/PIC] Add PIC Mailbox drivers.
The mailbox device(s) may be instantiated in one of three equivalent way:
Device Tree node, eg.:
```dts
interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <1>;
};
pic_mailbox@10000 {
compatible = "rt-thread,pic-mailbox";
reg = <0x10000 0x100>;
position = <0>;
interrupts = <34>;
peer-interrupts = <35>;
uid = <0>;
#mbox-cells = <1>;
};
```
Signed-off-by: GuEe-GUI <[email protected]>
|
|
This framework will be of use only to devices that use
external PHY (PHY functionality is not embedded within the controller).
Use in PCIE, USB, HDMI, DP...
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support NVME
1. Support PRP and SGL (>= NVME v1.1) transport.
2. Support MSI/MSI-X for IO queues.
3. Support NVME on PCI.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support block for SCSI
1. Support SD and CD-ROM.
2. SD will port to UFS and ATA device.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
1. DMA pool management for platform.
2. DMA engine driver API.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
[DM/FEATURE] Support IIO (Industrial I/O)
Signed-off-by: GuEe-GUI <[email protected]>
|
|
1. Disk and blk device management.
2. Support partitions probe auto.
3. Support DFS and user mode fops, ioctl.
4. Add a cmd for blk info.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
MFD (Multifunction device) with System Controller Register Read/Write.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
old phy bus is too simple add phy_bus is not adapt rt_bus framework,so writer a stronger phy bus framework.
here is my commit message:
add mdio bus and phy bus to kernel,the phy bus use rt_bus framewok ,driver writer can write phy_driver first .when mac driver need to use phy they can register phy_device and pjhy_devie will serach for driver which match by uid and mask,if no driver match with the device that you register,phy_bus will return the genphy to you device,the genphy driver is the general driver for phy,so you can use it but it can not support the capcity of chip it may be cause performance is not up to peak
|
|
https://github.com/RT-Thread/rt-thread/pull/9420
|
|
|
|
* [Feature] Power domain for device
1.Support device power on/off.
2.Support attach/detach device.
3.Support power domain driver api.
Signed-off-by: GuEe-GUI <[email protected]>
* [DM/platform] Enhanced platform bus
1.Add power domain for device.
2.Support `remove` and `shutdown` bus interface.
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
For some CPU memory access devices, that the drivers
will find memory and CPU affinity to config device.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
Signed-off-by: xqyjlj <[email protected]>
Signed-off-by: Shell <[email protected]>
Co-authored-by: xqyjlj <[email protected]>
|
|
|
|
|
|
|
|
|
|
We support OFW API to replace fdt old API, and add
IRQ, IO, Platform-Bus, CPUs ... OFW node contorl.
To support work with Device Tree or ACPI in drivers
that use IRQ, we make a programmable interrupt
controller driver's model.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
We add the device name and id set api in DM, now driver
could set name like sprintf without know how many devices
it is.
The misc.h and byteorder.h add some macros to developers
that they always use in drivers.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
|
|
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
|
|
|
|
|
2. 优化rt_sensor_close函数，polling模式下不需要操作和rt_pin_irq_enable函数
3. 优化rt_device_register和sensor_polling的LOG信息
4. 修复sensor_polling函数打开设备时的标志错误的问题
|
|
�头文件也包含了sensor.h，简化应用层调用sensor模块
|
|
|
