| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
1. Add PCI include in rtdevice.h
2. Fixup `RT_KEY_ENABLED` loss.
3. remove waring type of `dw_pcie_ep_get_func_from_ep` return.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Thermal drivers offer a generic mechanism for thermal management.
Usually it's made up of one or more thermal zones and cooling devices.
Each thermal zone contains its own temperature, trip points, and cooling devices.
All platforms with ACPI or OFW thermal support can use this driver.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Provides general LED control API and drivers.
It can work on PWM, GPIO and Syscon...
Signed-off-by: GuEe-GUI <[email protected]>
|
|
1. Add the regulator driver framework.
2. Add the generic voltage and current regulator API support
for drivers.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
Add ACHI drivers to support some old platform
driver such as SATA.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support reset controller
Reset controllers are central units that control
the reset signals to multiple peripherals.
The reset controller API is split into two parts:
1. The consumer driver interface, which allows
peripheral drivers to request control over
their reset input signals
2. The reset controller driver interface
which is used by drivers for reset controller devices to
register their reset controls to provide them to the consumers.
* [RESET/SIMPLE] Support simple reset
Currently this driver supports:
- Altera SoCFPGAs
- ASPEED BMC SoCs
- Bitmain BM1880 SoC
- Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- SiFive FU740 SoCs
- Sophgo SoCs
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support hardware mailbox
* [MAILBOX/PIC] Add PIC Mailbox drivers.
The mailbox device(s) may be instantiated in one of three equivalent way:
Device Tree node, eg.:
```dts
interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <1>;
};
pic_mailbox@10000 {
compatible = "rt-thread,pic-mailbox";
reg = <0x10000 0x100>;
position = <0>;
interrupts = <34>;
peer-interrupts = <35>;
uid = <0>;
#mbox-cells = <1>;
};
```
Signed-off-by: GuEe-GUI <[email protected]>
|
|
This framework will be of use only to devices that use
external PHY (PHY functionality is not embedded within the controller).
Use in PCIE, USB, HDMI, DP...
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support NVME
1. Support PRP and SGL (>= NVME v1.1) transport.
2. Support MSI/MSI-X for IO queues.
3. Support NVME on PCI.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
* [DM/FEATURE] Support block for SCSI
1. Support SD and CD-ROM.
2. SD will port to UFS and ATA device.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
1. DMA pool management for platform.
2. DMA engine driver API.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
[DM/FEATURE] Support IIO (Industrial I/O)
Signed-off-by: GuEe-GUI <[email protected]>
|
|
1. Disk and blk device management.
2. Support partitions probe auto.
3. Support DFS and user mode fops, ioctl.
4. Add a cmd for blk info.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
MFD (Multifunction device) with System Controller Register Read/Write.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
old phy bus is too simple add phy_bus is not adapt rt_bus framework,so writer a stronger phy bus framework.
here is my commit message:
add mdio bus and phy bus to kernel,the phy bus use rt_bus framewok ,driver writer can write phy_driver first .when mac driver need to use phy they can register phy_device and pjhy_devie will serach for driver which match by uid and mask,if no driver match with the device that you register,phy_bus will return the genphy to you device,the genphy driver is the general driver for phy,so you can use it but it can not support the capcity of chip it may be cause performance is not up to peak
|
|
https://github.com/RT-Thread/rt-thread/pull/9420
|
|
|
|
* [Feature] Power domain for device
1.Support device power on/off.
2.Support attach/detach device.
3.Support power domain driver api.
Signed-off-by: GuEe-GUI <[email protected]>
* [DM/platform] Enhanced platform bus
1.Add power domain for device.
2.Support `remove` and `shutdown` bus interface.
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
|
|
For some CPU memory access devices, that the drivers
will find memory and CPU affinity to config device.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
Signed-off-by: xqyjlj <[email protected]>
Signed-off-by: Shell <[email protected]>
Co-authored-by: xqyjlj <[email protected]>
|
|
|
|
|
|
|
|
|
|
We support OFW API to replace fdt old API, and add
IRQ, IO, Platform-Bus, CPUs ... OFW node contorl.
To support work with Device Tree or ACPI in drivers
that use IRQ, we make a programmable interrupt
controller driver's model.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
We add the device name and id set api in DM, now driver
could set name like sprintf without know how many devices
it is.
The misc.h and byteorder.h add some macros to developers
that they always use in drivers.
Signed-off-by: GuEe-GUI <[email protected]>
|
|
|
|
|
|
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
|
|
|
|
|
2. 优化rt_sensor_close函数，polling模式下不需要操作和rt_pin_irq_enable函数
3. 优化rt_device_register和sensor_polling的LOG信息
4. 修复sensor_polling函数打开设备时的标志错误的问题
|
|
�头文件也包含了sensor.h，简化应用层调用sensor模块
|
|
|
|
抽象了PHY的设备模型，在components中增加了PHY设备的相关代码以及KCONFIG配置和SConscript脚本
2. 在IMXRT的Libraries中增加了peripherals目录，用于具体型号的设备驱动相关的代码的实现，不应与MCU的平台相关，实现PHY的设备对象中的相关接口。
3. 修改了BSP中的Sconstruct文件，增加了peripherals目录的构建
4. 修改了KEIL环境的SCT文件，用于实现以太网功能
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
